Used Scm K 203 for sale (594)

Condition: used, Year of construction: 2012, Basic machine Olimpic K 800 "T-ERL" (47) 1 pc. BASIC EQUIPMENT: - Ribbed steel machine frame with tubular reinforcements for optimal work unit support - Pivoting control panel - Support roller conveyor with ball bushing guides along the entire machine length - Protective and sound-absorbing hood with separate doors between the gluing and finishing units - Extractor nozzles located on the sound-absorbing hood - Electrical system with lockable main switch - Emergency/stop buttons at the inlet and outlet - Inverter for electric spindles. PLATE FEED SYSTEM - Feed chain with rubber glide shoes, mounted on a 1 1/4-inch industrial chain with a high friction coefficient - The chain slides on two guides made of hardened and ground steel, one round and one flat, to guarantee straight feed and protect against lateral misalignment. --- Automatic central lubrication of the feed chain - The upper pressure beam is made of thick-walled steel construction. Complete with double rows of bearing rollers and protective device for the printing rollers - manual lifting of the printing unit with automatic working unit positioning when changing the plate thickness - mech. Digital display for checking the selected panel thickness. ORION 100 CONTROL SYSTEM. Control device complete with PLC, allows fast, easy, and error-free execution of custom processing programs (max. 60 programs). Manages the pneumatic positioning of the units, if present on the machine. (The control system does not include pneumatic positioning). - Alphanumeric keyboard and display - Function keys for quick control of the processing units - Ambient temperature range from 0 to +45° C. MAIN FUNCTIONS - Control of the processing units and automatic activation of the motors - Control and regulation of the glue pot temperature - Selection of longitudinal and transverse processing without program change - Simple and guided diagnostics for easy troubleshooting - Statistics on absolute data and individual processing: number of pieces, edge consumption, total chain feed distance - Unit of measurement selectable in mm or inches. Technical data OLIMPIC K800 T-ER L Edge thickness: 0.4 to 8 mm Max. gluing thickness of the roll edge: 3 mmFeed speed: 12/18 m/minWorking height: 8 to 60 mmMax. dimensions of the edge cut: 135 mm²Turntable diameter: 780 mmMax. oversize compared to the panel thickness: 4 (2+2) mmMin. panel width (with 210 mm min. length): 55 mmMin. panel length (with 100 mm min. width) - with strip or roll edges max. 3 mm: 140 mm - with solid wood edges: 200 mmMin. distance between consecutive panels at 11 (16) m/min: 750 (850) Standard equipment - Pre-milling unit in the infeed RT-E- Gluing station VC-800- Trimming unit KSEL- Flush trimming unit, tiltable RI/800- Rounding unit ROUND K- Scraper unit RAS-V- ½ free space for surface scraper- 1 S free space for surface scraper or Universal milling or buffing unit - 1 free space for air nozzle unit. European safety regulations (C.E. mark). 1 unit. Voltage 400 EU. 1 unit. Frequency 50 Hz. 1 unit. "Autoset" for ER2, T-ERS, and T-ERL models. 1 unit. Allows all necessary adjustments to be made from the control panel for each machining change. Includes: - time-controlled pressure unit - pneumatic and independent pivoting of the mitre saw blades (front/rear) - pneumatic remote adjustment for the RI/800 flush trimming unit. Kodpfx Afoxnlbyoijnc

Condition: good (used), Code: 0473 Brand: SCM Model: OLIMPIC K 500 T/ER-2 - Norme CE Automatic edge bander with grinding unit for wood, veneer, pvc, melamine, abs edges, for furniture, joinery, custom furnishings, panels, kitchens, bathroom furniture and various - CE Standard Features: Kedpfxsvkdtws Afijnc Min/max panel height mm 8/60 Panel height with Round group mm 10/45 Edge thickness mm 0,4/8 Roll edge thickness mm 0,4/3 Min panel width mm 55 Feed speed mt/min 11 Presser with motorized vertical adjustment Panel support shoulder Soundproof protection booth Incoming liquids Composition: Anti-adhesive unit consisting of two nozzles for spray application of the liquid - Two containers with anti-adhesive release liquid Grinding unit with 2 high-frequency motors - Diamond tools H64 MM - Diameter mm 100 F 30 h 65 - Copying kit for grinding unit Gluing unit VC 560 for edge application on panels up to 60 mm - Glue pot capacity kg 1,5 - Interchangeable pot End cutting unit - 2 independent motors each Kw 0,35 at 12000 rpm - Motor inclination from 0° to 15° - N° 2 blades diameter mm 115 - Front copiers Tilting Trimming Bevelling unit - to remove top and bottom excess edge - N° 2 motors Kw 0,55 - 12000 rpm - Inclination from 0° to 25° - Kit 2 pneumatic positions for quick change of processing from thin edges to radius edges Rounding unit with 2 motors sliding on prismatic guides - It performs both rounding and trimming of thin and thick edges - N° 2 motors each 0,55 Kw - 12000 rpm Edge Scraping unit for optimal finishing of Abs/Pvc edge complete with rotating copiers and suction hoods with chip collection box Glue Scraping unit - for removing glue residue from the bottom and top surfaces of panels Brush unit for perfect cleaning and polishing of the plastic material edge - Motor each Kw 0,25 - Brush diameter mm 150 Phon unit for Pvc/Abs edges Compressed air 7 bar Overall dimensions mm 5500 x 1150 x 1550 h Weight kg 1780

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,4 / 3 Edges thickness in strips / lippings (min/max) mm 0,4 / 8 (12)* Panels thickness (min/max) mm 8 / 60 Numerical Control "StarTouch" + "Touch 7" Feeding speed m/min 12-18 Top pressure system with rubber belt (C.N.) Spraying unit (Anti-sticking liquid) AAR In-feed fence, adjustable by N.C. "EASY SIZE PLUS" Pre-milling Unit (vertical joint trimmers) 2 x Kw Knsdpoxlqntsfx Afijc Lamps to heat the workpieces side Glueing Unit (P.U.R. Glue + Quick Melt system) "VC/800" - "VC/6" + "AirFusion AF15" Band Pressure zone (N.C. adjustment) Edge coils supporting unit - 1 Snipping (end-cutting) K/SEL Rough Trimming unit RS/K Fine Trimming unit RI / 800 (3 pos.) Multi Function Unit (Profile contour Trimming Unit) “4 EDGE” KIT Spraying Unit (for sliding liquid) Profile edge scraping unit RAS/1000 Glue scraper RCA / 2C Milling grooving unit K-100 (1 x Kw 1,8) 90° Hot Air Heater (to reactivate the color of plastic tape) Panels Return System "SAG" Mod. SPINNER 47 / 63

Condition: refurbished (used), Year of construction: 2017, EDGEBANDER WITH NUMERICAL SETTINGS WITH EDGE DRESSER (ROUTER) & ROUNDING UNIT Brand: SCM Type (Model): K 360 HP-T-ER1 Serial no.: AH/120944 Ref: 123304 Year: 2017 (Photos taken before overhaul, before functional tests & before cleaning) Kedpfx Aerx S Ipofienc MACHINING CAPACITIES : - Height of panel to be machined: 8 - 58 mm Thickness 10 to 45 mm with use of rounding tool - Length of panel to be clad: 210 to 2500 mm - Minimum width of panel to be machined: 90 to 1100 mm - Roll edge thickness: 0.4 to 3 mm without rounding max 3 mm with rounding - Strip edge thickness: max 6 mm without rounding max 3 mm with rounding - Edge width: panel thickness +2mm on each side - Drive (feed speed): 11 m/min - Workpiece spacing: 600 mm - Part protrusion from transfer chain (panel protrusion): 30 mm MACHINE COMPOSITION : - StarTouch control - Predisposition for barcode reading - Ø800 mm unwind tray - Front extension - Easy size: digital positioning of infeed guide and feed height - Non-stick spray unit - Edge straightener (RT-V) 12000 rpm - Infrared panel preheating at infeed - Gluing unit (VC-VM) with interchangeable glue container for 1 kg granules. Heating time 12 minutes Pneumatic pre-cutter Digitized positioning (pressing) with 3 rollers including 1 motorized and timed roller - Tilting butt-cutting aggregate 0-20° 12000 rpm - Digitized positionning top/bottom trimming unit with copying. Milling cutter 1/4 round 2 mm (or chamfer) 12000 rpm - R2mm rounding aggregate 12000 rpm with digitized positionn. - Scrapers R1&2 mm top/bottom with digitized positions - Straight scrapers top/bottom - Edge finishing spray device (Nebulization) OTHER FEATURES : - Grinder motors: 2x2 kW - Cutting motors: 2x 0.19kW - Up/down motor: 0.30 kW - Drive motor: 1.1 kW - Milling motor group: 2x 0.65kW - CE marking - Lockable contactor, Mushroom stops - Power supply: 380v. Three-phase 50 Hz - Pneumatic supply: 8-10 bars (max), dry air - Suction: 1x Ø100 and 5x Ø80 mm Heads: 780 m3/h Trimming 360 m3/h Scrapers 2x360m3/h Max. foreseeable footprint in running order : 10.80 x 2.40 m Transport dimensions (WxDxH) : 4.85 x 1.20 x 1.70 m Weight: 1568 kg Machine supplied with assembled tools, manual, spare parts list and drawings. On order, the machine will be overhauled and brought up to standard, with inspection and dynamic functional testing.

Condition: excellent (used), Year of construction: 2022, Used edge banding machine - OLIMPIC K 360 R - Year of manufacture: 2022 Ksdpexhc Evsfx Afisnc - Available from November 2025 - additional photos/video available

Condition: used, Year of construction: 2015, Numeric Control Startouch Control System Panel height mm. 60 Edges in PVC/Abs rolls mm. 3 Solid wood in strips mm. 6 Feed speed up to 11 m/min Working height adjustable electronically by C.N. Panel support guide with adjustment Side roller conveyor with idle wheels for panel support Anti-adhesive group Adjustable two-motor rectifier unit Reel holder plate Gluing group for EVA glue Edge pressure unit on straight profiles with adjustable pressure rollers Knodpfx Astxtzkjfijc Trimming unit with 2 motors with automatic inclination adjustment Gleaning unit electronically adjustable by C.N. Multifunction rounding unit (edner + rounder) adjustable by C.N. Edge scraper unit Glue scraper unit Oscillating brush group

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Condition: Currently still in production Equipment and technical specifications: Gluing max. 8-55 mm Knjdpfx Afjw Nadgoisc Including rotating control panel Dual-motor HF joining unit Including replaceable, Teflon-coated rapid heating tank Including electronically controlled positioning of the pressure rollers Including pivoting double cross-cut saw unit Including flush trimming unit Including application-controlled bevel, radius, and corner rounding unit with nesting package Including radius scraper with nesting package Including flat scraper Including grooving unit Including buffing unit Including spray unit Location: Hesse Availability: Upon request !Sold on behalf of customers!

Condition: used, Year of construction: 2018, functionality: fully functional, SCM Olimpic K 560 Automatic Edge Gluing, year 2018 for sale! Complectation: Chain feed speed 12/18m/min Edge thickness 0.4/3mm EVA glue Panel milling unit "RT-V" Glue application unit "VC-S4.1" Edge trimming unit "K-SEL" Edge milling unit "R-K" Edge corner rounding unit "ROUND X" Edge scraping unit RAS-K Polishing unit SP-V Technical characteristic: Conveyor speed (two speeds) m/min 12 - 18 Min / max part thickness mm 8 - 60 Thickness of glued wooden edge mm 0.4 - 6 (8mm HP composition) Thickness of glued roll edge mm 0.4 - 3 Maximum area of ​​glued roll edge mm² 135 Diameter of reel support "plate" mm 780 Maximum overlap of glued edge, relative to the part mm 2+2 Minimum distance between transported parts mm 600 Minimum length of part (when the width of the part is min. 100 mm) mm 140 Minimum length of roll edge mm 180 Minimum length of wooden edge mm 220 Minimum width of the part (when the length of the part is min. 210 mm) mm 95 (60mm opc.) Width of the extension support mm 560 Height of the worktable from the floor mm 900 Ksdpfow Sw Tkex Afienc Plate milling unit "RT-V" Max. chip removal area mm2 55 Max. milling thickness mm 3 Min. / max. thickness of the part mm 8 - 45 (60mm opc. Motor power kW 2 x 1.5 Mill diameter mm 100 Mill height mm 49 (64mm opc.) Tool rotation speed rpm 9000

Condition: used, Year of construction: 2016, functionality: fully functional, overall weight: 450 kg, type of input current: three-phase, height adjustment type: mechanical, input voltage: 400 V, – Italian production – year of production 2016 – pre-milling – DTR, CE TECHNICAL PARAMETERS: Knsdpewb Ha Tjfx Afisc – edge thickness: 0.5 - 3 mm – wooden edgeband: 0.5 - 5 mm – element height: 8 - 50 mm – minimum edgebanding length: 160 mm – minimum board width: 110 mm – feed speed: 7 m/min – pre-milling – radial cutters – edge cutting – radial scraper – straight scraper – blower for each unit – working pressure: 8 bar – working machine length: 2030 mm – transport dimensions (length/width/height): 330/80/125 cm – weight: 450 kg

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, machine/vehicle number: AH00004861, temperature: 15 °C, operating pressure: 6 bar, NEW OPTIONAL SEMI-INDUSTRIAL EDGEBANDER SEMI-INDUSTRIAL WITH SIMPLIFIED CONTROL PANEL Make: SCM Model: K360 T-ER1 Year: 2023-2024 CE AH00004861 MACHINING CAPACITIES : - Panel height: 8 - 50 mm Thickness: 10 to 45 mm with use of rounding tool - Length of panel to be clad: 210 to 2500 mm - Minimum panel width: 90 to 1100 mm - Roll edge thickness: 0.4 to 3 mm without rounding max 3 mm with rounding - Strip edge thickness: max 6 mm without rounding max 3 mm with rounding - Edge width: panel thickness +2mm on each side Knjdjttakhopfx Afioc - Drive (feed speed): 11 m/min - Workpiece spacing: 600 mm - Part protrusion from transfer chain (panel protrusion): 30 mm MACHINE COMPOSITION : - Reel table - Predisposition to receive an air-cushion table - Work table with front extension - Drive belt: chain - Non-stick spray unit - Edge straighteners (2 routers) rpm Diamond tools - Gluing unit with interchangeable tray Pneumatic pre-cutter Marouflage (pressing) with 3 rollers (1 motorized) - Chop-saw butt-cutting unit - Nesting copying top/bottom trimming unit - Rounding unit - Radius scrapers - Straight scrapers - Edge finishing spray device (Nebulization) - Textile polishing brush station - General power supply: 400v. Three-phase+N+T 50Hz Options installed on the machine : - 10.09.98 European safety standards (CE standards) - 63.05.29 Provision for an eventual air cushion plane at machine inlet - 62.15.02 "Nesting" copier kit - 62.12.03 "AAR" anti-stick group - 62.12.61 Nebulization device for edge finishing - 62.14.55 Diamond tools H=64 on grinding group - n.2 cuts - 62.15.06 "SGP-E" glue pot - Instead of the standard glue pot - 62.15.04 "RC-N" glue scraper group - 62.12.12 "SP-V" brush group Machine available : in stock

Condition: good (used), Year of construction: 1993, functionality: fully functional, SCM D 80 K double tenoning machine, year 1993, hood on the left. Knedpjw Avh Nofx Afisc Available for viewing at our premises. Machine price includes loading onto truck. Installation and commissioning at your workshop available at extra cost.

Condition: not inspected (used), Year of construction: 1997, SCM Compact 23 Moulder Description Spindle sequence bottom-right-left-top Infeed table length 2500mm Max. Working width 230mm Max. Working height 120mm Feed speed 6-12 mtr / min Kjdpfx Aewc A R Dsfionc Spindle speed 6,000 rpm 400Volt 50Hz CE (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: ready for operation (used), Technical characteristics Knedpfx Afetrihkoiec Power and Motors Voltage: 400 V Pluging: Three-phased Overall dimensions Lenght: 5250 mm Width: 1600 mm Height: 1500 mm Weight: 1600 Kg

Condition: ready for operation (used), Technical characteristics Calibration of 2 diamond tool holders Gluing with hot melt glue tray Automatic edge feeding Pressure group Tiltable end cutting Straight / chamfer / 1/4 round trimming Edge scrapers Brush Capacity : panel thickness 50 mm edge thickness roll 0.4 - 3 mm edge thickness strips 8 mm Feed 10m/min Kedpfxottrp Se Afionc Power and Motors Overall dimensions Lenght: 3700 mm

Condition: excellent (used), Wide Belt Sander for Calibration and Fine Sanding SCM Model RCS 1st Unit: Calibration Roller, Steel 2nd Unit: Combination Unit (Roller 60 Shore, sanding pad with 2 inserts – hard, soft) Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Main motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotive table height adjustment Main switch lockable 2 x emergency stop Table extension with 2 rollers, front and rear Sanding pad inserts fitted with new graphite cloth Including as-new sanding belts All documentation included Kodjxqggcepfx Afijnc Note for used machinery: • Specifications, data, and prior sale are subject to change. • Prices stated are ex works – free loaded! • The machine has been cleaned and functionality tested. • All machines are sold as seen without any rights to warranty. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Condition: used, Four-sided planer moulder SCM Sintex NTE Electronic four-side planing and profiling machine Planing width: 180 mm Planing height: 105 mm 4 spindles Spindle motor 1 + 4: 7.5 kW Spindle motor 2 + 3: 7.5 kW Spindle diameter: 35 mm Long infeed table approx. 2300 mm Spindle speed: 6000 rpm Feed speed: 6/12 m/min Electric height and width adjustment Knsdpfx Aexqf Dyjfisc Lubrication pump incl. planing tools Machine WORKSHOP TESTED and in VERY GOOD CONDITION Available ex stock Lieboch / LEASING POSSIBLE

Condition: used, Year of construction: 2011, · Working area: 2,550 x 1,067 mm · X-Y travel: 2,980 x 1,450 mm · Z-axis travel: 150 mm · Passage height: 120 mm Drilling unit F14: · Drilling head with 8 + 6 spindles · 5 individually selectable vertical spindles in X · 3 individually selectable vertical spindles in Y · 4 horizontal spindles in X (2+2) · 2 horizontal spindles in Y (1+1) · Speed: 4,000 rpm (6,000 rpm optionally available) · Power: 2.2 kW · Grid spacing: 32 mm · Drill holder: M 10 with 11 mm centering · Pneumatic feed stroke: 60 mm Grooving saw unit in X: · Integrated in drilling head · Grooving saw blade with diameter up to max. 120 mm Main milling unit: · Tool holder HSK 63F · Speed 1,500 - 24,000 rpm, infinitely variable by inverter · Motor power 6.6 kW (9 HP) from 12,000 rpm (S1) · Motor power 7.5 kW (10 HP) from 12,000 rpm (S6) · Right/left rotation · Ceramic bearings · Prepared for use with angle heads Tool changer TR10: Automatic side tool changer for 10 tools. · Number of tool stations: 10 · Max. tool diameter: 120 mm · Max. tool weight: 4.5 kg · Max. total weight of all tools: 28 kg A central extraction nozzle combines all processing units into one connection with D = 200 mm. This reduces the required extraction capacity to approx. 3,200 m³/h. Worktable TVF: The worktable is designed to guarantee maximum operator freedom of movement. The quick-release vacuum system provides maximum flexibility for precise positioning and optimal holding of workpieces. · 4 TVF supports L = 1,100 mm, infinitely adjustable in X · 12 TVF vacuum pods 120 x 120 mm, infinitely adjustable in Y · 2 stops in X (1 x left / 1 x right) · 1 stop in Y per support (a total of 4 pcs.) · The retractable reference stops are CNC-controlled Automatic central lubrication: The correct amount of lubricant is distributed via an electronic CNC control unit (X, Y, Z axes). Ksdpfxsxqd Sce Afijnc Vacuum system (base machine): · Vacuum pump: 90 m³/h · Power: 2.2 kW · Max. vacuum (at pump): 0.9 bar PROGRAMMING SYSTEM XILOG PLUS Software features: - Import of DXF files - Import of ASCII files - User interface in operator's native language Safety devices with bumpers Machine technical data: · Total connected load max.: 18 kW · Recommended fuse: 64 A · Power supply: 400 V, 50-60 Hz · Compressed air: 6-7 bar · System pressure (recommended): 8 bar · Compressed air consumption: 200 Nl/min · Central extraction nozzle diameter: 200 mm · Extraction speed: 30 m/sec · Air consumption (central extraction): 3,200 m³/h · Vacuum: 3,000 Pascal · Weight: approx. 2,500 kg Remote control of machine functions 6 TVF supports L = 1,100 mm and 18 vacuum pods 120 x 120 mm Cross laser for positioning vacuum pods Two cross lasers mounted on the aggregate carrier serve for easy positioning of the vacuum pods. Location: Supplier

Condition: used, Year of construction: 2004, total length: 3,600 mm, total width: 1,800 mm, total height: 1,750 mm, Weight: 970 kg Price: On request - Roller table length [mm]: 3200 - Table width [mm]: 1040 - Min. saw blade diameter [mm]: 300 - Max. saw blade diameter [mm]: 400 - Options: Scoring unit - Spindle speed: - └ Min. spindle speed [rpm]: 3000 - └ Max. spindle speed [rpm]: 5000 - Scoring unit: - └ Spindle speed pre-cutter [rpm]: 8500 - Year: 2004 - Documentation available: No - Serial number: AB/166667 - Voltage [V]: 400 - Current consumption [A]: 18 - Transport dimensions: 3600mm x 1800mm x 1750mm (l x w x h) - Transport weight [kg]: 970kg - Transport packages [pcs.]: 1 Knjdpfx Ajxdlxkofisc Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), SCM F520 Jointer Working width: 520 mm Four-knife cutterhead Traditional knives Knedpfx Aexp Ic Nefijc Electronic raising and lowering of the worktable Main fence adjustable up to 45° Table length: 3000 mm CE certificate DTR documentation

Condition: excellent (used), Catalogue number 7738 TECHNICAL DATA SURFACE PLANER: - shaft width 500mm - 4-knife shaft - noise-dampening comb - shaft guard - adjustable angle fence Knjdpfx Aexcx Ucefiec - table length 2200mm - longer infeed table 1180mm - both tables adjustable THICKNESSER: - max workpiece thickness on thicknesser 240mm - thicknesser shaft guard *from above: - anti-kickback fingers - toothed, swiveling infeed roller - pressure bars - cutterblock - pressure bar - smooth outfeed roller - adjustable roller in lower table - two feed speeds 7/14 m/min - main motor 5.5kW - electric brake - extraction port diameter 150mm - dimensions L/W/H 2300x950x1100mm - weight 910kg ADVANTAGES – Italian manufacture – 4-knife cutterblock – long tables – perfect condition, not repainted – used surface planer-thicknesser Net price: 21,900 PLN Net price: 5,150 EUR depending on exchange rate 4.25 EUR (Prices subject to change with higher fluctuations)

Condition: used, SCM S 630 Heavy-duty thickness planer – for joinery, carpentry Planing width 630 mm Ksdpfx Afoxp H D Seionc Planing height 300 mm 4-knife safety cutterblock, auto brake / indicator light 7.5 kW main motor Electronic thickness table adjustment Digital/LED Infinitely variable feed 6–20 m/min. Machine from training workshop in TOP CONDITION Available ex stock Lieboch

Condition: used, Year of construction: 2016, TECHNICAL DATA AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting working area mm 0 x 800/0 x 800 X axis stroke mm 750 Max. travel speed of X-Y axes m/min 25 DRILLING UNIT Vertical spindles Number 7 (4X-4Y one common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed grooving saw (direction) X Grooving saw diameter mm 100 Max. grooving saw thickness mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Grooving saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 80+80 F10L Drilling unit Includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. Diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit. Positioning of the workpiece and drive of the work unit: A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the work unit during machining. Movement in the X and Y axes takes place on THK guides with transmission to reinforced toothed rails. Movement in the Z axis is pneumatically controlled on ball-bushing guides with adjustable stop positioning. The positioning of the work units is carried out using technology and drives with DC motors. CNC CONTROL The control system was specially developed for use in drilling and milling machines. CN - 7" color screen with touchscreen function - Alphanumeric keyboard - Self-diagnosis and any error messages or malfunctions that may occur, in the operator's language Programming - Programming via the CN - Automatic optimization of drilling operations - Option of plate zero point shift - Option of saving and importing drilling programs via USB dongle - Option of importing drilling programs from CAD-CAM external software Configuration - User interface in the same language as the instruction manual Graphic representation of the unit configuration Vacuum suction cups "B-Power Vacuum suction cups with double vacuum connection, recommended for particularly porous panels (e.g. MDF light). Machine user interface software Xilog Maestro USB Hardware and software requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, 2GHz min; Multicore processor recommended - Memory capacity: 1GB min., recommended 2GB - Free disk space: 5GB - Graphic card: Compatible OpenGL (The code includes a DVD for installation and a USB key) Xilog Maestro Features Programming - Parametric, graphic programming - Assisted programming with graphic and syntax help for drilling operations - Possibility to create and save machining macros Integrated additional functions - Self-diagnosis and possible error messages or malfunctions, in the operator's language - User interface in Knsdjvvi I Ropfx Afisc

Condition: excellent (used), Catalogue No. 7713 TECHNICAL DATA - Max. working width: 240 mm - Max. working height: 130 mm - 6 spindles: 1) Lower horizontal 240 mm, 7.5 kW 2) Right vertical 130 mm, 5.5 kW 3) Left vertical 130 mm, 5.5 kW 4) Upper horizontal 240 mm, 7.5 kW 5) Upper horizontal 240 mm, 5.5 kW (spindles 4 and 5 electrically adjustable up/down) 6) Lower horizontal 240 mm, 5.5 kW - All spindles adjustable up/down, right/left - Spindle diameter: 40 mm * From above: - 8 metal, toothed infeed rollers, including 3 double rollers - 4 rubber outfeed rollers, smooth, including 2 double rollers * From below: - 3 smooth feed rollers - 3 side pressure rollers Kodpfx Aow H Aqxjfionc - Infinitely variable feed speed control via inverter - Pneumatically pressed rollers - Feed motor: 7.5 kW - Kardan shaft drive feed - Electrically adjustable planing thickness - Body lifting motor: 0.75 kW - Infeed table length: 2480 mm - Pneumatic opening/closing of the safety cover - Pneumatic table blow-off - Centralized table lubrication - Extractor port diameters: 3x120 mm, 3x150 mm - Dimensions (LxWxH): 5300 x 1700 x 1800 mm - Weight: 5000 kg ADVANTAGES - Made in Italy - 6-head configuration - For wet and dry timber - Pneumatic safety cover opening - Pneumatic table blow-off - Spindles 4 and 5 electrically adjustable - Used planer, very good condition Net price: 136,900 PLN Net price: 32,200 EUR (based on exchange rate 4.25 EUR) (Prices may change with significant fluctuations)

Condition: used, Year of construction: 2018, Startech cn MAIN FEATURES FLEXIBLE AND CUSTOMIZED PRODUCTION COMBINED WITH SPEED AND PRECISION DRILLING FROM ABOVE WITH REFERENCE TO THE TOP OF THE PLATE ALLOWS ABSOLUTELY PRECISION MACHINING NUMERICAL CONTROL WITH 7" COLOR SCREEN: SIMPLE AND INTUITIVE TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting work area mm 0 x 800/0 x 800 X-axis stroke mm 750 Max. travel speed of the X-Y axes m / min 25 DRILLING UNIT Vertical spindles number 7 (4X-4Y one of them common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed groove saw (direction) X Diameter of the groove saw mm 100 Max. thickness of the groove saw mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Speed of the groove saw rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air demand bar 6 Compressed air consumption Nl/cycle 90 Extraction demand m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 120 GENERAL CHARACTERISTICS Universal CNC drilling machine with work table with fixed gantry and movable workpiece for performing the following machining operations: - Vertical drilling on the panel surface - Horizontal drilling on all four sides of the workpiece - Groove Milling with integrated groove saw in the "X" direction. Self-supporting structure. Machine frame made of tubular steel to provide a large base for the work table. The structure is positioned on three self-leveling feet. The electrical control cabinet is integrated into the machine frame. "Easy Motion" central Bakelite support table: - an MDF sector for through-hole drilling, automatically pivoting for horizontal drilling - an infeed roller that facilitates panel loading - a rear roller conveyor that facilitates panel sliding - left and right stops - a central aligner with manual adjustment. The left and right stops are required to drill the two opposite sides of the panel horizontally in the "X" direction. Panel positioning along the X axis is achieved by means of suction cups. Unit support. This is a gantry structure made of tubular steel. The main machining unit is installed on the gantry. F10L drilling unit includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with a single drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit Positioning of the workpiece and drive of the machining unit A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the machining unit during machining. The movement in X and Y axis is carried out on THK guides with transmission on reinforced toothed Movement in Z axis is carried out pneumatically on "ball-bushing" guides with positioning on stop adjustable via the positioning of the working units is carried out via technology and drives with -CONTROL The control was specially developed for use Knodpfxovwbp Aj Afiec

Condition: excellent (used), CATALOGUE NUMBER 7618 TECHNICAL DATA - shaft width 500mm - number of knives 4pcs - max. thickness of the processed element 230mm from above: - pawls - toothed, pulling, torsional, sequential input shaft - clamps - planing shaft - clamp - smooth pulling output shaft from below: - 2 sliding rollers in the table - 5.5kW motor - manual lifting of the table - 2 types of feed speed 7.5;13m/min - diameter of the extraction nozzle 160mm - dimensions length/width/height 1100x1000x1200mm - weight 600kg ADVANTAGES - Italian production Ksdpewbdlyefx Afionc - unpainted - used thicknesser, very good condition Price net: PLN 15,900 Net price: EUR 3,740 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)