Used Centers (universal) 600-699mm (x-travel) for sale (97)

Condition: used, Year of construction: 2007, x-travel 1.350 mm y-travel 1.150 mm z-travel 895 mm table diameter 4.590 x 6.990 x 3.150 mmmm handwheel el. tool adaptor HSK-A63 turning speeds 24.000 U/min engine output 38 kW table weight 1.600 Kg 92 fach Control HEIDENHAIN iTNC 530 a-axis A +16/-120 c-axis 360 ° weight of the machine ca. 14.000 kg dimensions of the machine ca. 4.590 x 6.990 x 3.150 mm Hedpfx Asxddttefijfn

Condition: good (used), Year of construction: 2018, Internal item no.: 25043 5-Axis CNC Machining Center POSmill H 500 U Year: 2018 Just approx. 1,000 spindle hours since spindle replacement Machine total approx. 20,500 hours Hfodpfxswz I Acs Afien Spindle replaced in 2024 (18,000 rpm) Geometry realigned in 2024. Travel axes: X 650 / Y 850 / Z 500 mm Rotary table: 360° infinite Control: Heidenhain iTNC 530 Spindle: 18,000 rpm Spindle interface: HSK-A63 The machine is equipped as follows: 60-position tool changer Through-spindle coolant (20 bar) with belt filter system Compressed air through the spindle Kessler rotary table, diameter 500 mm Infrared 3D part measurement probe Tool measurement via BLUM laser Rotating inspection window POS DCM collision module Mobile electronic handwheel Oil mist extraction system Heidenhain linear measurement system X, Y, Z Purge air for all linear measurement systems Active control cabinet air-to-air cooler Active cooling for 4th + 5th axis, controlled Network connection + USB port Controlled spindle cooler Heidenhain rotary measuring system Contour protection POSkontur External hinge belt chip conveyor Coolant pump at the head, operated via M-functions Pump for chip flushing device Chip flushing device Machine status indicator light Spindle air purge Electromechanical oil/coolant separator Automatic coolant level monitoring 3-fold media interface in the center of the table Hydraulic unit incl. control via M-function Connected load: 60 kVA Installation dimensions: W 4800 / D 4600 / H 3000 mm + Through-spindle coolant unit (LxWxH): 2200 x 1300 x 1400 mm Weight: approx. 13,000 kg The machine is in very well-maintained condition and comes from a small, family-run business. In 2024, the spindle was replaced and the geometry was set (guides repaired and adjusted). Since then, the machine has seen only minimal use.

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 5 h, functionality: fully functional, travel distance X-axis: 620 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, controller manufacturer: Heidenhain, controller model: iTNC-640, table load: 300 kg, rotary table diameter: 650 mm, spindle speed (max.): 15,000 rpm, operating hours of spindle: 1 h, coolant supply: 40 bar, tool length: 250 mm, tool diameter: 75 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 5-axis machining center with extensive equipment: Milling spindle with 15000 RPM and water cooler Direct measuring system in the A and C axes Direct measuring system in the linear axes (Heidenhain glass scales) Tool changer with 60 places Machine closed at the top and opening for crane loading Comfort side door Hinged belt chip conveyor with chip cart Air cooling through the spindle Coolant through the spindle 40 bar Paper belt filter Tub flushing Oil separator Pneumatic cutting point for rotary feed-through in the table Heidenhain TS 740 touch probe with AXISET software Hjdpfx Afst H Ihajijfn Tool measurement with Renishaw NC-4 "split type" laser 4-fold rotary feed-through in the machine table for air to actuate the clamping devices

Condition: used, x-travel 650 mm y-travel 450 mm z-travel 460 mm Hsdewr Ev Ujpfx Afiofn Control Fanuc 16iMB max. turning speeds 12.000 min/-1 tool taper MAS BT40 number of tool places 20 Pos. Number of axes 3+2 In our opinion, the machine is in good used condition and can be inspected under power by appointment. There are 4 identical machines available. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2001, Deckel Maho DMC 60U Hi-dyn Machining Center Condition: Used Year of manufacture: 2001 Power-on hours: 56,376 Spindle hours: 26,451 Technical data: Speed: 18,000 rpm Equipment: - MillPlus control - 60-position tool changer - 2–3 pallets - 2-station pallet changer Hedpsu Rnlusfx Afiefn - Universal head

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller model: Heidenhain MillPlus, spindle speed (max.): 12,000 rpm, Machining center with measuring probe! TECHNICAL DETAILS Hfedpexb Rqmefx Afion X travel: 630 mm Y travel: 560 mm Z travel: 560 mm Number of axes: 4 Table size: 1000 x 600 mm Spindle speeds: 12,000 rpm Rapid traverse: 30 m/min Tool changer: 24 positions MACHINE DETAILS Control: Heidenhain MillPlus

Condition: ready for operation (used), Year of construction: 2004, operating hours: 48,702 h, functionality: fully functional, machine/vehicle number: 16261, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller model: Siemens Sinumerik 840 D pl , spindle speed (max.): 28,000 rpm, TECHNICAL DETAILS Travel Paths X-axis travel: 650 mm Y-axis travel: 600 mm Z-axis travel: 500 mm Main Spindle Spindle speed range: 20 – 28,000 rpm Spindle drive power: 23 / 18 kW Max. torque: 79 Nm Tool taper: HSK-A63 NC Rotary Swivel Table Clamping surface: Ø 630 mm Swivel range A: +30° / -115° Rotatable C: 360° Max. table load: 500 kg Max. workpiece dimensions: Ø 630 x 313 mm Table rotation speed A: 25 / C: 65 rpm Tool Changer Number of tool stations: 117 Max. tool diameter: 90 mm Max. tool length: 300 mm Feed Rates Rapid traverse (X / Y / Z): 60 m/min Acceleration: 10 m/s² Feed force: 8.5 kN Hedpfexbz A Hox Afiofn MACHINE DETAILS Control: Siemens Sinumerik 840 D pl Space Requirement & Weight Required space approx.: 8.5 x 5.5 x 3.0 m Machine weight approx.: 10,500 kg Total power requirement: 43 kVA Operating hours: 48,702 h EQUIPMENT - Documentation - High-pressure cooling - Coolant system - Internal coolant supply: 80 bar / 1,300 l - Electronic handwheel - Fully enclosed cabin - FASTEMS pallet pool / 15 positions - Chip conveyor - Paper band filter - Renishaw probe - Tool breakage monitoring Note: Transport lifting gear must be provided by the buyer. The pallet system cannot be observed under power. The Fastems controller is defective.

Condition: new, Year of construction: 2024, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,400 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, New machine with completion date 02/2024 HDC3000 with 6 axes - travel X=3000 mm, Y=1500 mm, Z=1400 mm - Heidenhain iTNC 640 with handwheel - NC rotary table for 5-sided machining 1250 mm x 1600 mm - 2-axis NC universal drilling and milling head, fully simultaneous and positioning operation Hjdpfx Asxbpuwjfijfn - Spindle 10,000 rpm HSK100, S1=220 Nm spindle torque - HSK100 tool changing system / 60 places - 800 mm long tools - Chip conveyor - optimized for 5-sided machining incl. deep-hole drilling - Coolant supply - Internal / external air blow-off device - IKZ 60 bar for deep hole machining - Full enclosure - Large interference circle 2300 mm - incl. fixators - incl. washing gun - incl. warranty - Short delivery time, subject to prior sale

Condition: good (used), Year of construction: 2000, 20000 rpm, Hfodpfxjr Urm Ss Afisn tool measurement on table will come, Parts shown by hand not come.

Condition: used, Year of construction: 2018, x-travel 620 mm y-travel 520 mm z-travel 460 mm c-axis 360 ° b-axis -50 / +110 ° distance spindle nose and table 170 - 630 mm CNC-control iTNC 640 HEIDENHAIN Table dimensions Ø 650 mm max. table load 500 kg spindle turning speed range 12.000 U/min drive capacity - spindle motor 15,5 / 33,0 kW rapid traverse 48 m/min tool change unit 48 Pos. SK 40 coolant IKZ 30 bar voltage 400 V total power requirement 35 kW weight of the machine ca. 10,0 t dimensions of the machine ca. 4,00 x 2,46 x 2,85 m chip conveyor 2,90 x 0,50 x 1,30 m coolant tank 2,30 x 1,70 x 0,45 m coolant pump 0,60 x 0,50 x 0,90 m Oil cooler 0,55 x 0,60 x 1,10 m 5-axis simultaneous machining center - Serial-No.: 9496-117 Hfedpfx Asxap Easfijn - Control ON: 10,137 h - Spindle ON: 3,380 h - Control: HEIDENHAIN iTNC 640 - electr. handwheel - IKZ 30 bar - chip conveyor

Condition: excellent (used), Year of construction: 2000, TECHNICAL DETAILS CNC Control: HEIDENHAIN TNC430 X axis travel (mm): 600 Y axis travel (mm): 450 Hfjdsxak A Hepfx Afien Z axis travel (mm): 450 A axis travel (mm): +/- 110 C axis rotation (degrees): +/- 360 Number of pallets: 1 Table dimensions (mm): - Table load capacity (kg): - Cutting feedrate (X, Y, Z) (mm/min): 20,000 Rapid traverse (X, Y, Z) (m/min): 35.0 Main spindle speed (rpm): 50 - 10,000 Spindle power (kW): - Spindle taper type: ISO SK40 Spindle torque (Nm): - Tool magazine type: Chain Tool magazine capacity (positions): 30 Max. tool diameter (mm): - Max. tool diameter (adjacent pots empty) (mm): - Max. tool length (mm): - Max. tool weight (kg): - Coolant tank capacity (l): - Through spindle coolant (bar): - EQUIPMENT EROWA MTS Zero Point Clamping System: Included RENISHAW OMP60 Probe / Through spindle cooling: Included MACHINE DIMENSIONS Length (mm): 2,130 Width (mm): 2,300 Height (mm): 2,750 Weight (kg): 6,500

Condition: good (used), Year of construction: 2006, operating hours: 119,571 h, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45,000 m/min, rapid traverse Y-axis: 45,000 m/min, rapid traverse Z-axis: 45,000 m/min, controller model: Siemens 840 D, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hermle C30 U Siemens 840D Machine ON: 119,571 h, Spindle ON: 56,792 h Hsdoxcp Srepfx Afiofn - Spindle HSK-A63 10,000 rpm - 32 tool stations - Rotary table SRT 280 mm with integrated clamping system HSK100 (if not needed, it can be covered or alternatively converted to a zero-point clamping system) - External coolant supply - Internal coolant supply with 80 bar paper band filter - Chip flushing gun - Chip conveyor - Handheld control module - Automatic cabin door - 32 tool stations plus 87 additional stations ZM87 - Thermal compensation - BLUM tool measurement on the side - Renishaw probe - Chip container - Status light The machine has been thoroughly inspected and comes with a geometry report as well as circularity test measurements. The machine can be viewed and tested under power at any time. Very well-maintained condition.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 17,050 h, General Data Machine weight 20000 kg Main Drive Spindle speed range 18000 Number of axis 5 Movement X-Axis Movement 670 mm Hfodpew Ulzujfx Afien Y-Axis Movement 830 mm Z-Axis Movement 600 mm Media Chip conveyor Yes Additional Equipment Wear-related spindle replacement Inspection under power possible This 5-axis POSmill H 800 U was manufactured in 2012. It features a Heidenhain iTNC 530 control, a new spindle with 5,600 hours since 2021, and a robust 18,000 rpm spindle speed. The machine offers extensive travel with dimensions of 670/830/600 mm and supports 96 tool positions. Additional features include an internal coolant supply at 60 bar, a comprehensive coolant system, and a chip conveyor. Consider the opportunity to buy this POSmill H 800 U universal machining centre. Contact us for more information. Application Types Milling

Condition: used, Technical details: vertical rapid adjustment: z-Achse: 1125 mm horizontal adjustment: x-Achse: 600 (+1000 elektrisch-manuell) mm cross adjustment: Frässupport y-Achse: 325 (340) mm control: Siemens 840D diameter of clamping surface: 3500/5800 mm turning diameter: max.6000 mm range of revolution per miute: Planscheibe: 1 - 12 U/min revolution per minute: Frässpindel: 1000-6000 U/min max. workpiece diameter on pallets: 6000 mm workpiece weight: 10 - 2000 kN tool taper: HSK-A-100 total power requirement: 120 kVA weight of the machine ca.: 35,0 t Annular Ring and Cylinder Machining Center Vertical special CNC machining center Hjdpfou Idlfox Afisfn application: for turning-drilling and milling, grinding of annular parts (large gears, roller slewing rings, gear rims, special flanges, etc.) machine consists of two separate main groups: column unit and face plate/table unit - Feed drives via AC servomotors - cross adjustment milling support z-axis 325 (max.340) mm - Drive power of the faceplate drive 76 kW - Positioning of the table = 0,02mm What was renewed: - Axle motors were renewed (Siemens) - Central lubrication for large-diameter antifriction bearings of the turntable/spindle has been extended - partly the machine cabling - bladder accumulator and the safety valve i.D. *

Condition: excellent (used), Year of construction: 2021, Used 5-axis machining center Haas UMC-500SS with Lang automation Year of manufacture 2021 X-axis 610 mm Y-axis 406 mm Z-axis 406 mm Spindle nose to clamping surface (~ max.) 508 mm Spindle nose to clamping surface (~ min.) 102 mm Max. rated power 22.4 kW Max. speed 00 rpm Max. torque 122.0 Nm by 2000 rpm Drive system Inline Direct-Drive Cone CT40 Bearing lubrication Air / Oil Injection Cooling Liquid Cooled Table Clamping surface diameter 400 mm Max. load capacity on clamping surface 226.8 kg Width of T-slots 16.00 mm Number of T-slots in basic configuration 5 Center distance of T-slots 63 mm Tool changer 50+1 Tools IKZ 21 bar Hinge belt chip conveyor Programmable coolant nozzle Compressed air flow through the tool Additional coolant filter system Rotary feedthrough 4 channel Pneumatic Automation by Lang RoboTrex 96 automation system Complete robot automation including housing, interface for automatic gripper change, 2 carriage feed systems and 1 automation carriage excl. gripper Robo-Trex 96 change gripper with pneumatic interface for Clamping tower 64500 suitable for automatic. Gripper change including sensors for part recognition, clamp removal and clamp monitoring RoboTrex 52 automation trolley 30 storage locations max. part size x x 100 mm 4-trolley version for Robo-Trex 52 + 96 (including 2 additional trolley feeders, adapted housing) Extension of trolley allocation Robo-Trex Pneumatic support control (only pneumatic clamping towers) Robo-Trex 52 change gripper with pneumatic interface for clamping tower 66600 suitable for automatic. Gripper change including sensors for part recognition, clamp removal and clamp monitoring RoboTrex 52 automation trolley 30 storage locations max. part size x x 100 mm RoboTrex 96 automation clamping tower pneumatically operated Ø 246 x 80 mm, including hand interface and mounting bolt Ø 20 mm RoboTrex 52 automation clamping tower pneumatically operated, prepared for automatic change Ø 157 x 210 x 68 mm, including hand interface and mounting bolt Ø20 mm Quick-Point 96, round plate Ø 246 x 27 mm, for 63 mm slot spacing Makro-Grip 77 Night King length 130 mm, clamping range mm (PU = 2 x 5 pieces) pcs. Machine is still under power and can be inspected in the Villingen-Schwenningen area by arrangement. Hfjdpfx Aevcb R Djfien The buyer takes care of loading and transport. We can organize the removal and loading for you. Technical data, accessories and description of the machine are non-binding.

Condition: good (used), Year of construction: 2008, operating hours: 32,500 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller model: Heidenhain, spindle speed (min.): 20,000 rpm, operating hours of spindle: 2,300 h, coolant supply: 40 bar, spindle motor power: 16 W, spindle nose: HSK-A 63, number of slots in tool magazine: 75, tool length: 220 mm, Equipment: chip conveyor, rotational speed infinitely variable, Machine in very good condition and currently still in use. All maintenance has been carried out by the manufacturer, last service in March 2025. 7-position EROWA UPC 320mm pallet changer BLUM tool measurement 600L coolant tank with band filter Spindle hours: 2300h (completely overhauled) Hfjdjxbfzyjpfx Afisn High-pressure coolant (IKZ) with 40 bar coolant and air Coolant pump for IKZ recently replaced Including SARA 2 oil mist extraction Transport and commissioning can be organized All functions can be tested under cutting conditions!

Condition: good (used), Manufacturer KITAMURA Type Mytrunnion-4G Hsdpfx Afor Eqxnsisfn Year of construction 2015 Control Arumatik-Mi Machine weight approx. 9.000 Tool holder HSK 63A x-path 610 mm y-path 610 mm z-path 500 mm speed range 40-15.000,- 1/min max. table load 200 kg Space requirement approx. 3,725 x 2,198 x 2,876 mm Table size 400 x 400 mm Number of tools in the magazine 60 places Internal coolant supply 30 bar A-axis - 120 +30° Resolution C-axis 0 - 360 ° 5 axes simultaneously

Condition: good (used), Year of construction: 2004, operating hours: 109,078 h, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45,000 m/min, rapid traverse Y-axis: 45,000 m/min, rapid traverse Z-axis: 45,000 m/min, controller model: Siemens 840 D, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hermle C30 U Siemens 840D Machine HOURS: 109,078 h Spindle HOURS: 22,117 h - Spindle HSK-A63 10,000 rpm - 32 tool pockets - Rotary table SRT 280 mm with integrated clamping system SK50 (if not required, this can be closed or alternatively converted for use as a zero-point clamping system) - External coolant supply - Internal coolant supply with paper band filter, 80 bar Hedjxcp Sljpfx Afijfn - Swarf flushing pistol - Chip conveyor - Handheld control unit - Automatic cabin door - 32 tool pockets plus 87 additional ZM87 positions - Thermal compensation - BLUM tool measurement on carriage - Renishaw probe - Chip container - Status indicator light The machine has been thoroughly inspected, and there is a geometry inspection protocol as well as circularity test measurements available. The machine can be viewed and tested under power at any time. Very well-maintained condition.

Condition: ready for operation (used), Year of construction: 2017, General Data Measurements width 3000 mm Measurements depth 2300 mm Measurements height 2700 mm Machine weight 9600 kg Control Unit Brand HEIDENHAIN Model TNC 640 Main Drive Number of spindles 1 Spindle speed range 20000 rpm Tool taper SK40 Number of axis 5 Movement X-Axis Movement 600 mm Y-Axis Movement 500 mm Z-Axis Movement 500 mm Media Chip conveyor Yes Additional Equipment Chip conveyor, coolant system, tool chain magazine, internal coolant supply, extended chip flushing, rotating viewing window, mist separator, blast air, optical measuring probe, tool breakage control, flushing gun, 3D control, NC swivel rotary table, preparation for handling system, signal light, electronic handwheel, screen display. Optional accessories for sale: 48x aluminum clamping plates (own construction); 48x vices HSG5 from Ceratizit (WNT), 5x shelves (own construction), tools and holders This 5-axis DMG MORI DMU 60 EVO was manufactured in 2016. It features a Heidenhain iTNC 640 control, a spindle speed of 20000 rpm and 120-fold tool change. The machine includes a chip conveyor, coolant system, and an internal coolant supply of 40 bar. Ideal for complex machining tasks, the DMU 60 EVO represents a robust addition to any workshop. For more information about this vertical machining centre, please reach out to us. Application Types Milling Hsdpfx Afew S N Igeijfn

Condition: used, Year of construction: 2004, x-travel 3.000 mm y-travel 1.000 mm z-travel 860 mm Control Heidenhain iTNC-530 table-size 3.600 x 1.050 mm T-slots 7 x 18 T - slots distance 125 mm distance table - lower edge spindle 25-366 mm table weight 4.200 Kg b-axis +-105 ° c-axis +-360 0 rapid travel x/y/z 30.000 mm/min rotary table Durchm. 1.000 mm max. turning diameter 1.400 mm Hsdpfx Ajwqr Nlefijfn number of spindle speeds 9.000 U/min/rpm tool taper ISO-50 DIN 69871-AD spindle drive 28,5 kW max. torque on the spindle 240 Nm tool change unit AITEK, 40 fach 20 handwheel Ink. Shuttle operation Inkl Chip coveyor Ink. Internal cooling system 20 bar total power requirement 65 kW weight of the machine ca. 24,8 t dimensions of the machine ca. 8.056 x 5.496 x 3.790 mm

Condition: good (used), travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, Manufacturer: EMCO Type: MAXXMILL 500 new 2014 Control system: SIEMENS 840D Year of construction: 2014 High preformance spindle 34,5 kW and 110 Nm torq One setup to machine 500 x 500 x 475 mm (5 sides) Hedpfx Afjtw Rnfeisfn Top machine for medium production runs 15 to 300 pieces 3560 Spindle hours Specifications Metric US Standard X - axis 650 mm Y - axis 550 mm Z - axis 500 mm A - axis -100 to +100 ° B - axis 360.000 ° Table length 600 mm Table width 600 mm Table load 250 Feed X - axis 30000 mm/min. Feed Y-axis 30000 mm/min. Feed Z-axis 30000 mm/min. Tool holder ISO 40 ISO/Bt/Mk Spindle power 34 kW kW Spindle speed 10000 rpm Tool changer 30 IKZ 20 Number of controlled axes 5 Chip conveyor Yes Cooling device Yes Dimensions (estimate) Length 2900 mm width 3300 mm height 3000 mm weight 9200 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 400 mm, swivel angle B-axis (min.): -100 °, swivel angle B-axis (max.): 100 °, TECHNICAL DETAILS Travel range X/Y/Z: 650 x 550 x 400 mm Travel range B: ±100° Travel range C: infinite Hfjdpsw T Th Tofx Afien Distance 320 mm pallet to spindle nose: 500 mm Distance faceplate to spindle nose: 600 mm MACHINE DETAILS Control cabinet weight: 300 kg Max. workpiece weight: 200 kg Machine dimensions (W x H x D): 2200 x 2830 x 2360 mm Machine weight: 7,000 kg Cooling unit weight (empty): 215 kg Space requirement (L x H x W): approx. 4,000 x 2,900 x 4,900 mm Operating hours: 39,100 h Machine power consumption: 30 kVA Operating voltage: 3x400 VAC - 50 Hz Dust extraction: 2.2 kVA Power consumption cooling unit: 7.7 kVA Total connected load: 39.9 kVA Compressed air according to ISO 8573.1: 7 bar Max. particle size: 1 µm Max. particle concentration: 1 g/m³ Max. pressure dew point: +3°C Max. oil content: 1 mg/m³ Air consumption: 500 l/min Transport and storage temperature: +5°C to +55°C Operating temperature: +18°C to +30°C

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, CNC machining center, make: DECKEL MAHO, model: DMU 60 MONO BLOCK, year: 2008, serial number: 1158006573/71.499.109, spindle SK-40, 12 kW, 12,000 rpm, with chip conveyor, oil mist extraction, CNC control HEIDENHAIN iTNC 530, rotary table as axis, 600 mm diameter, 41 kVA, indicated operating hours approx. 45,656.5/17,210.94 hrs, fleece filter unit, table size approx. 800 x 600 mm, internal rotary table size approx. 580 mm, as fourth axis, vertical milling head. Hfedpfew Tdlcex Afijn

Condition: good (used), Year of construction: 2004, operating hours: 77,711 h, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45,000 m/min, rapid traverse Y-axis: 45,000 m/min, rapid traverse Z-axis: 45,000 m/min, controller model: Heidenhain iTNC530, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hermle C30 U Siemens 840D Machine ON: 77,711 h | Spindle ON: 16,294 h - Spindle HSK-A63, 10,000 rpm - 32 tool positions - Rotary table SRT 280 mm with integrated clamping system SK50 (can be closed off if not needed or converted for use as a zero-point clamping system) - External coolant supply Hfjdpfx Afexcp R Isisn - Internal coolant supply with 80 bar paper band filter - Chip flushing gun - Chip conveyor - Handheld control module - Automatic cabin door - 32 tool positions plus 87 additional positions (ZM87) - Thermal compensation - BLUM tool measurement (probe on machine column) - Renishaw measuring probe - Chip container - Status beacon The machine has been thoroughly inspected; a geometry protocol and circularity test measurements are available. The machine can be viewed and tested under power at any time. Very well-maintained condition.

Condition: used, Year of construction: 1998, operating hours: 20,086 h, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller model: Heidenhain TNC430, workpiece weight (max.): 250 kg, table width: 540 mm, table length: 540 mm, overall weight: 8,000 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 15,000 rpm, operating hours of spindle: 20,086 h, coolant supply: 3 bar, spindle nose: ISO 40 (DIN69871), number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, This Hermle C800 U has been taken out of production in working order and can also be viewed in our showroom in working order. Comes standard with machine feet, LANG clamping table for centre clamps, documentation. Swivel range; 20° to the machine / 90° against the machine at 250 kg. Coolant reservoir capacity 300L (40 L/min at 3 bar) Hfsdev Ikucjpfx Afisn Machine dimensions; 2.70x2.21x2.93 (LxWxH) Weight approx. 7500 kg