Used Hydraulic Folding Machines for sale (74,175)

Condition: new, Year of construction: 2026, Conventional, NC- or CNC-controlled hydraulic press brake / folding machine Maximum bending length: 2,500 mm Maximum bending capacity: - Steel sheet DC01-A with a tensile strength of approx. 350 N/mm² or material S235JR – 4 mm - Stainless steel sheet 304L – 2.5 mm - Aluminum sheet H24, tensile strength approx. 145 N/mm² – 5.5 mm Hodpfoy Stwaex Ag Ujn - Zinc sheet according to DIN EN988, tensile strength approx. 190 N/mm² – 4.5 mm Upper beam stroke up to 110 mm Maximum bending angle: 135° Various back gauge options available: - Manual back gauge with 650 mm travel - NC-controlled back gauge with brush table or - NC-controlled back gauge with sheet supports and ball rollers Each with an adjustment range up to 1,470 mm Drive power: 5.5 kW Dimensions without back gauge: approx. 3.5 x 1.7 m x height 1.7 m Weight without oil filling: approx. 4,300 kg

Condition: excellent (used), Year of construction: 2002, *📋 MACHINE DESCRIPTION* - *Make / Model*: GEKA PUMA 80/E-500 - *Year*: `To be completed` - CE marking, first-hand machine - *Condition*: Very good working condition. Original paint with normal signs of wear. Stored in a dry place. - *Power*: 80 Tons - *Gooseneck*: 500 mm deep - *Motor*: 7.5 kW - Three-phase 400V - 50 Hz *⚙️ TECHNICAL SPECIFICATIONS* Hedpfey U U R Tex Ag Ujn 1. *Punching station*: Ø 28 mm in 20 mm thickness / Ø 40 mm in 14 mm 2. *Flat bar shear*: 300 x 20 mm 3. *Angle shear*: 120 x 120 x 12 mm at 90° 4. *Nibbler*: Included and mounted on the machine 5. *Round/square bar cutting*: Ø 45 mm / Square 40 mm *✅ INCLUDED EQUIPMENT* - Foot pedal control + manual levers - Emergency stop + lockable isolator switch - 1 set of punch/die mounted on the machine `Specify Ø` - Electrical cabinet with diagram - CE protective guard

Condition: good (used), Internal article no.: 24080 Hydraulic machine vice Manufacturer: Hilma Jaw width: 200mm Hjdpfxouxbwge Ag Uon Max. clamping width: approx. 340mm Dimensions (LxWxH): 70x30x17cm Weight: approx. 120Kg

Condition: new, The SB E 2060/2 is a robust Manual Folding Machine from KNUTH, designed to meet the demands of the Folding Machines category in the Manual Folding Machines group. With its sturdy cast-iron construction, this machine efficiently handles bending operations for large plates up to 2000 mm in length and a maximum plate thickness of 2 mm. Featuring a long male die stroke and a one-piece male die, the SB E 2060/2 ensures precision and durability in every application. The high counterweight facilitates easy bending, making it versatile for various tasks. Additionally, it comes with an operator manual to assist users in setup and safety. For those interested in reliable and powerful performance in sheet metal processing, this machine stands out. Ready to enhance your productivity? Request a quote today for the SB E 2060/2 and experience the benefits of a robust Folding Machine. Hedpfx Agsn Tlg Is Usn

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 53600 € 1013.04 € 2050 mm 3 mm 2 mm 4 mm Motorisch 3350 mm 2200 mm 1900 mm 3800 kg 1000 mm CNC control with tabular programming Hjdpfxowiq E Ne Ag Ujn - 15,6" touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page Motorized drive (servo motors) of the upper and bending beam (Z and Y axes) Motorized back stop (X axis) with servo drive, 1000 mm, rectangular configuration, with ball rollers in the sheet metal inserts Upper beam opening 220 mm (without tools) Manual bending beam adjustment 35 mm Upper beam with 45° geometry Upper tool 20° with R1, undivided 2 pcs. Bending beam rail (7 or 10 mm, 15 or 25 mm) Front light barrier protection 3-way foot pedal Options: Secstioned goose neck upper tool Pneumatic tool clamping Sectioned lower and bending tool Servo drive for the bending beam Manual crowning system Second foot pedal Side stop Rear light barrier protection 2D or 3D graphic control PC software Special Omega geometry for lower and bending tool Conical back stop Back stop extension Vacuum holder

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 57100 € 1079.19 € 3200 mm 2 mm 1.2 mm 3 mm Motorisch 4450 mm 2200 mm Hjdpfx Agowiq A Ij Uen 1900 mm 4500 kg 1000 mm CNC control with tabular programming - 15,6" touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page Motorized drive (servo motors) of the upper and bending beam (Z and Y axes) Motorized back stop (X axis) with servo drive, 1000 mm, rectangular configuration, with ball rollers in the sheet metal inserts Upper beam opening 220 mm (without tools) Manual bending beam adjustment 35 mm Upper beam with 45° geometry Upper tool 20° with R1, undivided 2 pcs. Bending beam rail (7 or 10 mm, 15 or 25 mm) Front light barrier protection 3-way foot pedal Options: Secstioned goose neck upper tool Pneumatic tool clamping Sectioned lower and bending tool Servo drive for the bending beam Manual crowning system Second foot pedal Side stop Rear light barrier protection 2D or 3D graphic control PC software Special Omega geometry for lower and bending tool Conical back stop Back stop extension Vacuum holder

Condition: good (used), Year of construction: 2001, sheet width 2520 mm plate thickness 3.0 mm 350 mm Swing beam adjustment 80.0 mm back stop - adjustable ca. 1.000 mm Control FM 5.1 B upper clamping bar adjustment 20.0 mm/sek bending speed 37.0 Grad/sek total power requirement 4.5 kW weight ca. 3.250 kg The ideal solution for individual and series production. A modern design with particularly high rigidity. Designed for continuous performance. Features: - Dynamic, powerful electro-motorized folding machine * Upper beam bending beam drive by geared brake motor * Bending beam drive with roller bearings - FASTI CNC control "TOUCH" - FM 5.1 B * Swiveling control unit, front right * 11.3" color LCD touch screen display * Manual / automatic mode selectable * Input of actual/target values possible (X axis / angle etc.) * Program memory * Tool memory - CNC electro-motorized back gauge * with rear sheet support surface - CNC electro-motorized folding beam adjustment - 1x extra set of FASTI split scribing tools - height : 120 mm - EMERGENCY OFF button at the front, with extension cable Hjdpfx Aey Umd Seg Ujn - 1x free-moving double foot switch - 1x free-moving foot switch - original operating instructions - Smallest bending leg length in mm to sheet thickness : * 7.0 mm with 0.75 mm sheet thickness * 8.5 mm for 1.00 mm sheet thickness * 12.0 mm for 1.50 mm sheet thickness * 16.0 mm for 2.00 mm sheet thickness * 19.5 mm for 2.50 mm sheet thickness * 25.0 mm for 3.00 mm sheet thickness

Condition: used, Year of construction: 1982, Technical details: sheet width: 1500 mm plate thickness: 1,5 mm distance between columns: 1760 mm knife length: 152 mm bending angle max.: 160 ° total power requirement: 1,3 kW Weight approx.: ca. 800 kg dimension machine xH: 2,5x0,7x1,5 m - adjustment of the upper cheek 350mm Hsdpfxeu Ibzws Ag Usn - adjustment of the bending cheek / lower cheek 60/60 motoric - bending edge up to max. 10mm radius - without back gauge - upgrade possible -manual counter - foot pedal (pedal left/right) accessories: - 1 set tools *

Condition: used, Technical details: Hodpfx Ajya Eq Hsg Uen sheet width: 2004 mm plate thickness: 2,5 mm distance between columns: 2040 mm Total power requirement: 3 kW bending angle max.: 180 ° Weight approx.: 1700 kg dimension machine xH: 2,7 x 1,3 x 2,0 m

Condition: used, Technical details: plate width: 1000 mm plate thickness: 3,0 mm smallest sheet thickness: 0,5 mm distance between columns: 920 mm Number of Straightening rolls: oben 4x unten 4x Stück / pieces roll diameter: ca. 75 mm number of rollers: 2 oben und 2 unten St. weight of the machine ca.: 6,5 t dimensions L x W x H: 3,8 x 2,2 x 2,1 m This is a sheet metal straightening machine with hydraulic feed. Further features: 4 straightening top rolls Ø 75 x 830 mm, stroke 20 mm, hydraulic 4 straightening bottom rolls Ø 75 x 830 mm, fixed, hydraulic 4 pull-out rollers Ø 110 x 480 mm, 2x top adjustable approx. 20 mm and 2x bottom, hydraulic Roller support Infeed height 1400 mm Hydraulic system equipment Operated externally Recommendation: complete conveyor system (decoiler + loading device + straightener with hydraulic feed) for sale with optional stock no. 0100572. Hsdpfevgbgaox Ag Uen *

Condition: used, Technical details: plate thickness: 1 mm distance between columns: 2,255 mm bending angle max.: 130 ° total power requirement: 2,25 kW Weight approx.: 1400 kg dimension machine xH: 2,7 x 1,15 x 1,3 m Hjdpjwq I U Rjfx Ag Uon Machine without foot switch but this is pre-equipped the upper beam was converted to 60 mm adjustment by the previous owner higher is only possible when dismantling for automatic operation the foot control is missing manual operation O.K. No backgauge *

Condition: used, Year of construction: 1997, Technical details: tube diameter: 4,75 - 8,0 mm wall strength: - mm bending radius min.: unterschiedlich, various, variada mm bending angle max.: 180 ° compressed air: min 4,5 bar Total power requirement: ca. 10 kW Weight approx.: 6,0 t dimension machine xH: 6,3x3,7x2,0 m dimensions electric cabinet: 1,8x0,5x2,7 m dimension control panel: 0,85x0,68x1,65 m fully automatic numeric control for bending of hydraulic supply pipes, car brake pipes various length - various numbers of bending possible (max. 100 bendings per pipe) - 2 independent bending module, every modul has 2 NC axis with functions: " longitudinal process (axis 1 and 3) and " turning of bending head" and bending (axis 2 & 4) - program memory for 250 pipes (lines) - the feeding unit consits of manual a manually filled drum magazine (drum magazine pipe dia.=4,75mm up to dia=8,0mm with 500/1000 pcs) - load swiveling arm - control panel Bundy GHF 60134 accessories: - div. single and add-on parts Hodpfxou Ibuke Ag Uen *

Condition: used, Year of construction: 1992, Technical details: plate width: 1550 mm plate thickness: 2,5 mm distance between columns: 1630 mm knife length: 1550 mm stroke adjustment: Oberwange: 90manuell / 70hydr. mm stroke adjustment: Unterwanne/Biegewanne: 105 manuell mm stroke adjustment: Biegewage: 40 mm bending angle max.: 93 (L-/Z-biegen) und 180° Zufalten ° back gauge: nein - no total power requirement: 4,5 kW weight of the machine ca.: 1,8 t Hsdpfju Ib Anox Ag Uen dimension machine xH: 2,6 x 1,1 x 1,7 m dimensions of hydaulic: 1400 x 700 x 1480 mm This is a hydraulic swing bending machine bending capacity 2,5mm with approx. 400N/mm² strength Hydraulic OILTECH with approx. 200 liters *

Condition: used, Year of construction: 1988, Technical details: Hedpfju Ib Dfox Ag Uon plate width: 2050 mm plate thickness: 2 mm distance between columns: 2400 mm knife length: 2050 mm stroke adjustment: oben 250 mm adjustment of stroke: unten 100 mm bending angle max.: 180 ° back gauge - adjustable: mit Aufnahmeschienen mm working pressure: 5,0 MPa total power requirement: 2,2 kVA weight of the machine ca.: 2,3 t dimension machine xH: 3,5 x 1,0 x 2,2 m dimensions of hydaulic: 0,75 x 0,55 x 0,80 mm HYDRAULIC FOLDING MACHINE operation via control panel with boom as well as via foot switch bending angle: sharp bending = up to 135° with 2mm sheet metal stroke of the upper beam = 250mm stroke of the lower beam = 100mm bending jaw stroke = 100mm bending gap = 7mm with scale display *

Condition: good (used), machine/vehicle number: 304005, Horizon AFC-566FKT 6 buckle plates + cross knife + 2 buckle plates Max sheet size: 558 × 850 mm Min sheet size: 128 × 148 mm Paper weight: approx. 35–240 gsm Production speed: up to 42,000 sheets/hour Fully automatic setup Hsdpozaq Nbsfx Ag Uon Colour touchscreen control Job memory system High-pile feeder Multiple fold patterns Suitable for parallel, letter and cross folding applications 400 V / 3-phase Rated current: 5.6 A Machine information Model: Horizon AFC-566FKT Serial number: 304005 Total counter: 1,494,174 sheets Operating hours: 74,254 h Made in Japan *Technical details may vary

Condition: ready for operation (used), Year of construction: 1969, Immediately available ex location: Hydraulic Vertical Honing Machine Nagel Type VS 8 – 50 / S Year of manufacture: 1969 Honing diameter: 10 – 120 mm Honing length: 10 – 750 mm Table clamping surface: 920 x 350 mm Throat depth: 440 mm Automatic feed Complete set of honing tools, honing heads from 10 – 120 mm, honing mandrels, clamping pots Spindle drive: 4 HP Spindle rotation: 3 HP Hedpfx Ajzap T Eeg Uen Weight: 5 tons Priced at EUR 4,500.— plus VAT ex location

Condition: good (used), Year of construction: 1990, Year: 1990 Format max:550x 920mm 6 cassettes 2 electronic crosses Hjded Dikcjpfx Ag Ujn compressor Tremat New belts Instruction Perforation

Condition: used, Year of construction: 2018, functionality: fully functional, type of input current: AC, input current: 1 A, input voltage: 230 V, We are offering this used Chiossi & Cavazzuti Speedy T 2005 folding machine, manufactured in 2018, for sale. Power: 0.1 kW Phases: 1P+N+PE Current: 0.5 A Voltage: 110/230 V Frequency: 50/60 Hz Air pressure: 6 bar Weight: 90 kg Year of manufacture: 2018 Serial number: 0827 Product code: 1060006 If you have any questions or require further information, please do not hesitate to contact us. Hjdpfx Agjzai Uce Uon

Condition: new, neu ca. 12 - 14 Wochen ab Auf Deutschland 4010 mm 1.5 mm 2 mm 1.5 mm 5 5 1130 mm 180 mm 915 mm 3 kW 4550 mm 5200 mm 1435 mm 1980 mm 2700 kg 145 ° hydraulic drive standard control additional rail on the bending beam Hedpfx Ajyrhtuog Uon 2x foot pedal removeable material support safety equipment accoring to the control rules BG Germany OPTIONS AS ROTARY SHEAR, CNC CONTROL, BACKGAUGES … ON REQUEST Prices ex works Germany. Transport and commissioningat customers place on request.

Condition: new, neu ca. 12 - 14 Wochen ab Auf Deutschland 5020 mm 1.5 mm 2 mm 1.5 mm 6 6 1130 mm 180 mm 915 mm 4 kW Hodpfxoyrhthj Ag Uen 6200 mm 1435 mm 1980 mm 3200 kg 145 ° hydraulic drive standard control additional rail on the bending beam 2x foot pedal removeable material support safety equipment accoring to the control rules BG Germany OPTIONS AS ROTARY SHEAR, CNC CONTROL, BACKGAUGES … ON REQUEST Prices ex works Germany. Transport and commissioningat customers place on request.

Condition: new, neu ca. 12 - 14 Wochen ab Auf Deutschland 6200 mm 1.5 mm 2 mm 1.5 mm 7 7 1130 mm 180 mm 915 mm 4 kW 7380 mm 1435 mm 1980 mm Hedpfsyrhtbsx Ag Ujn 3700 kg 145 ° hydraulic drive standard control additional rail on the bending beam 2x foot pedal removeable material support safety equipment accoring to the control rules BG Germany OPTIONS AS ROTARY SHEAR, CNC CONTROL, BACKGAUGES … ON REQUEST Prices ex works Germany. Transport and commissioningat customers place on request.

Condition: new, neu ca. 12 - 14 Wochen ab Auf Deutschland 1 6200 mm 1.25 mm 2 mm 5 5 1130 mm 180 mm 915 mm 3 kW 7380 mm 1435 mm 1980 mm Hjdpfx Agsyrhr Rj Ujn 3200 kg 145 ° hydraulic drive standard control additional rail on the bending beam 2x foot pedal removeable material support safety equipment accoring to the control rules BG Germany OPTIONS AS ROTARY SHEAR, CNC CONTROL, BACKGAUGES … ON REQUEST Prices ex works Germany. Transport and commissioningat customers place on request.

Condition: new, neu ca. 12 - 14 Wochen ab Auf Hjdpfeyrhqajx Ag Usn Deutschland 5020 mm 1.25 mm 2 mm 1.25 mm 5 5 1130 mm 180 mm 915 mm 3 kW 6200 mm 1435 mm 1980 mm 3000 kg 145 ° hydraulic drive standard control additional rail on the bending beam 2x foot pedal removeable material support safety equipment accoring to the control rules BG Germany OPTIONS AS ROTARY SHEAR, CNC CONTROL, BACKGAUGES … ON REQUEST Prices ex works Germany. Transport and commissioningat customers place on request.

Condition: used, functionality: fully functional, Professional pipe bending machine with hydraulic drive. Suitable for steel pipes, stainless steel, and possibly thick-walled copper pipes. INCLUDES a wooden crate with a comprehensive set of bending dies/bending segments (see photo) – this is what gives it its real value, as bending segments are very expensive when purchased new. Ideal for heating engineers, plumbing companies, steel pipe construction, plant engineering, and training workshops. With the included set, various diameters can be bent directly. Technical data: - Type: hydraulic pipe bending machine, stationary unit - Drive: three-phase 400 V / hydraulic unit - Bending dies: comprehensive set available (wooden crate, see photo) - Construction: steel frame, mobile/stationary - Application area: typically pipe OD 20-60 mm (verify on-site) Hsdpfxjzab Ems Ag Uen - Year of manufacture: approx. 1980s-1990s Collection/transport: Self-collection with a forklift. Loading on-site is possible. Shipping via freight forwarder on a pallet can be arranged.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1988, working width: 3,000 mm, type of crowning: manual, sheet thickness (max.): 6 mm, total length: 2,500 mm, total width: 4,500 mm, total height: 2,500 mm, Equipment: documentation/manual, emergency stop, Hydraulic pivoting bending machine Manufacturer: KRAMER, Type: AMautVIIhy3000 Year of manufacture: 1988 Hedoy T R Swepfx Ag Ujn Technical data Manufacturer: KRAMER Type: AMautVIIhy3000 Year of manufacture: 1988 Usable length: 3030 mm Sheet thickness: 6 mm Stroke: approx. 300 mm Dimensions: approx. L x W x H 4.5 x 2.5 x 2.5 m Equipment: • Bending angle adjustment via potentiometer! • Controlled rear stop, 1000 mm • Segmented gooseneck tool • Bending rail + reinforcing rail • Manually adjustable crowning • Documentation All information without guarantee. A demonstration is possible at any time in our showroom.