Used centers (universal) 600-699mm (x-travel) for sale (84)

Condition: ready for operation (used), Year of construction: 2004, operating hours: 48,702 h, functionality: fully functional, machine/vehicle number: 16261, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller model: Siemens Sinumerik 840 D pl , spindle speed (max.): 28,000 rpm, TECHNICAL DETAILS Travel Paths X-axis travel: 650 mm Y-axis travel: 600 mm Z-axis travel: 500 mm Main Spindle Spindle speed range: 20 – 28,000 rpm Spindle drive power: 23 / 18 kW Max. torque: 79 Nm Tool taper: HSK-A63 NC Rotary Swivel Table Clamping surface: Ø 630 mm Swivel range A: +30° / -115° Rotatable C: 360° Max. table load: 500 kg Max. workpiece dimensions: Ø 630 x 313 mm Table rotation speed A: 25 / C: 65 rpm Tool Changer Number of tool stations: 117 Max. tool diameter: 90 mm Rjdpfxjxbz A Hj Ahzjbt Max. tool length: 300 mm Feed Rates Rapid traverse (X / Y / Z): 60 m/min Acceleration: 10 m/s² Feed force: 8.5 kN MACHINE DETAILS Control: Siemens Sinumerik 840 D pl Space Requirement & Weight Required space approx.: 8.5 x 5.5 x 3.0 m Machine weight approx.: 10,500 kg Total power requirement: 43 kVA Operating hours: 48,702 h EQUIPMENT - Documentation - High-pressure cooling - Coolant system - Internal coolant supply: 80 bar / 1,300 l - Electronic handwheel - Fully enclosed cabin - FASTEMS pallet pool / 15 positions - Chip conveyor - Paper band filter - Renishaw probe - Tool breakage monitoring Note: Transport lifting gear must be provided by the buyer. The pallet system cannot be observed under power. The Fastems controller is defective.

Condition: used, Year of construction: 2018, x-travel 620 mm y-travel 520 mm z-travel 460 mm c-axis 360 ° b-axis -50 / +110 ° distance spindle nose and table 170 - 630 mm CNC-control iTNC 640 HEIDENHAIN Table dimensions Ø 650 mm max. table load 500 kg spindle turning speed range 12.000 U/min drive capacity - spindle motor 15,5 / 33,0 kW rapid traverse 48 m/min tool change unit 48 Pos. SK 40 coolant IKZ 30 bar voltage 400 V total power requirement 35 kW weight of the machine ca. 10,0 t dimensions of the machine ca. 4,00 x 2,46 x 2,85 m chip conveyor 2,90 x 0,50 x 1,30 m coolant tank 2,30 x 1,70 x 0,45 m coolant pump 0,60 x 0,50 x 0,90 m Oil cooler 0,55 x 0,60 x 1,10 m 5-axis simultaneous machining center - Serial-No.: 9496-117 Rbsdpfx Ajxap Eashzjt - Control ON: 10,137 h - Spindle ON: 3,380 h - Control: HEIDENHAIN iTNC 640 - electr. handwheel - IKZ 30 bar - chip conveyor

Condition: excellent (used), Year of construction: 2014, operating hours: 66,600 h, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We offer you the following: Technical Data: Control: Heidenhain iTNC 530 HSCI Travel distances: - X-axis: 600 mm - Y-axis: 500 mm - Z-axis: 500 mm Main spindle: - Speed range: 20 - 18,000 rpm NC Rotary Table: - Clamping surface: 600 x 500 mm - Load capacity: 400 kg - B-axis: -5° to +110° - C-axis: 360° Tool changer: - Tool holder: HSK-A63 - Number of tool pockets: 210 positions Equipment and Accessories: - Heat exchanger for spindle and table - Active cooler for control cabinet - Direct measuring system - Full enclosure - 3D control - DMG ERGOline Control - Direct measuring systems in the NC rotary/swivel table incl. table cooling - BLUM NT laser tool measurement - Calibration arbor with tool holder - Infrared probe, Heidenhain TS 649 - Preparation for 3D quickSET - Hinged belt chip conveyor - ICS, 40 bar, 600 l tank, incl. rotating viewing window, sealing air, linear measurement systems, bed flushing - Rinsing pistol - Mechanical oil and emulsion mist separator - Air blast through spindle center - Mode of operation 4 - Machine preparation for handling systems, consisting of: Rbodpfxoxgnz Ts Ahzot - Automatic, lateral loading door - Electrical interface for articulated arm robot - Pneumatic control and monitoring of the zero-point clamping system - Activation/deactivation of handling system via switch on machine operator panel - Additional rinsing in the machining area included - Preparation for job management included - Operator panel arrangement on the left included - Power supply to machine table incl. 2-channel rotary union - Additional machine-side clamping hydraulics, 1 clamping circuit: - Clamping hydraulics, 1 circuit, 30 - 240 bar, pressure adjustment via proportional valve technology - Extension of rotary union to 4 channels included On-time hours: approx. 66,600 h Spindle hours: approx. 44,800 h The robot shown in the pictures is not included in the scope of delivery. The machine is expected to be available from October/November 2025. The ball screw drives and linear guides in the X and Z axes have been replaced. Accessories, depicted tools, and clamping equipment are only included if specifically mentioned in the additional information. Subject to changes and errors in the technical specifications and information. Prior sale reserved!

Condition: like new (used), Year of construction: 2022, Controller HAAS (LCD screen, 1 Gb memory, touch screen, WIFI) Table size D400 mm Table load 227 kg No of T slots 5 X travel 610 mm Y travel 406 mm Z travel 406 mm B axis tilting +120 / - 35 degree C axis rotation 0 - 360 degree Distance between the spindle and table surface 102 - 508 mm Spindle speed 15000 rpm Spindle power 22,4 kW ATC magazin 50+1-fold Toolholder HSK-A63 Rapid speed X/Y/Z 30,5 m/min Feedrate 16,5 m/min Weight 5400 kgs Machine dimensionen LxWxH 2900 x 2280 x 2520 mm Features, accessories - CTS 69 bar - Coolant unit - Extra filter system on coolant unit - Dinamical zero point shift / toolpoint programming - Intelligent over voltage protection Rjdelaxu Depfx Ahzobt - Ethernet interface - HAAS Connect, remote control - HAAS Drop (Wifi Data transfer) - High Speed machining - Media show during working by M130 - Rigid tapping - Protection from over voltage - Chip conveyor - Programmable coolant nozzles - Air through the spindle Two idencital machines are for sale. Ready to buy immediately.

Condition: ready for operation (used), Year of construction: 2002, operating hours: 37,369 h, functionality: fully functional, machine/vehicle number: 1112.000594 3, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, table width: 1,000 mm, table length: 600 mm, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Working Spindle Tool holder: SK 40 Worktable Clamping surface: 1,000 × 600 mm T-slot spacing: 63 mm Number of T-slots / size: 9 / 14 H7 Rbodpfxowx Ekxo Ahzet Tool Magazine Magazine positions (2 × 12 positions): 24 pcs Tool diameter magazine 1: 130 mm Tool diameter magazine 2: 80 mm Tool length from spindle nose: 315 mm Tool weight for automatic tool change: 8 kg Total tool weight in magazine: 100 kg Main Drive Spindle speed: 12,000 rpm Tool holder: SK 40 MACHINE DETAILS Control: Heidenhain TNC 426/430 Electrical Equipment Machine connection: 3N/PE–50/60 Hz, 400/230 V Standard current consumption: 38 A Standard power consumption: 26 kVA Standard fuse protection: 50 A Rated output: 35 UVA Transport Transport weight (machine with tool changer): approx. 6,700 kg Transport dimensions (L x W x H): approx. 3.50 x 2.70 x 2.21 m EQUIPMENT Tool changer included

Condition: ready for operation (used), Year of construction: 2004, operating hours: 9,848 h, functionality: fully functional, machine/vehicle number: 1116 000179 3, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Torque available at the spindle: see diagram in PDF Motor power at 100% duty cycle: see diagram in PDF Motor power at 40% duty cycle: see diagram in PDF Steplessly programmable spindle speed: 20–12,000 rpm Spindle speed in setup mode: 20–800 rpm Magazine stations: 30 slots Measuring System Resolution X, Y, Z axes: 0.001 mm Input increment X, Y, Z axes: 0.001 mm Positioning tolerance X, Y, Z axes: 0.010 mm Feed Drive Motors: AC brake motors for axes X, Y, Z Steplessly programmable feed rate X, Y, Z axes: 20–15,000 mm/min Rapid traverse X, Y, Z axes: 60 m/min Setup mode X, Y, Z axes: 20–2,000 mm/min NC Swivel Rotary Table Clamping surface: Ø630 mm T-slot spacing: 63 mm Rbjdpfewxybfox Ahzet Number of T-slots / Size: 9 / 14 H7 Centering bore: Ø50H6 mm Holding torque at 100% duty cycle A-axis: 3,866 Nm Holding torque at 100% duty cycle C-axis: 6,008 Nm Max. rotation of table plate A-axis: 7.3 rpm Max. rotation of table plate C-axis: 7.0 rpm Swivel range A-axis: ±45 / 30° Rotary range C-axis: n × 360° Tool holder: SK40 Operating Hours Power-on hours: 35,099 h Spindle hours: 9,848 h

Condition: excellent (used), Year of construction: 2001, x-travel 600 mm y-travel 450 mm z-travel 450 mm spindle turning speed range 16000 U/min control HEIDENHAIN TNC 430 Number of axles 5 simultan table rotating 360 ° taper ISO SK-40 table diameter 280 mm rapid traverse 30wer m/min tool change unit 30 -fach weight of the machine ca. 6,5 t dimensions of the machine ca. 3100 x 2400 x 2500 m Rbsdpfxjvwgm To Ahzot his HERMLE C600U is in very good condition and available immediately. Hours on: - Machine ON: 65'656h - Spindle ON: 28'281h Equipment & Description: - Coolant outside with 6bar 3 nozzles - Manual canopy - Electr. heat compensation - Electr. handwheel iTNC - Measuring probe HEIDENHAIN - Blum tool breakage control - Documentation / Operating instructions - NEW air filter system CABARON type: COB-H10-2 (year of construction 2012 never in use) Option: - Div. tool holders ISO SK-40, 109 pcs.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 60, 5-axis machining center with rotary table (C) and tilting head (B) The machine comes from a large operation and was maintained preventively. TECHNICAL DETAILS Travel X: 760 mm Travel Y: 560 mm Travel Z: 560 mm Control: 840 D Powerline Siemens Tool holder: SK 40 Number of tool magazine positions: 60 Spindle speed: 0–12,000 rpm Pallet size: 630 x 500 mm Feed rate: 20–15,000 mm/min Rapid traverse: 50 m/min MACHINE DETAILS Total connected load: 64.2 kVA Total power requirement: 26 kW Machine weight: 12 t Space requirements: 5.2 x 4.5 x 2.45 m Spindle hours: 20,844 h Operating hours: 58,437 h Dimensions and Weight Machine body length: 3,450 x 2,400 x 2,650 mm Machine body weight: approx. 6.50 t Tool magazine length: 2,600 x 1,000 x 2,000 mm Tool magazine weight: approx. 0.50 t Rbjdowvitxspfx Ahzst Cooling unit length: 1,850 x 1,750 x 1,500 mm Cooling unit weight: approx. 0.50 t Chip conveyor length: 3,200 x 1,000 x 1,700 mm Chip conveyor weight: approx. 0.50 t EQUIPMENT - Pallet changer with 2 pallets - Tool changer with 60 positions

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 680 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 625 mm, rotational speed (max.): 15,000 rpm, swivel angle B-axis (min.): -110 °, swivel angle B-axis (max.): 65 °, Machining center with large tool magazine with 240 slots and pallet changer for 40 units TECHNICAL DETAILS X-axis: 680 mm Y-axis: 400 mm Z-axis: 625 mm B-axis: +65º to -110º C-axis: 360º Distance pallet-spindle nose: -86 mm to 540 mm Distance pallet center-spindle nose (B-axis -90º): 60 mm to 685 mm Distance pallet center-column guide: -25 mm to 375 mm Distance spindle center-column guide: 227 mm Distance floor level-pallet surface: 1,165 mm Rjdpfswqc Ufjx Ahzjbt Control: Fanuc 16iMB Spindle details Spindle speed: 40 – 15,000 rpm Spindle taper: 7/24 steep taper #40, Big PLUS Spindle diameter: 80 mm Spindle torque: 135 Nm / 850 rpm Spindle power: 15/7.5 kW Feed and rapid traverse Rapid traverse X/Y/Z: 30 m/min B-axis: 10 rpm C-axis: 13.5 rpm Feed X/Y/Z: 1 - 15 m/min B-axis: 1 - 2,160º/min C-axis: 1 - 3,600º/min Tool and Pallet Number of tools: 240 Max. tool Ø: 80 mm Max. tool Ø with empty adjacent stations: 150 mm Max. tool length: 260 mm Max. tool weight: 8 kg Pallet changer with: 40 pallets Workpiece dimensions Max. workpiece diameter: 360 mm Max. workpiece height: 250 mm MACHINE DETAILS Year of manufacture: 2003 Commissioned: 2004 Machine weight: 11,700 kg Installation area: 4,945 x 3,655 mm Machine height: 3,210 mm EQUIPMENT - Encoders for B and C axes - Direct measuring system Heidenhain for X, Y, and Z axes - 30 l/min / 20 bar internal cooling - Scraper belt chip conveyor - Timer Power on / Power off - Measuring probe RENISHAW MP 10 Easy Probe - Laser Renishaw NC 1 - 2 MB memory - 8 additional M-functions - Number of tool corrections: 999 - Increase of workpiece coordinate systems from: 6 to 54 - Coordinate system rotation: G68/G69 - Automatic zero point tracking - Program restart

Condition: repair required (used), Fehlmann Picomax 60 M (5-axis universal milling machine) with Heidenhain TNC 426 x-axis 500 mm y-axis 350 mm z-axis 610 mm Motor spindle 18,000 rpm Power 10.2 kW 24-position tool changer Weight 3,200 kg with 4 axes SK 30 tools approx. 40 tool holders The machine has the following problems: Rbjdpfx Ahewmwrdezst - Heidenhain 430 control system is defective (booting up is not always possible, crashes during machining)

Condition: good (used), Year of construction: 2014, operating hours: 21,000 h, functionality: fully functional, DMG MORI DMU 60 Evo 5x simultaneous axis machining center (2014) Manufacturer: DMG Mori Type: DMU 60 Evo 5x simultaneous axes Year: 2014 Condition: good, used, new spindle in 2024 Operating hours: 37,063h Spindle hours: 21,313h Control: Heidenhain ITNC 530 Condition: used, ready for operation Travel x/y/z 600/500/500 mm Rapid traverse 80m/min Speed 20-14,000 rpm Tool magazine 30 Tool holder SK40 NC rotary tables 600x500mm Coolant supply 40 bar with band filter system Measuring probe TS649 Rbsdpfx Ahswp Ic Eozst Documentation

Condition: new, Year of construction: 2025, Z-MaT U630 5-Axis Simultaneous Machining Center Siemens ONE, 15" LCD screen Dual-torque direct drive Travel (X/Y/Z): 750/800/600 mm Rapid traverse (X/Y/Z): 36/36/36 mm/min Cutting feed: 1-10,000 mm/min Spindle Spindle speed: 18,000 rpm, built-in Spindle taper: HSK63 (HSK100) Spindle motor: 30 kW, Siemens Air blast through the spindle Spindle air curtain Spindle oil cooler Double-arm tool changer, 30 tools (40/60/200 optional) Max. tool weight: 8 kg Max. tool length: 300 mm mm Max. tool Ø 75/120 Table Table diameter: Ø 630 mm Max. workpiece Ø 650 mm Max. table load: 850 kg T-slot (width x number x pitch): 18H8 x 7 x 80 mm Distance from spindle center to table surface: 120-720 mm A-axis travel (tilt): +-120 ° C-axis rotation: 360 degrees Max. rapid traverse A/C axes: 60/100 rpm A/C-axis encoder Standard accessories End of operation lamp 3-color status light Electric handwheel (MPG) Work area lighting Roller linear guides Automatic lubrication system (grease) 3-axis glass scales, air-operated (XYZ) Automatic Tool changer Air gun Coolant gun Coolant tank Coolant flushing system (chip flushing) Full splash guard Transformer: 400V, 50Hz Rbodpfx Ahjwku Evezst Heat exchanger in the control cabinet Automatic shutdown Leveling bolts and blocks Tool box CE conformity Hinged belt chip conveyor Machine size and weight Machine dimensions (L x W x H): 2728 x 3760 x 3726 mm Machine weight: approx. 19,500 kg Subject to error and prior sale A wide range of automation options are available

Condition: ready for operation (used), Year of construction: 2013, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: 7194NV502130518J, travel distance X-axis: 600 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 6 m/min, feed rate Y-axis: 6 m/min, feed rate Z-axis: 6 m/min, controller manufacturer: Mitsubishi, controller model: MAPPS IV, spindle speed (max.): 13,000 rpm, operating hours of spindle: 100 h, coolant supply: 15 bar, spindle motor power: 15,000 W, number of slots in tool magazine: 30, mount diameter: 40 mm, Equipment: chip conveyor, rotational speed infinitely variable, For sale is a DMG MoriSeiki NV5060. Machine can be inspected under power at any time. Rbodpfx Asvccmyohzst

Condition: used, Year of construction: 2012, x-travel 630 mm y-travel 800 mm z-travel 750 mm Rjdpfjvxwxvsx Ahzjbt control SIN 840D sl Siemens B - axis 360 x 0,001 ° A - axis -200 -- +25 x 0,001 ° spindle turning speed - stepless 20 - 18.000 U/min power capacity at 100 % load 28,00 kW power capacity at 40 % load 34,00 KW max. torque at 40% / 100% load 110 / 84 Nm tool taper HSK 63 feed X/Y/Z/-axis 1 - 100.000 mm/min rapid traverse X/Y/Z 100,00 m/min feed capacity X/Y/Z 9 / 6 / 9 kN feed B-axis 1 - 14.400 °/min feed A-axis 1 - 7.200 °/min size of pallet 2x 500 x 500 mm workpiece weight max. 400 kg max. workpiece diameter 800 mm workpiece height max. 800 mm tool magacine with 63 diameter of tools max. 280 mm tool length - max. 550 mm weight of tools max. 15,00 kg total power requirement 65,00 kW weight of the machine ca. 14,00 t dimensions of the machine ca. 5,50 x 3,50 x H3,20 m 5-axis machining center with SIEMENS SINUMERIK 840D sl control, mechanical tool breakage control, emulsion mist separator, without chip conveyor and without coolant system.

Condition: ready for operation (used), Year of construction: 2002, operating hours: 28,384 h, functionality: fully functional, machine/vehicle number: 15594, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, swivel angle A-axis (min.): -90 °, swivel angle A-axis (max.): 20 °, TECHNICAL DETAILS Control: Heidenhain iTNC 530 X-axis: 600 mm Y-axis: 450 mm Z-axis: 450 mm A-axis rotation range: +20° / -90° C-axis rotation range: 360° Rotary table diameter: 280 mm Spindle data Spindle mount: HSK A 63 Tool changer: 30 positions Feeds and speed Feed range: 1 - 30,000 mm/min Rapid traverse speed: 35 m/min MACHINE DETAILS Machine weight: approx. 6,500 kg Control switch-on time: 64,299 h Machine switch-on time: 61,676 h Redpfxsvytgfj Ahzobt Program run: 29,320 h Spindle hours: 28,384 h Drive hours: 37,893 hours

Condition: ready for operation (used), Year of construction: 2000, operating hours: 14,430 h, functionality: fully functional, machine/vehicle number: 13479, travel distance X-axis: 875 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 300 kg, rotary table diameter: 500 mm, spindle speed (max.): 7,000 rpm, Machine can be shipped free of charge for €1,850 net! TECHNICAL DETAILS Control: Heidenhain TNC 410 Travel X / Y / Z: 875 / 500 / 500 mm Quill stroke: 75 mm Table NC rotary table: 500 mm C-axis: 360° B-axis: ± 30° Speed: 11 rpm Resolution: 0.001° Part accuracy: ±15'' Rodovn Si Ispfx Ahzjbt Table load: 300 kg Drive Drive power (100% / 40% duty cycle): 7.5 / 11 kW Torque (100% / 40% duty cycle): 266 / 390 Nm Speed: 20 - 7,000 rpm Vertical milling head Quill stroke (vertical and transverse): 75 mm Swivel range: 0 - 90° Feed drives Feed forces X, Y and Z: 8,000 N Rapid traverse: 15 m/min Diameter and pitch of the feed spindles: 32 / 10 mm Measuring system Direct position measuring system, resolution: 0.0001 mm Position tolerance Tp in X-Y-Z axis according to VDI/DGQ 3441: 0.010 mm Tool system Spindle cone: SK 40 (similar to DIN 2079, for tool holders according to DIN 69871 A) Number of tool positions: 16 pieces Tool diameter: 80 mm Tool diameter with free adjacent positions: 100 mm Tool length: 250 mm Tool weight: 6 kg MACHINE DETAILS Operating voltage: 400 V / 50 Hz Total power: 14 kVA Weight: 4,800 kg Dimensions: 3.0 x 2.3 x 2.2 m Control switch-on time: 50,052 h Program run: 15,142 h Spindle switch-on time: 14,430 h Coolant system Tank capacity: 120 l Flow rate at a flow pressure of 3 bar: 24 l/min

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 400 mm, swivel angle B-axis (min.): -100 °, swivel angle B-axis (max.): 100 °, TECHNICAL DETAILS Travel range X/Y/Z: 650 x 550 x 400 mm Travel range B: ±100° Travel range C: infinite Distance 320 mm pallet to spindle nose: 500 mm Distance faceplate to spindle nose: 600 mm MACHINE DETAILS Control cabinet weight: 300 kg Max. workpiece weight: 200 kg Machine dimensions (W x H x D): 2200 x 2830 x 2360 mm Machine weight: 7,000 kg Cooling unit weight (empty): 215 kg Space requirement (L x H x W): approx. 4,000 x 2,900 x 4,900 mm Operating hours: 39,100 h Machine power consumption: 30 kVA Operating voltage: 3x400 VAC - 50 Hz Dust extraction: 2.2 kVA Power consumption cooling unit: 7.7 kVA Total connected load: 39.9 kVA Compressed air according to ISO 8573.1: 7 bar Max. particle size: 1 µm Max. particle concentration: 1 g/m³ Rodow T Th Tjpfx Ahzobt Max. pressure dew point: +3°C Max. oil content: 1 mg/m³ Air consumption: 500 l/min Transport and storage temperature: +5°C to +55°C Operating temperature: +18°C to +30°C

Condition: new, Year of construction: 2024, functionality: fully functional, controller manufacturer: Heidenhain, controller model: TNC 640, General Spindle: direct drive Speed: 12,000 rpm Power: 34 kW Torque: 180 Nm Tool holder: SK 40 Tool changer: 60 stations Working area Travel path X: 620 mm Travel path Y: 520 mm Travel path Z: 460 mm Rotary/swivel table: D= 650 mm Table load: 300 kg C-axis: resolution 0.001 degrees Other Rapid traverse X/Y/Z: 36 m/min Max. speed B-axis: 25 rpm Max. speed C-axis: 25 rpm Equipment Chip management: chip conveyor Rsdpfxovyp Dms Ahzsbt Workpiece measurement: Renishaw OMP 40 Automation: prepared