Gear shaper

TOS Čelákovice OHO 20

Condition: used, functionality: fully functional, Year of construction: 2001, Press force 85 t, Bending length 2050 mm, Distance between uprights 1750 mm, Control DELEM, Stroke 215 mm, Throat depth 410 mm, Total power 13 kW, Weight 8,750 kg, Machine dimensions 3190 x 2100 x 2375 mm Nedpfx Aow Imq Reb Aedc

Year of construction: 2002, condition: used, Balpe SAS model: 9PL/20 serial: 88 Nedpob Uanqofx Ab Asdc Stainless, 9 electrically heated angled plate with, 200mm diameter, adjustable temperature.

Condition: defective spare-parts repository (used), Year of construction: 1997, machine/vehicle number: 885258, Defective hydraulic CNC press brake Offer 25514 Technical data: Ndjdpfox Ew Dqsx Ab Ajc - max. working length 3060 mm - distance between uprights 2690 mm - max. pressing force 1300 kN - max. distance table / ram 370 mm - upright overhang 410 mm - ram stroke 215 mm - stroke speeds - downward speed, no load max. 200 mm/sec - upward speed 135 mm/sec - downward pressing speed 1 to 11 mm/sec - total drive power 18 kW - pneumatic connection 6 bar - space requirement approx. W 3800 x H 2400 x D 2400 mm - weight approx. 11500 kg - includes: - with 6-axis CNC control DELEM - two-hand control panel with foot switch - crowning device - controlled back gauge with height adjustment 5 - 860 mm - hydraulic upper and lower tool clamping - die table movement pneumatically assisted - Machine does not reference because 2 axes on the right side of the back gauge are not functioning; control module may be defective.

Condition: used, pressure 50 t chamfer lenght 1500 mm distance between columns 1220 mm Control Cybelec DNC 1200 closing speed 95 mm/min working feed 1-10 mm/sec work stroke 156 mm overrun time 59 ms Ndodpfx Aora Rrheb Aec tracking travel 6 mm throat 200 mm distance table - lower edge of ram 301 mm table width 160 mm table height 850 mm x-axis 550 mm travel R-axis +/- 50 Number of axles 3 (Y, X, R) St. weight ca. 3600 kg a lot of lower and upper tools incl. work light new control in 2003: Cybelec DNC 1200

Condition: good (used), Year of construction: 2019, operating hours: 5,800 h, functionality: fully functional, Timesavers 42 Series WRBW (Belt Sander / Rotary Brushes / Belt Sander) Ndodpfx Asz A Ucmjb Aec Year of manufacture: 2019 Only 5,800 operating hours! Includes an ATEX exhaust system from Ulmatec. Inspection is also possible.

Condition: excellent (used), Year of construction: 2013, operating hours: 11,000 h, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 435 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, nominal power (apparent): 54 kVA, torque: 117 Nm, controller manufacturer: Fanuc, controller model: i Series, workpiece height (max.): 200 mm, workpiece diameter (max.): 300 mm, total height: 300 mm, total length: 2,465 mm, total width: 2,835 mm, table width: 200 mm, table load: 60 kg, rotary table diameter: 200 mm, overall weight: 5,500 kg, spindle speed (min.): 120 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 11,000 h, coolant supply: 20 bar, spindle nose: DIN40, number of spindles: 1, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 125 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 2013 Doosan DNM 200/5AX 5 Axis CNC Machining Centre Used 2013 Doosan DNM 200/5AX (4+1) 5-axis CNC machining centre with Fanuc i Series control, probe, tool holders, spindle chiller, transformer, swarf conveyor and only 11,000 run time hours. Manufacturer: Doosan Model: DNM200/5AX Machine Type: 5 Axis (4+1) Machining Centre Year: 2013 Control: Fanuc Series i Control Hours: 11,000 Run Time Hours Machine Description 2013 Doosan DNM 200/5AX CNC Machining Centre, a compact, high-performance 4+1 - 5-axis vertical machining centre ideal for precision engineering, toolmaking, aerospace, medical, motorsport, mould and die, and complex component machining. This machine is fitted with a Fanuc i Series CNC control and has only 11,000 run time hours, making it an excellent opportunity for manufacturers looking for a reliable used 5-axis machining centre with strong capability, premium features and valuable accessories included. Ndjdpfx Abjy St Sde Ajc The Doosan DNM 200/5AX is well known for combining compact footprint, rigid construction and 5-axis positioning. It is ideal for reducing setups, machining complex parts and increasing productivity compared with conventional 3-axis machining. Key Features 2013 Doosan DNM 200/5AX 4+1 5 Axis CNC Machining Centre Fanuc i Series Control Only 11,000 Run Time Hours Includes Renishaw OMP60 probe Includes tool holders Includes spindle chiller Includes transformer Includes swarf conveyor Compact 5-axis machining solution Ideal for complex component machining Technical Specifications X Axis Travel: 400 mm Y Axis Travel: 435 mm Z Axis Travel: 500 mm A Axis Travel: 150 Deg (+30 to -120Deg) C Axis Travel: 360 Deg Table Diameter: 200 mm Max Load on Table: 60 kg Max Workpiece: 300mm Dia x 200mm High Spindle Speed: 12,000 rpm Spindle Taper: DIN40 Pullstud: Nikken PS-806 Tool Capacity: 30 Station ATC Rapid traverse (X, Y): 36000mm/min Rapid traverse (Z): 30000mm/min Rapid traverse: (A - tilt axis) 20 rpm Rapid traverse: (C – rotary axis) 30 rpm Maximum feedrate: (X, Y, Z) 15000mm/min Maximum feedrate: (A, C) 7200 deg/min Feedback system: Absolute encoder Max Tool Diameter: 125mm Max Tool Length: 300mm Max Tool Weight: 8kg Spindle motor AC: 11/18.5kW Axis motor (XYZ): AC 4.0kW Axis motor (A axis): AC 3.0kW Axis motor (C axis): AC 1.6kW Power Requirements: 54.0 kVA Air Pressure: 6kgf/cm2 Machine Dimensions: 2465 x 2835 x 3091mm Approx. Machine Weight: 5,500 kg Run Time Hours: Approx. 11,000 hours Included With This Machine Renishaw OMP60 Probe Tool holders Spindle chiller Transformer Swarf conveyor Fanuc i Series CNC control Why Buy This Doosan DNM 200/5AX? This machine is a strong choice for companies searching for a used 5 axis CNC machining centre, used Doosan machining centre, Doosan DNM 200/5AX for sale, or compact 5-axis vertical machining centre. The 4+1 machining capability allows users to machine multiple faces of a component in fewer setups, helping to reduce handling time and increase production efficiency. With a compact table, high spindle speed and Fanuc control, this machine is particularly suited to small to medium batch production and complex prismatic parts. Applications This Doosan DNM 200/5AX is suitable for: Aerospace components Medical components Motorsport parts Toolroom machining Mould and die work General subcontract machining Complex 4+1 machining Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, BROACHING MACHINE Ndsdpet Hr Dfjfx Ab Aoc

Year of construction: 1981, condition: used, Manufacturer: Deckel Type: FP 4 Table: Dimensions: 1000 x 470 mm Longitudinal movement (X-axis): 700 mm Transverse movement (Y-axis): 400 mm Vertical movement (Z-axis): 450 mm Spindle overhang: 50 - 450 mm Spindle mount: ISO 40 Number of spindle speeds: 18 Spindle speed range: 31.5 - 1600 rpm Number of horizontal spindle speeds: 18 Horizontal spindle speed range: 31.5 - 1600 rpm Machine weight: 2000 kg Nedpfx Absihp U Dj Aodc Feeds (X, Y, Z axes): 18, 10 - 500 mm/min Accessories: Milling head with quill Table: 1000 x 470 mm

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 104605-104645, input voltage: 400 V, total width: 1,500 mm, total length: 4,500 mm, total height: 2,820 mm, type of input current: three-phase, Fortuna Primus K4 – 4-row roll divider – rounder + depositor + GEK, year of manufacture 2011 Dough divider & rounder Condition: fully functional, directly from ongoing operation Application: round rolls, e.g., Kaiser rolls, braided rolls, salt rolls, wheat & mixed doughs • Weight range: approx. 40-110/120 g • Hourly output: approx. 4,800 pieces/hour • Rounding chamber height: approx. 10–35 • Rounding speed: scale 0–30 • Hopper volume: 20–25 kg • Dough yield: TA 160–165 • Connection power: approx. 1.5 kW • Machine weight: 650–700 kg • Depositor: for 60 × 80 cm trays (58–78) _____ Equipment • Fortuna Primus K head machine • 4 rows • GEK pre-fermentation cabinet matching the line • Rounding/stamping sets: Kaiser rolls, braided rolls, salt rolls • Complete depositor • Immediately ready for operation • In use until recently • Clean, well-maintained, regularly serviced Ndodpsy St U Sefx Ab Aoc • No known defects • Electronics modernized (new display) INSPECTION and TRIAL RUN possible (only) by appointment Freight possible, fully assembled with a jumbo truck (L/W/H = approx. 4,500 mm x 1,500 mm x 2,820 mm)

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : BT30 - Spindle power : 20 [kW] - Spindle speeds : 24000 [rpm] - Number of spindle hours : 4877 [h] LINEAR AXES - Travels on X/Y/Z axes : 700/420/380 [mm] - Rapid traverses rates (X/Y/Z) : 60 [m/min] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 25 - Tool exchange time : 0.9 [sec] TABLE - Table dimensions : 840/420 [mm] - Maximum weight upon table : 400 [kg] - Distance table / spindle nose (min./max.) : 200-580 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 16 [kW] Ndsdpoxcqadofx Ab Ajc WEIGHT & DIMENSIONS - Machine floor space : 1650/2950 [mm] - Machine height : 2550 [mm] - Machine weight : 3400 [kg] MACHINE HOURS - Number of hours under power : 14493 [h] - Number of working hours : 5307 [h] EQUIPMENT - CNC : Siemens 840D SL - Interface : Ethernet / RS232 / USB / PCMCIA - Rigid tapping - 3 colors status lamp - Coolant tank * with high-pressure pump : 15 [bars] - Coolant through spindle - Chips conveyor - Tool probe : Renishaw OTS - Workpiece probe : Renishaw OMP40-2 - Electric transformer