Lead/traction spindle lathe

Optimum OPTIturn TH 4620D

Condition: used, machine/vehicle number: 007984, Max. machining width: 1300 mm Min. machining thickness: 4 mm Working Table: Fixed pass height Vacuum feed belt: yes No. Operating units: 4 Nr Nedpfx Agjwqdbme Iewn

Condition: used, Wig welding machine L-TEC, Inverter TIG 200 DC type WIG welding machine for direct current DC Serial no. 184548, year of manufacture approx. 1994 Power: 200 Amps = 60% duty cycle 155 Amps = 100% duty cycle Adjustment range: stepless Current type: DC (direct current) Mains connection: 400 Volts, 50 Hz, 32 Amps plug - 4 meter hose set with central connection and hand torch - with remote potentiometer (foot switch) - gas pressure regulator - DC only - HF ignition Space requirement L x W x H: 850 x 480 x 740 mm Weight: approx. 150 kg Nwodpfsdzqb Eex Ag Isn The welding test yields very good results when welding stainless steel with direct current. Otherwise in good condition.

Condition: used, Year of construction: 1985, turning diameter over bed 340 mm turning diameter over slide rest 260 mm turning length 700 mm spindle bore 48 mm spindle turning speed range 25 - 2000 U/min spindle nose DIN 55027 KK 5 voltage 380 Volt total power requirement 2,2 / 4,4 kW weight of the machine ca. 1000 kg dimensions of the machine ca. 1.800 x 700 x 1.500 mm Nedpfx Agezlkwbs Ijwn NARDINI MS 175E â?? Robust Lead and Feed Spindle Lathe A solid and proven conventional lathe for workshops, maintenance, mechanical engineering, and demanding machining tasks. The machine impresses with its robust construction, intuitive operation, and versatile applications. It is ideal for turning, thread cutting, face and longitudinal turning, as well as for machining a wide variety of workpieces. Advantages of the NARDINI MS 175E: â? Robust, durable machine construction â? Proven conventional technologyâ??ideal for workshops and training â? Lead and feed spindles for versatile machining capabilities â? Wide speed range â? Feed and thread tables for quick and convenient setup â? Extensive options for metric and other thread types â? Well-organized control panel with clearly arranged switches and adjustment controls â? Powerful and precise machining thanks to the machineâ??s sturdy construction â? Solid machine bed for excellent stability and low-vibration operation â? Protective cover over the spindle area for additional operator safety â? Ideal for one-off production, repairs, maintenance, and small-batch production â? A machine for users who value mechanical, reliable technology over unnecessary complexity Equipment: - 3-jaw lathe chuck - Various jaws - Lathe chuck guard - Collet chuck adapter - Various collets - Multifix tool holders - Multifix adapters - Vibration-damping feet

Condition: new, Year of construction: 2026, CORMAK 330 × 915 Universal Lathe is a professional conventional lathe designed for precision machining of a wide range of materials, including carbon steel, stainless steel, and non-ferrous metals. With its rigid construction, 2-axis Digital Readout (DRO), and comprehensive standard equipment, this universal lathe is an ideal solution for toolrooms, maintenance workshops, repair facilities, and technical training centers. Key Features Rigid construction with a 160 mm wide bed provides excellent stability, vibration resistance, and machining accuracy. 2-axis Digital Readout (DRO) with optical scales on the longitudinal and cross axes improves positioning accuracy and process control. 38 mm spindle bore allows machining of larger-diameter shafts and bar stock. Precision carriage assemblies with 0.1 mm / 0.5 mm graduated handwheels ensure accurate and repeatable feed movements. Automatic longitudinal and cross feeds increase productivity during repetitive machining operations. Wide threading range – metric threads from 0.25–7 mm and imperial threads from 4–120 TPI without the need to change change gears. 1.1 / 1.5 kW induction motor delivers high torque and reliable performance during continuous operation. Integrated coolant system and 2-axis DRO supplied as standard improve operator comfort and machining efficiency. Construction and Technology The CORMAK 330 × 915 features a modern drivetrain with a headstock gearbox equipped with hardened and precision-ground gears, ensuring quiet operation, high durability, and long service life. The induction-hardened and precision-ground guideways maintain their geometry and accuracy even after years of intensive use, providing consistently high machining precision. Precision and Performance The lathe offers excellent carriage positioning accuracy, while the offset-adjustable tailstock enables precise taper turning. The swivelling compound slide allows accurate machining of angled surfaces and complex profiles. The Digital Readout (DRO) provides continuous position monitoring, improving accuracy and minimizing operator errors. Technical Specifications Specification Value 3-jaw chuck 160 mm Swing over bed 325 mm Swing over cross slide 208 mm Distance between centers 915 mm Maximum workpiece length 830 mm Nodpfx Agsm Nb Srj Iown Bed width 160 mm Spindle bore 38 mm Spindle speeds 12 ranges, 65–1650 RPM Spindle taper MT5 Tool post dimensions 78 × 78 × 20 mm Maximum tool size 16 × 16 mm Top slide travel 100 mm Cross slide travel 153 mm Longitudinal carriage travel 750 mm Metric thread range 0.25–7 mm Imperial thread range 4–120 TPI Longitudinal feed rates 0.087–2.218 mm/rev Cross feed rates 0.019–0.471 mm/rev Tailstock quill travel 75 mm Tailstock quill diameter 32 mm Tailstock taper MT3 Main motor (S1/S6) 1.1 / 1.5 kW, 400 V Coolant pump power 40 W Machine dimensions (L × W × H) 1770 × 740 × 1600 mm Weight 390 kg ±2% Standard Equipment Precision MT3 live center Fixed steady rest Follow rest Machine stand 2-axis Digital Readout (DRO) with optical scales 160 mm 3-jaw chuck External jaws MT3 dead center Factory-installed change gears Coolant system Oil can Complete service tool kit CE-compliant safety guards User manual CE Declaration of Conformity

Condition: not inspected (used), Please see technical details on photo. Nwjdpjhvzxzofx Ag Ijn

Condition: new, functionality: fully functional, machine/vehicle number: 8153336470, overall weight: 616 kg, volume flow: 399 m³/h, pressure (min.): 4 bar, pressure (max.): 13 bar, noise level: 67 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, We are a company specializing in the compressed air industry for over 20 years. Professional level of service and high quality goods offered by our company - "proven" on the market - guarantee successful cooperation with you. We offer NEW screw compressor Atlas Copco GA37VSDs FF (variable speed with built-in dryer) Machine equipped with frequency converter (inverter), manufactured based on the latest technologies, which translates into greater efficiency and performance: On average 20% lower unit energy consumption (SER) than in previous models of the GA VSD series. Ecological and efficient VSD+ variable speed drive system reduces energy consumption by an average of 50% compared to models that operate at idle speed. Regardless of energy savings, efficiency (FAD) increases by up to 12%. Efficient fan motor (compliant with the ERP 2015 directive) reduces energy consumption and noise level. Superior Motor Efficiency (iPM) up to 94.5% exceeding IE3 efficiency levels. Built to work hard for your success. The industry-leading GA Series oil-injected rotary screw compressor delivers unmatched efficiency, high productivity and low cost of ownership – even in the harshest conditions. Technical data: capacity at 4 bar: 15.69- 13.75 l/s / 0.94-7.85 m3/min capacity at 7 bar: 15.67-129.35 l/s / 0.94-7.76 m3/min capacity at 10 bar: 15.68-110.79 l/s / 0.94-6.65 m3/min Max pressure 10 bar (13 Bar variant on request) Voltage 400 V Motor 37 kW Noise 67 dB(A) Weight 616 kg Motor with internal permanent magnets (IPM) Compression element Direct drive Innovative fan Separator/oil filter with durable construction Electronic water drain valve that does not cause compressed air losses Controller Elektronikon Inlet valve VSDs module Manufacturer code: 8153336470 If you are not sure whether the device is right for you, you have not found the right compressor, CALL! We will advise you on the right choice of device. Nedpfewlp Hdsx Ag Iswn We invite you to familiarize yourself with our full offer.

Condition: reconditioned (used), functionality: fully functional, center height: 160 mm, center width: 650 mm, rotational speed (max.): 4,000 rpm, Equipment: rotational speed infinitely variable, Dear Sir or Madam, For sale is a Weiler Primus VC / Praktikant VC lathe. This model series is particularly distinguished by its Siemens control panel and completely stepless speed control. As the name suggests, the VC can operate at a constant cutting speed. The machine has undergone a comprehensive partial overhaul in our workshop, so it is in excellent technical and visual condition. All guides are in working order, the gears run quietly, and the levers shift easily. You are welcome to visit us to see the condition for yourself. Availability: upon request Nsdpfx Ajwhx I Nog Ijwn Center height: 160 mm Center distance: 650 mm Spindle bore: Ø 40 mm Tailstock taper mount: MT3 Quill stroke: 85 mm Possible thread types: Metric, inch, module, diametrical pitch Metric thread pitches: 0.25 - 8 mm Spindle brake: switchable Voltage: 400 V Dimensions: approx. 1.60 x 1.00 x 1.50 m (L x H x W) Weight: approx. 750 kg Other equipment and accessories: Siemens control panel, coolant system, chuck guard, lead screw and feed screw covers, 2 emergency stops, operating instructions, CE declaration of conformity, and much more upon request... Our service promise to you: - We are a certified master craftsman in the field of mechanical engineering - All machines undergo at least a workshop inspection - All lubricants and any worn parts will be replaced in advance. - Upon request, we can fully or partially overhaul the selected machine. - Upon request, we can repaint the selected machine in your desired color. - Upon request, you can order additional accessories such as tools, etc. directly. - Upon request, we can install additional accessories such as safety devices, etc. - We are happy to take care of shipping and/or delivery.

Year of construction: 2017, condition: ready for operation (used), Offered is an OptiMill MF 4V milling machine, almost new, 100h. Year of construction 2017, travel ranges X/Y/Z: 800mm/320mm/400mm, stepless spindle speed 9-6750rpm in 8 speed ranges, with electronic speed control, quill stroke: 127mm, 3-axis digital display DPA21, right/left rotation reversing switch, drilling depth stop, cross table X/Y 1244mm/230mm T-slot 16mm, chuck guard, coolant system, manual central lubrication, universal compressed-air tool clamping system ISO 40, stepless table feeds in X/Y, weight approx. 1200kg. Viewing is possible by arrangement. Nwedpfsxyk Ucex Ag Ijn

Condition: used, Year of construction: 2020, workpiece weight (max.): 5 kg, table width: 267 mm, table length: 1,466 mm, table load: 159 kg, tool diameter: 89 mm, Used Machining Center Brand: Haas Model: TM-2P Year: 08/2020 Serial Number: 1170479 Operating hours: Spindle on time: 12,000h Specifications: - Travels (X, Y, Z): 1016mm, 406mm, 406mm Nwsdpfx Asxqc H Sog Isn - Spindle to table distance (Min. - Max.): 102 - 508mm - Spindle speed: 6000 rpm - Spindle power: 5.6 kW - Taper: BT 40 - Tool changer carousel: 10 positions - Maximum tool diameter: 89mm (adjacent) - Maximum tool weight: 5.4kg - Coolant pump kit - HAAS CNC - Table dimensions: 1466x267mm - Maximum table load: 159kg - Maximum feed rates on all three axes: 10.2m/min.

Condition: good (used), Year of construction: 1997, Also available CONQUEST T51 model The used HARDINGE CONQUEST T42L 3-axis motorized CNC lathe is a robust and precise medium-sized inclined bed numerical control lathe, turning length approximately 700mm, bar passage 42m, automatic turret with 12 positions with motorized tools, FANUC 18-T CNC with color LCD and RS232 serial interface for data transfer 5″ ASA spindle maximum revolutions: 4,200 rpm continuous C-axis Nwodpsvtrc Ssfx Ag Ion 20HP spindle power X-axis travel: 172mm Z-axis travel: 575mm machine weight 4,000 Kg. Complete with 210mm AUTOBLOCK hydraulic chuck, tool presetting, programmable tailstock, 2 motorized tool holders (1 axial and 1 radial), chip evacuator, set of fixed and manual tool holders and backup disk; Year of construction 1997; machine compliant with “CE” standards, in excellent condition.