Firewood cutting machine

Pezzolato TLC 900

Condition: new, High-performance Firewood Processor with 20 Tons of Splitting Force - Brugger SA48 Pro! The Brugger SA48 Pro log splitter is the perfect solution for quickly and effortlessly processing logs with a diameter of up to 48 cm into high-quality firewood. Its well-thought-out yet simple design distinguishes this machine, which not only requires low maintenance but also facilitates repairs. This impressive device is equipped with either a powerful 14 HP Kohler petrol engine or a 9.5 kW 400V electric motor. The SA48 Pro does not rely on electronic control but is operated purely by mechanical components such as hydraulic valves with levers. Specifications: Maximum cutting length: 55 cm Maximum diameter: 48 cm Splitting force: 20 tons 55 cm bar Extra-wide 3.2 m conveyor belt Hydraulic feed up to the chainsaw Pivoting conveyor belt Automatic chain lubrication Despite its high splitting force and large diameter capacity, the log splitter remains relatively compact. Equipped with a drawbar, it can be attached to any trailer hitch, allowing for easy transportation. Additionally, two people can easily move the log splitter by hand on a flat surface without the need for a vehicle. Ksdpfepz I Ncox Agrond The length of the firewood can be adjusted continuously up to 55 cm. The splitting wedge can be manually adjusted in different positions using a lever, allowing for 2-way, 4-way, or even 6-way splitting, depending on the thickness of the wood. Optional equipment such as the log lifter or chain conveyor further facilitates the work process. The chain conveyor allows for loading multiple logs using a forklift, crane, or front loader, eliminating the need to lift one log at a time. Prices: Brugger SA48 Pro: €9,749 6-way knife: €199 8-way knife : €299 Additional PTO drive (for electric or gasoline): €949 Log lifter: €1,498 Chain infeed log deck: €1,898

Condition: used, Year of construction: 2008, Bioflamm SR-EB9 wood chip boiler, moving grate furnace, year of manufacture 2008, a new heat exchanger was installed in 2018, output 830 kW, hot water system max. temperature 120°C, incl. feed auger with backfire protection, incl. fuel chain conveyor, incl. 2 pcs push floor containers of 30m³ each, incl. automatic ash removal, incl. hydraulic unit, incl. control system, dismantling must be carried out by the buyer. Kedpfovytfujx Agrjnd

Condition: new, Year of construction: 2025, Engine 7.5 kW, 50 Hz, 380 V, 3 phases Splitting pressure 20 tons Automatic saw yes Maximum trunk diameter 38 cm Maximum tree length 61 cm Feeder length 1.8 m Chain saw / splitter drive hydraulic max. 4800 rpm Saw and feeder control hydraulic Conveyor with winch 3.2 m length / 250 mm width Knedpfx Agov Dvhyored Conveyor belt tilt angle ±15° (manually set) Conveyor belt speed 0.8 m/s Chain saw 22" Cylinder diameter 4" Conveyor belt length 3.2 m Cycle time 6 seconds Trailer wheel 12" 4-arm splitting wedge Hydraulic oil capacity 32 L Weight 737 kg The machine is placed on a wheeled chassis with a ball hitch. The saw-splitter is equipped with a 3.2 m long belt feeder that can transport processed wood directly to the trailer, the maximum height of wood feeding by the conveyor is 2 m The machine's capacity is about 5 - 8 cubic meters of wood per hour. Depending on the type wood. The machine can use various optional accessories, such as a hydraulic log feeder, wedges.

Condition: used, Year of construction: 2004, functionality: fully functional, cutting length (max.): 8 mm, Equipment: cabin, Complete Artiglio log saw with Eagle 1100/I carriage. It has been maintained by Artiglio in 2018. It is in excellent condition. Kedpjv Sr U Eofx Agrsnd

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, working width: 230 mm, spindle diameter: 40 mm, working height: 120 mm, number of spindles: 6, Four-side planer and moulder Manufactured by Weinig Type: Hydromat 23C Year of manufacture: 2005 Working width: 230 mm Working height: 120 mm 6 spindles Spindle arrangement: bottom/right/left/top/top/bottom Spindle motors: 7.5 kW each Automatic table lubrication Automatic Memory System control system Spindle diameter: 40 mm Knsdpfev T R A Dsx Agred Spindles with bearings on both sides The last two heads are equipped with jointers

Condition: excellent (used), Weinig Unimat 500 four-sided planer Working width 230mm Working height 140mm Number of spindles 6 Spindle arrangement: 1.Bottom 7.5kw 2.Right 7.5kw 3.Left 7.5kw 4.Top 11kw 5.Top 11kw 6.Bottom 7.kw Total power 56kw Feed speed adjustable on inverter Kedpfxjthk T Io Agrjnd Memory system Pneumatic pressure divided into 3 sections 4 rows of metal material feed rollers 2 rows of rubber drawing rollers 1 roller in the tabletop driven by a cardan shaft Length of input table top 1980mm Worktops made with Marathon Coating technology CE certificate Extraction stubs 6x140mm Machine dimensions 394x185x195cmH

Condition: used, Year of construction: 1994, SECOND-HAND 5 SPINDLES MOULDER WEINIG MOD. PROFIMAT 23 - Working width 230 mm - Working height 120 mm. Composition : - horizontal bottom - vertical right - vertical left - horizontal top - horizontal bottom Knsdpfx Ajrm Rxwsgrjd Year 1994 V 380/50

Condition: excellent (used), Year of construction: 2012, operating hours: 1,000 h, functionality: fully functional, cutting height (max.): 160 mm, height adjustment type: hydraulic, Technical Description – Double Edger PAUL KME-750-L (Year of Manufacture 2012) The machine offered is a double edger of the type PAUL KMEZ-750-L, year of manufacture 2012. The machine is in good condition and ready for immediate use. It is ideally suited for precise edging of wood in industrial applications. Technical Data: • Machine No.: 12242770 • Year of manufacture: 2012 • Net weight: approx. 1,500 kg Drive & Electrical: • Connected load: 38 kW • Supply voltage: 400 V / 50 Hz • Rated current: 71 A • Circuit protection: 80 A • Control voltage: 24 V DC Saw technology: • Saw blade speed (min/max): 250 / 380 rpm • Bore diameter: 75 mm • Saw motor speed: 3,200 rpm Hydraulics & Pneumatics: • Hydraulic pressure: 60 bar • Pneumatic pressure: 6 bar Equipment: Knjdpexpua Usfx Agrjd • Infeed rollers for easy material feeding • Integrated alignment scanners for automatic positioning • Batten sleeve • Waste block separator • Outfeed table for orderly material discharge This high-quality machine from PAUL is designed for continuous use in industrial wood processing and is equipped with practical additional features that enable efficient workflow.

Condition: good (used), Year of construction: 2002, operating hours: 123 h, functionality: unexamined, heating capacity: 350 kW (475.87 HP), Mawera Type FU350RIA, fully automatic wood-fired boiler, bottom-feed firing, output: 350 kW. Hot water system, maximum flow temperature 95°C. Year of manufacture: 2002. Parts: boiler body: combustion chamber and heat exchanger, automatic feed screw, multi-cyclone, flue gas fan with piping to the chimney, operating instructions, Logic control system. Already disassembled. Viewing: possible by appointment in Budapest. Knedjwa Ax Aepfx Agrsd

Condition: excellent (used), Weinig Unimat 23 four-sided planer Working width 230mm Working height 160mm Number of spindles 5 Knsdpfx Agetxxwderod Arrangement of spindles Bottom 5.5kw Right Left 7.5kw Top 11kw Bottom 5.5kw Pneumatic material presses divided into 4 sections Feed speed adjustable by variator 4-24m/min Length of input table 1980mm Drive on cardan shafts Thick soundproof cabin Machine dimensions 380x226x178cmH CE certificate