Carpentry machine

Graule 200 NF

Condition: new, Year of construction: 2025, Crosscut and Mitre Circular Saws Type ZS 200NF Crosscut and mitre circular saw with a maximum cutting height of 200 mm Robust grey cast iron construction Precise ball bushing guidance of the tool carriage on hardened and ground steel shafts Manual saw feed Quick mitre adjustment up to 65° horizontally and 60° vertically Adjustable fixed stops Lower saw blade guard connectable to extraction system Machine mounted on mobile machine base with 1.5 m long roller conveyors on both sides (left and right) Left side equipped with scale and stop slider Technical Data Motor 400 V / 5.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Mitre range horizontal 45°- 90°- 25° Mitre range vertical 60°- 90°- 30° Saw blade Ø Bdsdpfxjw Hl Aqs Ab Tok 520 mm (not included as standard) Extraction port 100 mm Weight 490 kg Location: In stock at 54634 Bitburg - Immediately available - On request, we are happy to offer the saw blade as well.

Condition: new, feeder 4 rollers roller DM 120 mm roller width 60 mm motor power 0,75 kW motor speed 1.400 U/ min feeder speed 3 - 18 m/min, variable weight approx. 37 kg without stand optional with stand ‘standard’ or ‘stand 1050’ Bedsh Dikwepfx Ab Tedk Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, Year of construction: 2024, functionality: fully functional, 7.5 HP 200 mm cutting height 1Hydraulic feed brake Tiltable to the left up to 60°, to the right up to 30°, tiltable from the front using a hand crank cutting height 140 mm at 45° inclination Tiltable to the left up to 60° to the right up to 45 Cutting length at 90° - 420 mm Cutting length at 45° - 295 mm Length of the unloading roller conveyor with scale and stop slide left - 6000 mm Bjdpfx Aob Dkyvob Tedk Length of infeed roller conveyor 2000 mm, attachment side right Machine completely mobile, total length 9000 m inclinable from the front with hand crank, machine is also available with 215 mm or 240 mm cutting height and other options,

Condition: new, Year of construction: 2024, Product detail Crosscut and mitre circular saws Type ZS 200NF Crosscut and mitre circular saw with maximum cutting height of 200mm solid cast iron construction precise ball-bearing guide of the tool slide on hardened and ground steel shafts manual saw feed fast mitre adjustment up to 65° horizontal and 60° vertical readjustable fixed stops lower saw blade protection connectable to suction unit machine mounted on mobile machine base with 1,5 mtr. long roller conveyors left and right side left side with scale and stop slide technical data Motor 400 V / 5.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Mitre range horizontal 45°- 90°- 25° Mitre range vertical 60°- 90°- 30° Saw blade Ø 520 mm ( not included in standard ) Suction nozzle Bedpfxscnz Rvj Ab Tjdk 100 mm Weight 490 kg Location: Ex stock 54634 Bitburg - Immediately available - On request we can also offer you the saw blade.

Condition: new, A heavy duty German built radial arm crosscut saw with swivel and tilting capability and a large cutting capacity of up to 200mm deep. A unique feature on this model of machine is that when angle cutting is required the saw unit pivots about a central point thus always maintaining the same cutting length. Both optional vertical (tilting) and standard horizontal (swivel) angles can be adjusted manually with either graduated scales or with an optional digital display unit for reading the position. The saw is also available with an optional automatic NC positioning system with 4 memorised pre set positions. The machine is ideally suited for easy and accurate cutting of compound angles for furniture and joinery components. The machine can be specified to cut wood, aluminium, plastics or composite materials. Precision ball bearing movement on hardened steel runners. Sturdy cast iron construction with steel base stand Heavy duty 5 KW motor. Spring return of saw carriage. 1 x 520mm dia TCT x 4.4mm kerf x 50mm bore - 60 teeth WZ saw alternate bevel. 50mm spindle diameter. 22 - 90 - 45 horizontal movement. (Swivel) 30 - 90 - 60 vertical movement. (Tilt - optional N model) Adjustable upper protection. Bsdpfx Abedy Hm Nj Todk 520mm TCT sawblade Z60. Cutting Capacity: 420 wide x 200mm deep at 90 degrees. 295 wide x 200mm deep at 45 degrees. 420 wide x 140mm deep at 45 degrees. (Tilt- optional N model). Dust extraction outlet 100mm. Working height of table 900mm

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 7,900 h, machine/vehicle number: #652, load capacity: 350 kg, mast type: telescopic, lifting height: 28,000 mm, platform length: 1,800 mm, platform width: 800 mm, overall weight: 7,490 kg, transport length: 7,550 mm, transport width: 2,500 mm, construction height: 3,450 mm, Attention: This rental fleet machine is expected to become available in January 2026. Working height: 30.00 m Platform height: 28.00 m Lateral reach: 20.50 m Overall length: 7.55 m Overall height: 3.45 m Overall width: 2.50 m Platform capacity: 350 kg Permissible total weight: 7,490 kg Work basket (l x w x h): 1800 x 800 x 1100 mm Swivel range: 540° Basket rotation: +/- 85° Stabilizers: 2.56 / 3.90 / 5.10 m Other: - Basket arm 195° - Crank rotary table - Automatic basket arm rest - Roof protection grid 04/2024: Clutch + master-slave cylinder replaced and oil pan & fuel filter sealed 09/2024: Right joystick module replaced Bdodpfxownq Dps Ab Tjk 10/2024: Fuel filter, basket tilt sensor replaced 11/2024: Rotary encoder replaced 01/2025: 2x truck battery replaced 04/2025: Solenoid coil As of 28.04.2025: approx. 73,000 km, approx. 7,900 operating hours Price: ON REQUEST

Condition: excellent (used), Gitterbox, load carrier Collapsible Color: green Floor: flat steel plate External dimensions: 1600x1200x1000 mm Weight: 150kg Bdodpfx Abelcct Se Tek

Condition: used, machine/vehicle number: 11481, Rotor diameter: 300 mm Rotor width: 600 mm 3-blade rotor 4 rows of stator blades Inlet cross-section approx. 250 x 600 mm Bjdpfx Ajghgmzeb Tjdk Drive motor 37 kW

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Complete weinmann prefabricated house production line for sale. The production line consists of the following machines: - Weinmann CNC frame assembler ( WBM 150/12 ) - Weinmann multifunctional bridge ( WMS 10 ), which has 4 aggregates (end mill, circular saw and 2 staplers with Senco staplers). - Weinmann butterfly table with hydraulic lifting and panel feed ( 10m ) ( WTW 10 ) - Weinmann butterfly table with hydraulic lifting, panel feed and cross movement ( 10m ) ( WTW 10 ) - Weinmann butterfly table with hydraulic lifting and cross movement ( 10m ) (WTW 10 ), - Weinmann manually operated sorting table ( 10 m ) - roller rows between tables ( 2 + 6 pcs ) - foil support roller ( 1 pc ) Possible dimensions of wall panels: width 0.8m -3.2m, length: up to 10m, wood thickness: 8cm-24cm. The production line capacity is about 80-100 pcs 100m2 houses / year / shift. In two shifts the capacity is double this. Bdsdpfxewi Rg Tj Ab Tjk The production line is extremely fast, constantly maintained, well-kept, and in excellent condition. The production line includes a steel-structured wall panel warehouse, which can be dismantled and purchased separately (price not included): - 21.5 X 28 m steel-structured wall panel warehouse with 980-m rails and 300 cars. (Suitable for storing 8-10 houses) Additional information: a Hundegger K2 CNC cutting machine and a Hundegger Speed Cut CNC high-speed cutting machine, a Wolf press table (3.5-m X 30-m), as well as the entire Hungarian factory with real estate (39,000-m2 industrial site, 4,000-m2 industrial hall) with complete infrastructure are for sale at a favorable price. The factory is currently operating.

Condition: new, Year of construction: 2025, Cut-to-length and mitre saw type: ZS 200 N - 5 KW motor with machine stand, Machine via handwheel and worm gear (rear) Tiltable Saw blade diameter 520 mm, saw blade mounting hole 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake and automat. Star delta motor control Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: swiveled: 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees inclined: 140 mm Saw can be swiveled on one side up to approx. 25 degrees to an acute angle and tilted flat to the left up to 30 degrees Carbide circular saw blade 520x4.0/2.8 x 50 mm 60 WZ neg. for wood RLH-ST60 6.0 mtr. measuring length, mounting side: left Cross-cut fence / roller conveyor, heavy-duty design, Stop slide adjustable from the workstation via handwheel, electronic-digital dimension display, pneumatic clamping of stop slider, stop flap folds backwards, with steel rollers 60 mm diameter, roller spacing 200 mm, 400 mm roller width, with 4 support feet and connection piece: overall length: 6.7 mtr. Surcharge for digital electronic display unit type: FIAMA EP6 for 230 V mains operation, with electric on/off switch and socket. Powerful dark red LED display. Higher accuracy than the battery-powered crystal display RO-ST60 4.0 m long feed roller conveyor Mounting side: Right Heavy-duty design, steel rollers: 60 mm Diameter, roller spacing: 200 mm 400 mm roller width, 3 support feet and connection piece Bdjdpok H Ic Usfx Ab Tsk Location: From stock 54634 Bitburg - immediately available - Picture: similar. Machine is still in original packaging