Used Himoinsa Hiw 100 for sale (23,794)

Condition: new, Year of construction: 2021, Hiwell batter mixer II Hiwell DJJ100-II batter mixer utilizes ingenious mixer to evenly combine water and batter. This stainless steel mixer is applicable for high viscosity batters such as Tempura batter. Kedpog Unrpefx Ah Njdg Advantages 1. Our parry battering machine involves utilization of cutting-edge control system, thus realizing repeatable operation cycles of high-speed mixing, low speed mixing and alarm on application of batter. Therefore, batter is prevented from sedimentation. 2. Mixing tank in this fruit battering equipment is endowed with separation layer, which is aimed to keep batter temperature between 10-20℃ by ice or cold medium. 3. Our batter mixing equipment comes with batter output pump, which offers excellent connectivity to battering equipment to form batter feeder. 4. Thanks to reliable protection system and Siemens electronic components, thisfruit processing equipment is operator and maintenance friendly. 5. The entire batter mixer is manufactured with quality stainless steel to meet HACCP standards. 6. Optional battering dosing device is available for more accurate viscosity control.

Condition: excellent (used), hole punhing press: pressure 100 t output 40 in 22 mm L-beam 160 x 16.0 mm square edge steel 50.0 mm round bar steel 50.0 mm flat steel 600 x 15.0 / 400 x 20.0 mm throat 610 mm engine output 8.5 kW weight of the machine ca. 3150 kg range L-W-H ca. 2200 x 1400 x 1830 mm Equipment: - Robust electro-hydraulic profile steel shear - Punching station with punch quick-change device and die holder - Includes large support table with movable stop - Continuous stroke adjustment with jog/setup mode - Triangular notching station with support table - Bar, profile, and angle steel shear - Flat steel station with support and guide table - Various punches and dies (drawer cabinet) Ksdoxn Tydspfx Ah Nsdg - 1x electric contact length stop - 2x freely movable foot switches - Operating instructions (PDF)

Condition: excellent (used), Profile steel shear, profile shear, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shear -Manufacturer: Mubea, hydraulic profile steel shear type HIW1000 -Drive: hydraulic -Pressure force: 100 tons -Equipment: large support table with stops for die-cutting, various stamps and dies -Production: Punching, shearing, cutting, notching -Dimensions: 2360/760/H1800 mm Kdedpfsx Dclbjx Ah Neg -Weight: 2700 kg

Condition: excellent (used), Catalogue number: 7547 TECHNICAL DATA Track width: 300 mm Roll working width: 290 mm Max. disc diameter: 300 mm Disc bore diameter: 70 mm Max. cutting height: 100 mm Table width with extension: 680 mm Table length: 1630 mm *From above: 2 rows of pawls Metal pressure slip roller Roller with saws 2 smooth metal pressure slip rollers From below: Guide rail Pawls Track Electric height adjustment of main body (up/down) Central track lubrication 2 feed speed modes Feed motor: 1.1 kW Main motor: 22 kW Extraction nozzle diameter: 130 mm Overall dimensions (L/W/H): 2000x1400x1700 mm Ksdpfx Asx Uz T Ueh Njdg Weight approx.: 900 kg – Italian manufacture – Very good condition – Used multi-blade saw Net price: 34,900 PLN Net price: 8,300 EUR (based on 4.2 EUR rate) (Prices may vary according to rate fluctuations)

Condition: excellent (used), Catalogue number: 7545 TECHNICAL DATA Track width: 250mm Shaft width: 220mm Max blade diameter: 300mm Blade bore diameter: 60mm Cutting height: 100mm Table width: 650mm Table length: 1460mm – Top: 2 rows of pawls Smooth feed roller Blade shaft Smooth feed roller – Bottom: Guide rail Pawls Kjdpfx Ajx Uz Tujh Njdg Track 2 feed speed settings + stepless adjustment Central lubrication Feed motor: 1.2kW Main motor: 21kW Extraction outlet diameter: 180mm Overall dimensions (L/W/H): 1700x1450x1500mm Weight: approx. 1800kg – Made in Italy – DTR technical documentation – Robust machine – Used multi-blade saw, in very good condition Net price: 25,900 PLN Net price: 6,160 EUR depending on exchange rate 4.2 EUR (Prices may vary with significant fluctuations)

Condition: new, Year of construction: 2026, functionality: fully functional, *All of our products are carefully manufactured and have a 1-year warranty! *Installation and Operator Training are FREE! FTC-200-S Mobile Cone Crusher (With Screen); It consists of a feeding bunker, cone crusher and stock conveyor belt and generator. FTC-200-S Mobile Cone Crusher (With Screen), which is moved by remote control on a tracked chassis, successfully completes all commands given by the user by moving on its tracks in all kinds of difficult climate conditions and rough terrain. FTC-200-S Mobile Cone Crusher (With Screen), is precisely designed and carefully manufactured for stone crushing and is the leading mobile cone crusher in the sector with a crushing capacity of 100-200 T/H per hour. FTC-200-S Mobile Cone Crusher (With Screen) does not require an extra infrastructure as a production method, it is moved by remote control as mobile and adapts to all difficult terrain conditions. TECHNICAL SPECIFICATIONS: Model: FTC 200-S Crusher Type: Cone Crusher Vibrating Screen Size: 1300x3000 mm Production Capacity: 100-200 T/H Maximum Feed: 185mm Kedoyaqqxjpfx Ah Nedg Total Power: 300 kVA Weight: 46,000 Kg PLEASE CALL US FOR DETAILED INFORMATION!!!

Condition: excellent (used), Professional digital micrometer from the renowned brand Mahr – model Micromar 40 EWR(i) – designed for extremely precise measurements with accuracy up to 0.001 mm. The device in IP65 version is resistant to dust and water, making it ideal for applications in metrology, quality control, and industrial workshops. . Measuring range: 100 – 125 mm . Accuracy: 0.001 mm . Digital readout with large, easy-to-read LCD display . Protection rating: IP65 – resistant to dust and splashes . “ABS” and “Hold” functions – quick measurement hold and zeroing function . High-stiffness frame, ergonomic grip . Includes original box, certificate, user manual, and 100 mm calibration standard . Condition: virtually new / only used for testing Kdsdpfexl Rgiox Ah Nog

Condition: excellent (used), For sale: professional ORION milling holder – German precision and top-quality workmanship. • Type SK40 Ø8-100 K • DIN 69871 AD/B standard – central coolant supply through the spindle • Weldon clamping (side screw) for Ø8 mm tools • Total length 100 mm • Very good condition, used – fully functional • Complete with tool (milling cutter / drill as shown in the photo) Ideal for CNC machining centers and milling machines with SK40 taper. Ksdpfxjxcgygs Ah Njdg

Condition: excellent (used), For sale: professional ORION milling toolholder – German quality and precision. • Type SK40 Ø10-100 (Weldon) • Standard DIN 69871 AD/B – spindle-through coolant • Total length 100 mm • Tool clamping for Ø10 mm (side screw) • Includes tool – milling cutter / drill bit (visible in photo) • Very good condition, used, fully functional. ORION toolholders are an ideal solution for CNC machining centres and milling machines with SK40 taper. Kdodpexcgytsfx Ah Neg

Condition: excellent (used), For sale: CNC tool holder GARANT (Hoffmann Group) – model SK40-16-100. High-quality clamping system for milling machines and machining centres, ideal for precision metalworking. • SK40 taper – industrial standard • Clamping diameter Ø16 mm • Length 100 mm • Balancing G2.5 – up to 25,000 rpm • Max. tightening torque 50 Nm • Premium brand – GARANT (Hoffmann Group) • Very good condition, used, fully functional – equipped with cutters/drills. -- PRICE IS FOR 1 PIECE -- Kdjdow Sy Epjpfx Ah Njg

Condition: excellent (used), Professional tool holders from the renowned brand GARANT (Hoffmann Group). Model 300230 6 SK40-6-100 – clamping diameter Ø6 mm, length 100 mm. • SK40 taper – CNC standard • Clamping diameter Ø6 mm • Holder length 100 mm • Maximum rotational speed 25,000 rpm • High precision and clamping stability • Used, fully functional and ready for work. -- PRICE LISTED FOR 1 PIECE -- Kdedpjw Sy D Eofx Ah Nog

Condition: excellent (used), Very good condition, precision holder from the renowned brand WNT, made in Germany. Equipped with Centro-P HPC16 bush, ensuring high runout accuracy and stable tool clamping. A solid carbide VHM end mill for precision machining is mounted on the holder. Total length A=100, SK40 mounting type (DIN 69871 AD). Premium-class equipment, ready for work on CNC machining centres. Kdsdpfsw Rrzmox Ah Njg

Condition: like new (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: vec1206-L-1809RO1, input voltage: 400 V, total length: 7,000 mm, total width: 7,000 mm, total height: 2,000 mm, compressed air connection: 6 bar, type of input current: three-phase, year of last overhaul: 2024, overall weight: 2,000 kg, input current: 11 A, mount diameter: 7,000 mm, loading space length: 7,000 mm, loading space width: 3,000 mm, loading space height: 2,000 mm, Laminated steel frame. safety bars for each print head and loading/unloading station. - Safety barrier to prevent operators from entering the stations during work -FOOT PEDAL (print order) -SERVOINDEXATOR-Precise pallet position control +/- .001". Ensures smooth indexing with superior print consistency -Increase production with precise control of acceleration and deceleration direction index: right and left -Programmed with Step-Back, Multi Step-Back and Cycle indexing options -Adjustment of the carousel stroke in both directions -15" TOUCHSCREEN with Aries 2 operating system Easy operator access to all machine parameters Program multiple heads simultaneously Full speed control in both directions of travel View number of prints in real time, speed (pcs/hour) Kedpfx Ahevccqxe Nsdg Save all parameters of a stored job: indexer speed, head speed of printing, printing area, number of strokes, time and temperature flash polymerization, color design Setting the preheating temperature of the pallets Quick setting at the same print speed and distance for all heads -Electrically operated PRINT HEADS-10 stations, 6 colors, 4 intermediate flashes, 12 pallets -VERY USEFUL for printing with water-based ink (automatic screen flooding system with ink after printing) - adjusting the screens (templates) with maximum precision in 3 points (front-back, left-right, rotational movement) -adjusting the distance between the pallet and the screen giving you the flexibility to print practically any ink on any substrate at the touch of a button - independent adjustment of the angle of the scraper and counter-scraper, with possible adjustments do with one hand - INTERMEDIATE FLASHS - RAPID WAVE QUARTZ QUARTZ FLASH 51cmX53cm (12 lamps) maximum coverage area Each of them is divided into 3 separate areas (front, middle, back) that can be used depending of the print size: area one, area two, area three, each two/all three CONFIGURED FOR THE POSSIBILITY OF INTERMEDIATE DRYING AFTER EACH PRINT: PRINT/FLASH/PRINT/PRINT/FLASH/PRINT/FLASH/PRINT/FLASH/PRINT/FLA SH/PRINT (POLYCROMY AC-powered printheads enhance finesse, speed and power Front and rear travel adjustment One-handed tool-free squeegee/flood bar lock for quick and easy charging and changing 15" touch screen with Aries 2 operating system Easy operator access to all machine parameters Program multiple heads simultaneously Full speed control in both directions of travel View real-time number of prints (dozen) and speed (pcs/hour) Save all parameters of a stored job: non-contact, indexer speed, indexer speed, printhead speed, print area, number of strokes, flash curing time and temperature, color design, mode Set the pallet preheat temperature Quickly set the same print speed and distance for all heads Print heads AC electric print heads for a stronger and smoother stroke Press the button at the loading/unloading stations to prevent printing on empty pallets Adjustable side supports for low-profile screens for easy access True three-point micro-registration (front to back, left to right and roll motion)

Condition: used, Tank capacity (litres) 100 Motorized pumps Up to 2 external each tank Dosing capacity Max. 50 cc/sec. per pump Remote technical support Kdsdpovpfhysfx Ah Nsg

Condition: used, Drill, column drill, column drill, pillar drill, box column drill, tapping machine, tapping machine Kjdpfshv S Etox Ah Nedg -Manufacturer: HIW Helmerding, drill press -Motor: 1.0/1.6kw -Speeds: 95 - 1050 rpm, 8 levels -Feed: 0.08/0.16/0.28 1/rev. -Table size: 500 x 400 mm, travel 685 mm -Spindle mount: MK3 -Spindle stroke: 180 mm -Projection: 280 mm -Dimensions: 1100/650/H2340 mm -Weight: 690 kg

Condition: used, functionality: fully functional, The used STOW shelf racking system (Type: Stowshelf) is a high-quality solution for structured storage in workshops, warehouses, or industrial environments. With approx. 100 linear meters in length, 60 cm depth, and a height of 3.0 m, this shelving system offers sturdy galvanized steel shelves (each 126.5 × 60 cm, load capacity up to 100 kg) across 7 storage levels. The frames are galvanized and pre-assembled – ideal for fast and straightforward installation. The shelving system is available directly from stock – perfect for anyone looking to purchase a robust and sustainable used racking system. Note: The racks must be secured on-site against tipping. The uprights can be shortened to a height of approx. 230 cm. Please note: The racking described serves as an example. The STOW shelf racking system is modular and can be customized to your desired length – precisely according to your requirements. PRODUCT DETAILS: Height: approx. 300 cm Depth: approx. 60 cm Length: approx. 10,000 cm Manufacturer: Stow Type: Stowshelf Shelves: approx. 126.5 × 60 cm, galvanized Load capacity: 100 kg per shelf Uprights: approx. 300 × 60 cm, galvanized, pre-assembled Storage levels: 7 levels Version: Used STOW system Kjdpox Tgg Dofx Ah Nedg SCOPE OF DELIVERY: 78 x uprights (approx. 300 × 60 cm), pre-assembled 539 x shelves (approx. 126.5 × 60 cm) 2,156 x shelf supports 20 x cross braces Price: €6,533.00 net €7,777.27 gross You will receive an invoice with VAT shown separately. DELIVERY, INSTALLATION & INSPECTION: Delivery throughout Germany by our partner forwarding company – freight costs depend on your postcode Professional assembly and disassembly by trained teams available as an option Rack inspections in accordance with DIN EN 15635 by certified inspectors Inspection of existing heavy-duty racking of other manufacturers also possible PLANNING & CONSULTATION: Our planning department will gladly prepare a non-binding, tailored offer for you – individually adapted to your requirements. Whether for new construction, conversion, or expansion – we provide expert advice on your racking configuration. SHOWROOM: We invite you to visit our showroom! On site you can get a comprehensive view of our pallet racking, storage racking, and all other solutions. Many systems are set up and available for direct inspection. Our specialist consultants are at your disposal for questions and individual advice – we look forward to your visit! Didn't find what you were looking for yet? Take a look at our website – here you will quickly find an overview of many offers and product variations! ARE YOU INTERESTED OR HAVE QUESTIONS? Simply contact us by message or phone call. You can find our telephone number on our company page. We are available by phone from Monday to Friday, 8:00 AM to 4:00 PM. Alternatively, you can send us a message with your name and number and we will get back to you as soon as possible.

Condition: new, Hot-dip galvanized pallet racking for outdoor use Data : - H : approx. 450 cm - D : approx. 110 cm - L : approx. 100.16 running meters - Load: 3000 kg shelf load - Stand in hot-dip galvanized - Cross beams 270 x 14 x 5 cm, T30 Kjdpfxjx Tgdio Ah Nedg - Cross beams in hot-dip galvanized - New BLT / PR45 FVZ - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 037 x upright approx. 450 cm x 110 cm, pre-assembled. - 144 x crossbar approx. 270 x 14 x 5 cm, T30. - 288 x locking pins. - 288 x M8 x 20 locking screw incl. nut. - Levels: Floor + 2 - 324 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 19.900 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Customer note : When installing the locking pins / locking screws, it may be necessary to re-drill holes that have been glued through the hot-dip galvanizing. Unfortunately, this cannot be ruled out with high-quality hot-dip galvanizing. Please contact us if you have any questions.

Condition: used, functionality: fully functional, The used Stow pallet racking system is a high-quality heavy-duty rack designed for industrial storage – approximately 100 linear meters in length and 7 meters high. Ideal for logistics, warehouses, and trades requiring maximum storage capacity in a minimal footprint. Manufactured in Europe, this racking system stands for stability, quality, and durability. Now available directly from stock – perfect for businesses with a high turnover of goods. Customizable to your requirements: The rack frames can be individually modified to your desired height – precisely and professionally in our workshop. Contact us – we offer tailor-made solutions for your storage needs. PRODUCT DETAILS: - Height: approx. 700 cm - Depth: approx. 110 cm - Length: approx. 10,000 cm (100 linear meters) - Shelf load: 3,200 kg - Beams: 360 x 14.5 x 5 cm - Beam color: RAL2004 (orange painted) - Uprights: 700 x 110 cm, RAL5015 (blue painted), pre-assembled - Levels: floor + 3 - Pallet spaces: 432 incl. floor positions - Version: Used Stow equipment INCLUDED IN DELIVERY: - 28 x upright frames (approx. 700 x 110 cm), pre-assembled - 162 x beams (approx. 360 x 14.5 x 5 cm) - 324 x safety pins Price: €9,800.00 net €11,662.00 gross An invoice with VAT shown will be issued. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery within Germany by our partner carrier – shipping costs depend on postal code - Professional installation and dismantling by trained teams available as an option - Rack inspections in accordance with DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTING: Our planning department will be happy to prepare a non-binding, customized offer based on your requirements. Whether new builds, conversions, or expansions – we offer expert advice for your racking configuration. SHOWROOM: You are welcome to visit us in our showroom! Experience our pallet racks, storage racks, and other solutions firsthand. Many systems are assembled and can be viewed in operation. Our specialists are on site to answer your questions and provide personalized advice – we look forward to your visit! Haven't found the right solution yet? Visit our website for a quick overview of numerous offers and product variations! INTERESTED OR HAVE QUESTIONS? Kodpfxox Tfzgj Ah Nedg Simply contact us by message or phone. Our telephone number is available on our company page. ☎️ We can be reached by phone Monday to Friday, 08:00 – 16:00. Alternatively, send us a message with your name and number and we will get back to you as soon as possible.

Year of construction: 2024, condition: as good as new (ex-display), -usable internal dimensions: D=970mm H=540mm (other sizes on request) -touch screen -injection pressure: 3 bar -basket load: 200kg Kodpfxof A Nq Uo Ah Nedg -Tank volume: 210L -Standard accessories: - Oil skimmer - Frame, cover and housing made of stainless steel - Time-controlled electric steam extraction - Reinforced basket in stainless steel - Stainless steel electric pump - Stainless steel filter on the suction side of the pump - Stainless steel heating elements - Mechanical basket rotation with gear motor - Electrical system IP 65, control via SPS (DGT V4) - Automatic water supply - Safety limit switch monitors the cover opening - Spray nozzles in stainless steel - Weekly timer for heating and oil separator - Operating hours counter

Condition: excellent (used), Year of construction: 2005, Steam boiler Viessmann Vitoplex 100LS-440 kg/h. Year of manufacture 2020. 1 bar We speak Russian! Viewings only by prior telephone arrangement! Preferred sale to dealers, tradespeople, or for export. Ksdpfx Ahei Dfcfe Nodg All information without guarantee. Subject to error and prior sale. The seller accepts no liability for typing or data transmission errors. We are happy to purchase your used boiler or burner! Of course, we handle all formalities. Loading possible.

Condition: like new (used), Spiral dough mixer Capacity: 100 kg of flour 160/180 kg of dough Diosna Kjdpsx N Ed Tjfx Ah Njdg Container volume: 260 liters Electrical power: 380V / 50Hz / 3N/PE Two timers Two speeds Rewind option Half cover with safety switch Wheels with brakes

Condition: used, Year of construction: 2023, operating hours: 276 h, machine/vehicle number: 231004760, fuel type: diesel, motor manufacturer: Iveco N67.TEVP05, General information Field of application: Construction Weights Empty weight: 3.045 kg Functional Generator capacity: 220 kVA CE mark: yes Other information Fuel consumption: 29.7 liter @ 70% load Generator: UCI274H Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage V / Tier V Water tank volume: 580 l Transport dimensions (LxWxH): 4x1,19x2,1 Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information Kdsdpfx Aexctayeh Neg

Condition: as good as new (ex-display), Super practical heavy table,good quality Welding rotary table 100 KG load capacity Max. Load: 100Kg horizontal Max. Load: 50Kg vertical Kedpfo Ugnbjx Ah Njdg Rotation speed: 1- approx.7 rpm Rotation direction: left and right Faceplate speed: manually adjustable Face plate diameter: 345mm height of faceplate: 415mm Inclination angle of face plate: 0-90 Motor power in operation: 0,12kw dimensions: 500 x 470 x 415mm Power: AC 110V / 220V 50/60Hz On request with jaw chuck / quick chuck extra charge 180.-€ Free delivery 90.-€

Condition: good (used), Super practical heavy table, good quality Welding rotary table 100 KG load capacity Max. Load: 100Kg horizontal Max. load Load: 50Kg vertical Rotation speed: 0,5-9 rpm Rotation direction: left and right Faceplate speed: manually adjustable Kdodpfjcctnasx Ah Njg Diameter faceplate: 345mm Height of faceplate: 415mm Inclination angle faceplate: 0-90 ° Motor power in operation: 0,12kw dimensions: 500 x 470 x 415mm Power: AC 110V / 220V 50/60Hz On request with jaw chuck surcharge 160.- Free delivery 80.-

Condition: good (used), Karl Tranklein EK-100 Corner Cutter Made in Germany. Very good condition. This is a professional, production-grade corner rounding machine. Sturdy cast iron construction and strong pressure ensure precise operation. Replaceable blades. Adjustable margins. One set of blades included. Stack height: 100mm Kdjdpfjx Nc Aajx Ah Neg Weight: 130kg Cycles per minute: 50 cycles/min Power supply: 400V Waste is collected in containers. This is the model currently in production.