Used Double Circular Saw Waves for sale (18,102)

Condition: used, Vesto saw with two discs for sale Pgjdpotqt T Iefx Adnsw - electric motor: 2 x 7.5 kW, - complete with hydrostation, - electrical cabinet.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Double edger and trim circular saw with electronic control, consisting of: RET alignment and infeed table. Chain bed in front of the machine with liftable and lowerable pressure roller. Laser unit. DK 90 L 1000: Passage width 1000 mm. Cutting height 125 mm. Feed speed frequency-controlled up to 100 m/min. Automatic roller height adjustment with roller pressure. Width adjustment hydraulically, electronic positioning control with the following setting options: Continuously variable, cm indexing, and switchable to 2 cm indexing. Cutting width between flanges 24 - 440 mm. 10 adjustable fixed dimensions, direct input in mm. Constant dimension allowance, shrinkage allowance (percentage). Splitter wedge pair: 1 x zero line, 1 x independently hydraulically adjustable with electronic positioning control. Pgodpfx Adjwn D Izonew Splitter wedge opening 48 - 600 mm. Chain bed on the outfeed side. Motor 90 kW with power belt drive. Hydraulic unit. Chip separator ASV DK II with 2 separating lamellae. Electrical cabinet with power section and PLC control. Control panel. Lath clamping sleeve 403 mm clamping length. Adjustment and zero sleeve. Professionally dismantled and loaded onto truck, free of charge.

Condition: ready for operation (used), 6226 - OMS INVINCIBILE OK 330 DOUBLE MITER SAW Motor power: 1.8 kW Manual movement of the units Blade diameter: 330 mm 3000 RPM Maximum distance between units: 3500 mm Cutting angle adjustment: -45°/+45° Vertical and horizontal pneumatic clamps Cutting process started by two buttons Safety switch Width: 900 mm, Height: 1500 mm Pgodpfeu Tc Tvex Adnjw Year: 2003

Condition: good (used), Year of construction: 1996, Distance between saws at 90°max : 4000 mm Cutting height at 90° : 200 mm Pgodpfx Asgixvwednew Cutting with: 130 mm Power: 5,1 kW Weigth: 1260 kg

Condition: used, Year of construction: 1995, cutting width 375 mm Cutting height 150 mm dimensions of saw-blade 500 x 30 mm Motor output 2 x 3 kW Cutting length 5100 mm speeds 2800 U/min air pressure 6 bar weight of the machine ca. 700 kg dimensions of the machine ca. 6100 x 1450 x 1450 mm * Profile support plate made of steel * Stable cast construction of the saw unit * Large cutting range, 2 profiles can be cut at the same time * Easy adjustment of the moving unit with roller guides * Double storage of the swivel device * Safe clamping thanks to the two-pressure system * Double saw feed guide * Hydropneumatic saw feed * External dimension correction scale * Left saw unit fixed Pgedpstv Rgrofx Adnew * Swivel range 45°-90° * Including suction (without piping) ALKO Mobil-Jet 100 year of manufacture 2002

Year of construction: 2004, condition: good (used), A used good condition double miter cold circular saw machine from KASTO Model: "KASTOdisc A10". - Fully automatic operation - Single cut - Hydrasulic saw bars - Central lubrication for saw guides - Coolant device - documentation Saw blade diameter 350mm Cutting range round 90°/ 45° 100/ 100mm square 90/ 45° 100x100/ 100x100mm Rectangle 90°/ 45° 170x100/ 130x100 Shortest remaining piece length with single cut at 90° 30mm Shortest remaining piece length in automatic mode at 90° 260mm Pgjdpfx Adskfvhksnsw Working height 950mm Dimensions WxDxH 1530x1348x1890 mm Weight 980kg Further tech. Data see pdf. document Tech. Data and dimensions: Errors excepted

Condition: excellent (used), Double mitre saw OMS INVINCIBLE OK 330 Maximum cutting length: 3000 mm Maximum cutting width: 140 mm Heads adjustable at 45/-45° angles Motor power: 2×2.2 kW Saw blades: 330 mm Pneumatic vertical and horizontal material clamping Psdpfx Asw U Smwodnsgw

Condition: used, NC Multi-Blade - Double-Blade Saw for Light Metal MIKSITZ Year of manufacture: 1991 Circular saw, aluminium circular saw, table circular saw, mitre saw For cross-cutting and notching aluminium profiles Saw blade travel: 500 mm Max. cutting height: 100 mm Saw blade speed: approx. 5000 rpm Installed saw blade diameter: 300 mm Max. saw blade diameter: 400 mm Motor power: 5.5 kW Power supply: 400 Volt, 50 Hz Table size: 1100 x 1100 mm Table opening: 300 x 1100 mm Working height: approx. 1100 mm Tool holder: SK40 - Several saw blades can be mounted on a single work shaft with double-sided bearing - A long SK40 arbor serves as the work shaft - Belt drive between the drive motor and saw shaft - Table height adjustable via hand crank (to set cutting depth) - Fixtures and stops can be mounted on the table - Saw blade movement via ball screw spindle with servomotor - Single-axis NC control for the cutting movement, LENORD + BAUER type GEL 7541.0000 - Separate control cabinet Space requirement (L x W x H): 1800 x 1600 x 1700 mm Weight: approx. 1100 kg Psdpfxedzp Sns Adnegw

Condition: ready for operation (used), Year of construction: 2017, Swift Jet Water Jet Cutting Machine Pgsdpfx Adow Rg Saenow Ex University Machine Cutting Area 1525 x 3050mm Z axis Clearance 220mm Tank Depth 840mm Water Pump Hypertherm HyPrecision 30Hp Positional Accuracy + - 0.015mm Traverse Speeds 15m/min Advanced nesting and cutting software Collision Protection, heavy duty build that will cut almost any material with no heat distortion. *For sale with Jet Machinery Ltd* Stock No: 78971 Serial No: 1160111 Price: £29,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), functionality: fully functional, Engine power 2.2 KW Manual aggregate movement Disc diameter 330 mm 3000 rpm Maximum aggregate spacing 3300 mm Cutting angle adjustment -45/+45 degrees Vertical pneumatic clamps Pgedpfx Aewbpwhednsw Starting the cutting process with a pedal Safety switch Width 900 mm, height 1500 mm

Condition: reconditioned (used), Year of construction: 1995, functionality: fully functional, Refurbished OMS double-sided drip saw, designed for fast and efficient ripping of wood, aluminium or other materials. Cutting width adjustable by hand wheel with readout Adjustable speed of hydro-pneumatic folding saw Automatic dripping of both saws controlled by a manual panel 2 x top pressure automatically exiting Separate cutting angle adjustment of each saw with scale Pgodpfx Adjvxtxfsnjw CE safety standard Cutting width 155 mm x height 110 mm Technical data: Blade diameter 350 x 20 mm Width x Cutting height for blade Ø 350 mm 155 x 110 mm Length of material to be cut 350 - 3000 mm 2 x 3 kW motor Total length approx. 3500 mm Weight approx. 500 kg

Year of construction: 1997, condition: excellent (used), A used very good condition cold circular saw from EISELE equipped with 370mm circular saw blade, infinitely variable hydro-pneumatic feed, pneumatic material clamping, coolant device and documentation. Speed: 17/ 34 rpm Pgjdpfxokfp D To Adnsw Cutting range: Round 90°/ 45° r. l./ 30° r. 130/ 130/ 105mm. square 90°/ 45° r. l./ 30° r. 120x120/ 100x100/ 90x90mm rectangle 90°/ 45° r. li/ 30° r. 200x100/ 140x100/ 100/100mm Pneumatic connection 7 bar working height 900mm Machine dimensions WxDxH 865x1332x2175mm Weight 460kg Further tech. Data see pdf. document Tech. Data and dimensions: Errors excepted

Condition: good (used), Year of construction: 2012, machine/vehicle number: TTPP-3-2012, cutting height (max.): 260 mm, cutting width (max.): 200 mm, cutting length (max.): 10,000 mm, power: 15 kW (20.39 HP), saw blade diameter: 700 mm, total length: 18,000 mm, WALTER TTPP log saw with double circular blade saws wood up to 950mm in diameter and 10 meters in length 700mm vertical blade and 550mm horizontal blade - 15 kw motors per blade maximum sawing capacity: vertically 260mm and horizontally 200mm hydraulic clamping + taper adjustment rollers Two-cut sawing (in 2 directions) Electronic blade positioning ANTD-03 Selbit Pedpfx Asq H Hwwednegw carbide-tipped blades - 18 teeth

Condition: like new (used), Maximum unit spacing: 340 cm Two motors, each 1.1 kW Cutting angle adjustment: -45 to +45 degrees Saw blade diameter: 300 mm Pneumatic clamps Option to cut with a single blade Control panel Pgjdpfx Aovtpqgednsw Year of manufacture: 2001

Condition: used, Year of construction: 2004, functionality: fully functional, cutting width (max.): 400 mm, cutting length (max.): 6,000 mm, total width: 5,400 mm, total length: 13,500 mm, total height: 2,500 mm, saw blade diameter: 800 mm, type of input current: three-phase, rotational speed (max.): 800 rpm, DePauw QCUWSCNC18 Double Cut Cross Saw, manufactured in 2004. Fully functional and well maintained, suitable for immediate use in production. Cutting width: 400 mm Cutting length: 6,000 mm Total machine dimensions: 13,500 mm (length) × 5,400 mm (width) × 2,500 mm (height) Rear saw blades: 800 mm diameter, maximum speed 1,500 rpm Front saw blades: 500 mm diameter, maximum speed 3,000 rpm Saw type: Double Cut Cross Saws Pedjw Nbhmjpfx Adnjgw Condition: Used, fully operational. Location: Cork, Ireland Delivery available at buyer’s expense. Price: €25,000 Contact for more details or to arrange a viewing.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, main saw diameter: 315 mm, tool diameter: 315 mm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Main saw blade diameter: 315 mm Max. tool diameter: 315 mm MACHINE DETAILS Installed total power: 4 kW EQUIPMENT CE marking Included scoring saw blade Psdpsxxakqefx Adnsgw Tiltable saw blade

Condition: excellent (used), CATALOGUE NUMBER 7065 TECHNICAL DATA - Max. saw blade diameter: 300 mm - Spindle diameter: 30 mm - Blade guards: 2 pieces Pjdpfx Ademv E Hxsnjgw - Pneumatic cutting (up/down blade movement) - Saw units adjustable at 45° - Manual spacing adjustment of the saw units - Min. cutting length at 90°: 220 mm - Max. cutting length at 90°: 2820 mm - Cutting width: 110 mm - Cutting height at 90 degrees: 90 mm - Pneumatic clamps: 2 pieces - Foot switch - Material support - Main motor: 2×1.6 kW - Dimensions (L/W/H): 3620x1100x1250 mm - Weight approx. 500 kg – Unpainted – Tilting saw units – Used saw, in very good condition Net price: 13,900 PLN Net price: 3,300 EUR depending on the exchange rate 4.2 EUR (Prices may change with higher fluctuations)

Condition: good (used), Year of construction: 1993, Mitre saw, saw unit right left, double mitre saw, crosscut and mitre saw, double end tenoner Pgjdpetxkprjfx Adnow -Manufacturer: Emmegi, Pressta Eisele, double mitre saw type SINGLE 2 HM500 -Cutting length: 250 to 5000 mm -Saw units: 45° pivotable -Saw blade: Ø 500 mm -Cutting data 90°: Cutting height 350 mm Cutting width 160 mm -Cutting data 45°: Cutting height 260 mm Cutting width 125 mm -Dimensions: 5750/1220/H1700 mm -Weight: 1200 kg

Condition: good (used), Year of construction: 1989, Sawblade tiltable . ° Pedpfxjxzuy Se Adnegw cutting width .. mm Motor output . kW serial number .

Condition: good (used), Code: 0246 Brand: OMGA Model: TR 2B - NC - CE Standard Automatic double mitre saw with numerically controlled positioner for cutting frames, wood profiles, furniture, wooden window frames, doors, plastic materials, and various - CE standard Technical data: Numerically controlled positioner: allows cutting lists to be stored and the moving head to be positioned automatically Cutting length 3500 mm Blade diameter 350 F 30 mm Motors each 2,2 Kw Rpm 3000 Cutting width 170 mm Cutting height at 90° 102 mm N° 2 vertical pneumatic pressers Suction mouth diameter 80 mm Compressed air 6-7 bar Overall dimensions mm 4400 x 1000 x 1500 h Pgedpexztydjfx Adnow Weight kg 600

Condition: ready for operation (used), Year of construction: 2019, General Data Machine weight 1500 kg Measurements height 1250 mm Dimensions Machine Length 2200 mm Technical Specification Pgodpfxexzltco Adnew Working Width 930 mm Feed Speed 12 m/min This WINTER MBS 930 was manufactured in 2019. It features a motor power of 22.0 KW and a spindle diameter of 74 mm. The saw blade diameter is 205 mm, and it operates at a speed of 2600 rpm. Feed speed ranges from 0 to 12 m/min. Ideal for precise wood cutting. Contact us for more information. Application Types Sawing (Wood)

Condition: excellent (used), For sale is a used Felder K700 P panel saw with a cutting width of 800 mm. The machine is in very good condition and has been refurbished and inspected by our specialist staff. (Fully functional) Technical data: - Saw blade tiltable 90-45° - Sliding table 2000 mm - Short mitre fence 1100 mm - Extension table with mitre fence 2600 mm - Cutting width 800 mm with fine adjustment - Cutting height 102 mm (Saw blade D=315mm) - 5.5 HP (4kW) motor, 400 Volt - Machine No. 80-10/212-01 The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Sale subject to prior sale! Psdpfx Ajxzgd Ajdnjgw Related terms: Saw, circular saw, panel saw, panel Reference: R-N44KA

Condition: excellent (used), CATALOG NUMBER 7623 Technical data: - max saw blade diameter 300mm - spindle diameter 30mm - blade guards 2 pcs - pneumatic blade feed - saw units adjustable to 45° - manual adjustment of saw unit spacing - min cutting length at 90° 300mm - max cutting length at 90° 4600mm - cutting width 90mm - cutting height at 90° 90mm - pneumatic clamps 2 pcs - control buttons - material supports 3 pcs - main motor 2×1.1kW - extraction port diameter 2x90mm - dimensions (L/W/H) 5030x1150x1400mm - weight approx. 500kg ADVANTAGES – Italian production – tiltable saw units – used saw, in very good condition Net price: 15900 PLN Net price: 3780 EUR (depending on the rate of 4.2 EUR) (Prices may change with larger fluctuations) Pjdjwbz Uxjpfx Adnogw

Condition: good (used), Year of construction: 1986, Sawblade tiltable . ° cutting width . mm Pgedpfexzuy Eox Adnow Motor output . kW

Condition: excellent (used), Catalogue number: 7547 TECHNICAL DATA Track width: 300 mm Roll working width: 290 mm Max. disc diameter: 300 mm Disc bore diameter: 70 mm Max. cutting height: 100 mm Table width with extension: 680 mm Table length: 1630 mm *From above: 2 rows of pawls Metal pressure slip roller Roller with saws 2 smooth metal pressure slip rollers From below: Guide rail Pawls Track Electric height adjustment of main body (up/down) Central track lubrication 2 feed speed modes Feed motor: 1.1 kW Main motor: 22 kW Extraction nozzle diameter: 130 mm Overall dimensions (L/W/H): 2000x1400x1700 mm Weight approx.: 900 kg – Italian manufacture – Very good condition – Used multi-blade saw Pgjdpsvx N Ucofx Adnjw Net price: 34,900 PLN Net price: 8,300 EUR (based on 4.2 EUR rate) (Prices may vary according to rate fluctuations)