Used Hundegger for sale (29)

Condition: used, Year of construction: 2005, functionality: fully functional, I am offering a rare Hundegger K3 for sale. The machine is operational and can be inspected by appointment. The K3 was manufactured in 2005 and comes with the following equipment: - Infeed and transfer cross conveyor - Offcut holder in front of the saw - Underslung swivel crosscut saw - 5-axis universal milling unit (UF5) - Combination support for vertically operating tools 2 reinforced vertical drilling units - Combination support for horizontally operating tools Slotting unit 1 standard drilling unit 1 drilling unit swiveling at 45 degrees - Fully automatic hydraulic beam turning station - Marking unit on stop side - Marking unit on operator side - Underside marking device - Additional monitor in the outfeed area - Deposit table for short components - Top feed roller Nkodpfjyvplnox Ahvew The machine must be dismantled by the buyer. Pickup only from company premises.

Condition: used, Year of construction: 1994, machine/vehicle number: 1301, functionality: fully functional, I am offering for sale a Hundegger P-10 woodworking machine, designed for processing roof beams. The machine is fully operational and still in use; demonstration under power is possible. Maximum cross-sections: 260 x 400 mm. Year of manufacture: 1994. Included with the machine: - Under-table cross-cut saw - 2 marking pencils - 3 large milling cutters - 1 finger joint cutter - 2 drill bits + nail drill - 4 chain mortisers Service carried out on 10/6/2025. A large number of spare parts are included. Please do not hesitate to contact me for more information. Nedpew I Emkjfx Ahvjkw

Condition: ready for operation (used), Year of construction: 2002, This 4-axis HUNDEGGER K2 was manufactured in 2002, designed for efficient wood beam processing. It features a loading area with motorized chains, a maximum beam length of 13,500 mm, and a working section up to 440 mm × 240 mm. Includes a circular saw and universal milling unit, both with 4 axes, alongside versatile drilling units. Ideal for complex woodworking tasks. Contact us for more information about this machine. • CNC designed for wood beam processing • Maximum incoming beam length: 13,500 mm • Maximum outgoing beam length: 12,000 mm • Maximum working section: 440 mm × 240 mm • 2 independent clamps for transport and positioning (“two-hand” system) • Circular saw unit, Ø 750 mm, 4 axes • Universal milling unit with double output, 4 axes • Lower vertical drilling unit with multi-purpose support • Horizontal drilling unit with multi-purpose support, tilting • Long horizontal chain saw unit, 700 mm, with counter-support system Nksdpfxsyaq Dxo Ahvsw • Includes tool change equipment • Independent control panel • CE compliant Additional equipment • Loading area with 7 motorized transverse chains • Unloading area with 6 arms for parking and storage of parts

Condition: ready for operation (used), Year of construction: 1998, CNC Wood Machining Centre manufactured in 1998. This HUNDEGGER K1 features a maximum workpiece length of 13,000 mm, a workpiece width of 450 mm, and a thickness of 300 mm. It includes various milling and drilling units, along with a ReaJet printer for material marking. If you are looking to get high-quality wood machining capabilities, consider the HUNDEGGER K1 machine we have for sale. Contact us for further details. • Max. workpiece width: 450 mm • Max. workpiece thickness (height): 300 mm • Max. workpiece length: 13,000 mm (13 m) Nkedpfx Ahjymz Uhjvew Additional equipment • Cylindrical milling cutter 350 mm x 80 mm (new type) • End mill 160 mm x 40 mm – 2 pieces • Circular saw blade – 2 pieces • Dovetail cutter mounted on the cylindrical milling cutter • End mill 100 mm x 30 mm mounted on the horizontal unit • Chain slotting unit • Drilling units: 2 vertical, 1 horizontal • ReaJet printer for printing markings on the material • Cylindrical cutter Ø 265 mm for corner joints, mounted on the main unit • Vertical ink marker at the machine exit

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, SPM2 - 2600 - 2600 Can be inspected during operation. Training possible on request Njdsu H Uqcepfx Ahvskw - Automatic panel infeed - Lifting table 2600 x 6000 Aggregates - SPM-FF6-23U Finger router 6 Kw max. 23170 rpm - SPM-KSK3 4-axis circular saw unit 3 kW saw blade 220mm - SPM-5F 5-axis milling unit 6.0 kW (special motor 24,000 rpm - 5-axis unit) - SPM-IJ Ink marking system - InkJet HP system Component delivery - SPM-SHP-6000 Special lifting table Panel removal 2600 x 6000 - Access guarding of discharge area

Condition: used, Year of construction: 1997, cutting height (max.): 300 mm, cutting width (max.): 450 mm, saw blade diameter: 800 mm, working width: 450 mm, We are offering this used Hundegger K1-A joinery line, model Hundegger K1, year of manufacture 1997. Type: K1-A Machine number: 1647 Year: 1997 Equipment includes: - Infeed cross conveyor with flat chain belts Nsdpfxjynwx Ej Ahvskw - Under-table tilting cross-cut saw, blade diameter 800mm - 4-axis universal milling unit with finger cutter and dovetail cutter Combined support for vertically-operating tools: - Drilling unit - Vertical finger milling unit Combined support for horizontally-operating tools: - Drilling unit - Drilling unit - Slotting unit - Rear marker - Automatic turnover device - Various milling heads Component dimensions from 20x60mm up to 300x450mm. Feel free to contact us with any questions!

Condition: excellent (used), Year of construction: 2008, Hundegger K2i 625x300mm under-table crosscut saw, 11KW saw blade 800mm, universal 5-axis milling unit, combination support for vertically operating tools, combination support for horizontally operating tools, drilling unit 2.2KW (1x vertical 18mm x 460mm and 2x horizontal 7mm/8mm x 650mm). Fully automatic hydraulic beam turning station, K2i transport and positioning device, electronic control system, 6-arm outfeed table, vertical finger joint cutter 5.5 KW, longitudinal and cross groove cutter 15.5–30mm, marking and labeling devices (bottom and rear), refined (chrome-plated) support surfaces, left and right height-adjustable safety guard plate, saw blade 900mm. The system is ready for demonstration. Availability: Autumn 2026. Nsdpoww Nuxsfx Ahvekw

Condition: used, Year of construction: 2008, functionality: fully functional, overall weight: 24,000 kg, I am selling a Hundegger K2i carpentry centre from 2008. The machine is in very good condition and well equipped, including: - 13 m infeed table - Beam clamps with chain drive - 5-axis sawing unit with new 800 mm saw blade - 5-axis milling unit with finger cutter, new 60 mm cutter, and new dovetail cutter - Horizontal and vertical drilling - Additional end milling unit for rafter tails from underneath - Slotting attachment with a complete set of 8 and 10 mm chains Note: The slotting attachment is rare equipment, used for the production of trusses with concealed plates. The machine is in excellent technical condition, regularly serviced, and has been in continuous operation. Nkedpfx Aexx T Rdohvow We are selling due to purchase of a much newer unit. Availability: immediate. We offer disassembly and installation for €10,000.

Condition: used, Year of construction: 2003, functionality: fully functional, working width: 4,400 mm, Used CNC joinery machine by HUNDEGGER, model PBA, year of manufacture 2003. It can process element sizes up to 4.40 m width, 16.50 m length, and 240 mm thickness. Pre-cutting of elements is carried out with the 5-axis chainsaw and re-planed with a roller milling cutter. All processing units, except for the 5-axis circular saw retrofitted at the end of 2010, can handle panel thicknesses up to 240 mm. The 5-axis circular saw can cut continuously up to approximately 240 mm panel thickness at standard feed rates. Equipment: - 5-axis chainsaw 15 kW - 5-axis circular saw 11 kW Nksdpfx Ahoylxfujvjw - Vertical milling unit 22 kW - Vertical milling unit 22 kW - Vertical drilling unit 4 kW - Gantry width: 6960 mm - 18 m guide rail - Processing table height: 700 mm - Frequency converter for 35 kW - Without processing table – it can be self-constructed from cross-laminated timber Dismantling and collection to be arranged by the buyer.

Condition: like new (used), Year of construction: 2015, I sell the automatic CNC working centre for wooden constructions Hundegger K2i. Almost new machine. Year 2011. Under-table rotary saw with saw blade from 750 mm to 800 mm, 360 degree rotation, servohydraulic tilting 0 – 65 degrees universal 5-axis unit equipped with cylindrical milling cutter, end mill and end mill, milling head diameter 350 mm x 100 mm end mill combi support for at least 5 tools with horizontal drilling device up to power from 2.5 to 3.0 kW, drilling diameter max 24 mm, drill length min 460 mm, machining depth min 300 mm combi support for at least 5 tools with horizontal drilling device up to power from 2.5 to 3.0 kW, drilling diameter max 24 mm, drill length min. 460 mm, machining depth min. 300 mm positioning and gripping of the material using arms, which, while the material is measured, transported to the desired location, the arms keep the processed element as close as possible to the tool that processes it for stability. the processed material can be rotated automatically tolerance +/- 2 mm at a length of 13 m Fully automatic wood input with input roller track and input and sliding cross conveyor K2i: Under-table tilting cross-cut saw K2i: Universal milling unit – 4-axis (UF4) K2i: Kombisupport for vertically working tools K2i: Drilling device (2.2 kW) – vertical drilling direction K2i: Kombisupport for horizontally working tools K2i: Drilling device (2.2 kW) – horizontal drilling direction K2i: Marking tool (rear or on the user side) K2i: Fully automatic element rotation – hydraulic K2i: Transport and positioning system “two-hand system” K2i: Electronic connection Nkodpsxtxkxsfx Ahvsw K2i: Roller track for removal wooden elements with a pusher K2i: 5-arm storage table K2i: Safety device K2i: Higher quality upper surface of the machine K2i: Extension of the K2i frame to 13.56 m K2i: 5-axis universal milling unit - UF5 (increase to 4-axis) K2i: Remote maintenance (including portable video camera) K2i: Dovetail milling machine (with rotating knives) 60x28x16.5 Suitable for wooden house constructions! Available immediately.

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece width (max.): 1,300 mm, workpiece height (max.): 300 mm, Contract manufacturing in the timber sector on a Hundegger CNC system Njdpfx Ahjykyhuovskw Contract manufacturing in timber construction – prefabricated timber structures, prefabricated houses, and log houses on our Hundegger Robot-Drive 1300 CNC processing center. Holzbauzentrum.at ADVANTAGES: - Can be individually adapted to specific requirements - 5-axis saw-slotting-marking unit for increased throughput - Timber sections from 20 x 60 mm up to 300 x 1,300 mm - 6-axis technology = machining of 6 component sides in a single pass - 6-axis technology = use of 24 different tools - 6-axis technology = unprecedented machining possibilities

Condition: good (used), Year of construction: 2005, functionality: fully functional, feed length X-axis: 22,000 mm, total length: 22,000 mm, saw blade diameter: 760 mm, working length: 22,000 mm, working width: 650 mm, Description: For sale: K2 650mm CNC machining centre, year 2005, 5-axis machine, ideal for industrial carpentry, timber framing, and woodworking applications. Machine fully serviced, operational, and in regular use. Key Features: • 5 axes • Automatic workpiece turnover system • Infeed 22 meters / Outfeed 20 meters • Integrated crosscut saw with pneumatic end-of-chain clamping • Saw blade Ø760 mm (360° rotation) • Universal cutterhead Ø350 mm – thickness 80 mm • Universal cutterhead Ø350 mm – thickness 45 mm (additional) • Universal cutterhead Ø350 mm – thickness 100 mm (additional) • Universal cutterhead / router Ø40 mm • Universal cutterhead / dovetail milling (cutter Ø45/60 mm) • Vertical router (cutter Ø8 to 30 mm) • Inclined horizontal drilling unit (0 – 45° angle), max drill length 650 mm • Horizontal drilling unit, max drill length 650 mm • Vertical drilling unit, max drill length 460 mm Condition & Services: • Comprehensive overhaul completed in June 2024 • Industrial cabinet PC Pyramid with Windows 10 installed 18/11/2025 (invoice available) • New operator console as of 04/2022 • Machine in daily working condition • Option for dismantling and reassembly by manufacturer – estimated cost: €25,000 (includes installation and hotline support) Nksdpfxeyimi He Ahvow If you have questions or require further information, please do not hesitate to contact us by message or phone.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, working width: 450 mm, Equipment: safety light barrier, TECHNICAL DETAILS Nkedpfx Ahjyfhi Nevsw Working width: 450 mm (limited processing up to 520 mm possible) EQUIPMENT - Safety light barrier - Saw - Universal milling unit with roller cutter - Dovetail cutter - Finger joint cutter - Drilling units: 1x horizontal + 2x vertical - Slotting device - Marker on stop side - Automatic beam turning station - Wood length is now processed in the feed up to 16m - Control computer with EKP program included

Year of construction: 2002, condition: used, functionality: fully functional, Used HUNDEGGER K2-625 for sale. For sale: Hundegger K2 CNC machine with 4 axes, designed for machining wooden beams up to 13m, featuring 2 independent work clamps for sections up to 625mm x 300mm. Equipped with a circular saw unit (800mm), universal milling unit with finger bit and Milano cutter, interchangeable vertical milling unit, horizontal chain saw for groove cutting, vertical drill and hydraulic unit for beam turning. Nkodpsycg Sqefx Ahvew Comes with compressor unit (ELGI EN11-9.5 2022) and air dryer (MKE 155 09/2022), ready for installation and use. CE compliant. Machine is in fully operational condition. Sold with tooling and spare parts. Price upon request. Videos available upon request.

Condition: good (used), Year of construction: 1995, functionality: fully functional, For sale: HUNDEGGER HM-3 planer. Suitable for machining beams from 15*30 mm up to 300*400 mm. Cutting depth: 10-12 mm. Compatible with HUNDEGGER CNC machines (p10, Speed-Cut). Well-maintained, kept in a workshop. For sale due to underutilization. We can assist with transportation. Please contact us with any questions. Nsdpfx Ahex Tu Dqsvjkw

Condition: good (used), Year of construction: 1995, functionality: fully functional, WORKING DIMENSIONS: Nkodpfex S E Hajx Ahvsw 400x250 mm 4 SIDES + EDGE BEVELERS

Condition: used, Year of construction: 2010, machine/vehicle number: 9532, total height: 3,000 mm, total length: 30,000 mm, total width: 3,000 mm, Hundegger SC-3 – CNC Through-Feed Processing Center (Year 2010) Hundegger SC-3 CNC Through-Feed Processing Center For sale is a Hundegger SC-3, year of manufacture 2010, a proven and high-performance CNC through-feed processing center for modern timber construction and industrial wood processing. This machine is ideally suited for timber framing, prefabricated housing production, and high-capacity woodworking operations, offering excellent precision, reliability, and productivity. Key Features: CNC-controlled through-feed processing center High level of automation and efficient material flow Nedpfx Ahox Rkrfovekw Accurate and reliable cutting of timber components Versatile processing options – with suitable optional units or by retrofit / upgrading, additional operations such as drilling, milling, slotting, marking, and labeling are possible Robust, durable design by Hundegger Technical Overview: Manufacturer: Hundegger Model: SC-3 Year of manufacture: 2010 Condition: used, in operational condition Location: Estonia Price: on request / according to listing The Hundegger SC-3 represents a cost-effective solution to increase throughput, precision, and process reliability in timber processing. 📩 Further technical details, documentation, and on-site inspection available upon request.

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 1779, The K1 was rebuilt in 2020 and equipped with the latest safety features. It is now dismantled and can be loaded immediately. Nkodox Ehmaopfx Ahvew

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 11441, At the moment we are working with the following version: 9.23.12.102733-12 The equipment of the K2: a 4-axis universal milling machine Nedpfxjwvih Ao Ahvskw 2 drilling rigs a finger cutter below a slotter Hydraulic beam turning station Machine is fully working, can be visiited upon agreed time. avaible from 30/11/2025 Disassembly from our company and loading to truck, and is included in the price. Sale is as a used machine with exclusion of any warranty.

Year of construction: 1993, condition: good (used), Hundegger planer Year of manufacture 1993 4 sides planer and chamfering machine Nodpfel Hw Ehox Ahvskw

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Hundegger Speed Cut SC1 CNC Njdpfx Ahjxftalsvjkw 2005 vintage, in good technical condition, looking for a new owner. Excellent for the production of nailed sheet metal roofs. Videos show the machine in operation.

Condition: used, Year of construction: 2002, functionality: fully functional, cutting width (max.): 625 mm, Hundegger joinery system with mechanization 5 axes Nkedov Ubtcspfx Ahvew Working width: 625 mm with tools

Condition: used, Year of construction: 1995, functionality: fully functional, For sale: Hundegger P10 machine, in continuous use. The machine was purchased used, directly from the manufacturer in Germany. Ready for further operation. Possibility to inspect the machine live during operation. Nodpfx Aexlla Dohvokw

Condition: excellent (used), Year of construction: 2004, Hundegger K2-5 five-head carpentry center. The machine is in perfect condition after service without backlash. Possibility to see it live during operation. Please contact me Nodowrd R Rjpfx Ahvjkw

Condition: refurbished (used), Year of construction: 2007, machine/vehicle number: 9286, functionality: fully functional, product height (max.): 450 mm, product height (min.): 40 mm, product width (max.): 160 mm, product width (min.): 20 mm, Drilling - Sawing - Slotting - Marking TECHNICAL DETAILS Minimum wood dimensions: 20 × 40 mm Maximum wood dimensions: 160 × 450 mm Wood length: any Positioning accuracy: ±0.5 mm Equipment and Automation Loading: automatic wood feed Unloading: automatic wood discharge Transport and clamping system: combined feed/clamping device with servo drive Feed systems: two independently operating feed systems (rollers + servo carriage) Control system: Single-Piece-Construction-Program (SPCP™) Compatibility: can be imported from CAD programs such as Robbins®, MiTek®, Alpine®, and KeyMark® Operation Required staff: just one person for loading and unloading User interface: simple and intuitive user guidance Processing Functions Milling, drilling, marking: fully automated Application: wall elements, timber framing, beams, I-joists Processing speed: extremely fast without setup time Horizontal drilling unit Types of drilling: through and blind holes Application: e.g. rafter drilling Grooving unit Use: through and blind grooves Chain widths: various chains can be used Nsdpowwqzasfx Ahvskw Example application: base for posts Material handling Material transport: even stacked workpieces can be safely transported and processed Material detection and positioning: automatic via feed/clamp system and servo carriage MACHINE DETAILS Footprint: 19.10 x 5.00 m Height: 2.43 m