Aluminium Circular Saw

KALTENBACH SKL 400

Condition: good (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: MV-117894/D, saw blade diameter: 400 mm, total length: 8,000 mm, total height: 1,900 mm, total width: 1,000 mm, overall weight: 1,000 kg, KALTENBACH SKL 400 EC-H Cold Circular Sawing Machine (completely overhauled) - max. cutting width: 4 mm - saw blade mounting, bore: 50 mm - number of mounting screws: 4 - pitch circle of mounting screws: 80 mm - saw blade feed speed: 0 - 3000 mm/min - rapid traverse: 4500 mm/min - adjustment range of the workpiece stop: 70 mm behind and 40 mm in front of the biometric zero point = 110 mm - rotary table adjustment, manual, stepless: 90 degrees Iodpfx Aasy Dcqyj Eoid This is a completely overhauled machine. Configuration: Metering system MS-2 C, infeed roller conveyor T3: 4 m, infeed roller conveyor T3, outfeed roller conveyor T3 with length measuring device L45D Note: the item must be collected between July 7th and 9th, 2026, on a date to be confirmed. FCA D-73235 Weilheim Teck - loaded onto a truck.

Condition: good (used), Centre bore 2- 50 mm Diameter of workpiece 8 - 125 mm Lenght of workpiece 50 - 1000 mm Grinding wheel speeds 13'000 - 45'000 rpm Ioderivluepfx Aa Esid Misc.accessories MARCELS MASCHINEN AG

Condition: good (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 117004, total length: 7,500 mm, total width: 1,200 mm, total height: 2,000 mm, overall weight: 2,500 kg, KALTENBACH SKL 400 H Cold Circular Sawing Machine (completely overhauled) - Operating voltage: 400 V Iijdpfxey Dcu Eo Aa Ejd - Frequency: 50 Hz - Rated current: 20 A - Saw blade: 400 x 4 x 50 mm - Saw blade arbor: 50/4 x 14/80 mm - Working range, round material 90/45°: 130 mm - Square material 90°: 120 mm - Profiles 90°: 300 x 45 mm - Profiles, horizontal 45°: 220 x 60 mm - Profiles, vertical 45°: 80 x 120 mm - Saw motor: 3.7/4.5 kW - Cutting speed: 1750/3500 m/min - Saw blade feed: 0 - 3700 mm/min - Rapid return of saw blade: 4500 mm/min Additional equipment: - Workpiece clamping with short-stroke clamping cylinder: stroke 8 mm - with hand crank for pre-setting - Machine completely overhauled and newly painted - Horizontal clamping cylinder at the front, per piece - Minimal lubrication instead of coolant mist spray device - Infeed roller conveyor T3 with rollers 60 x 289 mm - one starting section: 2000 mm, with 5 rollers, one foot, one mounting angle - one extension section: 2000 mm with 4 rollers, one foot, one guide roller, adjustable as a guide for material bars - Length measuring device including discharge roller conveyor T3 Note: the item must be picked up between July 7th and 9th, 2026, on a date to be determined. FCA D-73235 Weilheim Teck - loaded onto a truck

Condition: good (used), Saw blade diameter: 400 mm Cutting diameter: 130 mm Cutting range at 90°: flat – 260 x 60 mm Cutting range at 90°: square – 105 mm Cutting range at 45°: flat – 200 x 45 mm Cutting range at 45°: square – 90 mm Speed range, 2 steps: 1400 / 2800 rpm Drive power, pole-changing: 2 / 4 kW Machine dimensions (L x W x H): approx. 1100 x 1100 x 1700 mm Weight: approx. 850 kg Iodex Rvb Sepfx Aa Ejid Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE – 44143 Dortmund - Wambel / Germany

Condition: new, Year of construction: 2026, machine/vehicle number: SÇ 402 Alttan Çıkma Kesim Makinası, functionality: fully functional, • Compliant with CE standards. • Used for cutting aluminum and PVC profiles. • Hydro-pneumatic cutting operation. • Adjustable cutting speed according to the profile. Ijdpfxerahzge Aa Eoid • Capable of cutting at fixed angles to the right and left: -60, -45, -30, -22.5, -15, 0, +15, +22.5, +30, +45, +60 degrees. • Pneumatic vertical and horizontal clamps. • Ø550 mm diamond-tipped aluminum saw blade. • Equipped with roller conveyor (3 meters right and left). • Oil spraying system. • Enables precision cutting thanks to the 3 kW motor and Hydro-check. • For use with a digital measuring meter.

Year of construction: 1994, condition: ready for operation (used), A refurbished Kaltenbach CNC cold circular saw with an L45NC length stop is available. Year of refurbishment: 2016, max. feed length: 1000mm, miter adjustment: +/-90°, saw blade dimensions X/Y/Z: 400mm/3.2mm/40mm, max. cutting diameter: 130mm, max. cutting capacity for rectangular material: 315mm/40mm, max. cutting capacity for square material: 120mm/120mm, cutting speed: 3000m/min, saw blade feed range: 0mm-1100mm/min, max. material feed speed: 10m/min, machine dimensions X/Y/Z: approx. 2350mm/1250mm/1800mm, weight: approx. 1900kg. Documentation available. An on-site inspection is possible. Iijdpszi Ehvefx Aa Ejd

Condition: good (used), saw blade diameter: 400 mm, – Double mitering Iiodpfx Aeim Ezgea Esd – Mist lubrication system – Protective cap – 400V

Condition: used, Year of construction: 1994, Technical details: saw blade diameter: 450 mm revolution per minute: 2820 U/min cutting lenght max.: 5000 mm cutting length min.: 240 mm air pressure - required: 6-8 bar hole of sawblade: 32 mm mitter cutting - both sides: 45+90 ° air-pressure connection: 6 - 8 bar total power requirement: ca. 4,6 kW weight of the machine ca.: 1,1 t dimension machine xH: 6,05x1,49x1,79 m Further features of the machine: - Pneumatic vertical and horizontal tension - pneumatic mist spraying device - height adjustable machine feet - material supports movable with saw - piece counter Cutting diameter according to tabular cutting range diagram, as dependent on speed and saw blade. Accessories: Ijdou Nigkspfx Aa Eeid - 2 spare saw blades Machine can be demonstrated under power. i.D. *

Condition: good (used), Year of construction: 1984, machine/vehicle number: 102335, Offer 23172 Technical data: - Saw blade diameter up to 400 mm - Cutting range with saw blade diameter 400 mm - at 90° round 130 mm - square 120 mm - flat up to 260 x 60 mm - Mitre adjustment left + right 0 - 90 ° - Cutting speed 1750 / 3500 m/min - Feed speed of the saw blade 0 - 3 m/min - Rapid return 3000 mm/min - Saw drive 400 V / 3.7 / 4.4 kW - Pneum. Material vice with adjustable clamping pressure - Space requirement approx. W 1200 x H 1900 x D 1200 mm - Weight approx. 600 kg - Outfeed roller conveyor 3000 mm Isdpfx Aermkl Asa Eoid - Infeed roller conveyor 3000 mm

Year of construction: 1986, condition: good (used), machine/vehicle number: 106157, Offer 21035 Technical data: - Saw blade diameter up to 400 mm - Cutting range with a saw blade diameter of 400 mm Ijdog A Rgfspfx Aa Esid - at 90° round 130 mm - square 120 mm - flat up to 260 x 60 mm - Miter adjustment left + right 0 - 90° - Cutting speed 1750 / 3500 m/min - Feed speed of the saw blade 0 - 3 m/min - Rapid return 3000 mm/min - Saw drive 400 V / 3.7 / 4.4 kW - 2 pneumatic material clamping devices with adjustable clamping pressure - Space requirement approx. W 1200 x H 1900 x D 1200 mm - Weight approx. 600 kg

Condition: reconditioned (used), Year of construction: 2011, Universal tool milling machine Make: KUNZMANN Model: WF 400 MC Year of manufacture: 2011 - partially overhauled, newly painted, RAL7035 light gray / RAL3027 raspberry red RAL7016 anthracite gray Mach. no.: 410016 with guarantee geometric acceptance with test report Accessories: - HEIDENHAIN TNC 320 contouring control - HEIDENHAIN HR 410 electronic handwheel - attachment kit for TS 220 probe head with taper on the control panel and spindle lock - fixed table 650 x 375 (T-slot: 14 mm) - vertical milling head SK 40 with hydraulic tightening system DIN 69872 - central lubrication, electric - coolant system - splash guard cabin, travelling, electrically secured - rope left window of the spike protection cabin removable, electrically secured - control panel on the substructure Iisdpfevdrx Ujx Aa Ejd - operating instructions used as seen The machine corresponds technically to the standard of the year of manufacture.