Edge banding machine

Südhof V 20

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Storage location: Nattheim Ppjdpfx Aevvkd Tjmkjt

Condition: used, Year of construction: 2024, Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard configuration, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release sequence, including electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic drilling depth extension for end-face drilling. This saves the need to adjust the drilling depth when switching from flat-face to end-face drilling (+10 mm, e.g., with dowel length 35 mm, flat-face drilling depth 14 mm, end-face drilling depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill bit changeover. - Easy pivoting of the drilling unit from 0° to 90°, assisted by gas cylinders. - 1 clamping beam movable on Y-axis with 3 pneumatic clamping cylinders, for workpieces up to max. 80 mm height. Ideal fence system consisting of: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops. - Quick-change system, easily switchable from right to left stop for mirrored drilling of shelves in carcass construction; also suitable for line boring in system 32. - Side stops and position adjustments, as well as drilling height position, via mechanical digital counters on the support table. - Side stops can be easily folded away for fastest set-up change from carcass to frame or line drilling. - Clamping arms for the clamping beam enable line boring positions up to max. 300 mm. - Optimized three-stage tool system. Includes 1 set of dowel drill bits: - 5 carbide dowel bits, Ø 8x77 mm, right Pedpfx Aexnlflemkept - 4 carbide dowel bits, Ø 8x77 mm, left Basic machine Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard version, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release, electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic extension of drilling depth for end drilling saves the need to adjust depth when switching from flat to end drilling (+10 mm, e.g. for dowel length 35 mm, flat-side depth 14 mm and end-side depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill changeover. - Easy pivoting of the drilling unit from 0° to 90°, gas spring assisted. - 1 clamping beam, Y-axis adjustable, with 3 pneumatic clamps for workpieces up to max. 80 mm high. - Ideal stop system comprising: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops, quick-change system, easily switched from right to left for mirrored shelf drilling in carcass constructions, also usable for line boring in system 32. - Side stops and adjustable positions, as well as drill height position, via mechanical digital counters on the support table. - Side stops can be folded away easily for shortest retool time from carcass to frame and line boring operations. - Clamping arms for the clamp beam suitable for line-boring positions up to max. 300 mm. - Three-stage optimized tool system. Extraction funnel, dust tested, Ø 120 mm 1 set for line boring in system.

Condition: good (used), Year of construction: 1997, functionality: fully functional, - PVC Primus, 3 mm PVC cartridge system - Edgebanding, flush sawing, flush milling, chamfer milling, radius milling - Scraper, buffing unit - Dimensions: 4700 x 1400 x 1650 mm - Weight: 1300 kg - Working dimensions: Length: 4500 mm Depth: 1020 mm Height: 1630 mm - Connection port: 140 mm Ø - Workpiece width: min. 60 mm - Feed speed: 11 m/min - 6 bar Ppedpfswv Uq Asx Amkot - 400 Volt compressed air - Edge thickness: 8 mm for strip material, 2 mm for coil material - WITHOUT pre-milling unit - Pneumatic cylinder new Shipping possible at additional cost! Due to the age of the used machine, warranty is excluded for sales to commercial customers.

Condition: used, used, good conditionmake Festotype ZA 101machine-No. 2668/SNumber of spindles 3 crosscut sawClamping height 1 x 140 mm 2 x 30 mmCrosscut saw 2,5 HPFence ruler LAS 1750 mm 1000 mm with turret stopWorkpiece clamping pneumaticSpace requirement approx. 1700 mm x 700 mm x 1400 mmPlace of storage 97447 Gerolzhofen, free loaded, unpackedDelivery in as-is condition, as inspectedwithout warranty and guarantee Ppjdpsvwffzsfx Amkst

Condition: used, mileage: 930,000 km, power: 353 kW (479.95 HP), first registration: 02/2012, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: blue, gearing type: automatic, emission class: euro5, loading space length: 4,900 mm, loading space width: 2,420 mm, loading space height: 900 mm, Equipment: air conditioning, * MAN TGS 26.480 three-way tipper * First registration: 2012 * 930,000 km * Euro 5 * Automatic transmission * Leaf-air suspension * 6x4 axle drive * Tow bar with hydraulics * Automatic climate control Pjdpfx Aoyq A Hgsmkopt * Unladen weight: 11,460 kg * Wheelbase: 3.30 m * Body dimensions: 4.90x2.42x0.90 m

Condition: excellent (used), Horizon BQ-270 with only 436,453 books on the counter Specifications Maximum paper length: 320 cm Maximum paper width: 310 cm Minimum paper length: 135 cm Minimum paper width: 115 cm Number of clamps: 1 Speed (books per hour): 500 Ppsdpfoygx T Ijx Amkot ----- Length x Width x Height: 2,720.0 × 910.0 × 1,545.0 mm Weight: 900 kg

Condition: used, 3.7 kW motor Table length 260 cm Working width 100 cm Ppsdpfxoulg Szj Amkjt With a cutter

Condition: like new (used), Code: 0609 Podpfx Amed I H Rcekspt Brand: OMAS Model: 120/3 Milling cutter for joints Diameter 120 mm Height 30 mm Hole 40 mm

Condition: refurbished (used), MULTIBLADE A.COSTA LEOPARD Ppedpfswwipisx Amkjt 2X55KW FULL RECONDITIONED

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, he Horizon BQ-270 is a fully automated, single-clamp perfect binder designed for short-run production, with a maximum speed of 500 cycles per hour and a book thickness range of 1 to 50 mm. Year 2006 General Specifications Binding Method: Binding with milling, binding without milling, and pad binding. Clamps: 1. Production Speed: Up to 500 cycles/hr. Automation: Features fully automated setup via an icon-based touchscreen, which can store up to 20 jobs in memory. Milling Depth: Maximum of 3 mm (0.12"). Glue Type: Uses hot-melt (EVA) spine glue unit with side gluing discs Warm-up Time: Approximately 40 minutes. Ppodpfx Aox Srg Hsmket Book and Cover Dimensions Dimension Metric Imperial Max Book Size (Spine x Fore-edge) 320 x 320 mm 12.6" x 12.6" Min Book Size (Spine x Fore-edge) 135 x 105 mm 5.4" x 4.2" Book Thickness 1 to 50 mm 0.04" to 2" Max Cover Size (Top-Bottom x Fore-edge) 320 x 660 mm 12.6" x 26" Min Cover Size (Top-Bottom x Fore-edge) 135 x 230 mm 5.4" x 9.1" Cover Weight Range 82 to 302 gsm Cover Pile Height Max 70 mm 2.7" Physical and Power Requirements Machine Dimensions (W x D x H): 2,300 x 860 x 1,250 mm (90.6" x 33.9" x 49.2") Machine Weight: Approximately 900 kg (1,984.5 lb). Power Consumption: Ranges from 2.7 kW Voltage/Frequency: 3-Phase power, with common configurations including 200V, 220V, or 400V at 50/60 Hz.