Used Dmu 100 Evo for sale (205)

Condition: good (used), Year of construction: 2003, functionality: unexamined, machine/vehicle number: 11140003483, travel distance X-axis: 1,060 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, nominal power (apparent): 30 kVA, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, total height: 2,500 mm, total length: 4,000 mm, total width: 4,000 mm, table width: 795 mm, table length: 1,500 mm, rotary table diameter: 800 mm, overall weight: 8,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 15,103 h, number of slots in tool magazine: 32, mount diameter: 40 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 50 A, DECKEL MAHO DMU 100 T Universal Machining Center - Positioning speed X/Y/Z: 20 - 2000 mm/min - Measuring system resolution X/Y/Z: 0.001 mm Gbodpjzxzk Ejfx Ak Uot - Positioning accuracy X/Y/Z: 0.010 mm - Tool holder: SK 40 - Max. tool diameter when all positions in magazine 1 are occupied: 130 mm / magazine 2: 80 mm - Max. tool length from spindle nose: 315 mm - Max. tool weight for automatic tool change: 8 kg - Max. total tool weight in magazine: 160 kg - NC rotary table integrated into the fixed table - Number of T-slots: 14 / H 12 mm - Dovetail guide / one: 14 / H 7 mm - Distance between T-slots: 63 mm - Permissible load on the worktables: fixed table: 800 kg, rotary table: 500 kg - Includes the tool holders located in the tool changer Note: The machine can be transported on a truck up to 3000 mm wide! FCA D-72589 Westerheim - loaded onto a truck.

Condition: excellent (used), Year of construction: 2014, operating hours: 16,000 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: TNC 530 HSC, overall weight: 10,000 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 3,000 h, coolant supply: 40 bar, spindle nose: HSK 63, number of spindles: 1, number of slots in tool magazine: 60, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, 5-Axis Universal Machining Center DMG Deckel Maho DMU 60 EVO Year of manufacture: 2014 Control system: Heidenhain TNC 530 HSCi Operating hours: 16,000 h Spindle hours: approx. 3,000 h – spindle was replaced in 2025 Gbedpfxezut Inj Ak Uot Technical data: Spindle speed: 10 - 18,000 rpm Drive power: Spindle torque: Tool holder: HSK 63 Number of magazine positions: 60 Coolant through spindle – IKZ: 40 bar Travel distances: X-axis: 600 mm Y-axis: 500 mm Z-axis: 500 mm A-axis: -10 / +110° B-axis: 0.001° Accessories: - Knoll coolant system 40 bar with paper band filter - Spindle oil cooler - Chip conveyor - 3D probe - Blum laser

Condition: good (used), Year of construction: 2007, operating hours: 48,000 h, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller manufacturer: Heidenhain, controller model: MillPlus, overall weight: 10,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 17,800 h, coolant supply: 40 bar, spindle nose: SK40, number of slots in tool magazine: 60, input voltage: 400 V, type of input current: AC, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Godpezk E U Ssfx Ak Usbt

Year of construction: 2003, condition: used, A Deckel Maho 5-axis CNC milling machine in need of repair is offered. Travel X/Y/Z: 1080mm/710mm/710mm, NC-mounted rotary table C-axis X/Y: 800mm/620mm, swiveling milling head B-axis: 90°, max. spindle speed: 12000rpm, tool taper: SK40, tool positions: 32, control: Heidenhain iTNC 530, control-on hours: 75100h, program run hours: 24720h. Equipped with internal air blast supply, external coolant supply, Heidenhain infrared touch probe, Heidenhain electronic handwheel, Rotoclear rotating inspection window, chip conveyor, oil mist extraction system, coolant system with paper band filter, chip flushing gun, work area light and clamping support next to the mounted rotary table for longer workpieces. The milling head clamping system is leaking, but the machine is still operational. An on-site inspection is possible. Gbodpfx Akezwfq Hs Ujt

Condition: ready for operation (used), Year of construction: 2003, operating hours: 93,500 h, travel distance X-axis: 1,180 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 430, number of axes: 5, This 5-axis DECKEL MAHO DMC 100 T was manufactured in 2003. It features X, Y, Z travels of 1,180 mm, 710 mm, and 710 mm respectively, a SK40 tool magazine with 32 positions, internal coolant supply, and a chip conveyor. Consider the opportunity to buy this DECKEL MAHO DMC 100 T vertical machining centre. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Internal coolant supply • Chip conveyor Extra Information The machine is mounted on a beam and has not been connected to the mains since November 2025!The buyer purchases the item subject to the exclusion of any liability for material defects!The spindle was replaced in 2022 for approximately 20,000.00 euros!The spindle has clocked up only approximately 1,400 hours since then Gbodpfx Akjx T Dgno Ust Technical Specification Through-spindle Coolant Yes

Condition: used, Year of construction: 2006, Milling machines Travel distance X: 500 mm Travel distance Y :450 mm Travel distance Z: 400 mm Number of axis: 5 milling machine / machining center Control: Heidenhain iTNC 530 table size X: 500 mm table size Y: 380 mm tool changer: 30 - time control Heidenhain Machining center - Universal Rotary table (B / C axis) Swivel milling head (B axis) Gbedozwqvhjpfx Ak Uot HSK63 tool holder Cooling unit Rotary table: C-axis +/-360°, B-axis 108° Max. table load: approx. 500 kg Speed range - main spindle: 20 - 18,000 rpm Feed rates: 20 - 50,000 mm/min Machine weight approx.: 6.0 tons Machine dimensions approx.: 3.8 x 3.2 x 2.5 meters

Condition: good (used), Year of construction: 2011, functionality: fully functional, Discover the used 5-axis machining center DECKEL MAHO DMU 60 eVo, manufactured in 2011. This machine is equipped with a Siemens control system and, thanks to features such as internal cooling, a measuring probe, and laser measuring, offers the highest precision for complex manufacturing tasks. A very well-maintained and immediately ready-for-use machining center for demanding users. Technical data of the Deckel Maho DMU 60 eVo: Travel in X-axis (mm) 650 Travel in Y-axis (mm) 500 Travel in Z-axis (mm) 500 Travel in B-axis -5/+110 C-axis nx360 Number of axes 5 Spindle speed (rpm) 14000 Spindle power (kW) 18.9 Tool interface SK40 Weight (kg) 10000 Machine hours (h) 15995 Year of manufacture 2011 Control system Siemens 840D SL Control type CNC Total power requirement (kW) 50 kVA Weight (kg) 10000 kg Location Baden-Württemberg Delivery September 2026 Equipment and accessories: -Internal cooling -Chip conveyor -Laser measuring -Measuring probe -3D-quickSET for checking and correcting the 4- and 5-axis kinematics -Band filter -Used tool holders Gbsdpfx Aszq Eghek Uot -Coolant gun

Condition: excellent (used), Year of construction: 2012, operating hours: 20,101 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, nominal power (apparent): 70 kVA, controller manufacturer: Siemens, controller model: 3D-Control Siemens 840D, workpiece height (max.): 525 mm, workpiece diameter (max.): 500 mm, workpiece weight (max.): 240 kg, total height: 2,800 mm, total length: 4,700 mm, total width: 6,000 mm, table load: 240 kg, rotary table diameter: 500 mm, overall weight: 12,000 kg, spindle speed (min.): 18,000 rpm, operating hours of spindle: 20,101 h, coolant supply: 40 bar, number of slots in tool magazine: 60, tool length: 300 mm, tool weight: 6,000 g, Equipment: chip conveyor, documentation/manual, CNC controller: 3D-Control Siemens 840D Axes X-axis travel mm: 600 Y-axis travel mm: 500 Z-axis travel mm: 500 C-axis degrees: 360º (0,001) B-axis degrees: -5 / +110º Distance spindle nose - table surface mm: 600 Feed rates m/min: 80 Rapid traverse m/min: 80 Acceleration in the axes m/s2: 10 Worktable Number of pallets: 2 Table dimensions mm: 500x500 Maximum workpiece size (D x H) mm: 500x525 Max. workpiece weight kg: 240 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 (40/100%ED Cooling Cooling through the Spindle Center bar: 40 Gbedpezd Agrjfx Ak Uot Tank capacity: 980 Tool system Tool holder: HSK-A 63 Tool magazine slots: 60 Tool changer: Double gripper With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Max tool weight kg: 6 Chip-to-chip time s: 4.5 Equipment Electronic Handwheel Chip conveyor Infrared probe Rinsing gun Mist collector Programmable coolant nozzles DXF import function Internal coolant supply Electrical cabinet active cooling unit Temperature compensation Paper band filter DMG AUTOshutdown DMG GREENmode DMG MACHINEcheck High-Speedd-Setting DMG Netservice-client DMG Service Agent Machine running times Under power: 35687 Spindle Working: 20101 Rated power kVA: 70 Basic machine dimensions / weight Length mm: 4700 Width mm: 6000 Height mm: 2800 Weight kg: 12000

Condition: used, Year of construction: 2013, x-travel 400 mm Gbedpsy Nd U Rsfx Ak Uot y-travel 400 mm z-travel 375 mm weight of the machine ca. 7150 kg

Condition: used, x-travel . mm y-travel . mm z-travel . mm Control . Gbodpfxeyqtdcs Ak Ujt type . spindle speed: . spindle taper . surface area . mm Rotary table . mm Table load . kg b-axis . ° c-axis . 0 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Year of construction: 2005, operating hours: 42,768 h, controller manufacturer: HEIDENHAIN, spindle speed (max.): 18,000 rpm, number of axes: 5, This 5-axis DMG DECKEL MAHO DMU 50 eVo linear was manufactured in 2005. It features a HEIDENHAIN control, a 40bar IKZ, a 60-tool magazine, and a spindle speed of 18k rpm. The machine includes automation capabilities fully adjustable for different product formats and positioning. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMU 50 eVo linear machine we have for sale. Contact us for more information. • Tool magazine: 60 tools • Through-spindle coolant (IKZ): 40 bar • Spindle overhauled in 2024 • B and C axes overhauled in 2024 Additional equipment • Automation (product handling), freely adjustable for product format and positioning • Paper belt filter • Blum laser tool break detection • Extraction system excluded Technical Specification Taper Size SK 40 Gsdpfx Akox Rd Hps Uebt

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 11045529844, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed length X-axis: 20,000 mm, feed length Y-axis: 20,000 mm, feed length Z-axis: 20,000 mm, nominal power (apparent): 50 kVA, controller manufacturer: HEIDENHAIN, controller model: TNC 426, total height: 2,700 mm, total length: 6,500 mm, total width: 3,000 mm, table width: 380 mm, table length: 500 mm, overall weight: 7,000 kg, number of slots in tool magazine: 60, mount diameter: 40 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 80 A, Equipment: chip conveyor, DECKEL MAHO DMU 50 EVOLUTION CNC Universal Machining Center - Tool holder: SK 40 Godpfozxyuiox Ak Uobt - Resolution of the linear measuring system X/Y/Z: 0.001 mm - Positional tolerance in X/Y/Z: 0.010 mm - Max. tool length from spindle nose: 280 mm - Max. tool weight with automatic tool change: 6 kg - NC rotary table with swivel axis, clamping area: 500 x 380 mm - Distance between T-slots: 63 mm 14 H 7 - Centering bore: 30 mm - Swivel speed: 26 rpm - Swivel range: 180° - Input and display resolution: 0.001° - Max. weight: 330 kg - Includes three-jaw chuck, diameter: 250 mm - Includes the tool holders located in the tool changer - Includes chip conveyor and coolant system Note: the machine can be transported on a standard truck! FCA D-63843 Niedernberg - loaded onto a truck

Condition: used, Year of construction: 2008, x-travel 500 mm y-travel 450 mm z-travel 400 mm Control HEIDENHAIN control MillPlus iT table surface area ø 500 x 380 mm B-axis 0 - 161,955 ° C-axis 360 ° spindle taper SK 40 spindle turning speed range 20 - 18.000 U/min spindle power max. 35 kW max. torque on the spindle max. 130 Nm feeds -stepless- bis 20.000 mm/min rapid traverse X/Y/Z axis 80 / 50 / 50 m/min rapid traverse B-axis 40 U/min C-axis rapid feed 50 U/min no. of tools in magazin 30 tool diameter if 2 vacant positions 130 mm Gedowlvi Ejpfx Ak Ujbt tool diametre at full load 80 mm tool length - max. 300 mm weight of tools max. 6 kg internal coolant system feed 40 bar total power requirement 52 kVA weight of the machine ca. 6 t dimensions of machine L x W x H 3,67 x 2,25 x 2,91 m = 5-axis machining center with 2-axis NC swivelling rotary table Accessories: electron. handwheel, chip conveyor, coolant, band filter device

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, controller manufacturer: SIEMENS, spindle speed (max.): 24,000 rpm, spindle motor power: 35,000 W, number of axes: 5, This 5-axis DMG DECKEL MAHO DMU 70 EVO Linear was manufactured in 2009. It features a working area with X-axis travel of 750 mm, Y-axis travel of 600 mm, and Z-axis travel of 520 mm. The machine is equipped with a high-speed spindle capable of reaching 24,000 rpm and a tool magazine with a capacity of 120 positions. It includes a DMG PH 150 L8 automation. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMU 70 EVO Linear machine we have for sale. Contact us for further details. • Feed rates: linear 20,000 mm/min; rapid traverse 50,000 mm/min • Table: clamping surface 700 × 500 mm • Tool magazine: 120 positions • Through-spindle coolant: high-pressure 40 bar • Documentation: instruction manuals and CE declaration Additional equipment • Coolant tank with paper filter, 600 L • Measuring probe Godpeymcvmofx Ak Uobt • Chip conveyor • Electronic handwheel (remote) • Pallet changer system DMG PH 150 L8, 8 stations (pallets not included) Technical Specification Taper Size HSK 63

Condition: ready for operation (used), Year of construction: 2013, operating hours: 23,831 h, functionality: fully functional, machine/vehicle number: 15465588584, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 375 mm, controller model: Heidenhain iTNC 530 HSCI, rotational speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 400 mm Travel range, Y-axis: 400 mm Travel range, Z-axis: 375 mm B-axis: -5 to +110 degrees C-axis: 360 degrees Table dimensions: 450 x 400 mm Maximum workpiece weight: 250 kg Spindle speed: 18,000 rpm Tool interface: HSK-A63 Number of tool positions: 60 Rapid traverse rate: 80 m/min MACHINE DETAILS Control system: Heidenhain iTNC 530 HSCI Gedpfezgt U Eox Ak Uobt Machine weight (approx.): 7,150 kg Operating hours Spindle hours: 23,831 h Power-on hours: 57,330 h EQUIPMENT Band filter system NC rotary table Handwheel FS Coolant gun Tool measurement system Chip conveyor Rotoclear viewing window Temperature monitoring

Condition: ready for operation (used), Year of construction: 2003, operating hours: 30,195 h, spindle speed (max.): 12,000 rpm, travel distance X-axis: 1,080 mm, travel distance Y-axis: 635 mm, travel distance Z-axis: 710 mm, controller manufacturer: HEIDENHAIN, controller model: Millplus IT, number of slots in tool magazine: 32, number of axes: 5, This 5-axis DMG DECKEL MAHO DMU 100T was manufactured in 2003. It features impressive travels of 1,080 mm in the X-axis, 635 mm in the Y-axis, and 710 mm in the Z-axis. The machine includes a fully refurbished Nikken CNC rotary tilting table and an Erowa Robot Easy automation system with 12 pallet stations. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMU 100T universal machining centre we have for sale. Contact us for further details. • Axes: 5-axis (X, Y, Z + A, B) • Condition note: Spindle collided with workpiece and is currently seized. Advised that it can be rebuilt/reinstalled by a specialized service company; estimated parts cost approx. €7,000. Gedpfozlgxuox Ak Uebt Additional equipment • Automation: Erowa Robot Easy system with 12 pallet stations • Workholding: Erowa zero-point clamping system (extensive set) • Rotary/tilting table: Nikken CNC rotary tilting table (fully refurbished in 2016) Technical Specification Taper Size SK 40

Condition: good (used), Year of construction: 2006, TECHNICAL DATA Main drive Speed: Infinitely programmable: 18`000 rpm In set-up mode: 20 - 800 rpm Work spindle: Gjdpfju Hkb Rsx Ak Ujbt Hollow shank taper: HSK-A63 Tool clamping: Hydraulic Feed drive Linear motor: X-axis AC servomotors: C, B, Y, Z Feed speed X, Y, Z: Up to 20`000 mm/min Rapid traverse Y, Z: 50 m/min X: 80 m/min B: 40 rpm C: 50 rpm Position measuring system Resolution: C, B, X, Y, Z: 0.001 mm Position tolerance: C, B, X, Y, Z: 0.010 mm Working range X-axis: 500 mm Y-axis: 450 mm Z-axis: 400 mm B-axis: 0° to 161.955 ° C-axis: n x 360 ° Tool changer with double gripper Magazine slots: 120 Max. Tool diameter without free spaces: 80 Max. Tool diameter with free spaces: 130 Max. Tool length from spindle nose: 300 mm Max. Tool weight: 6 kg NC rotary table with swivel axis C-axis: Clamping surface rotary axis (mm): 500 x 380 mm Distance of T-slots / size: 63 / 14 H7 Centering bore: 30 H6 Max. Torque: 1491 Nm Max. Rotation of the table top: 50 rpm B-axis: Max. Swivel torque: 1864 Nm Swivel speed: 40 rpm Swivel range: 0° - 161.955 ° Input and display precision: 0.001 ° Weight: 420 kg Max. load: 200 kg Weight: Approx. 6800 kg Installation weight: Approx. 7500 kg Dimensions: 4170 x 3133 x 2560 mm SCOPE OF OFFER U.A: (list not exhaustive): Deckel Maho DMU 50 Evo CNC machining center Heidenhain iTNC 530 Tool breakage control Blum measuring probe Oil mist separator Fire extinguishing system High-pressure pump and belt filter system Chip conveyor Exact scope of supply according to photo gallery We assume no liability for the accuracy, completeness and up-to-dateness of the information provided

Condition: repair required (used), Year of construction: 2003, operating hours: 24,700 h, functionality: limited functionality, Year of manufacture: 2003 NC rotary table: C-axis, Ø800x620 Swiveling milling head: B-axis, 0-90° Travel: X 1080 Y 710 Z 710 Control system: iTNC530 Internal cooling pressure: 40 bar Internal air blow External cooling Gjdpfx Asy Tadvjk Ujbt Spindle speed: max. 12000 rpm Tool holder: SK40 Tool magazine: 32 positions Measuring probe: Infrared, Heidenhain Electric handwheel: Heidenhain Rotating viewing window: Rotoclear Chip conveyor Oil mist extraction Coolant system with paper band filter Chip flushing gun Work area light Clamping fixture (next to the rotary table) for longer workpieces The clamping mechanism of the milling head is leaking/defective on this machine.

Condition: defective spare-parts repository (used), Year of construction: 2003, operating hours: 30,434 h, functionality: not functional, machine/vehicle number: 1114 000402 3, travel distance X-axis: 1,060 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller model: Heidenhain iTNC530, rotational speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 1,060 mm Y-axis travel: 710 mm Z-axis travel: 710 mm Working area: Ø800 NC rotary table Spindle speed: 10,000 rpm Number of axes: 5 Tool changer: 30 stations Tool holder: HSK63 MACHINE DETAILS Gsdpey Ib A Njfx Ak Usbt Control: iTNC530 Dimensions & Weight Machine dimensions (L x W x H): 4,080 x 4,490 x 3,117.5 mm Transport dimensions (L x W x H): 3,500 x 2,500 x 2,410 mm Weight: 9.7 t Operating hours Spindle hours: 30,434 h Operating hours: 66,001 h Note: The machine temperature rises immediately, and in the past there has even been smoke. The machine has spindle damage. Various cable insulations are worn.

Condition: good (used), Year of construction: 2004, functionality: fully functional, operating hours: 39,000 h, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, total height: 5,600 mm, total length: 9,000 mm, overall weight: 6,000 kg, controller model: Heidenhain Mill Plus IT, For sale is a 5 axis machining center of the Makre DMU and type 50 eVolution Please note the GMN high frequency spindle spindle HCS 30.000 /15 and the 92-fold tool changer The machine is in good condition and fully functional Technical data Year of construction: 2004 Operating hours: approx. 39,000 h Control system: Heidenhain MillPlus IT Table size: approx 500 mm ⌀ Traverse paths: X-axis: 500 mm Y-axis: 420 mm Z-axis: 380 mm A-axis: 0-180° C-axis: 360 ° Tool holder: HSK 50 Spindle speeds: max: 30,000 1/min Frequency: 500 Hz Power: 15 kW Tool places: 92 NO chip conveyor Space requirement according to drawing: 9,000*5,600 mm Transport dimensions: 2,800*3,700*2,800 mm Weight: 6,000 kg On request, transport and loading can be organized throughout Europe for an additional charge. Gbodpfx Akstyit Eo Uet Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Fzho0bc Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website

Condition: ready for operation (used), Year of construction: 2001, operating hours: 29,173 h, functionality: fully functional, machine/vehicle number: 11045522744, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, controller model: HEIDENHAIN MILLPLUS, spindle speed (max.): 18,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid commits you to collecting the item promptly between October 7, 2026, and October 14, 2026! TECHNICAL DETAILS Travel range X-axis: 500 mm Travel range Y-axis: 420 mm Travel range Z-axis: 380 mm Rapid traverse rate X-axis: 50 m/min Rapid traverse rate Y-axis: 50 m/min Rapid traverse rate Z-axis: 50 m/min Feed rate X-axis: 20 m/min Feed rate Y-axis: 20 m/min Feed rate Z-axis: 20 m/min Spindle speed: 18,000 rpm Torque: 1,100 Nm Tool holder: SK 40 Holder diameter: 40 mm Number of tool positions: 32 Max. tool length from spindle nose: 280 mm Max. tool weight with automatic tool changer: 6 kg Max. total weight of tools in magazine: 90 kg Table length: 500 mm Table width: 380 mm Max. workpiece weight: 330 kg Clamping area: 500 × 380 mm Distance between T-slots: 63 mm T-slot width: 4 H7 Centering bore diameter: 30 H6 Max. table rotation speed: 33 rpm Max. swivel torque: 1,400 Nm Swivel speed: 26 rpm Linear scale resolution X/Y/Z: 0.001 mm Positioning tolerance: 0.010 mm MACHINE DETAILS Control system: HEIDENHAIN MILLPLUS Rated apparent power: 40 kVA Gedpfx Aszu Ixnsk Ujbt Input voltage: 400 V Input frequency: 50 Hz Input current: 80 A Dimensions and weight Dimensions (L x W x H): 3,500 x 2,400 x 2,500 mm Total weight: 7,000 kg Operating hours Counter 1: 80,842 h Counter 2: 29,173 h EQUIPMENT NC rotary table with swivel axis

Condition: good (used), Year of construction: 2000, operating hours: 53,776 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 380 mm, rotary table diameter: 500 mm, rotational speed (max.): 18,000 rpm, For sale is a 5-axis simultaneous milling machine from Deckel Maho, model DMU 50 eVolution. The machine is in good condition and ready for immediate use. Technical Data: Year of manufacture: 2000 Control: MillPlus Gjdpfx Ajwxd Agsk Uobt Power-on hours: 53,776 h Spindle hours: 18,512 h X-axis: 500 mm Y-axis: 400 mm Z-axis: 380 mm B-axis: 0-180° C-axis: 360° Clamping surface: Ø 500 mm Max. table load: 200 kg Spindle taper: SK40 Max. speed: 18,000 rpm Spindle power: approx. 15 kW Tool magazine: 60 slots Dimensions: approx. 3,400 x 2,400 x 2,500 mm Weight: 5,500 kg Transport and loading can be arranged Europe-wide at an additional cost upon request. Prices are subject to VAT. Viewing possible by appointment. Please contact us—our team is happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell your equipment? For further information or contact options, please visit our website.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller model: MILLPLUS iT HEIDENHAIN, table load: 800 kg, 5-axis simultaneous machining center! TECHNICAL DETAILS X travel: 1,250 mm Y travel: 710 mm Z travel: 710 mm Gedsxwlgzspfx Ak Uebt Table size: 1,500 x 800 mm Table load capacity: 800 kg Spindle speed: 12,000 rpm Spindle motor: 15 / 10 kW Spindle taper: SK 40 Tool changer: 60 positions MACHINE DETAILS CNC control: MILLPLUS iT HEIDENHAIN Total power consumption: 44 kVA Dimensions & Weight Footprint: approx. 3.5 x 2.65 x 2.65 m Machine weight: approx. 10.5 t EQUIPMENT B-axis (-120 / +30) NC rotary table integrated into fixed table Direct measuring system 3D probe infrared HEIDENHAIN TS 640 Coolant system 40 bar, 600 l Rinsing gun Chip conveyor 3D Quickset software Note: The machine is fully functional. The rotary table and X-axis produce noise.

Condition: excellent (used), Year of construction: 2007, operating hours: 13,500 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, overall weight: 15,800 kg, operating hours of spindle: 13,500 h, coolant supply: 40 bar, We offer in good condition Deckel Maho DMU100P Duoblock from 2007 with only 13.500 spindle hours. Heidenhain iTNC530 control X-Axis travel: 1000 mm Y-Axis travel: 1000 mm Z-Axis travel: 1000 mm Internal coolant 40 bar SK40 12.000 RPM Spindle Table Ø1100 x 900 Gsdpfxjzlyd De Ak Uobt Machine will be in stock in the next 2 weeks.

Condition: used, Year of construction: 1999, functionality: fully functional, DECKEL MAHO - DMU 125 T Offer Details Stock Number: 1039-8230 Machine Type: Machining Center - Vertical Manufacturer: DECKEL MAHO Gjdpfx Aozfzgtok Usbt Type: DMU 125 T Year of Construction: 1999 Control: TNC 430 Heidenhain Location: D-59302 Oelde Country of Origin: Germany Delivery Time: Upon agreement Incoterms: EXW (Ex Works) Additional Information: CNC - Vertical Machining Center DECKEL MAHO - DMU 125 T Technical Details X-axis travel: 1,250 mm Y-axis travel: 880 mm Z-axis travel: 800 mm Control: TNC 430 Heidenhain Main Spindle: Spindle Speed Range: max. 12,000 min/-1 Drive Power - Main Spindle: 15 / 10 kW Max. Torque: 500 Nm Tool Holder: SK 40 Work Table: Table Clamping Surface: 1,500 x 1,050 mm Max. Table Load: 2,500 kg Number of T-slots: 10 T-slots - Width: 18 H7 mm T-slots - Pitch: 100 mm Tool Changer: Number of Tool Positions: 60 Max. Tool Diameter: 80 mm Max. Tool Diameter with free adjacent position: 160 mm Max. Tool Length: 315 mm Max. Tool Weight: 8 kg Max. Total Weight: 100 kg Feeds: Rapid Traverse (X / Y / Z): 15 m/min Feed Rate: 10,000 mm/min Total Power Consumption: 29 kW Machine Weight (approx.): 16.0 t Space Requirement (approx.): 7.0 x 5.0 x 3.3 m Accessories Documentation Chip Conveyor Coolant System Tool Changer