Condition: excellent (used), Year of construction: 2003, operating hours: 2,916 h, Functionality: fully functional, machine/vehicle number: P 032B1591, workpiece weight (max.): 1,000 kg, feed length X-axis: 550 mm, feed length Y-axis: 370 mm, feed length Z-axis: 410 mm, feed rate X-axis: 900 m/min, feed rate Y-axis: 900 m/min, feed rate Z-axis: 900 m/min, continuous power (apparent): 13 kVA, feed length W-axis: 120 mm, The subject of the sale is a Fanuc Robocut Alpha-1iB EDM machine. Croln S N Tovwk Alsbjb The year of production of the machine is 2003. The machine has worked 2916 hours, including 178 hours of cutting. The machine has been described by the expert as efficient and in very good condition. Axis travel: X: 550mm / 900 mm/min Y: 370mm / 900 mm/min U: 120mm / 450 mm/min V: 120mm / 450 mm/min Z: 410mm / 900 mm/min

Year of construction: 2008, Condition: refurbished (used), AGIECUT Challenge V3, Year of manufacture 2008 travels: X= 500 mm, Y= 350 mm, Z= 256 mm travels U/V-axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Crolnom Amf Dj S N Tbjb Achievable surface quality: Ra: 0.2 µm Available wire diameters: 0.10 - 0.33 mm Water bath machine with automatic wire threading With automatically lowerable tank (accessible from 2 sides) Incl. AGIEJOGGER- hand box for comfortable set-up Incl. AGIESETUP 3D AGIEVISION 5 control system AGIE IPG-V generator Dimensions (length x width x height): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine is cleaned, overhauled and extensively tested by us after receipt of order. Incl. user training at Techma on your overhauled machine Optional: transport, commissioning, training, cooler

Condition: used, Year of construction: 1980, table length 780 mm table width 500 mm ampere - A Control Heidenhain 121 total power requirement - kW weight of the machine ca. 3,5 t dimensions of the machine ca. 2 x 2 x 2 m No. 1564 Die-sinking EDM machine HANSEN 750 S max. workpiece weight 100 kg Working area: 500 x 300 x 375 Control: Heidenhain TNC-121 Eropuls NC-2000 Crelnsvniaqe S N Tbob Table 780 x 500 mm Space requirement approx. 2 x 1.5 m Weight approx. 3.7 tons

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,510 mm, travel distance Z-axis: 650 mm, workpiece weight (max.): 7,500 kg, total height: 3,900 mm, total width: 2,950 mm, total length: 3,430 mm, Equipment: documentation/manual, For sale: OPS Ingersoll Gantry 1200 EDM machine, built in 2004, with a general overhaul in 2016. The machine was running flawlessly until recently and is in very good condition. An on-site inspection is possible, but please note that the machine is currently not powered. For sale: OPS Ingersoll Gantry 1200 EDM machine, built in 2004, with a general overhaul in 2016. Crelnovwa Nbs S N Tbsb The machine was running flawlessly until recently and is in very good condition. An on-site inspection is possible, but please note that the machine is currently not powered.

Condition: refurbished (used), Year of construction: 2006, Status: completely overhauled Control: Mitsubishi - 64 bit CNC Generator power: 70 amps - multipulse Cjln Sevmggfo N Tbsrb Travel paths (X, Y, Z): 1000 x 1500 x 650 mm Electrode changer: 30-way pick-up plate changer Work container (W x D x H): 1770 x 1270 x 680 mm Workpiece clamping table (W x D): 1640 x 1140 mm Load capacity: 7,500 kg Accessories: - CO2 fire extinguishing system - Cartridge filter system - HSJ technology (High Speed Jump)

Condition: as good as new (ex-display), Year of construction: 2015, operating hours: 985 h, travel distance X-axis: 905 mm, travel distance Y-axis: 705 mm, travel distance Z-axis: 455 mm, workpiece weight (max.): 3,000 kg, EDM314MF30 - SLM (second-live-machine) General overhaul Travel paths X x Y x Z 900x705x455mm Machine table 1150x850mm Container size 1200x900mm Distance table/chuck 260/710mm Electrode weight 50/500kg Workpiece weight max. 3000kg Overall dimensions of machine 2210x3450x3250mm Power supply 400V/DS/50/60Hz Container height 750mm Equipment: MF30 user interface Movable control panel Touch screen Lift speed 15000mm/min (high jump) Eroding generator 60A Integrated cooling unit Cartridge filter system Tool changer 8-fold C-axis with direct measurement, resolution 0.0001 degrees Csln S Nehfaizo Tbsrb C-axis as positioning - rotation - and erosion axis C-axis 100 rpm. Automatic container tracking Filling, filter and rinsing pump Transport IB Training 12 month warranty

Condition: refurbished (used), Year of construction: 2012, operating hours: 24,760 h, Functionality: fully functional, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 200 mm, total length: 220 mm, total width: 200 mm, type of input current: three-phase, net weight: 2,450 kg, GF CUT 200 MS, year 2012. Excellent condition, the machine will be cleaned, revised and tested. Option 0.1 mm. Available in our workshop in Semsales during March. Celn Sevvlhyo N Tberb

Year of construction: 2006, Condition: refurbished (used), AGIECUT Challenge 3 eCut Year of construction 2006 Travels: X= 500 mm, Y= 350 mm, Z= 256 mm Travels U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Creln S N Togfm Rrobjb Achievable surface quality: Ra: 0.2 µm Available wire diameters: 0.10 - 0.33 mm Water bath machine with automatic wire threading With automatically lowerable container (accessible from 2 sides) Incl. AGIEJOGGER hand box for convenient set-up Incl. AGIESETUP 3D AGIEVISION control unit AGIE generator with eCut technologies for faster and more efficient processing Dimensions (length x width x height): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine is cleaned, overhauled and thoroughly tested by us after receipt of the order. We then put the machine into operation on your premises. You receive a 6-month warranty on the machine. We are happy to offer you the following additional services: - Control and maintenance training - Cooling unit - Programming system - Consumables - Clamping devices - Transportation

Condition: used, Spark erosion machine Manufacturer: Charmilles Technologies Model: Form 2 – LC Year of manufacture 1992 Generator: 50A Space requirement: 1200 x 1300 x 2200 mm (LxWxH) Weight: 1100kg Work basin: 800 x 480 x 250 mm (LxWxH) Travel paths X/Y/Z: 300 x 200 x 150 mm Electrode weight: max. 60 kg Workpiece weight: max. 500 kg Equipment: - 3-axis digital display Heidenhain VRZ 760 Coln Sovld Iws N Tberb - System 3R clamping device - Machine light - Fire extinguishing device The machine can be demonstrated on site under power. All information without guarantee Subject to errors and prior sale

Condition: excellent (used), Year of construction: 2011, Functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, total height: 2,783 mm, total length: 3,574 mm, total width: 3,143 mm, workpiece height (max.): 590 mm, table width: 875 mm, overall weight: 5,700 kg, table length: 1,110 mm, For sale: Mitsubishi FA30V Advanced with Z600 specification, allowing a cutting height of up to 600 mm. The machine was running flawlessly until the end and is in excellent condition. A viewing at our location is possible; however, the machine is currently not powered. Cjln S Nevv T D Nj Tberb In addition to the 600 mm cutting height, the machine is equipped with a device for large wire spools. For sale: Mitsubishi FA30V Advanced with Z600 specification, allowing a cutting height of up to 600 mm. The machine was running flawlessly until the end and is in excellent condition. A viewing at our location is possible; however, the machine is currently not powered. In addition to the 600 mm cutting height, the machine is equipped with a device for large wire spools.

Condition: excellent (used), 2 pieces Equivalent to EROWA UPC pallets made of steel with hole pattern M6, 20mm grid hole Dimensions: 320 x 320 x 40 Design: steel, centering segment and clamping pin mounted Hard Z-support. Application: For clamping workpieces and gauges. Croln Sovmgfbe N Tbeb Hole: M6 hole pattern, 20mm grid hole

Condition: good (used), Year of construction: 2005, Functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 500 mm, rotational speed (max.): 60 rpm, TECHNICAL DETAILS Travel X/Y/Z axes: 500 x 350 x 500 mm Max. workpiece dimensions (width x depth x height): 880 x 680 x 350 mm Max. workpiece weight: 800 kg Workpiece area Work tank type: Automatic lowering tank Internal tank dimensions: 1,090 x 730 x 490 mm Bath height: 0 - 390 mm Machine table Clamping surface: Grid plate with 50 mm hole grid Programmed brake position: yes Dimensions: 800 x 600 Integrated C-axis Indexing and rotation: Interpolation with X, Y and Z as well as spiral machining Speed: 60 rpm Max. working current: 72 A Electrode changer Automatic: integrated Electrode weight: 100 kg Generator Type: AGIE IPG "Intelligent Power Generation" Best surface roughness Ra: 0.1 µm Dielectric unit Loading volume: 620 l Filter quality: 4 cartridges with 8 filter elements Cooling system: water/air heat exchanger Temperature control: ± 1 °C automatic MACHINE DETAILS System dimensions: 2,855 x 2,135 x 2,965 mm Crolovuqxben S N Tbsb Distance floor - clamping height: 884 mm Net weight: approx. 3,900 kg Gross weight: approx. 5,500 kg Cooling System: water/air cooler for generator, control and dielectric Norms and guidelines Standards: Directive 89/336/CEE Electromagnetic compatibility

Condition: ready for operation (used), Year of construction: 1998, Functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 315 mm, workpiece weight (max.): 500 kg, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Control: Heidenhain dialog control TNC 223 B Planetary functions: available Magnetic tape drive: available Rotary spindle: available C-axis: controlled Work table Dimensions (L x W): 576 x 400 mm Dielectric height above table: 265 mm Maximum workpiece weight: 500 kg T-slots number x width: 3 x 10 mm Distance table - spindle: 475 - 160 mm Work head Adjustment range X-Y: 350 x 250 mm Adjustment range Z: 315 mm Resolution X-Y-Z: 0.001 mm Resolution C-axis: 0.001° Rapid traverse speed: 1000 mm/s Maximum electrode weight with/without rotation: 15 / 50 kg Dielectric supply Filter system: paper candle filter Cooling: electrically controlled heat exchanger Capacity: 200 l Paper candle filter: 3 pieces Accessories and equipment Electrode changer: 16-way Chuck: EROWA Rinsing distributor: 14-way Rinsing volume regulator: 15 levels C-Box: available MACHINE DETAILS Dimensions (H x W x D): 2,465 x 840 x 1,395 mm Crsln S Nsvt S Sms Tbeb Weight: 1,850 kg Generator Dimensions (H x W x D): 1,800 x 600 x 920 mm Weight: 300 kg Rated current: 30 - 60 -120 A Connection value: 7 - 15 - 23 kVA

Condition: refurbished (used), Year of construction: 2008, Functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, workpiece weight (max.): 2,000 kg, quill stroke: 400 mm, distance table to quill: 215 mm, workpiece length (max.): 920 mm, workpiece width (max.): 550 mm, workpiece height (max.): 550 mm, overall weight: 4,000 kg, Die-sinking EDM machine GF AgieCharmilles Spirit 4 Croloq N Ap Sjn S N Tbeb Year of construction 2008 Travel (X/Y/Z): 700 x 500 x 400 mm Max. Workpiece dimensions: 920 x 550 x 370 mm Max. Workpiece weight: 2000 kg Distance table - quill: 215 -615 mm Bath level up to 415 mm Incl. pneumatic chuck 3R-Systems or Erowa ITS 50 of your choice Incl. 28-fold electrode changer Max. Electrode weight: 80 kg Incl. C-axis with U=0-40 rpm Total weight (without dielectric): 4000 kg Dimensions: 3000 x 3000 x 2865 mm The machine is cleaned, serviced and tested by us after receipt of order. We are happy to offer you the following additional services and products: - Commissioning - transportation - training - Clamping devices - Dielectric - Cooling unit

Condition: excellent (used), Year of construction: 2021, operating hours: 11,294 h, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, total height: 2,320 mm, total length: 3,400 mm, total width: 2,160 mm, workpiece height (max.): 350 mm, workpiece width (max.): 800 mm, workpiece length (max.): 1,030 mm, type of input current: three-phase, table width: 630 mm, overall weight: 5,440 kg, table length: 950 mm, Wire EDM machine Crolnsvtpi Nj S N Tbjb Manufacturer: GF Machining Solutions Model: CUT E 600 Year of manufacture: 2021 Travel paths: X / Y / Z: 600 / 400 / 350 (mm) Extras: 16kg spools Condition: Very good and well-maintained condition Payment terms: 100% before dismantling and loading The machine is powered and will continue to be used. A viewing and test run are possible. The machine can be handed over at short notice by arrangement.

Condition: used, Year of construction: 1996, Drahterodiermaschine (765), Fabr. Charmilles, Typ ROBOFIL 510, Bj 1996, SN 550492, Anschlussleistung 10,0 kVA, Maschinengewicht 3.350 kg, 5-achsig, Verfahrweg X/Y/Z 700 x 400 x 400 mm, Aufspannplatte 1.200 x 700 mm, Tischbelastung max. 1,200 kg, Werkzeugspannsystem, Fabr. Hirschmann, Steuerung, Fabr. Charmilles, defekt, Maschine fährt nicht hoch (Softwarefehler) Celsu Ava Ren S N Tborb

Condition: excellent (used), Functionality: fully functional, We are offering a used EROWA UPC chuck here. ER-016841. The UPS chuck is in very good condition and fully functional. Viewing possible by appointment Coln S N Tovmgdkjberb Shipping and viewing possible!

Condition: good (used), Year of construction: 2013, operating hours: 20,791 h, Functionality: fully functional, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, workpiece height (max.): 250 mm, workpiece width (max.): 550 mm, workpiece length (max.): 750 mm, TECHNICAL DETAILS Max. workpiece dimensions width x depth x height: 750 x 550 x 250 mm Max. workpiece weight: 200 kg (submerged), 450 kg (not submerged) Travel paths Travel paths X/Y/Z axes: 350 / 250 / 256 mm Travel paths U/V axes: ±70 mm Max. taper at height: 30° at 100 mm Positioning speeds Manual positioning speed X/Y/Z/U/V axes: 2 m/min Programmable positioning speed X/Y/Z/U/V axes: 3 m/min Remote control Functions: wire drive, work container, measuring cycles Display resolution: 0.0001 mm Jogger: electronic handwheel for X/Y/U/V/Z axes Control console Display: TFT 15" XGA (1024 x 768) Input elements: alphanumeric push buttons, keyboard/mouse Wire threading system Threading height: up to 250 mm Threading nozzle diameter: 2 mm Combined wire guide Wire diameter: standard 0.07 - 0.3 mm (option: 0.05 mm) V-Guide: cylindrical to 2° Toroid guide: 2° - 30° Wire drive Wire spool: up to 25 kg Wire tension: 0 - 25 N Wire speed: 0 - 300 m/s Wire guide: semi-automatic Wire disposal: Schopper Work container Access: automatic lowering container Clamping system: clamping support or universal Clamping frame Operating mode: water bath and/or coaxial flushing Height adjustment: 0 - 250 mm automatic Flushing Flushing pressure: 0.2 - 18 bar programmable Flushing combination: coaxial/flushing/extraction Dielectric unit Load volume: 700 l Pre-cleaning: 10 µS/cm Water quality: 4 canisters with 8 filter cartridges Deionization resin: 10 l Water conductivity: 2 µS/cm automatic Cooling system: water/heat exchanger Creln S N Tovuqtfebob Temperature control: ±1 °C automatic IPG generator Generator: integrated Average working current: 38 A Feed control: servo-controlled/fixed feed Cooling system: air/heat exchanger Max. cutting speed, cylindrical: 300 mm²/min Best roughness Ra: 0.1 µm Average contour deviation Tkm: ± 1 µm (Tf 6 µm) Vision 5 control Control/operator interface: Vision 5 Operating system: Windows XP Operating mode: Multiprocessor Units of measurement: mm/inch Instruction set: absolute/incremental Smallest programmable step: 0.0001 mm Max. instruction length: 15 digits with floating point Max. path correction: 6 mm MACHINE DETAILS Dimensions width x depth x height: 2,095 x 1,950 x 2,247 mm Distance floor - clamping surface: 1,100 mm Net weight: 2,800 kg

Condition: like new (used), Year: 2023 Machine travels: 800 x 450 x 640 x 360mm (X * Y * Z * W) Machine Dimension: 1910 x 1990 x 2240mm (2600mm Max) (W x D x H) Machine Weight: 1700Kg Max Weight for workpiece: 500Kg 2 Axis indexer with 3 jaw chuck Crolnsvgd Rzo S N Tbjb Usable Electrode Diameter: ø 0.1 ~ ø 6.0mm Usable Electrode Length: 200 ~ 600mm, Drilling depth : 360mm Maximum Power: 3ø 415V 50㎐(Changeable) Max Allowable Current: 30A Rated Power Capacity: 5KVA Pneumatic Pressure Required: 5 bar Self-contained water system with filtration and deionisation system with sensor CNC programmable, from DXF or CNC auto hole patterns for PCD, Rows, Square, or GM code Auto routines for, set up, hole finding, simple programming

Condition: new, Year of construction: 2024, travel distance X-axis: 450 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, total height: 2,380 mm, total width: 2,200 mm, total length: 2,000 mm, table width: 400 mm, table length: 700 mm, table load: 400 kg, ◆ The X, Y, and Z axes all use linear slide rails, Japanese Panasonic absolute servo motors, Taiwan Intime or Shangyin C-class screw rods, and German Rexroth P-class guide rails. ◆ Effectively ensuring the machine tool's performance μ The machine tool has high precision and stability in long-term use, as well as high rigidity and sensitivity. ◆ The column adopts a one-stage structure, which makes the Z-axis more rigid and allows for easy and flexible processing of heavy-duty electrodes. ◆ Adopting immersion processing, effectively ensuring processing accuracy and surface smoothness. ◆ The whole machine adopts centralized lubrication, providing uniform lubrication on all track surfaces, and ensuring smooth and long-lasting axial movement accuracy. ◆ Complete peripheral facilities such as automatic fire extinguishing devices and surface sensing devices for processing fluids provide a safe environment. ◆ The body is made of FC30 cast iron, which has undergone high-temperature annealing and natural aging treatment. 1. Single-axis mirror control system. 2. Intelligent CNC mirror EDM system. 3. Four-axis linkage CNC mirror EDM machine system 4. Mirror EDM expert process library system 5. Linux stable and reliable industrial level operating platform 6. 19′′ touch capacitive display 7. Industrial level metal crystal input keypad + touchpad 8. Maximum support for 5-axis triple linkage 9. Multi-function hand control box (automatic contact counting, clearing, 1/2 and coordinate system switching on the hand box) 10. Minimum drive 0.0001mm 11. Automatic programming system (input material combination, electrode shape, machining depth, machining roughness and machining coordinates to generate machining program) 12. Accidental power-off protection system (accidental power-off machining coordinate memory protection) 13. High-gloss mirror circuit (best finish Ra0.08) 14. Maximum machining speed 800 mm³/min 15. Ultra-low loss, cemented carbide and graphite circuit 16. Small current finishing circuit, minimum IP0.1 17. Machining modules such as deep bone position, large area and screw 18. Machining history (view the last 400 machining and historical operations, machine start-up time and discharge machining time) 19. Anti-carbon buildup, arc release and automatic cleaning of machining surface 20. 60 display machining coordinate systems Cjln Seuihqlo N Tborb 21. Machining information display (display machining time, machining residue and efficiency)

Condition: excellent (used), The machine is in good working order and in very good technical condition Crjlevrrfdjn S N Tbeb

Condition: good (used), Year of construction: 2015, Functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, Incl. radiator Incl. B-axle Hirschmann Crsln Sjvkdh Ie N Tbob

Condition: excellent (used), Year of construction: 2017, operating hours: 7,000 h, workpiece weight (max.): 1,000 kg, Control system: Fanuc Maximum travel length X-axis: 600 mm Maximum travel length Y-axis: 400 mm Maximum travel length Z-axis: 350 mm Travel length U-axis ( -): 120 mm Travel length V-axis ( -): 120 mm Minimum thickness of the wire: 0.10 mm Csln Sovq Swqs N Tbjrb Maximum thickness of the wire: 0.30 mm Maximum table load: 1000 kg Dielectric tank capacity: 850 l Tank dimensions: 1050 x 850 mm Machine height: 2300 mm Machine length: 2635 mm Machine width: 2865 mm Machine weight: 4500 kg

Condition: good (used), Year of construction: 2012, Functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 350 mm, table width: 400 mm, table length: 600 mm, TECHNICAL DETAILS Travel paths of axes X / Y / Z: 400 x 300 x 350 mm Positioning speed of axes X / Y / Z: 6 / 6 / 15 m/min Positioning speed in manual mode of axes X / Y / Z: 2 m/min Acceleration of axis Z: 10.0 m/s² Resolution of axes X / Y / Z: 0.1 µm Laser correction of axes X / Y / Z: linearity / angle / spindle pitch Integrated C-axis Max. electrode weight: 50 kg Rotational speed: 0 -100 g/min Max. mass moment of inertia: 5,000 kg cm² Max. working current: 140 A (in rotation mode) Max. working current: 140 A (static) Positioning accuracy according to ISO 230-2: 0.007° Resolution: 0.0005° Dielectric unit Capacity: 490 l Filter type: 4 cartridges Cooling system: Heat exchanger dielectric / water Temperature control: ±1 °C automatic Generator Generator type: ISPG (Intelligent Speed Power Generator) Pulse current: 80 A Best surface roughness Ra: 0.1 µm IQ module (graphite, copper): integrated Control Operating system: Windows XP Data input: 15" LCD screen, mouse or touchscreen, keyboard and remote control User interface: Vision 5 Work area Clamping plate with hole pattern: Hole spacing 50 mm Distance table - chuck: 170 - 520 mm Distance floor - clamping level: 1,000 mm Max. table size: 600 x 400 mm Max. work basin dimensions: 900 x 630 x 350 mm Workpiece and electrode Max. electrode weight: 50 kg Max. workpiece weight: 800 kg Max. workpiece dimensions: 820 x 580 x 250 mm Bath level: 0–290 mm Compressed air Pressure: 6 - 8 bar Average consumption: 100 ± 10 % m³/h Max. consumption: 270 l/min at a pressure of 6 bar while filling the work tank (duration approx. 40 s) Connection: hose coupling Ø 13 mm Cooling water Temperature: room temperature - 7 °C Quantity: approx. 20 l/min Pressure: 1.5–3 bar Cooling and environment Heat exchanger for control cabinet: integrated Heat exchanger for dielectric: integrated Ambient temperature: recommended 20 °C - 25 °C MACHINES DETAILS Croln S N Tevuqmfsbeb Machine dimensions: 2,460 x 1,410 x 2,600 mm Dimensions with electrode changer: 2,460 x 2,100 x 2,600 mm Dimensions with pallet changer: 2,460 x 2,630 x 2,600 mm Weight Total weight: 3,830 kg Dielectric weight: 400 kg EQUIPMENT 1 heat exchanger for control cabinet, integrated. 1 heat exchanger for dielectric, integrated.

Condition: good (used), Year of construction: 1995, Functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, total height: 1,550 mm, total width: 1,800 mm, total length: 2,050 mm, A Charmilles Technologies die-sinking EDM machine of the Roboform 30 type is for sale The machine is fully functional and ready for immediate use Technical data Year of manufacture: 1995 X-path: 350 mm Y-path: 250 mm Z-path: 300 mm C-path: 360 ° Measuring resolution: 0.5 µm Working basin: 370*940*590 mm Capacity: 200 l Table: 500*400 mm max workpiece weight: 500 kg max workpiece dimensions: 350*750*525 mm Mains supply: 240 V/50 Hz/10 kA Dimensions: 2,050*1,800*1,550 mm Weight: 1870 kg Transportation and loading can be arranged on request, at an extra charge. organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Croln S Nouy T Aqs Tbjb Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website