Thermoforming machine

Illig Sb 74 D

Condition: excellent (used), functionality: fully functional, Berstorff Twin-Screw Extruder ZE (CL) 25 Technical Data: • Year of manufacture: 1997 Dkedpfjw Iqhmox Afnog • Motor power: 11.6 kW • Heating capacity: 16 kW • Screw speed: 500 rpm Screw: • Co-rotating twin-screw extruder, 2 × 25 mm × 30 L/D • Modular construction (screw elements) • 2 × degassing zones • K-TRON twin-screw feeder Control: • Conventional contactor control • Control cabinet integrated into machine frame • Separate operating panel with control interface • Digital displays (temperature and melt pressure) as well as various indicator lights Miscellaneous: • Machine is connected and ready for testing • Test run possible by arrangement

Condition: new, Year of construction: 2017, operating hours: 25 h, functionality: fully functional, saw band length: 520 mm, saw band width: 580 mm, total height: 1,500 mm, total length: 5,200 mm, total width: 2,350 mm, type of input current: three-phase, overall weight: 2,500 kg, input voltage: 380 V, New machine. Dsdpfx Afounia Henokg

Condition: excellent (used), Year of construction: 1992, operating hours: 41,685 h, Technical specifications: Rated power, kW: 11,3 Mold area, mm: 475 x 250 Max. film width, mm: 495 Min. film width, mm: 150 Max. feed length, mm: 280 Min. feed length, mm: 50 Max. drawing depth/negative, mm: 100 Dsdpfxoq A Um Rs Afnekg Number of cycles/min.-max.: 48 Consumption of air/cycle at 6 bar: 100 Nl (net-pressurized air) Heat energy to be dissipated: with top heating ca. 10 260 KJ/h with top and bottom heating ca.: 17 715 KJ/h Special equipment: Hollow floor facility available Control cabinet: included

Condition: reconditioned (used), > Top heating with pilot radiator control > Single radiators of the top heating Djdpfxsfua Huo Afnjkg > 2 cooling fans D05 > Automatic preblow and demoulding > Documentation and plans in German > Max. forming area 1210 x 500 > Longitudinal and cross cutter with 6 quick-change squeezing knives > Euro hole punching device (can be retrofitted at extra charge) > completely overhauled

Year of construction: 2008, condition: ready for operation (used), A Geiss large-format vacuum thermoforming machine is available. Panel cutting min.: 1100mm/1300mm, max. panel cutting: 2100mm/1800mm, max. forming depth: 620mm. Additional panel format 1: min.: 850mm/750mm, max.: 1850mm/1250mm. Additional panel format 2: min.: 1050mm/800mm, max.: 2050mm/1300mm. Including a separate loading machine with pneumatic panel separating equipment, an automatic aligner for panel cuts in longitudinal and transverse direction, a pneumatic pusher for removing the molded parts from the loading unit, fully automatic central lubrication of the loading machine, several interchangeable pallets for window panel sets, a storage rack for window panels as well as a vacuum control with four independently adjustable flow stages and an air preparation system. Documentation available. On-site inspection is possible. Dkjdpfewih Arsx Afneg

Condition: excellent (used), Year of construction: 2014, operating hours: 19,000 h, functionality: fully functional, Gabler M92L thermoforming machine, in excellent running condition. Dodswcdvnjpfx Afnokg

Condition: reconditioned (used), functionality: fully functional, Plate size: 1250 x 1500 mm Forming area: 1200 x 1460 mm Drawing depth: 700 mm Dsdpjwf Ea Tsfx Afnjkg If you would like further details or a quote, please contact us.

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. Dkedpfjiyynwsx Afnjg additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome

Condition: reconditioned (used), functionality: fully functional, Technical Specifications: - Maximum material size: 2500 x 1500 mm - Maximum forming area: 2450 x 1450 mm - Maximum tool height: 600 mm - Maximum material thickness: 12 mm Dkjdpfxowf Eb Rs Afnsg Equipment: Forming Station - Schleicher P03 control system - Automatic setup function - Top heater: ceramic emitters (500 W) with 4-zone control - Individual selection of upper heating elements, including lowering - Bottom heater: ceramic emitters (300 W) with 4-zone control - Individual selection of lower heating elements, including lowering - Program and heating settings storage - Clamping frame with quick-change system - Parallel upper frame, longitudinal runners for use of fixed format frames - Lower clamping frame for frame installation from below, central clamping via E-motor - Pneumatic lower table with rapid/creep speed, adjustable in 15 steps via control panel - Upper punch with rapid/creep speed, adjustable in 7 steps - Vacuum pump with cascade control, adjustable in 15 steps via control panel - Pre-blow automation, percentage adjustable - Pre-vacuum adjustment, percentage adjustable - Automatic demolding, percentage adjustable - Plate sag control via light barrier with support air - 8-fold cooling fan with spray nozzle cooling - Large front opening for tool change Loading - Automatic sheet loading system - Centering table for precise positioning of sheets in the feeder - Motorized sheet lifter - Motorized sheet positioning adjustment - Motorized transport lifter - Motorized adjustment of transport width

Condition: reconditioned (used), functionality: fully functional, Max. forming area 960 x 660 mm Min. forming area 269 x 444 mm Max. sheet thickness (manual loading) 12 mm Max. sheet thickness (automatic loading) 10 mm Max. tool height 450 mm Year of manufacture 2000 Technical features of forming station UA 101 L: - Siemens control with swiveling operating panel - Powered movement of upper and lower heaters via rocker arm - Upper heater: 5 temperature control circuits via pilot radiators - Lower heater: 3 temperature control circuits via pilot radiators - Height-adjustable upper heater - Upper plunger system - Parallel clamping frame - Automatic window plate adjustment, lower frame - Automatic window plate adjustment, upper frame - Vacuum for sub-table adjustable via cascade control - Pre-blow/demolding adjustable via cascade control - 4 cooling fans - Front opening with pneumatic interlock for tool change - Film sag control - Film pre-blow control Dsdpfowf Dtxex Afnskg - Vacuum preparation at the upper plunger - Tempering connection - Automatic tool change system, large setup - Vacuum pump Technical features of loader BE 101 L: - Upper and lower preheating - Powered movement of upper and lower heaters via rocker arm - Upper heater: 5 temperature control circuits via pilot radiators - Lower heater: 3 temperature control circuits via pilot radiators - Height-adjustable upper heater - Motorized, parallel lifting film transport - Film transport via pin chain - Film guidance with rollers - Automatic transport width adjustment - Motorized sheet lifter with automatic tool clamping - Mobile sheet loading trolley Options (price on request): - Pyrometer in upper heater for measuring temperature on film - Retrofit for roll material processing