Used eccentric presses single column 25-54t for sale (75)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, operating hours: 200 h, power: 7.5 kW (10.20 HP), pressing force: 60 t, stroke length: 365 mm, operating speed: 54 mm/s, Equipment: CE marking, documentation/manual, safety light barrier, The machine is almost unused. Includes a Coil Tech unwinding system. 4. Technical Specifications Maximum pressing force t 60 Table-to-ram distance mm 365 Ram stroke mm 4 - 102 Number of strokes per minute 54 Die opening diameter mm 40 Table overhang (from the center of the ram) mm 245 Ram adjustment mm 95 Ram surface dimensions mm 425 x 250 Table dimensions mm 750 x 500 Table opening dimensions mm 170 Supporting table with T-slot strength mm 70 Distance between frame side walls in the working area mm 430 Cjdpfjzw Rpzex Aiiohd Distance between anchor bolts (depth) mm 900 Distance between anchor bolts (width) mm 695 Machine dimensions: height mm 2270 depth mm 1850 width mm 1100 Weight kg 3640 Motor power kW 7.5 Motor speed rpm 1450 Direct sale to end-users only. W-Technology s.r.o. Polní 8 79201 Bruntál Czech Republic

Condition: repair required (used), machine/vehicle number: 8511147, functionality: limited functionality, operating hours: 26,172 h, input voltage: 380 V, type of input current: AC, pressing force: 35 t, stroke length: 90 mm, table width: 440 mm, table length: 640 mm, ram plate width: 210 mm, ram plate length: 310 mm, Cerini Presse TV 35 in need of repair. The clutch is working, but the brake pads need to be replaced, and the electrical cabinet needs to be reattached. The year of manufacture is unfortunately unknown, but likely around 1990. Cjdpfj Ahhx Rox Aiishd

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, power: 3.2 kW (4.35 HP), input voltage: 380 V, input current: 6 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 40 t, stroke length: 100 mm, table width: 450 mm, table length: 600 mm, throat depth: 200 mm, ram plate width: 400 mm, ram plate length: 260 mm, clearance between the columns: 260 mm, overall weight: 2,600 kg, Equipment: CE marking, safety light barrier, 2001 Presse Ross 40V-4 40 ton mechanical press with Brankamp Prokos PK550/3 monitoring, Soprem powered decoiler and safety guarding. Manufacturer: Presse Ross Model: 40V-4 Machine Type: Mechanical Press Year: 2001 Condition: Very Good Includes: Brankamp Prokos PK550/3 Process Monitoring Control Soprem RMI 50 F1 Powered Auto/Manual Decoiler Interlocked safety guards Separate control panel with two hand control Machine Description Used 2001 Presse Ross Type 40V-4 40 tonne mechanical eccentric power press, complete with Brankamp Prokos PK550/3 process monitoring control, Soprem RMI 50 F1 powered automatic/manual decoiler, interlocked perimeter safety guarding and separate control panel with two-hand operation. This Italian-built Presse Ross 40V-4 mechanical stamping press has a nominal pressing capacity of 400 kN / 40 tonnes, an adjustable 7–100 mm ram stroke and variable operating speed of approximately 68–203 strokes per minute. The included Brankamp Prokos PK550/3 process monitoring system is designed for monitoring press-production parameters and identifying abnormal process conditions. Brankamp/Prokos systems of this type monitor manufacturing process signals such as pressing/forming forces and can be used to identify deviations during production. Technical Specification Manufacturer: Presse Ross Model / Type: 40V-4 Year: 2001 Serial Number: 02-0297 Press Type: Mechanical eccentric / flywheel press Nominal Press Force: 400 kN / approx. 40 tonnes Ram / Slide Guides: 4 Adjustable Stroke: 7–100 mm Ram / Slide Adjustment: 60 mm Maximum Shut / Closed Die Height: 275 mm Variable Stroke Rate: Approx. 68–203 strokes/min Codpfxjz Irbqo Aiijhd Nominal Speed: 150 strokes/min Throat Depth: Approx. 200 mm Frame Opening / Passage: Approx. 260 mm Table Size: 600 × 450 mm Table Thickness: Approx. 55 mm Table Opening: Approx. 120 mm Ram / Slide Surface: 400 × 260 mm Tool Shank / Ram Bore: 50 mm Motor Power: 3.2 kW Motor Speed: 2,000 rpm Electrical Supply: 380 V / 50 Hz Maximum Flywheel Speed: Approx. 203 rpm Compressed Air Supply: Approx. 0.5–0.7 MPa Machine Weight: Approx. 2,600 kg Included Equipment Brankamp Prokos PK550/3 Process Monitoring Control Process monitoring equipment for monitoring press operation and production parameters, useful for detecting process deviations and helping protect tooling and production quality. Soprem RMI 50 F1 Powered Decoiler – 1992 Powered coil decoiler with automatic/manual operation, suitable for supplying strip material to the press for coil-fed production. Safety Equipment Interlocked safety guarding Separate operator control panel Two-hand press control Guard interlocking Emergency-stop controls Machine Highlights 40 tonne / 400 kN capacity Variable-speed mechanical press 7–100 mm adjustable stroke Up to approximately 203 strokes/min 600 × 450 mm bolster/table Brankamp Prokos PK550/3 process monitoring Soprem powered automatic/manual decoiler included Interlocked safety guarding Separate two-hand control station Italian-manufactured Presse Ross press Condition Used machine. Please contact us for further information, photographs, availability, inspection arrangements and pricing. Please Note: All specifications, dimensions, capacities and descriptions are approximate and provided in good faith. Prospective purchasers should independently verify all important specifications and machine suitability before purchase.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, power: 3.2 kW (4.35 HP), input voltage: 380 V, input current: 6 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 40 t, stroke length: 100 mm, table width: 450 mm, table length: 600 mm, throat depth: 200 mm, ram plate width: 400 mm, ram plate length: 260 mm, clearance between the columns: 260 mm, overall weight: 2,600 kg, Equipment: CE marking, safety light barrier, 2000 Presse Ross 40V-4 40 ton mechanical press with Brankamp Prokos PK550/3 monitoring, OBRU powered decoiler and safety guarding. Manufacturer: Presse Ross Model: 40V-4 Machine Type: Mechanical Press Year: 2000 Condition: Very Good Includes: Brankamp Prokos PK550/3 Process Monitoring Control OBRU Powered Decoiler Interlocked safety guards Separate control panel with two hand control Machine Description Used 2001 Presse Ross Type 40V-4 40 tonne mechanical eccentric power press, complete with Brankamp Prokos PK550/3 process monitoring control, OBRU powered decoiler, interlocked perimeter safety guarding and separate control panel with two-hand operation. This Italian-built Presse Ross 40V-4 mechanical stamping press has a nominal pressing capacity of 400 kN / 40 tonnes, an adjustable 7–100 mm ram stroke and variable operating speed of approximately 68–203 strokes per minute. The included Brankamp Prokos PK550/3 process monitoring system is designed for monitoring press-production parameters and identifying abnormal process conditions. Brankamp/Prokos systems of this type monitor manufacturing process signals such as pressing/forming forces and can be used to identify deviations during production. Technical Specification Cedpfsz It Dmjx Aiijhd Manufacturer: Presse Ross Model / Type: 40V-4 Year: 2001 Serial Number: 02-0297 Press Type: Mechanical eccentric / flywheel press Nominal Press Force: 400 kN / approx. 40 tonnes Ram / Slide Guides: 4 Adjustable Stroke: 7–100 mm Ram / Slide Adjustment: 60 mm Maximum Shut / Closed Die Height: 275 mm Variable Stroke Rate: Approx. 68–203 strokes/min Nominal Speed: 150 strokes/min Throat Depth: Approx. 200 mm Frame Opening / Passage: Approx. 260 mm Table Size: 600 × 450 mm Table Thickness: Approx. 55 mm Table Opening: Approx. 120 mm Ram / Slide Surface: 400 × 260 mm Tool Shank / Ram Bore: 50 mm Motor Power: 3.2 kW Motor Speed: 2,000 rpm Electrical Supply: 380 V / 50 Hz Maximum Flywheel Speed: Approx. 203 rpm Compressed Air Supply: Approx. 0.5–0.7 MPa Machine Weight: Approx. 2,600 kg Included Equipment Brankamp Prokos PK550/3 Process Monitoring Control Process monitoring equipment for monitoring press operation and production parameters, useful for detecting process deviations and helping protect tooling and production quality. OBRU SAH 1M Powered Decoiler The machine is supplied with an OBRU SAH 1M powered / motorised decoiler, suitable for unwinding coil strip for feeding into the press. Safety Equipment Interlocked safety guarding Separate operator control panel Two-hand press control Guard interlocking Emergency-stop controls Machine Highlights 40 tonne / 400 kN capacity Variable-speed mechanical press 7–100 mm adjustable stroke Up to approximately 203 strokes/min 600 × 450 mm bolster/table Brankamp Prokos PK550/3 process monitoring OBRU powered decoiler included Interlocked safety guarding Separate two-hand control station Italian-manufactured Presse Ross press Condition Used machine. Please contact us for further information, photographs, availability, inspection arrangements and pricing. Please Note: All specifications, dimensions, capacities and descriptions are approximate and provided in good faith. Prospective purchasers should independently verify all important specifications and machine suitability before purchase.

Condition: excellent (used), Year of construction: 2002, power: 3.2 kW (4.35 HP), pressing force: 40 t, overall weight: 2,600 kg, 2000 Presse Ross 40V-4, 40-ton mechanical press Manufacturer: Presse Ross Model: 40V-4 Machine type: Mechanical press Year: 2002 Condition: Very good. Requires servicing/adjustment as it has been idle for a few years. No process control. Two-hand control Machine description: Used Presse Ross model 40V-4, a 40-ton mechanical eccentric press, manufactured in 2002. This Italian-made Presse Ross 40V-4 mechanical stamping press has a nominal pressing force of 400 kN / 40 tons, an adjustable stroke length of 7–100 mm, and a variable operating speed of approximately 68–203 strokes per minute. Technical specifications: Manufacturer: Presse Ross Model/Type: 40V-4 Year: 2002 Serial number: 02-0313 Press type: Mechanical eccentric / flywheel-driven press Nominal pressing force: 400 kN / approx. 40 tons Adjustable stroke length: 7–100 mm Ram/slide adjustment: 60 mm Maximum closing/mold height: 275 mm Variable stroke speed: Approx. 68–203 strokes/min Nominal speed: 150 strokes/min Working area depth: Approx. 200 mm Frame opening/passage: Approx. 260 mm Table size: 600 × 450 mm Table thickness: Approx. 55 mm Ram/slide surface area: 400 × 260 mm Tool shank / ram diameter: 50 mm Motor power: 3.2 kW Motor speed: 2,000 rpm Electrical supply: 380 V / 50 Hz Maximum flywheel speed: Approx. 203 rpm Compressed air supply: Approx. 0.5–0.7 MPa Machine weight: Approx. 2,600 kg Two-hand control of the press Chjdpjz Sqx Rsfx Aiisd Condition: Used machine. Functioned perfectly but has been idle for a few years. Requires service/adjustment. Please contact us for further information, photographs, availability, inspection possibilities, and prices. Note: All specifications, dimensions, capacities, and descriptions are approximate and provided in good faith. Potential buyers should independently verify all key specifications and the machine's suitability before purchase.

Condition: used, Year of construction: 1997, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Performance data Pressure: 40 t Stroke: 280 mm Ram stroke: 8–120 mm Stroke rate: 120 strokes/min Throat: 350 mm Installation height: 270 mm Table and ram Table size: 710 × 565 mm Ram area: 500 × 280 mm Drive Total power requirement: 2.2 kW Machine data Machine weight: approx. 3.2 t Cedpo Aa Afdsfx Aiijhd EQUIPMENT No information available regarding accessories.

Condition: good (used), Year of construction: 1981, functionality: fully functional, power: 4 kW (5.44 HP), pressing force: 40 t, table width: 660 mm, table length: 530 mm, total length: 15,850 mm, total width: 12,450 mm, total height: 23,700 mm, overall weight: 4,500 kg, ram adjustment: 80 mm, stroke adjustment: 95 mm, LEN 40C Eccentric Press. Year of manufacture: 1981 (SMERAL TRNAVA Czech Republic). Technical data: - pressing force: 40 tons - number of strokes in the machine: 70/142 min - number of strokes manual operation: 50 min - slider stroke adjustment: 8-95 mm - slider stroke: 80 mm Chodpfxetzwt Uj Aiijd - table surface: 660 x 530 mm - slider surface: 400 x 250 mm - extension: 265 mm - engine power: 3 / 4 kW - press dimensions: 1585 x 1245 x 2370 mm - weight: 4500 kg The technical condition of the machine is good. It is possible to inspect and check the machine in motion.

Condition: used, Year of construction: 1972, pressure 40 t throat 220 mm stroke 8-88 mm stroke - stepless adjustable 30-140 mm Chsdpsztfz Refx Aiijd ram adjustment 63 mm weight of the machine ca. 2600 t

Condition: used, total length: 1,250 mm, total width: 1,250 mm, total height: 2,400 mm, Year of manufacture: 1988 Colour: Blue Empty weight: 3.000 kg Price: On request - Year: 1988 - Documentation available: No - CE certificate present: No - Serial number: 4441 - Drive system: Conventional - Press model: C-Frame press - Press configuration: Single-acting - Press force [ton]: 50 - Min. stroke [mm]: 0 - Max. stroke [mm]: 85 - Table length [mm]: 440 - Table width [mm]: 700 - Table bore diameter [mm]: 270 - Ram width [mm]: 300 - Max. opening height [mm]: 360 - Height adjustment [mm]: 70 - Pressing speed [mm/s]: 145 - Transport dimensions: 1250mm x 1250mm x 2400mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Chjdpfxoz Avbto Aiisd Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1953, machine/vehicle number: 66/53, pressure:36 t throat:280 mm stroke:6 - 82 mm ram adjustment:51 - 13 mm no. of strokes:6-82 Hub/min table surface area:530 x 480 mm Hole in clamping plate:Ø 140 mm clamping plate thickness:70 mm ram surface:200 x 200 mm clamping plate:530 x 450 mm dimensions of the machine ca.:1,0 x 1,65 x 1,80 m Chjde Ad Sh Nspfx Aiiod flywheel machine with DITTMER type PSK 103/B built in 1978, additional clamping plate 530 x 450 mm (thickness 70 mm), manual central lubrication, height-adjustable table (+/- 180 mm)

Condition: good (used), Year of construction: 1998, power: 3 kW (4.08 HP), pressing force: 50 t, table width: 800 mm, table length: 500 mm, table height: 830 mm, throat depth: 250 mm, total length: 1,300 mm, total width: 1,100 mm, total height: 2,400 mm, overall weight: 4,100 kg, compressed air connection: 6 bar, drop-through hole in table: 170 mm, installation height: 450 mm, ram adjustment: 180 mm, stroke adjustment: 102 mm, Eccentric press, pressing force 50 t, table size 800 x 500 mm, throat depth 250 mm, adjustable stroke 8 - 110 mm, 60 strokes/min, ram adjustment 180 mm, motor 3 kW, dimensions 1100x1300x2400 mm, weight approx. 4100 kg Chedpfeyly Evjx Aiisd

Condition: good (used), functionality: fully functional, Eccentric press LEN 40C. Chodpfx Aj Afbvfeiijd

Condition: good (used), functionality: fully functional, Eccentric press LEN 25 C – a total of 6 units for sale Cedps Aayctefx Aiiehd Eccentric press LEN 10 C Eccentric press LEN 40 C Eccentric press LEN 63 C Eccentric press LE 160

Condition: used, Raskin Mechanical Eccentric Press – Approx. 35 Tonnes Used Raskin mechanical eccentric press with a C-frame design, flywheel drive, and ribbed worktable. Suitable for metalworking workshops and small-scale production, including punching, stamping, forming, and other light press operations with appropriate tooling. Technical specifications: Manufacturer: Raskin Type: Mechanical eccentric press Frame: C-frame Estimated pressing force: approx. 35 tonnes (unverified) Overall dimensions: approx. 1000 × 900 × 1900 mm Condition: Used Quantity: 1 unit Reference number: 46126-35825 Condition and additional information: The machine is offered in used condition, as shown in the photographs. The pressing force and dimensions are based on preliminary information and have not been independently verified. Cedpfx As Aa Arwsiishd The mechanical system, electrical components, and safety equipment should be inspected before operation. Operating condition has not been verified. Tooling and other equipment visible nearby are not included in the sale. The press is available for inspection in Gātciems, Latvia, LV-2105. Please contact us for further information or to arrange an inspection.

Condition: excellent (used), Eccentric press Inv. No. 3945 Manufacturer: Ter Hart Codpfx Aio Af Uuxeishd Type: EP 25 * Pressing force: 25 tons * Stroke adjustment: 6 - 60 mm * Adjustable ram: 35 mm * Table dimensions: 330 x 230 mm * Installation height: 275 mm * Overhang: 180 mm * Foot pedal operation * Weight: 750 kg

Condition: used, Year of construction: 1962, pressure 025 t throat 200 mm stroke 8 - 80 mm no. of strokes 180 /min distance table/ram, max. stroke up, adjustment up 330 mm table surface area 550 x 400 mm hole in the table 60 mm table height over floor 800 mm Codpfx Aiszrprqeiohd passage to the back 200 mm ram surface 355 x 220 mm ram adjustment 50 mm power requirement 2,7 kW weight 2,5 t dimensions (WxDxH) 1,2 x 1,8 x 2,4 m permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with motor, pneumatic clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, inclineable, manual central lubrication, two-hand and foot operation

Condition: used, Year of construction: 1974, pressure 075 t throat 380 mm stroke 16- 140 mm number of strokes - idle run 105 /min shut height (stroke down, adjustm. up) 260 mm ram adjustment 80 mm table surface area 750 x 640 mm ram surface 500 x 200 mm hole in the table 150 mm table height over floor 800 - 920 mm total power requirement 7 kW weight of the machine ca. 4 t dimensions of the machine ca. 1,7 x 0,85 x 2,4 m Csdpfoz N Hu Nex Aiishd Machine has an adjustable table and air operated clutch and brake.

Condition: good (used), Year of construction: 2012, Condition: 2012 overhauled to the latest UVV Installation height: 800 mm Ram stroke: 500 mm Projection: 360 mm Nominal force: 400 kN Hydraulic pressure: 160 bar Operating hours: 1356 Other: new control from Pilz, electrical circuit diagrams available Cedpfx Aiezvnfdjijhd Video about functionality available

Condition: new, Year of construction: 2025, neu Chodpfx Asxcg D Seiijd 2025 070145 prompt, Zwischenverkauf v Türkei 44500 € 849.95 € 1 40 to 4 mm 630 mm 450 mm 160 mm 3 - 75 mm 154 1/min 420 x 275 mm 8 75 mm 40 mm 230 mm 293 mm 4 kW 1174 mm 1540 mm 2200 mm 2850 kg 8-fold ram guide 2-hand control panel and foot pedal Automatic central lubrication Front light guard Vibration pads User Manual in German with CE Declaration of Conformity

Condition: used, Year of construction: 1969, Technical details: pressure: 40 t throat: 220 mm stroke: 10 - 120 mm ram adjustment: 63 mm no. of strokes: 160 Hub/min distance table/ram: 300 mm Table dimensions: LxB: 440 x 620 mm passage opening in table: Ø 200 mm surface area of ram: 400 x 250 mm weight of the machine ca.: 2,52 t dimension machine xH: 1,5 x 1,2 x 1,3 m There is a clamping plate on the table: LxW: 440 x 620 with center hole Ø 100mm. A steel plate 380 x 325 x 27mm is mounted on the ram. The press is equipped with 2-hand control. Codpfx Asu Nfkxsiishd *

Condition: used, Year of construction: 2000, functionality: fully functional, power: 4 kW (5.44 HP), pressing force: 400 t, stroke length: 75 mm, overall weight: 2,000 kg, MIOS T40 with adjustable speed and with pneumatic feeder. Csdpez Dg S Ajfx Aiiehd

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, pressing force: 45 t, table width: 810 mm, table height: 360 mm, Manufacturer: AIDA Type: NC1-45 Pressure: 45t Year of manufacture: 1987.08. Stroke length: 80mm Chodju Dkc Aepfx Aiiod Distance above table:: (adjustable) 240-300mm Table size: 810x360 Bear size: 410x340 Electrical power: 3x200V(!!), 5.5kW - Japanese standard Net weight: 3300kg Size: 980x1480x2275mm

Condition: used, Year of construction: 1989, pressure 25 t throat 190 mm stroke 8 - 80 mm no. of strokes 120 Hub/min ram adjustment 45 mm table surface area 550 x 370 mm Cjdpfxsz Rqnpe Aiijhd hole in the table 200 x 155 mm table height over floor 660 mm ram surface 280 x 160 mm total power requirement 1,5 kW weight of the machine ca. 1,9 t - Ortlinghaus hydraulically operated clutch with dual brake - fixed table Machine is partially overhauled in-house

Condition: used, Single-column eccentric press HELMERDING Type EH 25 B Machine No. 5917 Year of manufacture: 1993 Pressing force: 25 tons Throat depth: 180 mm Cjdpfjyath Tsx Aiijhd Table area: 560 x 360 mm Ram area: 315 x 150 mm Table through-hole: 150 x 100 mm Stroke adjustment: 8 - 82 mm Ram adjustment travel: 60 mm Installation height max.: 330 mm Clamping pin bore: Ø 40 mm Strokes per minute: 145 Table height adjustment: 150 mm Table height above floor: 630 - 780 mm Motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - Hydraulic clutch-brake combination, manufacturer: ORTLINGHAUS - Electric foot switch and two-hand control - Automatic central lubrication by BEKA lubrication system - Electrical cabinet with 2-channel contactor control - Press table height-adjustable via 2 threaded spindles - UVV [accident prevention regulations] according to VBG 7n 5.1 for manual loading operations - Electrical diagram Space requirements (L x W x H): 1600 x 1100 x 1900 mm Weight: 2 tons Good condition

Condition: new, Year of construction: 2026, neu 2026 070125 prompt, Zwischenverkauf v Türkei 40200 € 767.82 € 1 40 to 2.5 mm 450 mm 650 mm 150 mm 1 - 80 mm 125 1/min 4 75 mm 40 mm 225 mm 300 mm 835 mm 4 kW 1350 mm 1370 mm 2330 mm 2100 kg Welded steel frame construction 4-fold ram guide Pneumatic clutch-brake combination Protective enclosure with light barriers and side doors Mechanical overload protection Two-hand and foot pedal operation Manual stroke adjustment Manual rammer adjustment Variable stroke rate via frequency converter Operating modes: * Adjustment mode * Two-hand release * Foot release * 2-stroke operation via light barriers * Continuous operation Touchscreen for * Stroke counter with preselection for continuous operation * Stroke rate adjustment * Lubrication intervals and duration * Alarm messages * Motor direction of rotation * Monitoring of inputs and outputs 2 free cams for connecting peripherals Automatic central lubrication Equipment in accordance with CE regulations OPTION: Vibration pads € 192,-- Bolster plate € 830,-- Cjdowiqvzjpfx Aiiohd