Used Centering Microscope for sale (14,398)

Condition: used, TAMAR Type: FEMET_WI_ID071_TAMAR Optical Microscope PLMIS Optical microscope The TAMAR optical microscope ID071 is used for the optical inspection of samples with a maximum size of approximately 780x650mm2 (substrate size) in the PLG cleanroom. Substrate size: complete substrate size (780x650mm2) Objective: The objective lens focuses the light emanating from the object being observed to create a real image for the viewer. Brightfield mode (BF): The light from the microscope is directed through the objective lens onto the sample. High resolution, low contrast Darkfield mode (DF): Illumination mode for increasing contrast, high contrast for edges and particles. Principle: The center of the incident light beam is blocked; only peripheral light is directed through the objective lens and strikes the sample from the side. Edges and particles appear bright, while the smooth background appears dark. TAMAR optical microscope ID071 X-Y stage Software revision 1.0 Condition: used Scope of delivery: (Autosampler as shown in the picture) Lodpfxozd Sqme Albsah (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Shimadzu Type: Prestige-21 / with AIM-8800 infrared microscope Shimadzu IR Prestige-21 infrared spectrophotometer The IRPrestige-21 is designed for both highly sensitive and broad applications in the fields of research and development. It thus provides an excellent addition to the existing FTIR series, which covers, among other things, the standard laboratory area. AIM-8800 specifications Optics: 15x Cassegrain objective 15x Cassegrain condenser mirror with inlet for purging MCT detector: with liquid nitrogen monitoring system Wavelength range: Type 1 - 5000 - 720 cm-1 Type 2 - 5000 - 650 cm-1 Electrically activated aperture XYΘ directional drive. The adjustment of the XY directional increments is 1 µm above the sample surface and 1° steps in the Θ direction (numerical input possible). Minimum adjustment value: 3 µm Motor-driven XY sample stage Positioning range: X-axis: 70 mm; Y-axis: 30 mm Resolution: 1 µm distance Sample thickness: Reflection mode - ≤ 40 mm Transmission mode - ≤ 10 mm Operation via the keyboard of the main unit Selection of the measurement mode / XY stage operation (speed control in 4 steps) / manual focusing / illumination control (Optional) Control via PC Selection of the measurement mode / XY stage operation / automatic centering / manual focusing / automatic focusing / illumination control / Aperture adjustment / aperture preview / measurement position and recording of the aperture setting (10 sample positions, 2 background positions) Lodszdyyiopfx Albeah Environmental conditions: Ambient temperature: 15°C ~ 30°C Humidity: 70% or less External dimensions, weight: W410mm x D540 mm x H520 mm x 36kg Condition: used Scope of supply: (See picture) (Changes and errors in technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: good (used), Zeiss Primovert Inverted Microscope (Serial Number: 3841010097) WF 10x/20 eyepieces Zeiss Primo Plan-Achromat 4x/0.10 objective Zeiss Primo Plan-Achromat 10x/0.25 Ph1 objective Zeiss Primo Plan-Achromat 20x/0.30 Ph1 objective Zeiss Primo Plan-Achromat 40x/0.50 Ph1 objective Ljdpfx Alezhidrebsah Ph1 / 0.3 phase slider Dust cover

Condition: ready for operation (used), Year of construction: 2012, operating hours: 9,020 h, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 36 m/min, feed rate Y-axis: 36 m/min, feed rate Z-axis: 24 m/min, controller manufacturer: FANUC, controller model: MXP-200FB, workpiece weight (max.): 800 kg, total height: 2,765 mm, total length: 3,650 mm, total width: 2,950 mm, table width: 600 mm, table length: 1,120 mm, table load: 800 kg, overall weight: 6,500 kg, spindle speed (max.): 8,000 rpm, operating hours of spindle: 9,020 h, spindle motor power: 11,000 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, We acquired this machine in working condition from a production environment, and it has always been well-maintained. The machine is in excellent mechanical and visual condition and is currently set up and operational in our showroom! Additional options & accessories: - Chip conveyor - Internal cooling system (ICS) - 30-position tool changer (standard 20 positions) Lodpfx As Abkdwolbjah - Electronic handwheel - Air and coolant gun - All original documentation - Oil skimmer

Condition: used, Year of construction: 2007, functionality: fully functional, power: 20 kW (27.19 HP), input voltage: 415 V, input current: 50 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 2,500 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 80 mm, Equipment: documentation/manual, We offer this used WEEKE OPTIMAT BHX 500 throughfeed machining center, year of construction 2007. The Homag Weeke Optimat BHX 500 is a compact CNC Horizontal drilling centre designed for high-precision processing of furniture panels, cabinet parts, and joinery components. Its horizontal machining design allows efficient processing with minimal floor space while maintaining high production speed and accuracy. _____ Key Features • Horizontal CNC drilling centre for efficient panel processing • Large processing capability • High-speed axis movement for fast production cycles • Integrated clamping system for precise panel positioning • Designed for drilling, routing, and grooving operations • Built by HOMAG / Weeke, a leading manufacturer of CNC woodworking machinery _____ Axis Speeds • X axis speed: up to 138 m/min • Y axis speed: up to 80 m/min • Z axis speed: up to 50 m/min • Pressure plate axis: 27 m/min _____ Workpiece Dimensions • Length: Min 300 max 2500mm • Width: Min 100 max 1000mm • Thickness: Min 4 max 80mm _____ Laedpfx Alsyr Utnsbjh Machine Dimensions • Length: approx. 6500 mm • Width: approx. 2300 mm • Height: approx. 2700 mm _____ Electrical Requirements • Operating voltage: 3 × 415 V ±5% • Frequency: 50 Hz • Total connected load: approx. 19.5 kW • Recommended fuse protection: 50 A _____ Pneumatic Requirements • Compressed air pressure: minimum 7 bar • Air consumption: approx. 2500 NL/min _____ Dust Extraction • Dust extraction connection: 2 × 280 mm ports • Airflow requirement: minimum 4450 m³/h • Vacuum pressure: approx. 3000 Pa _____ If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2019, TECHNICAL DETAILS General Information Manufacturer: XYZ Machine Tools Model: SL 1100 / 1500 mm Machine Type: Heavy-duty CNC turning machine Year of manufacture: 2019 Condition: well-maintained Control System Control system: Siemens ShopTurn / Siemens CNC 840D Working Area Distance between centers: 1,500 mm Swinging diameter over bed: 1,100 mm Spindle bore: 165 mm Spindle and Drive Main drive: 70 kW Speed range: max. 660 rpm Machine Construction Bed width: 558 mm Machine bed: heavy cast iron construction Tailstock: included, electric Operating Condition Inspection: possible by appointment Functional test: possible via video before shipping or collection EQUIPMENT Siemens ShopTurn Ledpfx Alo Aayk Rjboah Siemens CNC 840D Electric tailstock Automatic central lubrication Coolant system Full enclosure Large chuck Safety guard Work area lighting

Condition: good (used), Year of construction: 1987, functionality: fully functional, overall weight: 1,650 kg, spindle mount: MK 6, L&Z Lathe Weiler Commodor B The machine has been cleaned and inspected by us. It runs smoothly; measured runout is < 0.01 mm. Upon request, a coolant system and tool guard with a microswitch can be retrofitted. For sale only to businesses as defined in § 14 BGB. Laodpfx Aljz A Ah Robsh Technical data: Year of manufacture: 1987 Turning length: 1000 mm Turning diameter over bed: 380 mm Turning diameter over cross slide: 190 mm Spindle speed: 25 - 2000 rpm Spindle bore: Ø 56.0 mm / MK6 Tailstock quill: MK 4 Quill stroke: 150 mm Bed width: 310 mm Spindle mounting: DIN 55027 Size 6 Feeds - longitudinal: 0.022 - 0.8 mm/rev Feeds - transverse: 0.011 - 0.4 mm/rev Threads: M 0.3 - 10.0 mm Operating voltage: 380 V Total power consumption: 4 kW Weight approx. 1650 kg Accessories: • 3-axis digital display • Multifix quick-change tool holder B • 3-jaw chuck Forkardt 200 • 4-jaw chuck Röhm • Operating manual • Chip tray with integrated coolant pump for connecting a coolant system • Various accessories (set of soft jaws, turning tools, etc.)

Condition: not inspected (used), Year of construction: 1999, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, overall weight: 2,700 kg, Fanuc 21IM 4th axis Lasdpfs Abl Rlsx Albjh travel distances 600 x 400 x 400 mm tool changer BT40 spindle weight 2700 kg

Condition: used, Year of construction: 1987, Parallel lathe PBR, type TM-30 Distance between centers: 3000 mm Max. diameter over bed: 620 mm Max. diameter over cross slide: 400 mm Max. diameter in bed gap: 860 mm Spindle diameter: Ø 105 mm Spindle speed: 15 – 1500 rpm 3-jaw chuck, Ø 315 mm Year of manufacture: 1987 Laodpfo Acd N Nex Albeh Motor: 15 hp Threading: Metric + Whitworth Tailstock: MK5 Equipment: 1 x 3-point fixed steady rest Rapid traverse Voltage: 380 V Dimensions (L x W x H): 4900 x 1500 x 1700 mm Weight: 4.5 t

Condition: used, Year of construction: 1973, functionality: fully functional, turning diameter over bed 630-640 mm turning diameter over slide rest ca 380 mm turning length ca 2000-4000 mm total power requirement 15 kW Ljdpeztfwrefx Albjah weight of the machine ca. 7-8 t

Condition: used, Year of construction: 1999, x-travel 600 mm y-travel 450 mm z-travel 300 mm Laodj Adu Tzjpfx Alboh CNC-control Roeders RMS6 table-size 700 x 550 mm max. table load 800 kg spindle turning speed range 42.000 U/min feed stepless 0 - 30.000 mm/min rapid traverse 30 m/min drive capacity - spindle motor 14 kW tool change unit Pick-up 18 Pos. voltage 400 V total power requirement 20 kVA weight of the machine ca. 5,2 t dimensions of the machine ca. 3,00 x 2,30 x 2,70 m - Serial No.: 88231-83 - HSC spindle Fischer MFW1230/42 - Dust extraction system

Condition: used, Year of construction: 2000, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel distances X-axis travel: 1,200 mm Y-axis travel: 620 mm Z-axis travel: 520 mm Control system CNC control: Heidenhain TNC 410 Work table Table size: 1,550 × 600 mm Design: continuous table for longer workpieces Tandem operation: possible with a dividing screen Feed rate and rapid traverse Feed rate range: 1–30,000 mm/min Rapid traverse: 45 m/min Laodez S Nizopfx Albsh Spindle and tool holder Spindle speed: 40–8,000 rpm Tool holder: ISO 40 Tool changer Tool changer: 30 positions Performance data Total power consumption: 20 kVA Machine weight: approx. 9 tons Dimensions Space requirement: approx. 4.2 × 2.3 × 2.7 m EQUIPMENT Continuous work table Dividing screen for tandem operation 3 additional clamping tables Tool changer with 30 positions Heidenhain TNC 410 CNC control

Year of construction: 2000, operating hours: 10,000 h, condition: ready for operation (used), functionality: fully functional, Machine is in full functional state last time worked 25 days ago and its in your warehouse machine can be inspected and have video of machine working Laodpfx Als Adlxzjboh

Condition: good (used), Year of construction: 2008, functionality: fully functional, Quaser MV 154 PL, Lasdpo Aawnyofx Albeh Year of manufacture: 2008, Control system: Heidenhain iTNC 530, Travel range X/Y/Z: 1000/530/560 mm, Tool changer: 30-position, SK 40, Air blow-through spindle, Internal cooling system (IKZ): 20 bar, Chip conveyor, 3D measuring probe, Thermal compensation, Temperature-controlled oil cooling system, Spindle replaced in 2021.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, table width: 510 mm, table height: 610 mm, table length: 760 mm, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, The machine underwent a complete overhaul and modernization in the mid-2000s. The machine is in excellent condition and offers very high precision. It features a 10,000 rpm spindle and a high-pressure coolant system. It has been continuously maintained and serviced. A new Yaskawa servo card was replaced two years ago at a cost of EUR 3,000. The machine has a new touchscreen, plus one additional spare touchscreen, and the keyboard has also been replaced. The spindle motor was completely refurbished two years ago. Lasdpfxe Ab Eu Dj Albeh

Condition: ready for operation (used), Year of construction: 2003, Available immediately ex-works: Reckermann 3-axis machining center Type VMC 105 E Lasdpfx Alj Aa Ircjbeh Year of manufacture 2003 Heidenhain TNC 410 M 20-tool changer SK 40 tool holder Spindle speeds up to 8,000 rpm Drive power 7.5 / 11 kW Table size 1520 x 515 mm Travel distances X/Y/Z 1050/560/520 mm Feed rate 1 – 5000 mm/min Rapid traverse rates up to 15,000 mm/min Weight 4 tons Accessories: vices, tool holders Electronic handwheel Price: Euro 8,500.00 plus VAT ex-works.

Condition: used, Year of construction: 2019, functionality: fully functional, operating hours: 7,996 h, power: 10.3 kW (14.00 HP), controller manufacturer: HOLZ-HER, actuation type: electric, Equipment: documentation/manual, For sale, directly from our kitchen and interior production facility. Compact vertical CNC woodworking center for drilling, milling, and grooving sheet material. The machine is offered including the tools, manuals, and electrical diagrams listed below. MACHINE DETAILS • Brand: HOLZ-HER Maschinenbau GmbH, Austria • Model: Evolution 7405 4mat - BAZ19V5 • Year of construction: 2019, invoice and commissioning in 2020 • Control/software: CAMPUS 7.5.3.10 • Vacuum pump: Becker VT 4.8 • First owner • Automatic central lubrication • 2D barcode scanner USAGE DETAILS Meter readings as of October 1, 2026: • Machine operating hours: 7,996 hours • Active feed ("Vorschub aktiv"): 598 hours • Workpiece counter: 22,887 • Tool changes: 21,584 • Last maintenance on July 2026, complete history available INCLUDED TOOLS • 1 left-hand cutting milling cutter Ø20 mm, length 28 mm • 1 right-hand cutting milling cutter Ø20 mm, length 28 mm • 1 right-hand cutting milling cutter Ø8 mm, length 22 mm • 1 right-hand cutting milling cutter Ø10 mm, length 22 mm • 1 drill Ø35 mm, length 15 mm • 5 drills Ø5 mm, length 25 mm • 1 drill Ø8 mm, length 35 mm • 1 drill Ø10 mm, length 35 mm • 1 drill Ø10 mm, length 90 mm • 5 drills Ø8 mm, length 15 mm • 1 saw blade Ø120 mm, thickness 4.5 mm DOCUMENTATION • Manuals available • Electrical diagrams available • Machine software installed on the CNC SALE AND PICK-UP The machine is still operational (located in the Anzegem area) and can be demonstrated by appointment. Availability and pick-up by arrangement. Dismantling, loading, and transport are not included. Demo video available upon request. Interested? Contact us for additional information or to schedule a viewing. Laodpj Ab Uzaefx Alboh

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 1054447, controller manufacturer: Haas, spindle speed (max.): 12,000 rpm, number of spindles: 1, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, HAAS VF2-SS CNC milling machine with a rotary-tilting table (5-axis) in excellent condition (only minor paint defects in the interior). Chip conveyor, up to 25 tools can be used simultaneously in the machine (24 in the tool changer + 1 in the spindle), spindle SK40. Renishaw probing system with wireless communication. Includes a wide range of accessories (chuck, mandrels, hydraulic collet chuck on the dividing head, center clamp, collets, etc.). Complete documentation. Lodpfx Ae Ab Altolbjah This machine has been operating flawlessly and reliably until its last use and is only being sold due to the closure of our business!

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 1,800 kg, table width: 800 mm, table length: 920 mm, overall weight: 14,500 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 33, Control system: HEIDENHAIN iTNC 530 with smarT.NC Tool interface: HSK-A63 Lsdpfxe Aba Thj Albsah Machining: 3-axis simultaneous Special equipment: - 3D touch probe system - Tool measurement - Electronic handwheel - Roller-type roof guard FREE DELIVERY!

Condition: ready for operation (used), Year of construction: 2004, operating hours: 17,500 h, functionality: fully functional, travel distance X-axis: 830 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller model: Heidenhain 530 (MC422), rotational speed (max.): 12,000 rpm, The machine is in very good condition, runs quietly, and operates with precision. TECHNICAL DETAILS Travel X-axis: 830 mm Travel Y-axis: 630 mm Travel Z-axis: 630 mm Feed rates: 15,000 mm/min Rapid traverse: 30,000 m/min Motor spindle: 12,000 rpm Number of tool stations: 32 MACHINE DETAILS Control: Heidenhain 530 (MC422) Tool holder: SK 40 Weight: approx. 9,000 kg Spindle hours: approx. 17,500 EQUIPMENT Internal coolant supply (IKZ) Chip conveyor Electronic handwheel Blum laser Flushing unit Filtration system Note: The probing system is not included in the scope of delivery. Laedpfx Aljz N Adgsbeh

Condition: used, Year of construction: 2023, operating hours: 1,621 h, machine/vehicle number: 6000030, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 575 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D SL, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,800 mm, workpiece height (max.): 875 mm, total height: 6,600 mm, total length: 8,200 mm, total width: 4,800 mm, overall weight: 32,000 kg, spindle speed (min.): 17,500 rpm, spindle speed (max.): 1 rpm, distance table to spindle center: 1,300 mm, distance table center to spindle nose: 425 mm, number of spindles: 1, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, Technical Data Operating time: 1,621 hours Technical Data Supply voltage: 3 × 400 V / 50 Hz (earthed) Supply system: TN-S or TN-C system Total connected load: 105 kVA Nominal load factor RDF: 0.6 Circuit breaker: 160 A gG (5 s) Dimensions Footprint including coolant cleaning system (W × H × D): 8.20 × 4.80 × 6.60 m Weight Operating weight of the machine: 32,000 kg Transport weight: 27,000 kg Control System CNC control: SIEMENS SINUMERIK 840D SL Main Spindle Spindle arrangement: horizontal Design: liquid-cooled motor spindle, AC synchronous technology Spindle lubrication: oil lubrication with minimum quantity lubrication Tool holder: HSK-A63 Tool Clamping System Mechanical clamping force: > 18 kN Setting dimension: 10.5 ± 0.1 mm Performance Data Speed range: 1–17,500 min⁻¹ Acceleration time: 0.7 s Power: 35 kW Nominal power: 26 kW Torque: 80 Nm (40% duty cycle) Nominal torque: 60 Nm Tool Magazine Tool change system: pick-up Tool management: permanently coded Capacity: 40 (1 × 40) tools Maximum total tool load: 200 kg Working Area X-axis: 3000 mm Y-axis: 1800 mm Z-axis: 875 mm Distance between spindle and center of swivel table: 425–1300 mm Tool change position X/Y/Z: 0/0/-310 mm Drive System General Design: Three-phase linear motors Position measuring system X-/Y-/Z-axis: direct, absolute X-axis Rapid traverse speed: 120 m/min Maximum acceleration: 10 m/s² Relative acceleration increase (G0): 200 m/s³ Relative acceleration increase (G1): 50 m/s³ Peak force: 10,000 N Nominal force: 5,000 N Y-axis Rapid traverse speed: 120 m/min Maximum acceleration: 16 m/s² Relative acceleration increase (G0): 600 m/s³ Relative acceleration increase (G1): 300 m/s³ Peak force: 10,000 N Nominal force: 5,000 N Z-axis Rapid traverse speed: 120 m/min Maximum acceleration: 20 m/s² Relative acceleration increase (G0): 1000 m/s³ Relative acceleration increase (G1): 500 m/s³ Peak force: 7,000 N Nominal force: 3,500 N Accuracy Positioning accuracy A: ≤ 0.010 mm Repeat accuracy R: ≤ 0.006 mm Tool Change Average chip-to-chip time at n < 17,500 min⁻¹: 4.00 s Workpiece Handling Design: Swivel table driven by an AC servomotor with two opposing clamping surfaces Swivel table: bilateral locking via gear coupling, hydraulically actuated Swivel time 0/180 degrees: 4.0 s Maximum asymmetrical load: 3000 Nm Repeat accuracy at a diameter of 1200 mm: ≤ 0.010 mm Maximum dimensions of clamping device and workpiece: Ø 2200 mm × 3480 mm Maximum weight of clamping device and workpiece per side: 1000 kg Swivel range: 358° Swivel range with parallel loading: -16°–0° and 164°–180° Worm gear division: 2° Maximum speed: 16 min⁻¹ Interface for Control Programs Rotary Distributor Rotary distributor pair for NC rotary table (A/U-axis): unregulated, leak-proof sealed Distribution channels: 16 Maximum hydraulic operating pressure: 250 bar Maximum operating pressure: 8 bar Nominal diameter: 6 Maximum permissible speed at p = 200 bar: 20 min⁻¹ Hydraulic System Operating pressure: 250 bar Flow rate: 9 dm³/min Ledps Aax U Iefx Albeah Capacity of the hydraulic tank: 120 dm³ Hysteresis when charging the accumulator: 230–260 bar

Condition: used, Year of construction: 1952, Technical details: turning diameter over bed: 1000 mm turning diameter over support: 520 mm turning length: 2500 mm support travel z-axis: plan: ca. 500 mm support travel z-axis: Obersupport: ca. 300 mm centre height: 300 mm Lasdpfx Alju Tq U Isbjh spindle passage: 90 mm range of revolution per miute: 3,2 - 382 / 22 step U/min range of feed in x - axis: längs: 0,213 - 2,67 / 36 step m/min range of feed in y - axis: quer: 0,070 - 1,11 / 36 step m/min tailstock quill taper MT: 6 total power requirement: 22 weight of the machine ca.: 8,2 t dimension machine approx.LxWxH: 5,3 x 1.,6 x 1,6 m transport measurements machine: ca. 5,5 x 1,7 x 1,6 m Equipment: Faceplate Ø 1000mm 4-fold turning tool holder Lynette Ø 250 closed Accesorios four-jaw chuck Ø 630 i.D. *

Condition: good (used), Year of construction: 2007, X 1,200 Y 800 Z 510mm, table 500mm diam. HSK 63, 20.000Rpm, cooling through spindle 20 bar, ATC 40 pos, Heidenhain TNC 530, weight 16.100kg Laodpfx Alj Abw Snsbeh

Condition: good (used), Year of construction: 2015, operating hours: 2,727 h, functionality: fully functional, YEAR 2015 Production hours 2727 h MANUFACTURER HAAS AUTOMATION INC MODEL VF 5/40 CNC HAAS Technical features : X-axis 1270 mm Y-axis 660 mm Z-axis 635 mm X-axis rapid traverse 18.0 m/min Y-axis rapid traverse 18.0 m/min Z-axis rapid traverse 18.0 m/min Spindle tip-to-table travel (~max.) 742 mm Spindle tip-to-table travel (~min.) 107 mm 24-position tool changer Spindle speed 10.000 rpm Maximum spindle power 22.4 kW Maximum spindle torque 122.0 Nm 2000 rpm Spindle taper CT40 | BT40 | HSK-A63 Table width 584 mm Table length 1321 mm Maximum table load 1815 kg Table T-slot width 14 mm Table center distance 80 mm Laodpfx As Adql Tolbjh Machine supplied with manuals and CE declaration of conformity

Condition: used, Year of construction: 1960, Technical details: turning diameter over bed: 630 mm turning diameter over support: 320 mm turning length: 2800 mm centre distance: 2800 mm turning dia. in gap: 700 mm length of gap: 450 mm spindle bore of work spindle: 70 mm weight of the machine ca.: 4,4 t dimension machine approx.LxWxH: 4,7 x 1,5 x 1,5 m Thread cutting possible Accessories: 4-jaw chuck various tips Gear wheels Jaws and small parts Lsdsu Ix A Ejpfx Alboah *