Used Heated for sale (15,342)

Condition: used, Year of construction: 2016, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 2212725, type of input current: three-phase, power: 1,999 kW (2,717.88 HP), input voltage: 400 V, control cabinet width: 800 mm, control cabinet length: 3,000 mm, control cabinet height: 2,400 mm, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, total height: 3,200 mm, total length: 16,000 mm, total width: 3,200 mm, fuel: domestic gas H, overall weight: 45,000 kg, type of cooling: water, nominal power: 1,999 kW (2,717.88 HP), nominal power (apparent): 2,000 kVA, input frequency: 50 Hz, input current: 250 A, Equipment: documentation/manual, The CHP unit is used in the horticultural operation to supply electricity. It can operate in parallel with the grid or in island mode. It is maintained by the manufacturer under a full-service contract. It is in good condition and fully functional. The container is spacious and very comfortable for service work. The generator is connected to the circuit breaker via a copper busbar system, ensuring high quality. The container temperature is controlled automatically via electric sunshades. The switch room is heated and air-conditioned. An EMI box is installed for continuous NOx measurement. A 15-meter chimney is located on the roof. A ladder for exhaust gas measurement is included. The unit is sold “as is” for pickup at the premises. The sale is due to a change to wind power generation. The service contract, valid up to 60,000 operating hours, can be taken over if desired and possible. It is a perfectly designed container, extremely spacious and solidly built! It is intended to remain in operation until December 1, 2026. If necessary, it can also be dismantled immediately. We would be happy to arrange a viewing and demonstrate its operation. Dkedpez D Ihfjfx Al Aju

Condition: used, Year of construction: 2006, functionality: fully functional, power: 37 kW (50.31 HP), filter area: 169 m², total height: 5,950 mm, total length: 4,650 mm, total width: 2,250 mm, For sale is a complete industrial Aagaard/Finnrose dust extraction and filtration system, manufactured in 2006, from a wood processing facility. The system is designed as a screw filter and includes a complete dust extraction control system with heat recovery. The main fan is an Aagaard AVD 40 HF/240 with 37 kW. The filter system has approximately 169 m² of filter area with a total of 128 filter elements, each approximately 2,000 mm long and Ø 210 mm. The discharge is carried out via a discharge screw and a rotary valve airlock. Below the discharge is a matching hopper with approximately 6 m³ volume on a mobile trolley, which is included in the scope of supply. The complete control cabinet for the dust extraction control and heat recovery is part of the system. The control cabinet includes, among other things, the controls for the rotary valve airlock, discharge screw, and four cleaning groups, as well as a Schneider-Electric frequency inverter for the dust extraction fan. Technical data: Aagaard / Finnrose industrial dust extraction system / screw filter Year of manufacture: 2006 Main fan: Aagaard AVD 40 HF/240 Motor power main fan: 37 kW Filter area: approx. 169 m² Filter elements: 128 pieces Dimensions filter elements: approx. Length 2,000 mm / Ø 210 mm Electrical system: 3 × 400/230 V, 50 Hz Rated current control cabinet: 160 A Discharge via discharge screw and rotary valve airlock 4 cleaning groups Complete control cabinet for dust extraction control and heat recovery Frequency inverter for main fan Heat recovery / return air system available 6-m³ hopper on mobile trolley included Existing steel substructure can be taken over Extensive existing piping can be included by agreement Dimensions: Filter tower incl. rotary valve airlock: approx. 5,950 × 2,280 × 4,632 mm (L × W × H), height from steel substructure. Steel substructure: approx. 5,500 × 2,800 × 2,250 mm (L × W × H from the ground). Total height of filter tower incl. substructure: approx. 6,882 mm. Availability / Dismantling: Sale possible immediately. The system is located at CH-3608 Thun, Switzerland. The complete dismantling and removal must be completed no later than July 31, 2027. Dismantling, loading, transport, and any customs clearance will be carried out entirely by the buyer at his own cost and responsibility. All necessary skilled personnel, lifting equipment, cranes, and transport means must be organized by the buyer. Dsdez Ik Atepfx Al Ajku Inspection possible by appointment. Sale from location in the existing condition. Technical specifications provided to the best of our knowledge, without guarantee; inspection by the buyer before purchase is recommended. Selling price: 29,500 EUR Price net, any statutory taxes and duties are additional. Export, customs clearance, and import duties are the responsibility of the buyer.

Condition: excellent (used), Nordson Hot Melt Heated Hoses 4 qty 8 ft long heated hoses Complete with air solenoids, modules, cord sets & dispensing guns Mounting brackets included Dksdjwuqfyjpfx Al Asu In excellent working condition

Year of construction: 2014, condition: like new (used), Heating tunnel for drying footwear. Dksdpfxsz Hw D Uo Al Aju

Year of construction: 2019, condition: used, functionality: fully functional, machine/vehicle number: A-6.3240, Complete 2019 Wienstroth Fixture Heat Treat/Quenching Line. Furnace Temperature Max 880 Deg C, 480kW, Heating Zones: 4, Power Supply Voltage: 460/60 Volts/Hz. Refer to attachments for further equipment specs & drawings. Line to include: High Temperature Furnace w/ Material Conveyers Overhead Crane & Hoist System Quenching Bath w/ Heat Exchanger, Pumps and PLC Washing/Rinsing Station, 2 Zone, TPS & Entrance Conveyer Assembly Transfer Conveyer System, Material Handling Assembly w/ Tracks Dedsz Hb S Aspfx Al Asku Low Temperature Temper Furnace w/ Cooling Conveyer & PLC Quenching Line PLC Controller Power Distribution Cabinets, Rittal/Wienstroth 24x Pallets Quenching Line Tooling

Year of construction: 2020, condition: used, Manufacturer: KAPP Model: KF3-1500-1 Year: 2020 Type: shell-and-tube heat exchanger / tubular heat exchanger Condition: new (declassified) – never put into production. Material: 316L stainless steel Heat transfer surface area: 2 m² Original working fluid: steam, Group 2 (tube) / 70 per cent glycol, Group 2 (shell) Operating pressure: -1/8 bar (tube) / -1/6 bar (shell) Operating temperature: 180 °C (tube) / 150 °C (shell) Test pressure: 17.6 bar (tube) / 16.3 bar (shell) Volume: 7 L (tube) / 10 L (shell) A bundle of around thirty tubes, flanged tube sheet Djdpfxoz Iubts Al Ajku Heat exchanger with expansion joint (bellows) Flanged connections on the heat exchanger side (inlet and outlet) 2 stainless steel mounting brackets Unladen weight: approximately 50 kg

Condition: good (used), functionality: fully functional, BDC 100T Hydraulic Moulding Press | Heated Platen Compression Press BDC 100T hydraulic moulding press for sale with heated platens. Approx. 100 tonne compression press for rubber, plastics, composites and laminating applications. Manufacturer: BDC Machine Type: 100T Moulding Press with Heated Platens Condition: Decommissioned. Good 100 Tonne Heated Platen Compression / Moulding Press This BDC 100T Hydraulic Moulding Press is a heavy-duty industrial press designed for heated platen moulding, compression moulding, forming, bonding and laminating applications. Dedpfx Ajzi Hchsl Aoku This machine is suitable for use in rubber moulding, plastics processing, composites, bonding, pressing, laminating and heated forming operations, making it a versatile addition to manufacturing, production and specialist fabrication workshops. Key Features 100 tonne hydraulic press capacity Heated upper and lower platens Heavy-duty industrial construction Suitable for compression moulding and heated platen pressing Ideal for rubber, plastics, composites and laminated materials Hydraulic pressing action for controlled force application Well-suited to production, R&D and workshop environments Machine Description The BDC 100T Hydraulic Moulding Press is designed for applications requiring high pressure and controlled heat. The heated platens allow materials to be formed, cured, bonded or compressed under consistent pressure, making the machine suitable for a wide range of industrial moulding and manufacturing processes. Hydraulic moulding presses of this type are commonly used for rubber moulding, plastic compression moulding, composite forming, gasket production, bonded components, laminating, hot pressing and specialist materials processing. Approximate Technical Specification General Manufacturer: BDC Machine Type: Hydraulic moulding / compression press Press Capacity: 100 tonnes Press Action: Hydraulic Construction: Heavy-duty industrial press frame Rams: 1 Guides: 4 Platen Type: Heated platens Platen Arrangement: Upper and lower heated work platens Working Applications Compression moulding Rubber moulding Plastic moulding Composite pressing Laminating Hot pressing Bonding applications Heated platen forming Production and workshop moulding work Heated Platen System Heating: Heated platen system Platen Size: 510 x 510mm Temperature Control: Fitted with platen temperature control Platen Use: Suitable for controlled heat and pressure applications Press System Power: Hydraulic press system Force: Approx. 100 tonnes Operation: Hydraulic pressing cycle Pump Size: 2.2kW Ram Diameter: 190mm Distance Between Guides: 540mm (Width) Max Daylight: 250mm Typical Configuration: Heavy-duty hydraulic moulding press with heated work platens Summary The BDC 100T Hydraulic Moulding Press is a 100 tonne heated platen compression press used for rubber moulding, plastic compression moulding, composite pressing, laminating, bonding and hot press applications. It features hydraulic pressing action and heated platens, making it suitable for industrial manufacturing, workshop production and specialist materials processing. Important Notice Note: Specifications and information provided in this listing are supplied in good faith; however, their accuracy cannot be guaranteed. Specifications are approximate.

Year of construction: 2017, condition: good (used), Spirax Sarco PHS Easiheat Heat exchanger system Dsdpfx Alez I Dv He Aoku 2017, Pre assembled skid mounted packaged heat exchanger system, touch screen control, with Alfa Laval heat exchanger, see plates for all spec

Condition: new, Year of construction: 2022, functionality: fully functional, type of input current: three-phase, power: 50 kW (67.98 HP), input voltage: 400 V, fuel: domestic gas H, overall weight: 2,200 kg, nominal power: 50 kW (67.98 HP), input frequency: 50 Hz, continuous power: 50 kW (67.98 HP), input current: 72 A, Equipment: documentation/manual, For sale: new and unused 2G g box 50plus combined heat and power (CHP) unit from 2022. Djdjz Hngmspfx Al Ajku This is a 2G Energietechnik g box 50plus, configuration as70 4, suitable for simultaneous generation of electricity and heat using natural gas. The unit has never been put into operation and is in new condition. At full load, the CHP unit delivers 50 kW of electrical power and approximately 104 kW of thermal power. The unit is designed for 400 V and 50 Hz and is equipped with a Liebherr G924 natural gas engine and a Leroy Somer LSAH 44.3 generator. Technical specifications: • Manufacturer: 2G Energietechnik GmbH • Type: g box 50plus • Configuration: as70 4 • ID number: H1214 • Year of manufacture: 2022 • Electrical power: 50 kW • Thermal power: approximately 104 kW • Rated voltage: 400 V • Rated frequency: 50 Hz • Rated current: 72 A • Weight of CHP module: approximately 2,200 kg • Fuel: natural gas • Electrical efficiency: approximately 34.5 percent • Thermal efficiency: approximately 71.8 percent • NOx emissions: less than 125 mg per Nm³ • Sound pressure level of CHP: approximately 55 dB(A) at 1 meter The offered package consists not only of the CHP module. The installation also includes two Viessmann boiler bodies, one Viessmann Proflame VM IV 3 gas burner, a separate control cabinet, and various flue gas components, fittings, and related documentation. The original new price of the complete installation was approximately €189,000. The installation comes from a project for which it was ultimately not used. The various main components are from 2022 and have been stored without being put into operation. Due to the size and composition of the installation, we advise interested parties to contact us in advance for further technical information, photos, documentation, and an overview of the components available. An inspection is, of course, possible (location: Winterswijk, Netherlands). Loading onto the buyer's transport vehicle is possible on site.

Condition: like new (used), Year of construction: 2019, Hot air generator with 2 outlets and 1 flue outlet, designed for use with wood waste, suitable for heating an area of 500 square meters. Dksdpfx Aljz D I Ilj Aeu

Condition: excellent (used), Used, electrically heated stainless steel tank / transport container Last use: Chemicals Item number: 10907 Volume: 1000 L Type: Upright, mounted on a stainless steel frame Material (in contact with medium): 1.4301 / AISI304 Design: With electric heating Bottom: Curved Top: Curved Operating pressure according to nameplate: 0.30 bar Tank dimensions: Overall width: 1200 mm Overall length: 1200 mm Overall height: 1675 mm Distance from outlet to bottom: 240 mm Materials: Inside: 1.4301 / AISI 304 Dkodpsz Ixgyefx Al Aju Frame: Stainless steel Features: Nameplate: Yes Outlet valve: Disc valve Outlet diameter: DN50 Electric heating Empty weight: 433 kg

Condition: used, Used, electrically heated stainless steel tank / transport container Last application: Chemicals Article number: 10908 Volume: 1000 L Type: Standing, in a stainless steel frame Material (in contact with media): 1.4301 / AISI304 Design: With electric heating Bottom: Arched Top: Arched Operating pressure according to nameplate: 0.30 bar Tank dimensions: Overall width: 1200 mm Dkodpsz Ixg Hjfx Al Asu Overall length: 1200 mm Overall height: 1675 mm Distance from outlet to bottom: 200 mm Manhole: 400 mm Materials: Inside: 1.4301 / AISI 304 Frame: Stainless steel Equipment: Nameplate: Yes Outlet type: Disc valve Outlet diameter: DN50 Electric heating Empty weight: 325 kg

Year of construction: 2024, condition: used, Manufacturer: Ziemex Processing Equipment Year: 2024 Model: Z-compact Serial number: 1403204 Dedjz Iubmjpfx Al Aeku Type: Welded plate heat exchanger Material: 1.4404 stainless steel (316L) Fluid: Oil (circuit B) / Water (circuit A) Circuit B volume: 59 L Circuit A volume: 6 L Permissible pressure: 0 to 6 bar Permissible temperature: 0 to +200 °C (circuit B) / 0 to +110 °C (circuit A) Test pressure: 9.5 bar (circuit B) / 8.7 bar (circuit A) Fluid group L1G GR2 Heat exchange surface area: 4.2 m² Unladen weight: 142 kg The Z-compact® welded plate heat exchanger combines the thermal efficiency of a plate heat exchanger with the mechanical robustness of a shell-and-tube heat exchanger. L'échangeur de chaleur à plaques soudées Z-compact® allie le rendement thermique d'un échangeur de chaleur à plaques à la robustesse mécanique d'un échangeur de chaleur à calandre et tubes. Under equivalent operating conditions, the Z-compact® offers better heat transfer than a conventional tube-and-shell heat exchanger. Its heat transfer surface is more efficient and its pressure drops are lower.

Condition: used, 26,2m3 heated tank with a connical bottom. Dodpfeun Nvbjx Al Aeku Diameter: 3.50m Total height: 3.70m The tanks have been used to store wine.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 31.064-R-11/2022, overall weight: 1,200 kg, heating capacity: 49 kW (66.62 HP), total height: 2,090 mm, total length: 2,270 mm, total width: 780 mm, Equipment: documentation/manual, Offering a used Optimal E Gr.II-S hot air furnace. Sale due to workshop restructuring. Heating capacity, special version: 49 kW. Cleaning side on the right – with automatic control. - Complies with 1st Federal Immission Control Ordinance (BlmSchV) – Stage 2!!! - Suitable for rooms according to DIN, up to 700-1250 cubic meters. - According to the Federal Immission Control Ordinance (BlmSchV), approved for particleboard or coated wood-based materials (only in woodworking or wood processing companies). Fine sawdust or dust of any kind is not suitable – risk of deflagration!!! - Furnace consumption: approx. 15 - 25 kg/h. Dkedezy R Rdepfx Al Aju - Tested in accordance with DIN EN 13240: 2005-10 (continuous operation), DIN EN 13229:2005-10, DIN EN 303-5:2012-10. Sale does not include the stainless steel chimney.

Condition: used, Year of construction: 1994, nominal heat output: 600 kW (815.77 HP), temperature: 95 °C, Equipment: hot water, For sale: Mawera Type FU600RA wood-fired boiler, manufactured in 1994. Accessories included: all fans, flue gas cyclone, exhaust pipes, control system, and feed motor with a short screw conveyor. The fireclay lining has been renovated by a specialist company. The boiler has been dismantled and is available immediately. Dedoz Eg Srepfx Al Ajku The boiler can be operated with wood chips and pellets.

Condition: good (used), Weiss climate testing chamber with seat pulsator Manufacturer: Weiss Type: SD 1400/+20 DU Test chamber: Material: Stainless steel Dimensions: Height approx. 800 mm Width approx. 2000 mm Depth approx. 900 mm Volume: 1440 liters Outer housing Material: Double-coated Zincor sheet Dimensions: Height approx. 2000 mm Width approx. 2200 mm Depth approx. 2000 mm H x W x D 2000 x 2200 x 2000 mm Paint finish: Light grey (RAL 9002) Door, double-leaf: Hinged on the left and right Equipment: Pass-through in the floor and ceiling: 2 each, DN 100 mm, for inserting the pulsation tables Pass-through in the side walls: 1 each, left, right, 100 mm Refrigeration unit: Air-cooled Control: Digital measurement and control system DMR Basic control panel: Integrated into the main switch panel Interface: RS 232 C, for connection to a PC Software: Operating software for MS-Windows Performance data: Temperature range without climate control: +20...+100 °C Temperature stability without climate control: +0.2 … +0.5 K (time-dependent) depending on the range, in the steady state Temperature range with climate control: 20...+95 °C Temperature stability with climate control: +0.2 … +0.5 K (time-dependent) depending on the range, in the steady state Dew point range: 20...+94 °C Humidity range: 10...98 % RH Humidity stability: +3 ... +5 % RH, depending on the range, in the steady state Temperature change rate measured in the outlet without a test specimen and without a load - Cooling: 0.5 K/min. on average, between +100 and +20 °C - Heating: 0.5 K/min. on average, between +20 and +100 °C The performance data refer to an ambient temperature of max. +25 °C and the specified rated voltage For trouble-free operation of the system, the ambient temperature must be between +10 and +35 °C Connections / Other Protection class: IP 32 for the control cabinet Sound pressure level during free-field measurement at a distance of 1 m in front of the device: 60 dB (A) Humidification water: fully demineralized, conductivity max. 20 μS/cm, pH value 6 - 7, automatic topping up Condensate drain: back-pressure-free, 3/4" hose connection Power connection: 400 V; 3 PH+N PE; 50 Hz Connected load: max. 10 KVA Weight: approx. 1160 kg Seat testing device with steel structure for mounting and securing to the climate testing chamber, including: • 2 pneumatic weight lifting devices (150 mm stroke) for test specimen change, 12 weights each weighing 5 kg • 1 base frame in normal steel welded construction for attachment to the underside of the climate testing chamber. This frame is provided on all sides with removable sheets and has 2 folding doors for adjusting the eccentricity. These doors have safety switches. Dodpoxbgrgefx Al Ajku • 2 eccentric disks with bearings and tachometer, 2 connecting rods, 2 ball guides • 2 mounting tables, perforated, 20 mm grid, 650 x 650 mm, for connecting the test specimens, made of aluminum, thickness min. 10 mm • 2 mounting plates, perforated, 20 mm grid, 200 x 200 mm, for connecting the buttocks replica • 2 load rods, 600 mm long, made of stainless steel (The connection to the test specimen is not included in our price, but can be offered subsequently after a precise definition) • 2 three-phase motors, 2 belt drives with tensioning devices • 1 pneumatic control system with 2 manual valves, one filter-regulator unit and one shut-off valve, 1 electrical control cabinet with 2 SEW frequency inverters, hand switch, emergency stop button, 2 push buttons,

Condition: excellent (used), For sale is an industrial gas burner, Weishaupt WM-G10/3-A monarch®, in ZM design, complete with DUNGS gas fittings and accessories as shown in the pictures. With a thermal output of 100–1000 kW, this burner is suitable for installations requiring high performance, such as industrial boiler rooms, heating and process boilers, after selecting the burner according to the equipment's parameters. A key advantage of this offer is the extensive range of included equipment: in addition to the burner, you also receive a double gas valve DUNGS DN65, a pressure regulator, flange components, and a Weishaupt control panel. The entire set is sold in the configuration shown in the photographs. Burner data from the nameplate: Manufacturer: Max Weishaupt GmbH Series: monarch® Model: WM-G10/3-A Dsdpfxjz I Enqj Al Aeku Design: ZM Year of manufacture: 2010 Serial number: 5970155 Type of gas indicated on the nameplate: N Thermal output range: 100–1000 kW Gas connection pressure range: 15–500 mbar NOx class: 2 Main power supply: 400 V, 3~, N, PE, 50 Hz Control voltage: 230 V, 1~, 50 Hz Electrical power: 1.86 kW Protection class: IP54 Country of manufacture: Germany CE marking: CE-0085BQ0027 Fittings and equipment shown in the pictures: Double gas valve DUNGS DMV 5065/12 Nominal valve diameter: DN65 Maximum valve pressure: 500 mbar Valve catalog number: 245099 Valve marking: class A, group 2, EN161 Gas pressure regulator Presostat DUNGS GW 50 A2 Weishaupt / Berger Lahr STE 50 actuator, 24 V DC power supply Weishaupt control panel with display Manometer Tubular elements, flanges, connectors, and wiring shown in the pictures Condition and scope of sale: The unit has visible signs of use, dirt, and localized corrosion on the steel components. The pictures show the actual item offered and serve as the basis for determining the scope of delivery. This offer includes the burner together with the shown accessories. Selection for a specific boiler, installation, and adjustment should be entrusted to a gas burner service company.

Condition: used, functionality: fully functional, power: 35.3 kW (47.99 HP), Highly efficient 4-pipe heat pump with R290 (propane) This state-of-the-art 4-pipe heat pump has been specifically developed for the flexible, simultaneous or independent provision of chilled and hot water. Thanks to cutting-edge inverter technology and the environmentally friendly refrigerant R290, the unit offers maximum energy efficiency with a minimal environmental footprint. The device features robust enclosure panels and integrated sound insulation in the compressor compartment to ensure extremely quiet operation. Equipped with a factory-integrated hydraulic kit (1 pump) and a 100-liter buffer tank, the unit is ready for immediate operation and can be seamlessly integrated into complex building systems. Key technical data at a glance: • Cooling capacity: 14.1 – 35.3 kW (modulating) • Heating capacity: 19.2 – 39.5 kW (modulating) • Refrigerant: R290 (propane – future-proof and GWP-compliant) • Compressor configuration: 1 highly efficient, semi-hermetic reciprocating compressor / 1 refrigeration circuit • System type: 4-pipe unit Intelligent operating modes for maximum energy savings • Flexible 4-pipe logic system: Complete hydraulic separation of air conditioning and domestic hot water (DHW). The control system regulates the pumps fully automatically as needed and allows for exclusive DHW activation via a digital input. • Highly efficient combined cycle (simultaneous operation): • In cooling mode: When DHW is required, the system utilizes complete heat recovery. It provides free hot water while the fan stops. • In heating mode: The system prioritizes DHW production and automatically switches back to room heating once the setpoint is reached. Dkjdpfx Asz Ix D Ssl Asu • On-demand individual operation: Efficient single-mode operation for cooling, heating, or hot water only, with precise inverter control to avoid partial load losses.

Condition: used, Year of construction: 2007, functionality: fully functional, power: 100 kW (135.96 HP), heating capacity: 100 kW (135.96 HP), nominal heat output: 100 kW (135.96 HP), nominal power: 100 kW (135.96 HP), tank capacity: 5,000 l, We are offering this used HDG Bavaria 100kW heating system with articulated arm discharge, manufactured in 2007. Dsdpjyrhd Tsfx Al Aoku Manufacturer: HDG Bavaria Model: 100kW with articulated arm discharge Year of manufacture: 2007 If you have any questions or require further information, please feel free to send us a message or give us a call. The system is currently still in operation and can be inspected. The offer includes a 5,000L buffer tank, control unit, and various spare parts (which we have kept in stock as a precaution).

Year of construction: 2017, condition: excellent (used), REF: MM6476 1 x 2017 Packaging Automation Ltd Eclipse SL4 inline heat-sealing machine supplied with 1 x Packaging Automatic Ltd Eclipse C1 automated chain-and-peg conveyor system, 2 x interchangeable sets of tooling and some spare parts. Previously used to heat seal punnets of cauliflower and cauliflower/broccoli mix from multi-head weigher. Both machines on height adjustable feet. The Eclipse SL4 is a fully automatic inline tray-sealing machine designed for high-throughput food packaging applications. Suitable for sealing a wide range of pre-formed trays, the machine is ideal for use within the meat, poultry, seafood, ready meal, fresh produce, bakery, and convenience food sectors. The automated conveyor system provides continuous product handling, helping to improve production efficiency and throughput. Dedpfx Alszrg T Ej Ajku Specification: Model of inline heat sealer - Eclipse SL4. Serial number - EC34-MC-00100. Model of indexing inline conveyor – Eclipse C1. Date of manufacture - 2017. Tooling - 2 x sets. Set 1: 4 x 1 format with arms. For punnets (double section) measuring 261mm L x 166mm W x 55mm D. Set 2: 4 x 1 format with arms (single punnet - in machine) measuring 177mm L x 140mm W x 55mm D. Eclipse C1 infeed conveyor belt (modular plastic belt section) - 300mm wide. Outfeed conveyor belt - 290mm wide, blue rubber. System footprint: Eclipse C1 indexing conveyor footprint - 3870mm L x 950mm W x 1050mm H. Eclipse SL4 inline sealer footprint - 3230mm L x 1050mm W x 2050mm H. Condition – Very good. This system was purchased new and run for approximately 6 months per year. Supplied with various spare parts, including cutters for both sets of punnets, spare belts, heater pads, etc. *Please note* - None of the following equipment pictured is included in the sale: multi-head chutes with sensors feeding the C1 infeed conveyor AND thermal transfer coder mounted on Eclipse SL4 inline sealer.

Condition: excellent (used), For sale: an industrial gas burner, Weishaupt WM-G10/3-A monarch®, ZM version, from 2011, complete with DUNGS gas valves and accessories as shown in the photos. The burner’s thermal power range is 100–1000 kW, and its German manufacture and extensive valve set are the key advantages of this offer. This burner is suitable for industrial boiler rooms, as well as heating and process installations – after being adapted to the boiler and gas installation parameters. The offer includes not only the burner but also a double gas valve, a pressure regulator, a gas filter, pressure switches, and connecting elements. The exact scope of the sale is visible in the photographs. Burner technical data – according to the nameplate: Manufacturer: Max Weishaupt GmbH Series: monarch® Model: WM-G10/3-A Version: ZM Year of manufacture: 2011 Factory number: 40018116 Gas type – designation on the nameplate: N Thermal power: 100–1000 kW Gas connection pressure: 15–500 mbar NOx class: 2 Main power supply: 400 V, 3~, N, PE, 50 Hz Control voltage: 230 V, 1~, 50 Hz Electrical power: 1.86 kW Protection class: IP54 Designation: CE-0085BQ0027 Country of manufacture: Germany Gas valves and accessories: DUNGS DMV 525/12 double gas valve Maximum pressure: 500 mbar Class: A, group 2 Standard indicated on the nameplate: EN 161 DUNGS catalog number: 255248 DUNGS FRS 520 gas pressure regulator Maximum inlet pressure: 500 mbar Output pressure range indicated on the label: 5–20 mbar DUNGS catalog number: 223382 Weishaupt article number: 640679 Weishaupt 520/1 gas filter Connection: 2″ Dkedpfx Asz I Ep Iol Aju Maximum working pressure: 0.5 bar Designation: CE-0085AS0538 Other equipment visible in the photos: DUNGS GW 50 A5/1 gas pressure switches Pressure switch mounted on the burner Pressure gauge Control actuator Burner head assembly with electrodes and cables Pipe elements, elbows, flanges, and fittings Wiring and connecting plugs Condition and scope of delivery: Used burner, with visible signs of use and storage. The elements have some dirt and localized corrosion marks. The photos show the actual item being offered.

Condition: used, functionality: fully functional, Due to an upgrade, we have a control unit for a MAWERA heating system available. Dodpoz Iky Eefx Al Ajku The touch panel was replaced 2 years ago. The control unit is in perfect working order. Price: 400 EUR * 19% VAT

Condition: refurbished (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,100 °C, overall weight: 1,700 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Electric car-bottom furnace for heat treatments on steels (normalizing, annealing, tempering, preheating, etc.) by Pagnotta Termomeccanica srl, Deruta, Italy. Maximum temperature: 1,100°C Dksdpfxszxxkvj Al Aju Usable loading dimensions: 1,250x800xh1,000 mm Capacity: 1,000 liters CE Declaration of Conformity Used and refurbished machine with new electric heating elements The listed specifications are for informational purposes only; the photos depict similar machines. The furnace can be customized according to your specific heat treatment process.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Walk-in temperature chamber for testing, trials, or production processes Temperature range: +40°C to +80°C with a control accuracy of +/- 1°C Air conditioning via recirculation air handling unit (approx. 3000 m³/h) and electric heating, approx. 6 kW External dimensions: 4800 x 3200 x 2430 (depth, width, height in mm) Internal dimensions: 4560 x 2960 x 2160 (depth, width, height in mm) Chamber area: approx. 13.5 m² Chamber volume: approx. 29.2 m³ Dksdpezpy Idsfx Al Aeu Equipment: - Door with a width of 1200 mm and a height of 2000 mm, with a pre-installed ramp for convenient loading - Viewing window in the door - Floor elements made of 1.5 mm non-slip stainless steel tread plate, glued onto a 15 mm thick, water-resistant laminated pressure distribution plate. Slip resistance class R11. Permissible wheel load: 2500 N - High-quality insulation with 120 mm polyurethane high-temperature foam, U-value according to DIN EN 13165: 0.17 W/m²*K - Temperature-resistant LED ceiling lighting - Temperature-resistant cable duct on the right and left sides with a total of 6 230V sockets - Siemens S7-1200 control system and 7" color touch panel - Integrated PID control for temperature - Recording and graphical display of the temperature profile - Plain text display of fault messages and history tracking, as well as password protection - Potential-free switching contacts for alarm forwarding Electrical connection: AC400V / 3Ph/N/PE / 50 Hz The system can be inspected by arrangement. The buyer must dismantle and remove the system. As the operating location has been closed, no assistance with logistics can be provided.