Used Thermo Forming for sale (4,370)

Condition: excellent (used), Year of construction: 1992, operating hours: 41,685 h, Technical specifications: Rated power, kW: 11,3 Iisdpeq A Um Rsfx Affok Mold area, mm: 475 x 250 Max. film width, mm: 495 Min. film width, mm: 150 Max. feed length, mm: 280 Min. feed length, mm: 50 Max. drawing depth/negative, mm: 100 Number of cycles/min.-max.: 48 Consumption of air/cycle at 6 bar: 100 Nl (net-pressurized air) Heat energy to be dissipated: with top heating ca. 10 260 KJ/h with top and bottom heating ca.: 17 715 KJ/h Special equipment: Hollow floor facility available Control cabinet: included

Condition: excellent (used), Year of construction: 1999, operating hours: 80,188 h, machine/vehicle number: 322, Max. film width 700-800 mm Equipment / Additional information: -GREINER STACKING / Transfer device R3 (Ref. No.: 95002.24) // M. No.: 00020 // Age: 1998 Heating from above and below Material PS and PP were processed 450 Ps // 350 Pp Ijdpjq Nn Hcsfx Affjik The following tools were used on the machine: 8-way WZ-Ø95 and 15-way WZ-Ø73 and 15-way WZ-Ø86 Packaging was produced especially for the dairy industry. The cycles are 18-25 strokes - depending on the cup weight.

Year of construction: 1988, condition: excellent (used), machine/vehicle number: 3284, (min.) material thickness: 0.65 mm (max.) material thickness: 2 mm Technical Data: Width of film, max./min. 450/350 mm Forming area max. 430 x 160 mm Drawing depth max. negative/positive 6/20 mm (on request 22 mm negative) Top heater max. 10,15 kW Driving motors 3,0 kW Total connected load at 100 % duty cycle 12,7 kW Working air pressure 6 bar Isdpfx Afjhbu E Hofsik Air consumption (dependent on product) max. 1250 I/min Rate of water flow max. 1,0 m3/h COMPACT AND ROBUST - giving continuous high output. Easy and ergonomical operation (e.g. take- off height 1300 mm). QUICKLY CHANGEOVER - from 30° to 90° foil feed giving maximum material utilisation for both square and round lids. Heater changeover problem-free. PRECISION - The accuracy of the form table movement is guaranteed by linear guide bearings and hardened rods. The safe reliable guarantee for precision. OPTIMUM PUNCHING ACCURACY EVEN DURING MAXIMUM OUTPUT Cam controlled function sequence guarantees absolute precision with every cycle.

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 403, THERMO FORMING MACHINE TFT IMC 5030 (WITH TOOLS) Equipment / Additional information: unwinding: Roll recording: easy Max roll diameter: mm 1000 Settlement: automatically Thermoforming machine: Maximum tool dimensions: mm 520x330 Pos. Molding height max .: 15 mm Neg. Molding height max .: 120 mm Sheet width: mm 150/760 Movement Step: mm 50/330 Max HIPS film thickness: 1.8 mm Hub of the sub-table: 150 mm Clamping force: 7500 Kg Inst power top heater: 18.8 Kw Inst power under heater: 14.1 Kw Idle clock speed: per minute 40th power main drive motor: 2.2 Kw Iedpfx Afon D Ew Ijfsik Engine power. Film feed: 0.75 Kw Air operating pressure: Kg / cm2 7 Water consumption at 12 °: 1t / 1` approx.30 Air consump. at 7 kg / cm2: 1t / cycle 125 Installed power: Kw 50 9xTool: Article no. // Tool no. // Cavities // Description / Product: 3599 // 457 // 10 // Vending machine cup capacity/capacity/contenance=223ml 593 // 460 // 8 // Coffee-to-go / thermo mug / thermo cup Filling capacity / Capacity / Contenance=300ml / 12 oz 509 // 452 // 6 // Ice cream cup: filled to the brim=140ml / Filling capacity with headspace 6mm: 120 ml 591 // 459 // 10 // Thermo mug ⌀ 81/180ml 740 // - // - // Standard cup with sealing edge ⌀ 75-120ml 3589 // 458 // 12 // Coffee-to-go / thermo mug / thermo cup: Filling capacity / Capacity / Contenance=80ml 595 // 456 // 10 // Vending cup / Gobelet pour automate: Filling capacity / Capacity / Contenance=150ml 210 // - // - // Baking case / technical part / plate or tray 8000 // 455 // - // Granule cup 180 ml / technical part with flat sealing edge

Condition: new, Year of construction: 2017, operating hours: 25 h, functionality: fully functional, saw band length: 520 mm, saw band width: 580 mm, total height: 1,500 mm, total length: 5,200 mm, total width: 2,350 mm, type of input current: three-phase, overall weight: 2,500 kg, input voltage: 380 V, New machine. Iodpfx Afjunia Hefeik

Condition: used, Year of construction: 2014, Cannon/Breyer Combined extrusion thermoforming line for producing of continous 6-layer PE plate to thermoform automotive tanks Max. plate size: 1500x1600mm min. plate size to be precessed: 500 x 500mm max. plate thickness: 10mm min. plate thickness: 4,0mm Iedpfexpxfbjx Affeik max. plate weight: approx. 24kg (bei 1600x1500x10 mm) processing height: approx. 700mm max. capacity: 1.100 to 1.170 kg/h Comprising: Breyer Extrusion Line composed of - Breyer Extruder 105mm for HDPE and Master batch - Breyer Extruder 120mm for HDPE Regrind - Breyer Co-Extruder 45mm for HDPE ADMER - Breyer Co-Extruder 45mm for HDPE EVOH LDPE - Breyer Extruder 105mm for HDPE Cannon thermoforming press (7x) Kuka Industrial robots for plate supply to press, feeding of internal tank parts, unloading from press, edge trimming, loading/unloading to calibration station FDM/Piovan batch supply Vacuum supply Tempering units for tooling Condition: Good

Condition: used, Year of construction: 2017, Cannon/Breyer Combined extrusion thermoforming line for producing of continous 6-layer PE plate to thermoform automotive tanks Max. plate size: 1500x1600mm Iodpfxexpxc Te Affjik min. plate size to be precessed: 500 x 500mm max. plate thickness: 10mm min. plate thickness: 4,0mm max. plate weight: approx. 24kg (bei 1600x1500x10 mm) processing height: approx. 700mm max. capacity: 1.100 to 1.170 kg/h Comprising: Breyer Extrusion Line composed of - Breyer Extruder 105mm for HDPE and Master batch - Breyer Extruder 120mm for HDPE Regrind - Breyer Co-Extruder 45mm for HDPE ADMER - Breyer Co-Extruder 45mm for HDPE EVOH LDPE - Breyer Extruder 105mm for HDPE Cannon thermoforming press (8x) Kuka Industrial robots for plate supply to press, feeding of internal tank parts, unloading from press, edge trimming, loading/unloading to calibration station FDM/Piovan batch supply Vacuum supply Tempering units for tooling Condition: Good

Condition: excellent (used), Thermo Scientific Vötsch Type: UT 6420 For sale is a professional laboratory and industrial drying oven / heating cabinet, Thermo Scientific / Vötsch Industrietechnik – Type UT 6420. This unit is suitable for drying, heating, tempering, and heat treating materials and components at precisely controlled temperatures up to 300 °C. Typical areas of application include laboratory, industry, workshop, research, electronics, and materials testing. The stainless steel chamber ensures uniform heat distribution and is designed for continuous operation. Chamber: Stainless steel with insertion racks External dimensions (approx.): 170 × 70 × 80 cm (H × W × D) Technical specifications: Manufacturer: Thermo Scientific / Vötsch Industrietechnik Type: UT 6420 Max. temperature: 300 °C Temperature control: Electronic (Heraeus Kelvitron) Rated voltage: 3/N/PE 400 V, 50/60 Hz Rated current: 6.6 A Power consumption: approx. 4.2 kW Protection class: IP20 Weight: approx. 200–230 kg Condition: used Scope of delivery: (see photo) Iodpfx Aex Hf Uaeffjik (Specifications are subject to change and errors; details are non-binding!) For further questions, we are happy to assist you by phone.

Year of construction: 2017, condition: used, Cooling group / cooling unit Frigoblock Year of construction 2017 Iedewramuepfx Affjik Cevoman bv. Lenskensdijk 5 2200 Herentals Belgium

Condition: used, Year of construction: 1993, machine/vehicle number: 1075-14, Offer 20244 Technical data approx.: - Filling capacity approx. 250 L - Granulate feeding via suction device - Heating capacity 10 kW - Total drive power 10.5 kW Iedpfxjx Hhbvj Affoik - Temperature controller - Compressed air connection 6 - 8 bar - Mobile version - Required space W 850 x H 2350 x D 950 mm - Weight approx. 180 kg

Year of construction: 2005, condition: used, Analyzer, rheometer, viscosity meter, Modular Advanced Rheometer System Iiodpfx Ajxm U S Eeffsk -Condition: Function only as shown in the video, other functions not guaranteed -Scope of delivery: as shown in the pictures -Manufacturer: Thermo Electron Haake Mars, Modular Advanced Rheometer System -Haake Universal Controller: Thermo Electron Type Haake Universal Temperature Controller: Thermo Electron type Dimensions: 1070/450/H860 mm -Weight: 86 kg

Condition: used, This listing is for a Thermo Scientific Heratherm IMH400-S Incubator The unit is in full working condition and is ready for immediate use Overview The Heratherm IMH400‑S is part of the Heratherm Advanced Protocol Security line of microbiological/laboratory incubators. It is designed for demanding applications where both temperature performance and safety/security of samples are important. The “Security” in its name refers to added features such as a lockable door, alarms, and a high‑temperature decontamination cycle. ----- Key Specifications ParameterValue / RangeNotes / CaveatsInternal Volume / Capacity~ 381 litres (≈ 13.5 cu ft) ThermoBid+2Some listings use “400 L” as a rounded designation +1Internal External Dimensions (W × D × H)~ 778 × 770 × 1,545 mm (30.6 × 30.3 × 60.8 in) Includes casters, housing, etc. +2 Temperature RangeAmbient + 5 °C to 105 °C +3This allows use both for incubation and drying protocols Temperature Stability / Uniformity±0.2 °C (at 37 °C) typical +2ThermoBid+2Some versions report ±0.1 °C stability under ideal conditions Convection / Airflow Mechanical convection; adjustable fan speed (often 10% to 100%) Ensures even temperature distribution; users can tune speed to application needs Decontamination Cycle140 °C decontamination for ~6 hours This is to reduce contaminating microorganisms in the interior without needing to remove all fittings for autoclaving shelves included; up to ~39 positions maximum Shelves are removable; spacing adjustable Power / Electrical~1380 W consumption Common variants: 230 V, 50/60 Hz Iodoxzh H Ejpfx Affjik Weight / Mass~ 144 kg Heavy unit, so needs stable flooring and handling during installation

Condition: repair required (used), Haake HAAKE RheoStress 6000 Rotational Rheometer – Thermo Scientific Product Description: For sale is a HAAKE RheoStress 6000 rotational rheometer by Thermo Scientific – a high-precision measuring instrument for rheological characterization of a wide variety of materials. Ideally suited for use in research, development, or quality control. The device is not operational, however, as the air bearing is defective. Technical Specifications: Angular resolution: 12 nrad (internal resolution) Speed range (CR mode): 10⁻⁵ / 10⁻⁷ to 1500 / 4500 rpm Speed range (CS mode): 10⁻⁷ to 1500 rpm Torque range: max. 0.20 Nm / min. 200 nNm (rotation & oscillation) Frequency range (oscillation): 10⁻⁵ to 100 Hz Normal force: 0.01 – 50 N (resolution: 0.001 N) Temperature range: –60 °C to +400 °C (with suitable thermostat) Dimensions (W × D × H): 400 × 400 × 780 mm Weight: approx. 42 kg Special Features: Very high measurement accuracy due to low mass inertia Precision lift mechanism (0.5 µm adjustment accuracy) Modular expandability (High Shear, RheoAdaptive Control) Compatible with various thermostats Scope of Delivery: HAAKE RheoStress 6000 base unit Power cable Iisdpfx Afswv Nrhofek Software Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors excepted!) If you have any further questions, feel free to contact us by phone.

Condition: used, Electronic crimpers provide secure, reproducible crimps. A single press of the button both closes the crimping jaws to attach the seal and opens them to release the vial. Decappers provide quick and easy removal with a single press of the operation button. Adjustable crimp settings allow compatiblity with standard aluminimum, pressure-release, tin-plated steel and bimetal two-piece seals† Ergonomic design reduces wrist strain Controls and indicator lights are visible and accessible for left- or right-handed operation Crimpers and decappers can be operated while plugged in and recharging Vials can be crimped or decapped while they remain in most standard removable sample trays Crimp-force sensing automatically determines when a proper seal has been formed and opens the jaws to release the vial Iijdpfx Afexzhy Ssfsk

Condition: excellent (used), Heraeus / Thermo Type: WU 6100 Heat-drying oven with recirculating air 500°C Description Heat and drying oven Heraeus WU 6100 up to 500°C Recirculating air oven for thermal testing of high-quality materials. For precise heat treatment processes up to 500°C Offers precise and even temperature distribution as well as exact maintenance of the selected temperature. Technical data: Internal volume: 52 L Temperature range up to 500°C External dimensions (W x H x D): 744 x 552 x 535 mm Internal dimensions (W x H x D): 403 x 380 x 370/339 mm Weight: 53 kg 400 V 50/60 Hz 11.4 A 5.4 kW Equipment: Temperature controller with digital display Over and under temperature protection Throttle for stepless fresh air and exhaust air regulation Timer Speed control for the recirculating fan Iijdpfx Aowq Rl Ejffjk Stainless steel inserts Condition: used Scope of delivery: (See image) (Changes and errors in the technical data, specifications reserved!) If you have further questions, we are happy to answer them by phone.

Condition: used, This listing is for a Thermo Scientific High capacity Dryer A82100126 Digital controller facilitates accurate and constant temperature control from 40° to 90°C. Polished stainless steel drying chamber includes an autoclavable drip tray. Includes air intake with removable filters and easy-to-clean epoxy-coated external finish. Ijdpfexzht Sjx Affjik Listing: Thermo Scientific High Capacity Dryer A82100126 Quantity: 1.0

Year of construction: 2020, condition: like new (used), Here we offer a safety cabinet. Iijdpfsi Dn Idex Affjk The Herasafe 2030i series of biological safety cabinets leverages years of experience in global leadership in BSC design with breakthrough innovations to optimize contamination prevention, ease of use, and information management and delivers the most technologically advanced Class II cabinets on the market. Equipped with "smart" safety features for self-monitoring, intuitive touchscreen graphical user interface and built-in connectivity to maintain key performance to maintain critical performance data, the Herasafe 2030i delivers performance with unprecedented precision for demanding cell culture applications and other sensitive work, that require a high level of safety for product, personnel and environment. Suitable for working with BSL 1, 2 and 3 pathogens, EN1822 standards, dual DC motors, DAVe Plus, SmartFlow Plus and SmartClean Plus. Features intuitive touch screen interface, working height of 20 cm, electrically operated window, segmented worktop in sections of 30 cm and 316L stainless steel interior. Certified by TÜV Nord according to EN12469. Included option, Thermo manually adjustable base 1.5 m Thermo cross-beam UV lamp included Dimensions (L x W x H) outside: 800 x 1600 x 1536 mm Dimensions (L x W x H) inside: 627 x 1500 x 780 mm 230 V 9 A 2010 W Type: Herasafe 2030i 1.5 Condition: used / as new (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: used, This listing is for a Thermo Orion EZ Flash II Iedpfxexzhr Uj Affoik

Year of construction: 2023, condition: like new (used), Thermo Fisher Type: ARL easySpark metal analyzer Analysis table spectrometer with PC, monitor and software Thermo Scientific OXSAS 2.7 software OXSAS is the most modern software for optical emission spectrometers. Current analyses are displayed in tabs. Immediate editing of data sets using fill-down and increment-down tools OXSAS is a multi-processing application with amazing capabilities and potential. The comprehensive functionality of OXSAS enables it to meet all your requirements. Technical machine description: Condition: fully functional In mint condition Year of manufacture: 02/2023 Technical description of the system: The ARL easySpark metal analyzer is designed to meet the challenges and requirements of small to medium-sized plants and laboratories in the metal industry that require high-quality but cost-effective OES analysis for the production of parts for the automotive, aerospace, consumer goods and other industries. The device impresses with its particularly high resolution thanks to a unique optical system based on multi-grating/CCD (charge-coupled device). Additional benefits of the Thermo Scientific ARL easySpark analyzer include: The ability to accurately analyze all elements, from trace levels to percent, in all solid metal samples A breakthrough spark excitation and optical design to ensure best-in-class performance Intuitive, user-friendly Thermo Scientific OXSAS analysis software for a quick learning curve and easy routine operation A robust and reliable design that requires minimal maintenance Compliance with safety and quality guidelines A simple design that is suitable for both novice production users and expert lab staff The instrument is ideal for other areas such as metal recycling, academic and non-academic laboratories and primary metal producers where a cost-effective solution for analyzing metal products and materials for quality assurance and process control or a secondary instrument is required. Power connection: 110-230 VAC, 50Hz or 60Hz Max. power: 600 VA Dimensions: Approx. L x H x D 0.80m x 0.45m x 0.70m Iodpfx Afov Hbvbjfoik Weight: Approx. 80 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, This listing is for a Thermo Electron Corporation CR 4i Refrigerated Centrifuge Specifications Capacity: Swing-out rotor: (4 x 750 mL) 3000 mL Fixed angle rotor: (8 x100 mL) 800 mL Maximum load: 3.6 kg Speed range: 500 to 7800 rpm RCF range: 20 to 9900 x g Temperature range: -9°C to 40°C Dimensions (H x W x D): 45 x 85 x 66 cm (16.5″ x 33.5″ x 26″) Weight: 106 kg (233 lbs) Electrical: 120V, 60 Hz Ijdpfx Afjxzhhisfeik

Condition: excellent (used), Heraeus Incubator Incubator Here we offer an incubator. Volume 30 litres Manufacturer: Heraeus Outer dimensions: height 552 mm x width mm 552 x depth 610 mm Interior dimensions: height 231 mm x width mm 352 x depth 370 mm Nominal temperature: 50 °C Connection: 220V 50/60 Hz 1,00 A 0,22 kW Weight: approx. 41 kg Type: B 6030 Iodpfx Afjg Aiq Nofjik Condition: used / used Scope of delivery: (see picture) (Changes and errors in technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: used, This listing is for a Thermo Electron Corporation Shandon Histocentre 3 Coldplate Iijdjxzhgxspfx Affjk

Condition: excellent (used), Thermo Finnigan Type: Thermo Finnigan Trace MS 2160 / Thermo Finnigan DSQ II Thermo Finnigan mass spectrometer Thermo Finnigan GC/MS system Trace MS 2160 with Thermo Finnigan DSQ II Description: Mass spectrometer Mass range up to m/z 1050 Ionization methods: EI, (CI) Quadrupole separation system Automatic sample changer Data system: Xcalibur with NIST spectra library Split/splitless injector and PTV injector Direct sample inlet via push rod Condition: used Scope of delivery: (See picture) Iiodpfx Afevyd S Sofek (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, This listing is for a Thermo Shandon Consul Coverslipper The Shandon Consul permanently covers slide-mounted specimens using routinely accepted glass coverslips. This is the only method truly compatible with the optics of today's high-performance microscopes and image analysis systems Dimensions (H x W x D)* 23.6” x 27.2” x 20” (60 x 69 x 51 cm) *Clearance Height (hood up) is 40.9” (103.8 cm). Weight 121 lbs. (55 kg) Power Requirements 110-120V or 220-240V, 50/60Hz; 100 VA Iiodpfx Afoxzhdqsfjk

Condition: used, This listing is for a Thermo Labsystems Multiskan Ascent Microplate Reader The Thermo Labsystems Multiskan Ascent is an advanced, compact, one-channel vertical light path filter photometer designed to perform standard photometric measurements. The measurement types include end point, two point and kinetic measurements. Due to the innovative optical system of the Multiskan Ascent, the instrument can read both 96- and 384-well microplates and is linear to 4.0A. The instrument is a rapid reading microplate reader. Isdpoxzhctofx Affjik