Used CNC lathes 200-249mm turning diameter for sale (111)

Condition: good (used), Year of construction: 1996, Functionality: fully functional, CNC Lathe Manufacturer: HITACHI SEIKI Type: TF 20 Year 1996 Control: FANUC 21TB Chuck diameter: 210 mm Forkardt. Maximum turning diameter: 200 mm Forkardt Turning length: 250 mm Spindle speeds: 52-4500 rpm Spindle bore: 52 mm Tool turret with 8 positions Rapid traverse X and Z: 25 m/min Machine without tailstock. Machine can be demonstrated under power. In good condition, complete machine documentation is available. For further information, see data sheets. Cgslikov T Uf Astd Rot

Condition: used, CNC lathe Daewoo Lynx 200 B CNC Fanuc 21t 10 tool turret tailstock Celiktdjt Ip Uke Rsgt bar feeder The machine can be seen under power in our warehouse (M i m u)

Condition: like new (used), Technical details shown on pictures. Parts shown by hand not come. Cjliolqwrcektd Regt 3 jaws chucks not come with machine. With machine will come 9 live tool holders., Fixed tool holders not come.

Condition: used, Year of construction: 1991, Mazak SQT 10MS Lathe Technical Specifications: Working Area Max. Turning Diameter 230 mm Cslisv Tbu Dektd Rjgt Main Spindle Speed Range 35–6,000 rpm Main Drive Power 11 kW Secondary Spindle Drive Power 5.5 kW Speed Range 180–6,000 rpm Indexing 72 Positions/5° Tool Turret Number of Tool Positions 12 Live Tools Speed Range 120–3,000 rpm Drive Power 2.2 kW Travels X-Axis 160 mm Z-Axis 455 mm B-Axis 460 mm Travel Speed Feed Range X/Z-Axis 0–5,000 mm/min C-Axis 1–2,000 °/min Machine Specifications (with standard equipment) Total Power Consumption 43 kVA Machine Weight, . 3,500 kg Machine dimensions (L x W x H), approx. 2.70 x 1.70 x 1.85 m Accessories Tool presetter (MAZAK Tool Eye System) C-axis Dual foot switch for opening/closing the chuck Chuck status feedback (open/closed) Front door lock Complete coolant system Work area lighting Documentation

Condition: used, Year of construction: 1996, Functionality: fully functional, Colchester Tornado T-80 CNC lathe production lathe for production from bar up to fi 42mm equipment head 12xVDI30 Bar feeder MB1000 Collet chuck Cgjliktdewavu Ro Rot

Condition: used, Year of construction: 1989, Functionality: fully functional, Lathe Cycles Manufacturer: Weiler Type: UD 24 CNC Control: Siemens Sinumerik 810T Technical Specifications: Cgoliksv S Ht Notd Rst Spindle bore: 36 mm Bar bore: 24 mm Chuck: 110 mm Swing diameter: 190 mm Turning diameter: 80 mm Work spindle center above floor: 1070 mm Cross slide support - turning center: 45 mm Z-axis: 210 mm X-axis: 120 mm X-axis rapid traverse: 5,000 mm/min Z-axis rapid traverse: 10,000 mm/min Weight: 1,200 kg

Condition: new, The LabTurn is suitable for CNC training as well as for the production of small workpieces. The compact and mobile CNC lathe represents the full range of functions of a large production machine. The 8-station tool turret has four tools each for internal and external machining and long workpieces can be machined with a tailstock. The main spindle rotates continuously up to 3000 revolutions and the 3-jaw chuck has a diameter of 100 mm (3.9 in). With its simple, intuitive operator guidance, the Siemens 808 controller is the ideal introduction to CNC applications. Coliktdouy Iclj Rjgt

Condition: good (used), Year of construction: 2015, Functionality: fully functional, turning diameter over cross slide: 210 mm, turning length: 300 mm, turning diameter: 220 mm, spindle bore: 51 mm, spindle speed (max.): 6,300 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 310 mm, EMCO Emcoturn E 45 CNC Lathe Year of manufacture: 2015 Control: Sinumerik 828D Technical specifications: Main spindle speed: 10 - 6,300 rpm Drive power: 13 kW Spindle bore: 53 mm Bar capacity: 45 mm Travel ranges: X-axis: 160 mm Z-axis: 310 mm C-axis: 0.001° Turret: Number of stations: 12 Adapter: VDI 30 Accessories: Cgslsv Sm N Rjiktd Rot - Chip conveyor - Coolant system - Emco Compact Load short-bar loader

Condition: good (used), Machine come with equipement from pictures. Parts shown by hand not come. Cgolovx Tikeiktd Rot

Condition: ready for operation (used), Year of construction: 1989, Functionality: fully functional, machine/vehicle number: 120160, turning length: 925 mm, turning diameter: 480 mm, total height: 1,990 mm, total length: 3,350 mm, total width: 1,800 mm, power: 0.032 kW (0.04 HP), Equipment: documentation/manual, From trade-in from a long-standing existing customer Coliktdoqy Edge Rsgt

Condition: good (used), Year of construction: 1999, Functionality: fully functional, CNC lathe tornado A90 after renovation in 2024 tool head VDI30 equipment bar feeder collet chuck on E173 The machine is working can be seen in production Cjlikewavqxjtd Rogt

Condition: good (used), Year of construction: 2015, Functionality: fully functional, machine/vehicle number: 265864, turning diameter: 350 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 195 mm, travel distance Z-axis: 560 mm, spindle motor power: 15 W, feed rate X-axis: 30 m/min, feed rate Z-axis: 33 m/min, torque: 233 Nm, distance table center to spindle nose: 687 mm, Equipment: documentation/manual, Mazatrol Smart Control. Spindle speed 5000 rpm. X/Z travel 195mm/560mm. Fitted with 215mm diameter. 3 jaw-powered chuck 12-station turret. Tailstock. Tool setter. Cgsliktevfm H Aod Ret Part catcher.

Condition: used, Year of construction: 2015, turning diameter 210 mm turning length 1000 mm control Fanuc 31i main spindle: max. turning speeds 5.000 min/-1 drive capacity - main spindle 15 kW max. torque 476 Nm bar passage 65 mm travel: x-axis 250 mm z-axis 1050 mm x2-axis 150 mm z2-axis 1030 mm In our opinion, the machine is in very good used condition and can be inspected under power by appointment. Technical details: - approx. 500 spindle hours Accessories: - Steady rest - Chip conveyor Accessories, tools and clamping devices shown are only included in the scope of delivery Celievduabektd Rjgt if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: excellent (used), Year of construction: 2001, Functionality: fully functional, machine/vehicle number: W202309, • Number of spindles: 2 Cslikjv Uxwxstd Regt • Spindle speed range: up to 5000 rpm • Axis travel: • X-axis: 280 mm • Z-axis: 850 mm • Number of turrets: 16 • Machine weight: 6,500 kg

Condition: good (used), Year of construction: 2008, Machine is in good working condition. Celikju Rc Hmotd Rogt

Condition: excellent (used), Year of construction: 2005, Functionality: fully functional, turning length: 380 mm, spindle bore: 55 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 100 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 380 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, total height: 1,900 mm, total length: 3,500 mm, total width: 1,650 mm, quill diameter: 85 mm, quill stroke: 440 mm, overall weight: 3,300 kg, spindle nose: ASA 5", Equipment: documentation/manual, Year 2005, max. rotating diameter 400 mm, max. workable diameter from bar 45 mm, max. workable diameter from pick-up 220 mm, max. workable length 380 mm, spindle nose ASA 5”, spindle bore 55 mm, 3-jaw chuck Autoblok 210 BH, spindle rotation speed 100-5000 rpm, spindle motor power 11-15 kW, X-axis travel 160 mm, Z-axis travel 380 mm, B-axis travel 440 mm, X/Z-axis rapid traverse 20 m/min, B-axis rapid traverse 12 m/min, bidirectional turret, 12 positions, automatic tailstock, quill diameter 85 mm, CM 4 cone, dimensions 3500x1650 mm H=1900 mm, weight 3300 kg, carpet chip conveyor, n. 12 static tool holders, piece collecting hand. Cjliktdevw Agvj Rjgt

Condition: good (used), Year of construction: 2002, Colchester Tornado T310 lathe, spindle passage 82.5 mm. Equipment: tailstock, VDI 40 head, MB 1000 bar feeder. 3-jaw chuck, VDI 40 tool holder. The machine can be viewed under power at our plant in Poznań. Cgoliktjwavm Tod Ret

Condition: excellent (used), Year of construction: 2006, MAZAK QUICK TURN NEXUS 250M-Y Max. machining diameter: 380 mm Max. machining length: 500 mm Max. milling speed: 4,500 rpm Max. spindle speed: 4,000 rpm Max. bar diameter: 74 mm Machine is equipped with: - Mazatrol 640T Nexus CNC control - Kitagawa B-210 three-jaw chuck, 254 mm diameter - Tool Eye - C-axis - Y-axis - Bar feeder interface - Automatic parts catcher - NC tailstock - Reinforced coolant pump - MAYFRAN chip conveyor - 10 stationary tool holders - 2 driven tool holders Cgslov N Et Ajiktd Rot - IRCO short bar feeder

Condition: good (used), Parts shown by hand not come. Coliot Hwimoktd Rsgt Machine is without Y axis. Live tools are on both turret.

Condition: good (used), Year of construction: 2006, Functionality: fully functional, CNC lathe with Y axis, tailstock. equipment scraper chip conveyor, coolant paper filter, bar feeder, bar holder with 6-65 mm clamping sleeves. Round and hexagonal sleeves, Sauter VDI 30 tool head, 2x straight and 2x angular driven holders. for ER25 Cjliktjwavk Ssd Regt

Condition: good (used), Year of construction: 1997, Parts shown by hand not come. Cutting tools and inserts not come. Cgeleuml N Uoiktd Rot Only tool holder come with machine.

Condition: good (used), Year of construction: 2006, Functionality: fully functional, Colchester Tornado T10 CNC lathe with bar feeder chip conveyor. The machine can be seen working connected in the production of parts. Equipment 3-jaw chuck tool holders, Coliktdowavk Ee Rsgt

Condition: good (used), Year of construction: 1998, Baujahr 1998 Spindelstunden 52’000h Stangendurchlass 40mm Fanuc Series 18i-T Späneförderer Toolsetter integriert 12Stationen Cjliktdotth Hgs Rogt 1Spindel, X und Z Achse Kurzstangenlader Spannzangenfutter F48

Condition: good (used), Year of construction: 2001, Machine is in good condition. Parts shown by hand not come. Cgeliktsrpk Rmod Rjt Cutting tools not come.

Condition: good (used), Year of construction: 2008, Parts shown by hand not come. Cslieu Rdkmoktd Rogt