Used Circular Saw Wave New for sale (22,662)

Condition: new, Year of construction: 2025, type of input current: three-phase, cutting width (max.): 1,250 mm, saw blade diameter: 400 mm, cutting length (max.): 3,200 mm, main saw diameter: 400 mm, CIRCULAR SAW model SCM SI 4 . CN NEW machine in prompt delivery CE regulation: YES CN control "READY" 2 controlled NC axes (lifting and tilting of the blade) Credpsglp I Nefx Agvjc - blade lifting and tilting management - tool data settings with automatic correction of the height of the blade with respect to the inclination - electric and automatic NC mode with 99 storable programs digital display on the parallel guide n.02 reversible stops on the squaring guide extension floor out with scoring unit : YES max diameter saw blade 400 mm length of the squaring carriage mm 3200 main blade motor power Hp 9.5 scoring unit motor power Hp 1,7 3 main blade rotation speed rpm. 3000 /4000 / 5000 volt. 380/50

Condition: used, Used machine Equipment and technical data: High-performance multi-blade saw Heavy-duty cast iron construction Robust transport chain consisting of directly interconnected precision links Wear-resistant guide surfaces of the transport chain with an extremely low coefficient of friction Automatic chain lubrication Four-point saw arbor bearing for maximum stability Saw bushing with conical seat and self-centering function Four pressure rollers for precise cuts, even with thin workpieces Credpszbv Hzsfx Agvsc Four slitting and anti-kickback finger rows Cutting height up to 110 mm with a 350 mm saw blade diameter Minimum cutting length 250 mm Clamping width of the saw bushing 300 mm Minimum and maximum saw blade diameter 200/350 mm Saw arbor speed 4200 rpm Feed rate 4-48 m/min Transport chain width 300 mm Saw bushing diameter (with 2 wedges 20 x 5 mm) 70 mm Work table height 750 mm Dust extraction port diameter 200 mm Air volume at 25 m/s 3500 m³/h Motor 25 kW Feed motor 1.1 kW With laser guide 1800 kg Sound emission 98.3 dB W (A) at idle without dust extraction In operation: 107.1 dB W (A) Workplace-related emission level 81.8 dB W (A) at idle without dust extraction In operation: 91.2 dB W (A) Availability: short-term Storage location: 63934 Röllbach

Condition: new, 400 x 32 mm capacity 90 degrees: round 145 mm capacity 90 degrees: square 130 x130 mm capacity 90 degrees: flat 300 x 80 mm capacity 45 degrees: round 105 mm capacity 45 degrees: square 115 x 115 mm capacity 45 degrees: flat 250 x 60 mm total power requirement 1,8 kW weight of the machine ca. 240 kg dimensions of the machine ca. 800 x 1100 x 1400 mm Domestic equipments: - stepless, electronic speed control - Optional hydraulically controlled or manual belt arm lowering - Saw arm can be swiveled up to 60 ° right - quick release vice Cedpfxjyv Nhps Agverc - Band guide with 8 ball bearings - Hydraulic saw blade clamping with clamping pressure display and strip break-off - Including coolant device - incl. machine cabinet

Condition: used, Year of construction: 2009, Sawblade tiltable 45 ° cutting width 95 × 60 mm Motor output 1,3 kW bis 1,8 kW kW Credpfeywnvnjx Agvsc Saw blade diameter 315 mm Dimensions (L/W/H) 1100x900x1450 mm machine weight ab. 230 kg

Condition: used, Year of construction: 1992, saw blade diameter 450 mm Saw blade 50 mm Crsdpfx Agsyv N Naovoc capacity 90 degrees: round 150 mm capacity 90 degrees: flat 290x30 mm capacity 90 degrees: square 135x135 mm 0 - 1000 mm/min rapid return speed 1650 mm/min 0 - 30 ° dimensions of the machine ca. 1500x1200x1770 mm weight of the machine ca. 750 kg

Condition: used, Year of construction: 2003, saw blade diameter 300x32x2,5 mm capacity 90 degrees: round 10-90 mm capacity 90 degrees: flat 80x10-80 mm capacity 90 degrees: square 10-80 mm Cutting range at 90 degrees: round - solid materia 10 - 40 mm Cutting range at 90 degrees: flat - solid material 40x10-40 mm Cutting range at 90 degrees: square -solid materil 10- 40 mm turning speeds 1700/3400 U/min weight of the machine ca. 600 kg dimensions of the machine ca. 2590x1910x1910 mm Accessories: -Footswitch with emergency stop -Micro spraying device -HM circular saw blade 350 mm Cjdpfx Agjyv Nvtevorc

Condition: used, Year of construction: 2001, saw blade diameter 350 mm 190 mm speeds 15 / 30 / 45 / 90 U/min Cedpfxoyvvpmo Agvsrc power requirement 1,8 / 2,6 kW kW

Condition: excellent (used), Year of construction: 2010, Sliding table length: 3700 mm Cutting width at rip fence: 850 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 120 mm Scoring unit: no Saw blade height adjustment: electric / position control Saw blade tilt adjustment: electric / position control Rip fence adjustment: manual Saw blade diameter: 400 mm Speeds: 4000 / 4800 / 6000 rpm Motor power: 7.5 kW, 400 V, 50 Hz Extraction connections: 80 and 120 mm Crjdpfexzfqbjx Agvec INCLUDED: Laser cutting line indicator MITREX double mitre fence Machine dimensions approx. L x W x H = 3850 x 1650 x 1850 mm Weight approx. 1200 kg Note on used machines: • Errors in technical details and prior sale reserved. • Prices listed are ex-works prices – loading free of charge! • The machine has been cleaned and functionally tested. • All machines are sold as inspected, with no claim to warranty. Buyers are welcome to inspect the machines at our site. • Special agreements are only valid in written form. (We only respond to inquiries including your address and telephone number!)

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 119349, saw blade diameter: 450 mm, total length: 12,000 mm, total height: 2,000 mm, total width: 1,200 mm, overall weight: 1,500 kg, KALTENBACH SKL 450 H Cold Circular Saw (completely overhauled) - Saw blade diameter: 400/450 mm Credpfx Asy Dcrwsgvec - Saw blade mounting: 50/4 x 14/80 - Working range, round material 90°: 135/160 mm - Square 90°: 125/145 mm - Profiles 90°: 300 x 40 mm / 320 x 50 mm - Profiles horizontal 45°: 220 x 60 mm / 250 x 40 mm - Profiles vertical 45°: 60 x 130 mm / 100 x 150 mm - Saw motor: 3.7 / 4.7 kW - Cutting speed: 1950 / 3900 m/min - Infeed roller conveyor T3, outfeed roller conveyor T3 with length measuring system L45E, one starter section: 2000 mm, horizontal clamping system SKL 450 Note: The machine has been completely overhauled! Note: The item must be definitively collected between 07 and 09 July 2026, on a date to be agreed. FCA D-71263 Weil der Stadt - loaded onto truck

Condition: good (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: MV-117894/D, saw blade diameter: 400 mm, total length: 8,000 mm, total height: 1,900 mm, total width: 1,000 mm, overall weight: 1,000 kg, KALTENBACH SKL 400 EC-H cold circular saw automatic (completely overhauled) - Max. cutting width: 4 mm - Saw blade arbor bore: 50 mm - Number of mounting bolts: 4 pcs - Bolt circle diameter: 80 mm - Saw blade feed rate: 0 - 3000 mm/min - Rapid return: 4500 mm/min - Adjustable travel of workpiece stop: 70 mm behind and 40 mm in front of the biometric zero point = 110 mm - Stepless manual rotary table adjustment: 90° This is a completely overhauled machine. Crodpfjy Dcqyex Agvjc Specification: Dosing system MS-2 C, infeed roller conveyor T3: 4 m, infeed roller conveyor T3, outfeed roller conveyor T3 with L45D length measuring device Note: This item must be collected on a binding date between July 7th and July 9th, 2026 (exact date to be coordinated). FCA D-71263 Weil der Stadt - loaded onto truck

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 313026, saw blade diameter: 450 mm, total length: 10,000 mm, total height: 2,000 mm, total width: 1,200 mm, overall weight: 2,000 kg, KALTENBACH SKL 450 H Semi-automatic Cold Circular Saw - Operating voltage: 3 x 400 V - Frequency: 50 Hz - incl. roller conveyors Crsdpfx Agey Dcr Dsvsc Attention: The item must be collected on a binding date between 07 and 09 July 2026, to be agreed upon. FCA D-71263 Weil der Stadt – loaded onto truck

Condition: good (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 117004, total length: 7,500 mm, total width: 1,200 mm, total height: 2,000 mm, overall weight: 2,500 kg, KALTENBACH SKL 400 H Cold Circular Sawing Machine (completely overhauled) - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 20 A - Saw blade: 400 x 4 x 50 mm - Saw blade mount: 50/4 x 14/80 mm - Working range, round material 90/45°: 130 mm - Square material 90°: 120 mm - Profiles 90°: 300 x 45 mm - Profiles horizontal 45°: 220 x 60 mm - Profiles vertical 45°: 80 x 120 mm Csdjy Dcu Espfx Agvsrc - Saw motor: 3.7 / 4.5 kW - Cutting speed: 1750 / 3500 m/min - Saw blade feed: 0 - 3700 mm/min - Saw blade rapid return: 4500 mm/min Additional equipment: - Workpiece clamping with short stroke vise: stroke 8 mm - With hand crank for presetting - Machine overhauled and newly painted - Horizontal clamping cylinder front, each - Minimum quantity lubrication instead of coolant spray system - T3 feeder roller conveyor with rollers 60 x 289 mm - One starter section: 2000 mm, with 5 rollers, one support leg, one mounting angle - One extension section: 2000 mm, with 4 rollers, one support leg, one stop roller, adjustable as a guide for material bars - Length measuring device including T3 discharge roller conveyor Note: The item must be collected by binding appointment between 07 and 09 July 2026 (exact date to be agreed). FCA D-71263 Weil der Stadt – loaded onto truck

Condition: used, functionality: fully functional, machine/vehicle number: 032-121331, saw blade diameter: 650 mm, cutting height (max.): 245 mm, feed length X-axis: 400 mm, input voltage: 400 V, saw drive: 12,000 W, saw blade speed: 3,000 rpm, AVOLA GAMA 65 V Circular Saw Machine / Miter Saw - Fully Equipped (12 kW) Professional AVOLA GAMA 65 V circular saw machine in top condition and with comprehensive equipment for sale! For sale is a crosscut, rip, miter, and bevel saw with lateral feed from the renowned manufacturer AVOLA (model GAMA 65 V), including extensive accessories and original professional optional equipment. The machine is characterized by its exceptional power and precise cutting performance in professional commercial applications. Technical Data & Highlights (Standard Version): Drive motor: Powerful 12.0 kW / 400 Volt - 50 Hz (Direct Drive) Speed (Motor/Saw Blade): 3,000 rpm Cutting heights: 90°: 245 mm | 45°: 164 mm | 30°: 113 mm Saw blade: Carbide-tipped saw blade 650 mm Machine table: Laterally adjustable by approx. 400 mm with pneumatic braking system Angle adjustment: Turntable adjustable from 0 to 270° Saw blade bevel adjustment: Electrically adjustable from 90° to 30° Miter device: Pneumatically operated via a safe two-hand control Cutting indicator: Integrated laser for precise miter cuts Safety & Comfort: Machine hood with lateral PVC protective guards, pneumatic clamping cylinders (left/right), mechanical stop system for height adjustment with measuring scale Dust extraction: 2 dust extraction connections (diameter 160 / 125 mm) Roller tables: 6 meters on the left side, 4 meters on the right side 2x SCHUKO Mobile Dust Extraction Unit Profi S 3 (sound-dampened version) Commercial sale by Fischer Bau GmbH. Crjdpjzbuyyofx Agvec The stated price is a gross price (including 20% VAT). You will receive a proper invoice with VAT shown. Warranty Note: For companies/entrepreneurs (B2B): The sale is made with the complete exclusion of any warranty, guarantee, and liability for defects. Condition & Inspection: Purchased as inspected and tested. An inspection and functional test are possible in Weissenbach 153, 8967 Haus im Ennstal, by prior arrangement.

Condition: used, Bore: 60 mm Width: 3-5 mm Diameter: 370 – 380 mm Bolt circle: 100 mm - as new or sharpened, - 8 pieces, - suitable for Holzma OPT HPP 350 or similar. Crodolf I D Eepfx Agvec

Condition: used, Year of construction: 2022, PANEL SAW WITH TILTING SAW BLADE Linvincibile SI 5 KEY FEATURES SLIDING TABLE: GUARANTEED SUPERIOR CUTTING QUALITY OVER THE LONG TERM TELESCOPIC ARM: AN “UNBEATABLE” SMOOTH MOVEMENT SAW UNIT: FOR A PERFECT CUT Technical Data SI 5 Main saw blade diameter (mm): 550 Cutting capacity with extendable fence - with table 3200 mm - with table 3800 mm 3200x3200 3800x3200 Saw blade tilt (degrees): 46 Max. cutting height at 90° (mm): 200 Max. cutting height at 45° (mm): 130 Saw blade speed (rpm): 2500-3500-5000 Scoring blade speed (rpm): 8500 - Extractor port diameter: - on frame - on blade guard 120 100 Main motor power [S6 -40%] Hz50 kW: 7 Scoring motor power [S6 -40%] Hz50 kW: 0.9 Cutting width at rip fence (mm): 1600 Standard equipment and accessories - Optimizer/Process control app for tablets: SCM Thundercut. The app can be downloaded from the App Store or Play Store for tablets compatible with iPadOS or Android. It can be activated via the QR code supplied with the machine. The app enables: * Management of machine fleet and material/panel storage * Creation and editing of projects, importing projects from main furniture design software (file format "cpout"), importing cutting lists * Optimization of cutting lists by selecting one or more proposals from the optimization software integrated into the app * Correct machine settings for each cut, thanks to the simple and intuitive graphics of the 3D sequencer, guiding the operator step by step * Printing barcode labels to identify the various parts, via Bluetooth connection with compatible label printers. - 10-year warranty on the sliding table guide system - Sliding carriage entirely made of aluminum structure with guidance on crimped, hardened and arc-ground steel rails with large contact area - Max. saw blade diameter* up to 450mm with scoring blade mounted* up to 550mm without scoring blade - eye-S 15" electronic control including: * 15" touchscreen monitor * Direct control of the following working axes with manual, semi-automatic, automatic, and incremental modes: - Height adjustment of the main saw blade - Tilt adjustment of the saw unit - Rip fence adjustment - Height and lateral adjustment of the scorer (the scorer is automatically raised to the set position on activation and lowered on deactivation) * Operator assistance functions for complex cuts * Ability to store up to 1000 programs with associated image * Ability to store up to 1000 different tools with associated image * Cutting process management of preloaded parametric machining programs * Environment for creating and storing new sequenced working programs * Automatic import of working dimensions from Thundercut app * USB port * Ready for network connection - Auxiliary function of the electronic control, including: * Determination of correct fence position on rip fence for format processing with tilted saw blade * Determination of correct fence position on rip fence for angle cuts with mitre fence on the work table with or without tilted saw blade - Pivoting control panel above the table - Scoring unit with independent Credpfx Aoxqtvqogvoc

Condition: excellent (used), Year of construction: 2003, functionality: unexamined, input voltage: 400 V, input current: 29 A, input frequency: 50 Hz, cutting height (max.): 320 mm, saw blade diameter: 750 mm, tilt adjustment saw blade: 45 °, height adjustment type: electric, actuation type: electric, rotational speed (max.): 800 rpm, rotational speed (min.): 650 rpm, Equipment: CE marking, rotational speed infinitely variable, saw blade guard, The machine can be rotated and tilted in all directions. Cedsza Ut Rspfx Agverc Cutting height at 90° is 320 mm. The machine can be used for trimming and edging. We purchased the machine in 2020, but since then it has just been sitting idle because we now primarily do carpentry and interior design work. The machine is in very good condition and can also be delivered.

Condition: ready for operation (used), Year of construction: 1952, functionality: fully functional, machine/vehicle number: Typ Cre, Saw blade sharpening machine – straight grinding – for circular saw blades with a diameter of 80 to 800 mm. A clamping device for band saw blades is available. The operating manual is also included. The machine is in working order and can be demonstrated. Crjdpfx Agoza Tl Sevoc

Condition: excellent (used), Panel Saw-Spindle Moulder KNAPP KFS Profi T -used- Sliding table saw with format sliding carriage, with outrigger table, tilt-adjustable circular saw, mitre and angle fence, tilt-adjustable spindle moulder, moulder spindle with reversible rotation (clockwise/counterclockwise), fine-adjustable moulder fence ----- Technical Data ----- Cutting length (sliding table): 2,000 mm Cutting height: 103 mm Cutting width: 700 mm Max. saw blade Ø: 315 mm Saw blade tilt range: 45° Spindle moulder diameter: 30 mm Spindle tilt range: 45° Spindle speeds: 2,850 / 4,000 / 7,800 rpm Saw extraction port: 120 + 40 mm Spindle extraction port: 120 mm Dimensions (LxWxH): 2,010 x 1,230 x 83 mm Weight: 590 kg Quality info: - All settings checked - Adjusted according to manufacturer specifications - Complete basic inspection - Thorough basic cleaning - Electrical system checked - Immediately ready for operation Credpfx Asyyzqdsgvsc

Year of construction: 2004, condition: used, Technical details: Saw blade diameter: 450 mm cutting diameter: 150 mm hole of sawblade: 50 mm saw blade diameter: 400 - 450 mm saw blade rpm: 6 / 12 / 24 / 45 U/min cutting range 90 degrees: square: 140 x 140 mm cutting range 90 degrees: round: 150 mm cutting range 90 degrees: flat: 400 x 30 / 345 x 70 / 300 x 95 mm table-size: Ø 700 mm table rotating: 360 Grad clamping capacity: 30 bar electrics - voltage/frequency: 400 / 50 V/Hz total power requirement: 3,6 kW weight of the machine approx.: 1600 kg dimensions of machine: 1,5 x 1,0 x 2,35 m SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE - UNDERFLOOR SAW Crodpfxeu Nit Rs Agvoc for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Circular saw with hydraulic material clamping (clamping pressure adjustable) miter +30° to - 90° Equipped with electro-hydraulic control Hydraulic pump 2.2 kW; 23 l/min. Coolant system integrated in the machine base Piece counter *

Condition: used, Technical details: Saw blade diameter: 400 mm cutting diameter: 140 mm hole of sawblade: 50 mm saw blade rpm: 6 / 12 / 24 / 48 U/min cutting range 90 degrees: round: Ø 140 mm cutting range 90 degrees: square: 130 x 130 mm cutting range 90 degrees: flat: 370 x 30 / 315 x 70 / 265 x 95 mm Cjdpju Niuzjfx Agverc Table dimensions: Ø 700 mm table rotating: 360 Grad clamping capacity: 8 - 30 bar electrics - voltage/frequency: 400 / 50 V/Hz air-pressure connection: 6 - 8 bar total power requirement: 3,6 kW weight of the machine approx.: 1170 kg dimensions of machine: T: 1,5 x B: 1,0 x H: 2,35 m SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE Profile circular saw with two-hand control (underfloor saw) for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Mitre cut 30° to 90° Operation Control panel and two-hand operation Material clamping (opening width) adjustable with return stroke Saw blade feed speed adjustable Without coolant system *

Condition: used, Technical details: Credpfx Aeu Nif Tjgvsc saw blade diameter: 250 mm grinding wheel hole diameter: Ø 25 feed - manual: per Hand mm Cutting height: max. 70 mm current: 8,5A / 50Hz / 220V A/Hz/V table-size: L:520 x B:500 mm dimension machine xH: 0,6 x 0,6 x 0,9 m Sale at sales price as spare parts dispenser, non-functional no UVV conformity (accident prevention regulations) *

Condition: used, Technical details: Saw blade diameter: 350 mm cutting range 90 degrees: round: 110 mm cutting range 90 degrees: square: 85 x 85 mm cutting range 90 degrees: flat: 180 x 85 mm cutting range 45 degrees: round: links/rechts: 105 / 110 mm cutting range 45 degrees: square: links/rechts: 85 x 85 / 85x85 mm cutting range 45 degrees: flat: links/rechts: 130x85 / 130x85 mm hole of sawblade: 40 mm range of revolutions per minute - continous: 9 / 18 / 36 / 74 / 4step U/min rotary table: Ø 400 mm/min table swivelabel +/-: 60° rechts und 45° links ° air-pressure connection: 7 bar total power requirement: ca. 2,2 kW weight of the machine approx.: 430 kg dimensions of machine: B: 0,7 x T: 1,01 x H: 2,1 m The circular saw is an electro-hydro-pneumatic semi-automatic circular saw with which miter cuts of up to 45° inwards or 60° to the right can be made on profiles and solid materials. Vertival circular saw Solid, heavy cast construction max. opening of the vice 180mm cutting counter vertical travel of the saw head: 200mm Vice opening width max. 180mm (jaw size W:220 x H:70mm) Operation via control panel * Csdpeu Nilyefx Agvsrc

Condition: ready for operation (used), functionality: fully functional, type of input current: three-phase, cutting height (max.): 80 mm, total length: 7,470 mm, total width: 1,100 mm, total height: 1,500 mm, overall weight: 450 kg, cutting length (max.): 2,500 mm, main saw diameter: 340 mm, OMGA T720 crosscut saw Specification: - condition - used - manufacturer - OMGA - model - T720 - working width - 250 mm - working height - 80 mm - motor power - 2.2 kW - right table length - 400 cm ( 2 x 200 cm ) - left table length - 315 cm - tables with a width of 29 cm - pneumatic ratchets for cutting to the set length - 3 pcs. - adjustable cutting speed - max blade diameter - 340 mm - spindle - fi 40 mm - suction nozzle - fi 100 mm - weight - about 450 kg - overall dimensions - 742 x 110 x 150 cm (L x W x H) Cedpfsr Ik I Ajx Agverc - body dimensions - 100 x 110 x 150 cm (L x W x H) Additional information: - very good, factory technical and visual condition - presented photos illustrate the actual state of the object of sale - possibility to turn on and check the device on site - the price given in the auction does not include VAT

Condition: excellent (used), functionality: fully functional, MZ Project CS 1000 Optic – Longitudinal cutting saw Cutting width: 1000 mm Cutting height: 100 mm Crsdpsy Ugkfofx Agvsc Cutting speed adjustment: 0-25 m/min Saw blade diameter: 550 mm Motor power: 10 kW

Condition: good (used), Year of construction: 1998, Semi-automatic circular sawing machine Make KASTO Type:V350 U Year 1998 Credofym Ewjpfx Agvjc with mitre cut, roller conveyor and stop Saw blade dm.350mm Pneumatic vice and saw feed Stepless. Machine little used in good condition.