Used Maintenance Furnace for sale (7,794)

Condition: new, Year of construction: 2025, An active lime production line is a set of equipment designed to produce high-quality lime from limestone, with the aim of meeting various industrial applications, such as in the production of steel, environmental desulfurization, and other processes. The process typically involves several stages, including limestone crushing, calcination, hydration, and finally, the production of active lime. Here is a general overview of the main steps involved in an active lime production line: 1. Limestone Quarrying: - Raw limestone is extracted from quarries and transported to the lime plant. The limestone may undergo crushing and sizing processes to achieve the desired particle size. 2. Limestone Preheating: - The raw limestone is typically preheated in a preheater or precalciner before entering the rotary kiln. This preheating step helps to reduce the energy consumption in the kiln by partially decarbonizing the limestone. 3. Loading into the Rotary Kiln: - The preheated limestone is loaded into the rotary kiln, a large, rotating cylindrical furnace. The kiln is inclined at a slight angle to facilitate the movement of materials through the kiln. 4. Calcination: - In the rotary kiln, the limestone undergoes high-temperature calcination (typically in the range of 900 to 1,450 degrees Celsius). This process causes the limestone to undergo chemical and physical changes, converting it into lime (calcium oxide). 5. Cooling: - After calcination, the lime moves through the cooling zone of the kiln, where it is cooled down. This cooling step is essential to stabilize the lime and prepare it for further processing. 6. Hydration: - The quicklime produced in the kiln is then slaked with water in a hydration process to produce slaked lime (calcium hydroxide). This is typically done in a separate hydrator. 7. Separation of Unreacted Lime: - The slaked lime is separated from any unreacted quicklime or impurities. This step ensures that the final product is of high quality. 8. Filtering and Drying: - The separated slaked lime is filtered to remove excess water, and the resulting product is dried to achieve the desired moisture content. 9. Storage and Packaging: - The final product, active lime (calcium oxide), is stored in silos or other storage facilities. It can then be packaged for sale or transported to end-users. 10. Environmental Considerations: Pjdoq Nyzbjpfx Adnsrd - Dust collection systems and other environmental control measures are often implemented to minimize emissions and ensure compliance with environmental regulations. The design and configuration of an active lime production line can vary based on factors such as the type of limestone used, production capacity requirements, and specific industrial applications. Modern production lines often incorporate advanced technologies to optimize energy efficiency, minimize environmental impact, and ensure high-quality active lime production.

Condition: like new (used), Year of construction: 2025, operating hours: 100 h, functionality: fully functional, As new! Used for only 15 production days. Hot Air Furnace — Capacity: 2,000,000 kca This unit is in excellent condition, practically as new, with only 15 days of operation. Ideal for industrial heating or drying applications. For more details or photos, please contact us. Pedsxq Rv Iepfx Adnjrd

Condition: like new (used), Chanber size: 280x180x500mm upper Predpfx Adjd Sm Dijnod 280x130x450mm lower Max temperature: 700 C °

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, total width: 2,350 mm, total length: 6,000 mm, inner dimension length: 3,000 mm, inner dimension width: 1,600 mm, TECHNICAL DETAILS Oven dimensions: 3,000 x 1,600 mm MACHINE DETAILS External dimensions (L x W): 6,000 x 2,350 mm Firing: Gas Pjdpfoxur Ndox Adnjrd Orientation: Vertical, for use with vacuum bags; connection to vacuum port inside oven EQUIPMENT 2 x trolleys included The following data is from a general offer; the seller accepts no liability for its accuracy. This also applies to the data sheet in the appendix. Electrical Voltage: 400 V Current: 16 A Frequency: 50 Hz Gas Type: Natural gas / Propane / LPG Connection: 1"1/4 Gas pressure: 20–60 mbar Propane/LPG consumption (4 burners): 8 kg Propane/LPG consumption (8 burners): 16 kg Natural gas consumption (4 burners): 9.6 m³ Natural gas consumption (8 burners): 19.2 m³ Temperature range (4 burners): 40–150 °C Temperature range (8 burners): 40–320 °C Power output (4 burners): 96 kW Power output (8 burners): 192 kW

Condition: used, Year of construction: 1998, functionality: fully functional, Type: Annealing Furnace 75 kW Manufacturer: NABERTHERM Model: W2200/65A Year of Manufacture: 1998 Serial Number: 146150 Condition: Used Quantity: 1 Pedpfx Adsxz A T Hsnsrd

Condition: used, Year of construction: 2011, RCN LAMMY SMART XL – Year 2011 Laminating furnace Internal dimensions: 1800 x 3000 mm Power: 25 kW Prjdpfjxzp Ikex Adnjd

Year of construction: 2010, condition: excellent (used), controller manufacturer: SIEMENS, controller model: S7-1500, temperature: 250 °C, year of last overhaul: 2021, CONTROLS .. electronic controls SIEMENS S7-1500 CHARACTERISTICS HEAT TREATMENT EQUIPMENT .. temperature max.: 250 °C HEAT TREATMENT COMPARTMENT / ZONE .. heat treatment process: tempering .. heat treatment medium: water .. temperature max.: 250 °C .. length: 8000 mm .. width: 4300 mm .. diameter: 4300 mm Prodpfx Adsxyvy Renod DIMENSIONS / WEIGHTS .. space requirements -left/right-: 15000 mm .. space requirements -front/back-: 6300 mm .. total height: 6600 mm .. height above floor level: 5500 mm .. height under floor level: 1100 mm .. total weight approx.: 60000 kg ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz Electrically upgraded in 2021 (Siemens). - Has an aviation and aerospace certification. - Complete documentation of all calibrations - Monitoring system for temperature and pressure zones Operating temperature: 250 °C Operating pressure: 12.5 bar Operating hours: - Vacuum pump: 9,132 h - Fan: 15,497 h

Year of construction: 1988, condition: as good as new (ex-display), machine/vehicle number: 1116/87, MANUFACTURER: ELTERMA/IPSEN Prsdpsm E Tvhsfx Adnsd MODEL: VDFC-413 DESCRIPTION: Vacuum tempering furnace YEAR OF PRODUCTION: 1988 STATUS: New unused, need revamping of the obsolete parts ( Cabinets ) Max Load Dimensions: 610x900x500mm Max Load Weight: 500 kg Working temperature: 150-750⁰C Approximate warm-up time of the vacuum chamber at 550 ° C for 30 minutes

Condition: new, Year of construction: 2025, Powder coating oven The oven is designed for drying elements painted with water-based and solvent-based varnishes. Working dimensions (mm): 1500 (w) x 4000 (d) x 2000 (h) Technical data: • Power consumption: 59 kW. Equipment: • Top transport, • Touch control panel, Pedpfjg Ib Epsx Adnsrd • Hot air circulation (Equal temperature throughout the furnace, acceleration of the workpiece heating process), • Locks for safe opening and closing, • Time module, • Thermoregulator (controls the temperature inside and maintains it at an appropriate level), • The oven is equipped with rails for easy transport. • Maximum working temperature: 230°C. CHOOSE BUMEX SP. Z O.O. Very high quality of the machines offered on the market. Professional advice and service. Guarantee. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our clients. All products of the brand BUMEX SP. Z O.O. have WE certificate. We offer our own transport - prices are agreed each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 2001, Vacuum tempering furnace Manufacturer: BMI year of construction 2001 Maximum temperature: 750°C Year of construction: 2001 Batch size: L X W X 1200 X 600 X 600mm Heating: Electric Heating capacity 100 KW Prodpfxevcyf Ts Adnod

Year of construction: 2009, condition: excellent (used), functionality: fully functional, Equipment: CE marking, type plate available, Induction furnace for heating steel with dimensions up to 550mm in length, 100mm in width, and 20mm in thickness. The furnace is connected to a feeder for small bars with dimensions from 10x10 to 22x22 mm and lengths up to 300 mm. The loading feeder sorts the workpieces and automatically loads the inductor with each item for heating. The throughput is very high. For small components, heated parts at up to 1100 degrees are available every 6 seconds. Two inductors are included for heating materials of up to 20mm and 16mm in thickness. The furnace can be adapted to suit your specific requirements. The cost of replacing the inductor with models for different sizes is around 3,000 EUR. The machine is highly versatile regarding the size of products to be heated. Prjdpfx Aew Hqldednsd Capable of heating flat bars, round bars, or square bars. The complete machine consists of a generator, induction furnace with inductor, bar feeder, and chiller.

Year of construction: 2017, condition: excellent (used), functionality: fully functional, Chamber furnace with exhaust hood, very good condition. 12 months warranty - Max temperature: 1300 °C - Internal dimensions (W x D x H): 400 x 400 x 400 mm - Capacity: 60 liters - Separate main switch - 5-sided heating - Air supply and exhaust with dampers, electrically operated via Belimo actuators - Supply air fan controlled by frequency converter via controller - Stainless steel exhaust hood - Bentrup 507 control system, thyristor control - Controller language: German only, cannot be switched to other languages - Additional drag element type S for external recording - Documentation included - Net weight: 250 kg - Power consumption: 18 kW - Current draw: 26 Amps - Connection voltage: 3/N/PE 400VAC - Connection type: prepared for fixed installation, 32 A plug Furnace has been overhauled, all switching electrical components are new. Supplied with warranty. We have several units of this furnace type in stock. Viewing by appointment. Podpfx Aoxp Rn Uodnerd Furnace, furnaces, annealing furnace, industrial furnace, chamber furnace, kiln, enamelling furnace, tempering furnace, laboratory furnace, hardening furnace.

Year of construction: 1966, condition: used, machine/vehicle number: 6498, Article number: MA1020 Manufacturer: Naber Art: 45 S Year: 1966 Machines-Nr.: 6498 Taxes: Naberterm Length [mm]: 1000 Width [mm]: 750 Height [mm]: 700 Weight (kg]: CA. 120) Prjdedd Rw Espfx Adnjd Rated power: 380V / 6 KW Table size LxW: Internal dimensions: 230 X 230 X depth 300 mm

Condition: like new (used), functionality: fully functional, first registration: 02/2025, Year of construction: 2024, operating hours: 76 h, Demonstration unit Egholm Park Ranger 2155, first registration 17/02/2025, air-suspension seat, cup holder, armrests, LED work lights, reversing camera, DAB radio, heated mirrors, liquid wax sealant, equipped with salt spreader and front sweeper for winter service; optionally available with vacuum sweeper. Only 76 operating hours, available immediately, with warranty. Purchase price €48,000.00 plus VAT. Podexyr A Iopfx Adnjrd

Condition: excellent (used), Annealing furnace Make Naber Type 41 S Prsdpjrwfqnefx Adned 12 kw YEAR OF MANUFACTURE 1972 Dimensions of the annealing chamber : width 350 mm height 220 mm depth 500 mm Transport dimensions : Length 1350 mm Width 850 mm Height 1560 mm with pallet Weight 320 kg

Condition: used, Nabertherm Nabertherm N 2260/S Chamber Furnace with Wire Heating up to 1300 °C Technical Specifications – Nabertherm N 2260/S Feature / Value Prjdpfxjw Ec Egj Adnjd Model: Nabertherm N 2260/S Maximum Temperature: 1300 °C Voltage / Connection: 400 V, 3~ (three-phase current), PE (protective earth) Heating Power: 75 kW Heating Zones: 5-sided (sides, floor, door, optionally ceiling) Internal Dimensions (Firing Chamber) Dimension / Value Width: 1,500 mm Depth: 1,000 mm Height: 1,720 mm Volume: approx. 2,580 liters External Dimensions (Complete Unit) Dimension / Value Length: 2,000 mm Width: 2,250 mm Height: 2,850 mm Weight: approx. 3,100 kg Condition: used Scope of delivery: (see photo) (Subject to change and errors in technical data and information!) For further questions, we are happy to assist you by phone.

Year of construction: 1999, condition: good (used), Chamber hardening furnace K 1150-2 Rated temperature: 1150 °C, 5.0 kW 400 Volt Podpfx Adoxwqhkjnsrd Usable space: 225 mm width, 215 mm height, 300 mm depth External dimensions: 525 x 595 x 650 mm Heating-up time: 2.5 h 75 kg With base frame

Condition: good (used), Hello, For sale: Chamber hardening furnace POK 73.1. The machine is fully operational and in continuous use, with the possibility of inspection and testing. Prjdpfx Adexykcaoned The listed price is net and VAT must be added. The machine can be viewed in Starachowice, at 13 Kwiatkowskiego Street. Phone contact available from 7:00 to 16:00.

Year of construction: 1992, condition: used, max. temperature 1100 Grad size of opening ca. 250 x 120 mm depth of chamber ca. 290 / 310 mm heating capacity 2,7 kW control "Thermocomputer TC 5040" Podpfx Aow Rrf Ssdnord

Condition: used, Manufacturer: DEMAK Housing size: 6600 x 2100 mm Pjdsvgy Ivspfx Adnsrd Maximum temperature: 200 °C In the past, the oven was part of a plant and the product was transported via a conveyor belt, The oven was previously controlled by PLC, it was dismantled,

Condition: good (used), Filter control valve, switching valve, maintenance unit, water separator, filter bowl, pneumatic filter, filter regulator, maintenance unit combination, filter control valve -Manufacturer: Festo, filter regulator with pressure gauge Predpfxjxv S N To Adnsd -Type:LFR-1/4-D-MINI 159631 -Pressure: max. 16 bar -Quantity: 1x filter control valve available -Dimensions: 210/120/75 mm -Weight: 0.6 kg

Condition: excellent (used), Here we offer a Despatch lab oven. Despatch Laboratory Ovens + 8 "WAFER LCC: Maximum temperature 260 ° C Lockable circuit breakers turn on the control panel for easy maintenance Protocol 3 control with large LCD display, built-in data logging capabilities and USB port for easy oven setup and data export Edelstellenne room with interior seams welded continuously on the insulation side to protect the working space from pollution Programmable door locking prevents the operator from opening the oven door while the cycle is running The door lock switch turns off the heating when the door is open The rolled air flow consists of 100% HEPA (High Efficiency Particulate Air) and is filtered to ISO Class 5 (Class 100) throughout the process cycle The Magnehelic Manometer monitors the pressure drop of the HEPA filter so you know when to replace the filter Electric door unlocking for ergonomic operation UL & C-UL Listed Control Panel Open Modbus communication connection (RS485) for remote monitoring and recording Chamber measure L 350 mm Chamber measure B 350 mm Chamber Measure H 350 mm Maximum temperature 260°C Digital screen Yes Electric connection 230 V Total size L 830 mm Pjdpfx Aod Nfq Iednjrd Total dimensions B 910 mm Total Measure H 560 mm Type: LCC1-16NV-3 Condition: used/used Delivery: (See picture) (Changes and errors in technical D

Year of construction: 2001, condition: used, machine/vehicle number: 12117, Continuous Furnace / Brazing Furnace Max. operating temperature: 1120°C Normal operating temperature: 1050°C Pjdpfx Aewku N Ujdnerd Conveyor Belt: Useful width of conveyor belt: 250mm Useful height of conveyor belt: 150mm Heating Chamber: Heating Chamber Length: 1530mm Heating Chamber Width: 500mm Height: 500mm Installed Power, Gas: 33kW Number of Heating Zones: 3 Number of Control Zones: 3 Voltage: 3 x 400/230V Frequency: 50Hz You are welcome to visit us by appointment.

Condition: good (used), Internal dimensions: 600 x 600 x 600 mm Predpfx Ajh Eilvednsd Max. Temperature 70°C

Condition: excellent (used), Filter control valve, switching valve, maintenance unit, water separator, filter bowl, pneumatic filter, filter regulator, maintenance unit combination, filter control valve -Manufacturer: Festo, Maintenance unit filter control valve -Switching valves: MS6-EM1-1/2-S M56-EE-1/2-V24-S -Filter control valve: M56-LFR-1/2-D7-CRV-AS -Branch modules: M56-FRM-1/2-AD7 -Pressure build-up valve: M56-DL-1/2 -Individual components: see photos -Price/Fee: complete Podpfoxvxw Rex Adnjrd -Overall dimensions: 470/300/H110 mm -Weight: 4.5 kg