Condition: used, machine/vehicle number: 008605, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 40 m/min Maximum panel thickness: 60 mm Operating Units: 9 nr Hedpfxozqz Rie Amysr

Condition: used, Storage location: Sonnefeld Hsdpeway Dcjfx Amysr

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Storage location: Nattheim Hedpfx Ajvvkd Tjmysr

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Hjdpfxsvvkfdo Amyjr

Condition: used, Year of construction: 2001, Edge thickness 0.2 - 6 mm Workpiece dimensions Width min. 70 mm Height min. / max. 8 / 42 mm Length min. 150 mm (strip edges) Feed speed: 12 m/min Glue application roller Machine dimensions L x W x H = 3500 x 900 - 1300 x 1250 mm Weight: approx. 1130 kg Power consumption: approx. 6.0 kW, 400 V, 50 Hz Equipment: - Double top pressure with manual height adjustment - Automatic magazine for roll edges up to 800 mm DM - Rapid heating tank with application roller in synchronous and counter-rotating direction - Pneumatic adjustment and resetting of all work units - Pneumatic cross-cutting shears for strip edges up to 3 mm - Manually adjustable infeed ruler - Double cross-cut saw 2 HF motors 0.2 kW, 12,000 n 2 automatic Positions = 0 + 3 degrees - Milling/flush trimming unit with two HF motors 0.43 kW, 12,000 n. Two-sided scanning with two HF indexable cutter heads. Radius scraper, automatically controlled. Flat scraper, automatically controlled. Storage location: Nattheim Hedpfjvvkfqox Amysr

Condition: used, Year of construction: 2002, Machine length: 6240 mm Weight: 2400 kg Power consumption: 14 kW Extraction diameter: 120 / 140 mm Storage location: Nattheim Hedovvkfwopfx Amyer

Condition: used, Year of construction: 2011, Pneumatic milling adjustment (Straight/Radius) Combination milling station R=2 Corner rounding cutter R=2 to 40 mm Jointing cutter up to 40 mm Flat scraper Profile scraper R=2 Short workpieces PLC control with Pro Face touchscreen Nesting Cooling/antistatic spray - airtronic Protective spraying Kante Riepe incl. interchangeable tank Workpiece thickness 8 - 60 mm Mechanical edge clamping Extraction nozzle: 140 mm Dimensions: Length with extension: 4984 mm Depth with roller table: 1425 mm Max. height: 1618 mm Worktable height: 888 mm Weight: 1400 kg Storage location: Nattheim Hsdpexyiiljfx Amysr

Condition: used, Year of construction: 1999, Edge height: 10 - 60 mm Edge thickness: 0.4 - 3 mm Min. curve radius: 20 mm Feed speed: 2 - 18 / 4 - 14 m/min. Motor: 5.2 kW Air pressure: 6 bar Dimensions: 900 x 1300 x 1200 mm Weight: approx. 350 kg Hedpfoymcrbjx Amyer Storage location: Nattheim

Condition: excellent (used), Catalogue number: 7983 TECHNICAL DATA Equipment: - Disc - Pre-milling unit - Tape feeder - Guillotine - Glue tank (granulate) - 4 pressure rollers (1 rubber, 3 metal) - End trimming unit with saw blades front/rear - 2 edge milling units, top/bottom with radius cutters - 2 scrapers for removing excess glue, radius, top/bottom - Corner rounding unit - Straight scraper, top/bottom - 2 polishers - Max feed speed: 10 m/min - Min workpiece length: 260 mm - Min workpiece width: 90 mm - Workpiece thickness: 10–60 mm - Edge banding tape thickness: 0.5–3 mm - Pull-out workpiece support from the table - Total power: 12.3 kW - Extraction nozzle diameter: 140 mm - Dimensions (LxWxH): 5000x1520x1600 mm - Weight: 1295 kg Hjdpfxey Id Nle Amyor ADVANTAGES - Not repainted / original paint - Pre-milling, corner rounding - Control panel with quick selection of pre-set work programs - German made - Full technical documentation (DTR) - Machine after service (inspection date: 17.10.2025, next inspection: 17.10.2026) - Very good condition - Used edgebander Net price: 38,900 PLN Net price: 9,260 EUR (based on exchange rate 4.2 EUR) (Prices may vary depending on exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2018, Biesse Akron 1440 A Edgebander (EVA & HotAir) Description Hodpfx Amjzqdi Usysr Adhesive System: EVA / Hot Air Pre-milling unit RT02 Gluing unit VC-511 End Trimming unit IN-801 Fine trimming Unit RF02 2 motors corner rounding unit AR02 EDGE SCRAPER RB02 GLUE SCRAPER UNIT RC02 BRUSHING UNIT SZ02 HOT AIR BLOWER UNIT PH-501 SMART-TOUCH CONTROL PANEL KIT HIGH QUALITY AND HIGH PRODUCTIVITY = Belt pressure beam. - Automatic track lubrication system. NC AXIS PACKAGE = AX-1: NC axis on the infeed fence. - AX-1: NC axis on edge pressing rollers.- AX-4, NC axes on Fine trimming Unit.- AX-2, NC axes on Corner rounding Unit.- AX-4, NC axes on Edge scraper MULTIPLE-SPEED KIT 12-18 M/MIN ANTIADHESIVE UNIT ADZ02 AIRFORCE SYSTEM - P2 PRO-GLUE KIT ADAPTIVE INFRA RED LAMP AdIRL-700 PRO-NESTING KIT FOR FINE TRIMMING UNIT ROUNDING FUNCTION ONLY SLIDING UNIT FOR CORNER ROUNDING UNIT PRO-NESTING KIT FOR EDGE SCRAPER UNIT CLEANING UNIT LPT02 SOPHIA - IoT Connection (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Holz Her Sprint 1329 Black Edition Heavy-duty version - edge thickness 0.4 - 8 mm (15 mm with tool change) 18.5" touchscreen control, Power-PC color display Motorized, position-controlled bridge height adjustment Pre-milling unit for attachment before the gluing station Hjdpjzdzlmofx Amysr Automatic infeed guide rail 1350 mm MOT Edge magazine, fully automatic for coil and strip material MOT Glue application station GLU-JET cartridges - hot melt and PU gluing, thin-film technology Edge height max. 60 mm Glue height adjustment / sensor nozzle High-gloss package Pressing unit 1913 mot., motorized-pneumatic NC servo axis Cutting unit for coil and strip material up to 15 mm edge thickness with electro-pneumatic adjustment of 0-10° bevel of the cutting saw Multi-function milling unit MOT 6 - NC control axes: Flush trimming 8 mm (15 mm) Radius milling Chamfer milling 0 - 15° Copy milling unit MOT 4, corner copying, postforming corners with 4 NC control axes, for milling the upper and lower longitudinal edge and copy milling the front and rear end edges, vertical edge, working height 60 mm Scraping blade unit MOT4 Surface scraping blade unit – finishing Buffing unit for final polishing and edge polishing with 2 textile discs Spray system for infeed and outfeed areas as well as antistatic agent at the pressing unit Infeed area: electronically controlled release agent spray device Pressing unit: electronically controlled antistatic spray device Outfeed area: electronically controlled cleaning agent spray device with cleaning agent First delivery 2018 / from lease return Machine is WORKSHOP OVERHAULED in TOP CONDITION Available from stock, Lieboch

Condition: used, Holz Her Sprint 1321, with edge banding and PU adhesive application Heavy-duty version – edge thickness 0.4 – 15 mm SPS-based Edgecontrol control panel Motorized, position-controlled bridge height adjustment Pre-milling unit for attachment before the gluing station Fully automatic edge magazine for roll and strip material Gluing unit with cartridge system + PU adhesive application Automatic glue height adjustment / touch probe nozzle Pressure unit 1913, pneumatic Hodpfxozp Hc Us Amyjr Trimming unit for roll and strip material 1918 – 15 mm With pneumatic adjustment for trimming saw angle from 0-10° Multi-function milling unit with motorized adjustment: flush trimming – 15 mm, radius and chamfer milling – 15° Profile milling unit – corner rounding 1833 Scraping unit for chamfers and radii 1929, pneumatic Pneumatic infeed and outfeed Surface scraping unit – finishing, pneumatic Buffing unit for finishing and edge polishing with 2 textile discs HIGH-END spraying system Complete set of tooling Machine is in FULLY OPERATIONAL CONDITION Machine from a craft business / consignment sale Available from stock in Lieboch, NET € 21,500.00

Condition: used, Year of construction: 2017, HOLZ-HER Edgebanding Machine LUMINA 1380 Used machine Year of manufacture: 2017 Condition: Well-maintained Motorized pressure beam adjustment Edge thickness, roll material: 0.4 - 3 mm Edge thickness, strip material: max. 3 mm with unit FF701 max. 8 mm without unit FF701 max. 15 mm with tool change on the multi-function milling unit Edge height: max. 65 mm Workpiece thickness: 8 - 60 mm Workpiece width: min. 60 mm Workpiece length: min. 160 mm Feed speed: continuously variable, 10 - 18 m/min Control system Edge Control 19 with 18.5" touchscreen color display 16:9 ECO MODE energy-saving mode Infeed fence, 1350 mm long Motorized adjustment of infeed fence Joint milling unit 1802, edge feed MG701 SYNCHRO Glue application station Glu Jet GJ302 automatic (refurbished in 2026) Including changeover trolley Including quick-change couplings Including HSK mounting for the unit Including automatic unit detection GLU JET collection container Hjdpfozpzy Uex Amyer Pressing unit 1913 MOT Cutting unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12000 min-1) pneumatically pivoting 0/10° Milling unit FR701 6 fully digital NC servo axes. Profile milling unit FF701 4 fully digital NC servo axes. Scraper unit 1929 MOT4 incl. high-gloss kit Surface scraper FK701 Spraying system 1856 for the infeed and outfeed area Spraying system (release agent) after the pressing unit Automatic chain lubrication Adaptive pressure and glue quantity control Location: Bavaria Availability: approx. August 2026

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Condition: Good (the machine has undergone extensive maintenance every year, most recently in March 2026!) Equipment: - iTronic – Adaptive pressure and glue quantity control with automatic, program-dependent fine adjustment - MOT SPS adjustable infeed fence - Automatic chain lubrication: Intelligent automatic transport chain lubrication - Edge Control 19 control system - EL GRM variable, 400V 50Hz, 2.2kW V2 SPRINT 1329 PERFORMANCE 400V 50Hz - Edge Control 19 control system with 18.5" touchscreen color display, 16:9 format - ECO MODE energy-saving mode: An automatic standby circuit Hodpfxozpzy Io Amysr - Jointing unit 1802 (2 x 2.0 kW, 200 Hz, 12,000 rpm) with 2 milling units for jointing panel edges - Diamond cutter, Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation, Air Stream System (HOLZ-HER / LEUCO Patent) - Diamond cutter, Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation, Air Stream System (HOLZ-HER / LEUCO Patent) - Edge feed 1901 SYNCHRO: automatic transport of coil and strip material - Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) - DW501 SPS motorized SPRINT - GM501 spray device after the printing unit with lubricant (recommended for high-gloss edges) - End trimming unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12,000 rpm) pneumatically tiltable 0/10° - Milling unit FR701: 100% repeat accuracy at the push of a button due to backlash-free mechanics - Air Stream System multi-cutter, diamond Ø 70.9 x 16 mm, Z = 2+2 - Form milling unit FF701: 100% repeat accuracy at the push of a button due to backlash-free mechanics - Diamond cutter, Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4, radius R = 2 mm, left-hand rotation with CM technology - Diamond cutter, Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4, radius R = 2 mm, right-hand rotation with CM technology - Scraper unit 1929 MOT4 incl. high-gloss package with motorized adjustment of the tracing rollers - HW reversible knives for scraper holder, R = 2.0 mm (2 pcs. required) - Flat scraper FK701 with pre- and post-sensing for removing adhesive residue - TR501 spray unit for infeed and outfeed (separating and cleaning agent) - Includes nesting shoes below with their own spray unit Location: Hesse Availability: Approx. July 2026

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Equipment and technical data: Edge banding thickness: max. 8-55 mm Edge banding with rounding unit: max. 45 mm Strip edge banding thickness: 0.4 - 8 mm Roller edge thickness: 0.4 - 3 mm Feed rate: 12 m/min Incl. rotatable control panel HF joining unit, 2-motor Hsdpfx Aew Nadgemyor Incl. quick-heating tank, interchangeable, Teflon-coated Incl. electronic positioning of the pressure rollers Incl. swiveling double miter saw unit Incl. flush trimming unit Incl. CNC-controlled chamfering, radius, and corner copying unit with nesting package Incl. radius pull blade with nesting package Incl. flat pull blade Incl. groove unit Incl. scraping unit Incl. spray unit Availability: short notice Location: Flörsheim

Condition: ready for operation (used), Year of construction: 2013, This 5-axis SCM Stefani MD HP edgebander was manufactured in 2013. It features a robust steel construction, high-frequency motors, and a "Startouch" control system with a 12" touchscreen. Capable of handling solid wood edges up to 15 mm and rolls up to 3 mm, it includes a pre-milling unit, interchangeable glue pot, and a feed speed of 25 m/min. Consider the opportunity to buy this SCM Stefani MD HP edgebander. Contact us for more information. • Machine maintained and serviced • Edge banding machine for single-sided edge application • Heavy-gauge steel construction • High-frequency motors • Protective hood over all units after the gluing station Hedex I S R Depfx Amyjr • Spacer on the rotary control panel • Panel feeding via chain feed • “Startouch” control system with 12" color touchscreen • Solution MD-HP "T-ER4S" version • Capabilities: solid wood edges up to 15 mm; edge rolls up to 3 mm • Feed speed: 25 m/min • Pre-milling unit RT-E (entry spindle with diamond cutters) • Gluing unit VC-S4 / QMS with interchangeable Teflon-coated glue pot • iGlue device • EVA pre-fusion • Motor-driven feed rollers, interchangeable (needle roller for solid wood, plastic rollers) • 3 pressure rollers, one motor-driven • Two-motor pressure units: straight and inclined • Anti-adhesive agent spray unit AAR for edge finishing • Scraper and edge scraper unit • Cloth polishing unit Additional equipment • Anti-adhesive and polishing liquids

Condition: reconditioned (used), Year of construction: 2019, machine/vehicle number: 0-261-04-6440, functionality: fully functional, Feeding and removing of workpieces: • Pressure beam with rollers • Variable feed speed 8-14 m/min • Automatic grooving fence • Glue pot QA65 Edge banding: • Multifunctional profile scraping unit with R-2 and R-1 tools • Corner rounding unit with R-2 tool Finishing of the workpiece: • Anti-adhesive and cleaning fluid • End trimming unit • Edge milling unit with R-2 and R-1 tools • Flat scraper, top-bottom polishing unit • Prepared for connection to a return system Documentation • Selected language: Polish • Documentation in machine control, in printed form Hjdpfx Ajykzdksmysr General information • Year of production: 2019 • Machine length: 5573 mm • HOMAG control - POWER TOUCH • CE mark • Processed meters: 800,000

Condition: reconditioned (used), Year of construction: 2018, machine/vehicle number: 0-261-71-2126, functionality: fully functional, Equipment: documentation/manual, Element feeding and retrieval - Clamping beam with clamping strip - Preparation for connecting a return system - Variable feed rate: 8-18 m/min - Automatically adjustable guide rail for groove, height of clamping beam, and clamping zone Edge banding - AQ65 glue pot - PUR pre-melter, 8 kg/h - Finishing of the element - Anti-adhesive and cleaning fluid - Unit for processing corners with a double profile FLEXTRIM - Cutting unit - Multifunctional unit for profiling with R-2 and R-1 tools - Edge milling unit with R-2 and R-1 tools - Flat profiling, polishing unit (top and bottom) Hodpfxsza D E Ae Amyer Documentation - Selected languages: Croatian - Format: Data carrier + paper documentation General information - Control system: HOMAG POWERTOUCH control system - CE marking: YES - Commissioning status: Pending – planned date: June 2026 - Machine length: 6075 mm - Year: 2018 - Number of processed meters: 2.5 million

Condition: used, Year of construction: 2014, Feed direction of the panel: to the right from the operator Maximum edge thickness: 3 mm Minimum workpiece thickness: 8 mm Maximum workpiece thickness: 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Feed speed: 10 m/min Jointing unit: Yes, with 2 milling units Jointing tool: Diamond cutters Diameter: 70 mm Height: 48 mm Infeed fence adjustment: manual Chopping shear up to: 3 mm Single edge feeding: possible Gluing: GlueJet Hsdjzq E Hbopfx Amyjr PU gluing: possible Cross-cut saw: Yes Combination unit for flush/bevel/radius: pneumatically adjustable Corner rounding unit: pneumatically adjustable Profile scraper: yes Flat scraper: yes Aggregate display: on the display Control type: via limit switches Operation: Control panel with buttons Transport device: No Extendable roller support: Yes Protective hood: Yes Working height or feed table height: 874 mm Weight approx.: 1400 kg Extraction diameter: 160 mm Storage location:

Condition: ready for operation (used), Year of construction: 2017, Workpiece length: 3000 mm Maximum workpiece width: max. 1300 mm (with some limitations) 2 Panel clamping devices Lower working units: Milling unit Sawing unit for grooves, in the X and Y directions, adjustable to 90° Vertical drilling bits: 36 Horizontal drilling bits X: 6 Horizontal drilling bits Y: 2 Upper working units: Milling unit Sawing unit for grooves, in the X and Y directions, adjustable to 90° Vertical drilling bits: 36 Horizontal drilling bits X: 6 Horizontal drilling bits Y: 2 Control system: powerControl PC86 powerTouch Software: woodWOP Hodszq Ab Nepfx Amyor Barcode reader system package Loading table with air cushion Crosswise belt conveyor for unloading Safety guards Multiple processing of workpieces up to 3000 mm in length Part of the upper drilling head requires maintenance.

Condition: excellent (used), BRANDT ambition 1210 edge banding machine Kdf210 Pre-milling cutters Replaceable gluing pot Edge gluing with roller Pneumatic pre-trimming guillotine Pressure rollers Hjdpfx Amszqz Rpoyjr Trimming cutters Top and bottom milling unit R1-R2 Profile cycler Flat cycler Max. workpiece height: 60 mm Max. edge band thickness (roll): 3 mm Feed rate: 11 m/min Machine length: 370 cm Connected power: approx. 9 kW Machine inspected, ready for operation.

Condition: used, The machine was in operation until the very end. Hodpfx Ajzqzvxemysr

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 Proven quick heating tank; heating time approx. 5 minutes. Safety interlock for the application roller; the roller engages only after reaching operating temperature. Centrally height-adjustable upper pressure bar. Edge feeding and roll separation pneumatically controlled. Connected load: approx. 11.5 kW, heating power 4.5 kW, frequency inverter 300 Hz, 4 kVA. HF crosscut saw unit: electrically and pneumatically controlled, motor power 0.37 kW. Saw blade diameter: 100 mm HF flush milling unit: for radius, straight and chamfer milling. Crosscutting from rolls up to 3 mm. Edgebanding and crosscutting up to 5 mm. Minimum workpiece length: 260 mm Minimum workpiece width: 90 mm Workpiece thickness: Chamfer milling from 10 mm / radius milling from 13 mm / max. 45 mm Extendable workpiece support at front. Digital position display for feed height adjustment, edge thickness, and milling. With chassis. With heated infeed ruler. Compressed air connection: 6 bar Central extraction port: 100 mm Dimensions (L x W x H): 3115 x 1230 x 1200 mm Hsdpsw Tfw Hsfx Amysr Approx. 560 kg Availability: short notice Storage location: Flörsheim

Condition: used, total height: 2,000 mm, total length: 8,400 mm, total width: 1,080 mm, Colour: Grey Weight: 3.500 kg Price: On request - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AH/335516 - Number of units [pcs]: 12 - └ 1st unit type: Spraying device - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Tools available: Yes - └ 6th unit type: Corner rounding unit - - Tools available: Yes - └ 7th unit type: Radius scraping unit - - Tools available: Yes - └ 9th unit type: Flat scraping unit - - Tools available: Yes - └ 10th unit type: Brushing unit - - Tools available: Yes Hsdpfx Aoyudwzomyor - Voltage [V]: 400 - Current consumption [A]: 68 - Fuse [A]: 68 - Transport dimensions: 8400mm x 1080mm x 2000mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Press length without side pressing device: approx. 2,300 mm Press length with side pressing device: approx. 2,100 mm Hedpszn Iwqjfx Amyor Press width, max.: approx. 1,400 mm 4 pcs. vertical pressing units, adjustable, each with 1 crank drive pressing unit, and 1 counter piece 1 pcs. horizontal pressing unit with 2 crank drive pressing units 1 pcs. counter pressure rail, fixedly mounted on the left side 1 pcs. lower support rail with crank drive