Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor
Whxo9eezz
-Motor: 2.35/3.3 kW 1420/2850 rpm at 50 Hz
-Shaft holder: Ø 30 mm
-Dimensions: 665/290/H180 mm
-Weight: 61 kg
Stationary table with support plate for edges
and trimming device
Year of construction: 2019
Ohg2d
as good as new
with magnetic base set
with suction cup set
with socket for electrical appliances
with on-off switch
with power supply cable 2,5 m
Work table dimensions 800 x 440 mm
Table height 300 mm
Weight 26,5 kg
availability: short term
Storage location: Hochheim
Return system for edgebanding machine
model OPTIMAT ZHR 01
Bty8evoemz
Total length of the set with rolls about850cm
length of the belt driven 425cm
return checked, working in good condition
Panel return adaptable to any Left edge banding machine with a length of about 8/9 meters Panel dimensions mm: 2500 x 1450 x 60 Air curtain for receiving the panel from the edge bander with pneumatic inclination Motorized belt for receiving the panel from the edgebander Air-curtain bench for the reception and eventual rotation of the panel
Btrp7rcbro
Return conveyor for elements to a single sided edge bander or any other through-going machine. The device can work independently or be synchronized with the feeding machine: in a way semi-automatic (standard) or fully automated and controlled from the level of the feeding machine (option). The innovative system of air return tables enables to work with even very long workpieces. This machine allows you to increase the efficiency of the production process, making it more effective and above all m...
FLAT SCRAPER UNIT WITH 3 TOUCHING ROLLS
Nº HOMAG: 2-012-13-0700
Injqjp2t
NEW TOUCHING ROLLS
Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor
-Motor: 2.4/3.3 kW 1720/3420 rpm at 50 Hz
-Shaft holder: Ø 30 mm
-Price: per piece
-Number: 1x available
-Dimensions: 660/290/H185 mm
Nhwuozrx
-Weight: 61 kg
LIGMATECH Optimat ZHR01
Jweimy
Design for right-hand machine
Feed synchronisation 8-25 m/min
Buffer transport length approx. 2500 mm
Belt driven length approx. 3500 mm
Rollers free running length approx. 2050 mm
Homag UNIVERSAL TRIMMING Unit for installation into edge banding or combination machines.
There are various aggregates available:
- UF 11 with 1 motor
- UF 12 with 2 motors
with or without electro-pneumatic control / jumping function.
Spezification:
- Motor power 3,5 kW
- equipped with all possible adjusting and swiveling devices
- swiveling range +/- 90
- with electro-pneumatic jumping function
- Technical documentation with spare part list, wiring diagram and operating instructions come with t...
Hebrock quick-change glue pot, hot melt black
Quick change basin incl. glue application roller and glue dosing
for Hebrock AKV 3006 DK-F / jg 2014
-Special cleaning system PU
-adhesive outlet downwards
Bjyygv797e
-plate thickness 8 to 60mm
The quick-change glue basin comes from a kitchen company that sold its edge banding machine in 2018. The company worked with 3 change basins. The basin offered for sale is hardly used and was used for gluing the special colour black.
For clarification regardin...
Rubber Pressure Roller Wheels for Edgebanders Edge Banding Machine
This rubber roller is one of the edge banding machine accessories. It is an edge conveyor roller, also called pressure roller. It is the important edgebander part, press the workpiece, work with conveyor chain pad to get edge banded.
Different edgebander manufacturers the edge band pressure wheel in different sizes and shapes.
Mainly there are smooth roller with bearing, gear roller with bearing, smooth roller with/ without cou...
MULTIPLE SCRAPER UNIT
Nº HOMAG: 1-012-01-0220
Btghjyzodn
Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor
-Motor: 3 kW 1420 rpm
-Shaft holder: Ø 30 mm
-Price: per piece
-Number: 1x available
-Dimensions: 670/290/H190 mm
-Weight: 57 kg
Guezbg
3 x DIAMAX jointing cutter DP for Homag edge banding machines.
for continuous lines Homag
Product no. 184030
(Price / piece)
the low noise of tear-free joining of melaminharz - and paper coated, HPL, foil-coated and veneered panels
Execution
symmetric and asymmetric design
left and right can be used
Axis angle arrow-toothed
spiral cutting arrangement
Beqzktr9ob
Nachschärfzone 1.5 mm
Advantages
optimal gluing of the edges
noise and investigated
Bore: 30mm diameter
Cutting width 63 mm
Flying...
Roller glue application units for edge banding machines require regular cleaning, service and maintenance. Wood chips, burned glue particles and other contaminants behind the glue roller won't allow an even and thin glue film on the roller. Hence there won't be an ideal glue application to the board. This is valid for EVA hot-melts and even more so for PUR glues.
As long as the glue application unit is still inside the machine the limited accessibility will restrict maintenance success and also...
1000 064 PERSKE milling motor KNS 21.05/2 for edge banding machine IMA type AVM/S/K/I/660/SRL20 or similar, RADIUS cutters left/right,.
Price per piece: €150,00 + VAT, In the set: €250,00 + VAT
Igsunlqas
Frequency converter from a Hebrock Euro 2000, year 1998
Smooth running
Sliding contacts and bearings in good condition
not reconditioned
Bgwcxsblon
FLAT SCRAPER UNIT WITH 3 TOUCHING ROLLS
Nº HOMAG: 2-012-03-0700
NEW TOUCHING ROLLS
Btgg0snpf0
Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor
-Motor: 3 kW 1120 rpm
-Shaft holder: Ø 30 mm
-Price: per piece
-Number: 1x available
-Dimensions: 985/290/H185 mm
Wkoirsw7b
-Weight: 68 kg
TFU140/R/25/10/055
BOOMERANG® Feedback TFU140/25/10
- Optimat -
P8fnen
Layout: 5-013-70-9920
Machine length: 5,760 mm
stop side : right
working height : 950 mm
Feed rate : 8 - 18 m/min
NOTE:
The basic machine must be mechanically and electrically prepared for the retrofitting of the return system.
Use
The BOOMERANG® return system TFU140 enables one-man operation on single sided edgebanders.
Function
Workpieces coming out of the machine are taken over by driven chain booms supported by a driven r...
We offer reconditioning / complete re-building of conveyor chains for double-sided (Homag-) machines:
• (double-sided) edge banding machines with heavy-duty version of conveyor chains.
• double end tenoners
• Combination machines
• Postforming machines
• Flooring machines
The chains are being re-built based on existing quality-tested block links. All other (wear and tear-) parts e.g. studs/pins, needle bearings, track rollers, guide bearings, seal rings, etc, will be replaced by new parts.
For ...
1000 062 PERSKE milling motor KNS 21.05 / 2 for edge banding machine IMA type AVM/S/K/I/660/SRL20 or similar Mills links/techts,.
Gvq8qo
Price per piece: €150,00 + VAT, In the set: €250,00 + VAT
ALL SPARE PARTS , MOTOR, WORKING UNITS for STEFANI - GABBIANI SQUARING AND EDGEBANDING MACHINES
Bdmgqaworm
MAIN DRIVE WITH FREQUENCE INVERTER
Brpmbufl7y
Nº HOMAG: 1-204-11-0231
Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor
-Motor: 3 kW 1720 rpm
-Shaft holder: Ø 30 mm
-Price: per piece
-Number: 1x available
-Dimensions: 910/290/H190 mm
Bm7xs3ji
-Weight: 58 kg
ALL SPARE PARTS EDGEBANDER GRIGGIO,
MANEA - STEFANI - CELASCHI
Hdrbbdt
Several units of used and fully reconditioned Homag glue application units:
- left and right hand side
Bk3mau
- QA 34 and QA 50
- with or without teflon coating (PTFE)
The stated prices serves as an approximate guideline. The price depends on the version (e.g. QA34 / QA50) or other extras like Teflon-coating. Please ask for a detailled quotation.
1000 063 PERSKE milling motor DVMS 904/2
for edge banding machine IMA type AVM/S/K/I/660/SRL20 or similar
Shaft d = 20 mm,
Price per piece: 150,00 € + tax,
Ccsnjep
in a set: 250,00 € + tax
RUBBER PLATES fur edgebander-squaring machine "STEFANI" mod. MAJOR
DIMENSIONS : 70 X 95 MM
Biixebcp2r
260 pieces available in stock
MAIN DRIVE
Brpklc8gmb
Nº HOMAG: 1-204-11-0230
Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor
Ebvahipfy
-Motor: 3 kW 1410 rpm at 50 Hz
-Shaft holder: Ø 30 mm
-Price: per piece
-Number: 1x available
-Dimensions: 660/280/H185 mm
-Weight: 52 kg
2 buffing motors
0.09 kW
Vysyzapl
400 V
50 Hz
Leimbehaeltervorderteil
Fabrik Homag
Zu Type KL 47/2
Y3m9fuhzm
1 Stueck Leimbehaeltervorderteil links
No. 2-006-09-0142
Generalueberholt durch Homag
1000 061 PERSKE milling motor VS 31.09 / 2 for edge banding machine IMA type AVM/S/K/I/660/SRL20 or similar, RADIUS cutters left/right, price per piece: €150,00 + VAT, In the set: €250,00 + VAT
Niimn
PRE-MILLING UNIT
Brd0g0qwyz
Nº HOMAG: 1-008-42-0010
Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor
Dsqvtkq
-Power: 3.7 kW 2820 rpm at 50 Hz
-Voltage: 400 volts
-Shaft holder: Ø 30 mm
-Tool
-Dimensions: 430/230/H145 mm
-Weight: 33 kg
Pair/Set nut cutter,
Reception for saw blades,
Ct8qdswg
Spindle: 30 mm,
Groove: 10 mm,
Total length: 65 mm,
Holder: 65 mm,
for saws: 2.2 mm.
MULTIPLE SCRAPER UNIT
Nº HOMAG: 1-012-01-0501
Bb0znlr
Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor
-Power: 8.0 kW 17600 rpm at 300 Hz
-Voltage: Y 400 volts
-Shaft holder: Ø 48 mm
Yqsqso
-Dimensions: 480/125/H170 mm
-Weight: 28 kg
Set of tools for edge gluing machines,
12 parts, LEITZ, LEUCO.
Bv23nwzi
KEB HOMAG COMBIVERT 4-008-39-0546 V1.1
ART-N: 12.F4.S1D-4A00
INPUT: 3 PH 380. . .480V
OUTPUT: 6.6KVA 9.5A 4.0KW2/4P 50/60HZ
Fcigq8a
SER-N: 97070361/0301282
INCLUDED FILTER
Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor
-Voltage: 400 volts
-Power: 0.18 kW 10800 rpm at 200 Hz
-Tapered mount: Ø 18 to 19 mm
-Thread right: M10
-Dimensions: 195/70/H90 mm
Vwfmg
-Weight: 2.0 kg
PERSKE milling motor type VS 31.09/2
for edge gluing machine Homag type KL 37 DS or similar.
Inhsvkp
KEB HOMAG COMBIVERT 4-008-39-0542 V1.1
ART-N: 05.F4.S1D-4A00
INPUT: 3 PH 380. . .480V
OUTPUT: 0.9KVA 1.3A 370W 2/4P 50/60HZ
2rtbg3
SER-N: 97081370/0300339
INCLUDED FILTER
Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor
-Voltage: 165 volts
Gzimgtsmk
-Power: 0.22 kW 17250 rpm at 300 Hz
-Socket: Ø 15 mm
-Thread: left
-Number: 1x motors available
-Price: per piece
-Dimensions: 200/100/H65 mm
-Weight: 1.7 kg
Geared motor Bauknecht Sky Type ZFO - GRF 0,18/4-7,
Bfhpndgt0l
for edge gluing machine Homag type KL 37 DS or similar.
KEB HOMAG COMBIVERT 4-008-39-0544 V1.1
ART-N: 09.F4.S1D-4A00
INPUT: 3 PH 380. . .480V
Bib37uwm2m
OUTPUT: 2.8KVA 4.1A 1.5KW 2/4P 50/60HZ
SER-N: 97090459/0300345
INCLUDED FILTER
Double end profiler, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor
-Power: 0.55 kW 12000 rpm at 200 Hz
-Socket: Ø 20 mm
-Number: 1x motors available
-Price: per piece
2p99t3
-Dimensions: 250/65/H140 mm
-Weight: 3.4 kg/piece
Geared motor Bauknecht Sky Type ZFO - GRF 0,18/4-7,
Bfhpkd02sb
for edge gluing machine Homag type KL 37 DS or similar.
KEB HOMAG COMBIVERT 4-008-39-0542 V1.1
ART-N: 05.F4.S1D-4A00
INPUT: 3 PH 380. . .480V
OUTPUT: 0.9KVA 1.3A 370W 2/4P 50/60HZ
SER-N: 97081425/0300339
INCLUDED FILTER
Bkwiugli
This may be of interest to you
Machineseeker becomes biggest sponsor of the 2nd Bundesliga in Germany
How to receive 100% of our e-mails
Photo gallery: the 10 strongest forklift trucks in the world
Sample sales contract for used machines in nine languages
Morlock Motors official partner of Machineseeker and Truckscout24
Sell now on Machineseeker! Over 220,000 inquiries per month
