Condition: used, machine/vehicle number: 008370, X axis working area: 5055 mm Y axis working area: 1930 mm Isdpfx Asx A Tk Sjqueau Working Table: Pod and Rail Main Electrospindle power: 19 KW Number of controlled axes: 5 axes Maximum edge height: 60 mm Total number of drilling spindles: 28 Total number of tool changer positions: 31

Condition: used, Year of construction: 2025, functionality: unexamined, Homag Centateq P110 PROFI BMG110/3115/F/K CNC machining centre (2025) with  Almig Combi XP15 receiver mounted air compressor (2025) Air Plants Dust Extraction Ltd dust extraction system (2025) Isdozc Rzpopfx Aqujau

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, Numerically controlled machining centres WINLINE WINLINE is a modern and innovative machining centre dedicated to the production of wooden windows and doors components. WINLINE is performing the entire working cycles including the load /unload and the positioning of the parts for each needed operation, under the direct control of the NC. This new level of integrated automation can afford the highest level of precision. The machine is a real “one-man factory”: controlled by a single operator, performs the complete process on each component without the need of second passes, from squared planed all round parts to finished parts ready for assembly and painting process. It also gives the operator time to perform any further processing regarding the construction of a window: molding, sizing, assembly of the elements at the clamping machine, assembly of the hardware, assembly of the glass etc. WINLINE can produce any kind of window component, with any type of jointing (negative profile and dowels, mechanical fixing, open tenons, closed tenons...). The machine can perform the highest achievable level of productivity in each single case. Locking devices are engineered to ensure pieces stability and the highest level of precision, top constant quality surface in each operation and eliminates all kinds of marks and friction abrasions on finished parts, that in traditional systems may be caused by friction and sliding of the pieces on the handling device. WINLINE operating groups are engineered for heavy duty operations with high reliability. The machine can totally integrate with any cad/cam system allowing a direct transfer “from the project directly to the execution and production”. The base machine includes: Mobile gantry structure and double Y axis with independent carriages Pieces manipulator: loading, unloading and clamp exchange Automatic lubrication system Multizone system Automatic movement of panel supports Iaodjwnx Agspfx Aqusu Belt conveyor for chips and off-cuts removal Numerical control Personal computer desktop with 3D video card and LCD Electrical equipment conditioned air Documentation Maintenance equipment Remote keyboard Industry 4.0 - Integration with factory systems

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, Equipment: CE marking, IMA BIMA 410 V CNC WORKING CENTRE FOR BORING + ROUTING + EDGE BANDING • Industrial machine with heavy-duty structure • Working area: X:4000 mm Y:1200 mm Z: 100 mm • Travel speed: X:100 m/min Y:80 m/min Z: 25 m/min • 2 Working areas • 8 movable work tables to support the panels. SCHMALZ system • 23 SCHMALZ suction cups with vacuum system for the locking of the working piece • 4 loading device through pneumatic bars assembled on the work tables that lift the pieces • 1 SIEMENS vacuum pump ROUTING UNIT: Iajdpjzc E A Iofx Aqusu • 10 HP. Refrigerated router head • Automatic change of the tool • Tool holders: HSK F-63 • C AXIS that allows to turn and 360° angle drive heads with rotation regulation in automatic by numerical control • 0 to 20.000 rpm • Tool magazine 12 positions MULTI-BORING UNIT: • 7 independent spindles for vertical boring in X direction • 5 independent spindles for vertical boring in Y direction • High revolution speed: 9.000 rpm EDGE BANDING UNIT: • Automatic device to apply the edge into straight profiles of shaped panels • Applicable banding material in coils: thin edge and PVC up to 3 mm • Independent unit to edge band shaped panels. It's installed on the main frame of the machine - hot-melt glue pot and premelter - spreading roller to regulate the quantity of apllied glue - edge pression roller • Lamp zone to pre-heat the side of the panel • Multiple magazine for edge coils with 2 positions, to automatically change the edge type • Top and bottom edge trimming head-unit • Top and bottom edge scraping head-unit CONTROL OF THE MACHINE: • IMATRONIC • Software IMAWOP • Command board installed on a separated electrical cabinet to control the machine PROTECTION ENCLOSURE OF THE WORKING UNITS PROTECTION FENCES SECURITY CARPETS SECURITY NORME CE MARK

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, For sale is a used WEEKE Venture 2M CNC machine from the HOMAG Group. Year of manufacture: 2008 Max. milling area according to the brochure: 3595 x 1400 mm Swivel table for multi-part machining Laser positioning for vacuum cups Drilling head with nut saw Torque arm for mounting machining heads (Sold without tools & machining head; these remain with the customer) Tool slots: 8 Windows XP / WoodWOP5.0 Still in production use. Available from July 2026 In good condition. Please feel free to contact us if you have any questions. Iajdpfx Aqjzc Dvgoueu

Condition: good (used), Year of construction: 2013, functionality: fully functional, For sale is a used WEEKE BMG 111 / Venture 108M CNC machine from the HOMAG Group. Year of manufacture: 2013 Max. processing size: 3130 x 1550 mm Swivel processing possible Laser positioning for vacuum cups Drilling head with nut saw C-axis Tool positions: 8 + 8 Iajdpfxjzc Du Aj Aquou WoodWOP 6.1 The machine is sold without tools and without attachments; these will remain with the customer for the new machine. Currently still in production. Available from mid-July 2026. In good condition. Please feel free to contact us if you have any questions.

Condition: used, Year of construction: 2005, Processing size: 3000 x 1600 x 180 mm High-pressure pump 60 HP / 45 kW Model E-60 Operating pressure 4,130 BAR Water consumption 4.69 liters/min. Software: Watercad-CAM Automatic cutting optimization Storage location: customer Isdpsxgfbqsfx Aqujau

Condition: used, machine/vehicle number: 008205, X axis working area: 4250 mm Y axis working area: 1320 mm Iaodpfx Ajx A Th Rsqusu Working Table: Pod and Rail Main Electrospindle power: 11 KW Number of controlled axes: 4 axes Total number of drilling spindles: 31 Total number of tool changer positions: 22

Condition: used, machine/vehicle number: 008198, X axis working area: 4200 mm Y axis working area: 1400 mm Working Table: Pod and Rail Main Electrospindle power: 18.5 KW Number of controlled axes: 4 axes Ijdpjx A Hbkofx Aqujau Maximum edge height: 60 mm Total number of drilling spindles: 35 Total number of tool changer positions: 26

Condition: used, machine/vehicle number: 008170, X axis working area: 4300 mm Y axis working area: 2250 mm Isdsx A Tcujpfx Aqusau Working Table: Flat table Main Electrospindle power: 9 KW Number of controlled axes: 4 axes Total number of drilling spindles: 12 Total number of tool changer positions: 14

Condition: used, Year of construction: 2000, machine/vehicle number: AA1/11510, functionality: fully functional, operating hours: 19,250 h, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, travel distance X-axis: 3,080 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 280 mm, workpiece length (max.): 3,080 mm, workpiece width (max.): 1,200 mm, number of axes: 3, number of slots in tool magazine: 12, total height: 2,346 mm, overall weight: 4,000 kg, Equipment: CE marking, documentation/manual, We are offering this used SCM Record 130 machining center, year of manufacture 2000. Equipped with a more powerful vacuum pump (2050 m³/h), vector rotary axis, angle gearbox adjustable from 0 to 100 degrees (HSK63), drilling unit with 9 spindles, and low operating hours. If you have any questions or require further information, please feel free to send us a message or call us. Iaedpfsyzadrex Aquou

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, MACHINING CAPABILITIES: - Height (thickness) of useful Z-axis travel: 225 mm - Length of useful X-axis milling travel: 3860 mm - Width of useful Y-axis milling travel: 1930 mm Ijdpfszcvvrsx Aqujau - Work area: X = 3090 mm Y = 1530 mm Z = 85 mm, depending on the clamping system, see machine technical diagrams. - Maximum travel speeds: X-axis: 25 m/min Y-axis: 25 m/min Z-axis: 15 m/min MACHINE COMPOSITION: - Vacuum table with grooved length x width: mm Grid pattern with 30 x 30 mm grid spacing Matrix table with fine grid, axis dimensions 30x30 mm (instead of 60x60 mm grid) - 2 Vacuum pumps 250 m3/h - Chip evacuation mat - X-axis movement via pinion and rack, Y & Z-axis movements via screw and sleeves (high-quality precision linear guides with automatic lubrication) • Milling/routing unit 10 kW - Tool holder connection type: HSK F63 - Variable speed 1000–24,000 RPM, controlled by a frequency converter Rotation direction: right/left The routing spindle is connected to the Z-axis mounting plate via linear guides and moves along 2 vertical linear guides. The tool clamping is done using an HSK F63 cone. Tool retention is controlled by 3 sensors. This ensures safe operation. The tool clamping cleaning is pneumatic. Drive: HF 3-phase motor controlled by a frequency converter Bearing: ceramic Spindle cooling: by air - Extraction hood around the perimeter - On-board tool magazine, 11 positions - Maximum tool diameter: 100 mm - Maximum tool height: 153 mm - Distance between clamping jaws: 110 mm Please consult the machine configuration for more information on specifications. • DH 16 4H 2S Drilling unit: Unit with 12 vertical heads and 4 horizontal heads; 2 slotting saws; 1 in the X direction and 1 in the Y direction Vertical drilling system with 12 spindles. 7 spindles in the X direction and 5 spindles in the Y direction. Independent operation of each spindle is possible. Continuous speed up to 6000 RPM, horizontal drilling system with 4 spindles. 1 double spindle in the X direction, 1 double spindle in the Y direction. • Control panel: - Windows PC - Programs (Software): F4 Design, F4 Nest OTHER FEATURES: - Total electrical supply: 400V. 3Ph.+N+T 50Hz IN 56-63 A - Installed power: 26kW - Pneumatic supply: 8 Bars - Average consumption: 350 Nl/min - Centralized extraction ports - CE standard marking Lockable disconnector switch, emergency stops

Condition: new, Year of construction: 2024, axis 920 mm x-axis 3000 mm material thickness Z 12 mm - 30 mm feed speed 20 m/min. A - axis 360 degrees Minimum dimension: Iaodpfxscnz H He Aquou plate: x = 300 mm Y = 120 mm z = 12 mm The machine is equipped with a 4 position drill chuck and a saw blade. Maximum and minimum hole diameters that can be drilled: 3 - 35 mm The saw blade runs in X - direction Max. depth Depth with saw blade: 10 mm Motor 0,75 PS , 400 Volt Required suction capacity: 2300 m3/h Location: Ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2014, Axle 920 mm x-axis 3000 mm Material thickness Z 12 mm - 30 mm Feed speed 20 m/min. A - axis 360 degrees Minimum dimension: Plate: x = 300 mm Y = 120 mm z = 12 mm The machine is equipped with a 4 position drill chuck and a saw blade. Maximum and minimum hole diameters that can be drilled: 3 - 35 mm The saw blade runs in X - direction Max. bottom depth with saw blade: 10 mm Motor 0,75 PS , 400 Volt Iaodpfx Aqjfmdcqeusu Required extraction capacity: 2300 m3/h Location: comes to warehouse 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2024, Axolox 3021 CNC wood router - display machine available immediately - Iasdewdny Tjpfx Aqusu in 19mm Forescolor, consisting of a router table (X-axis), gantry (Y-axis), Z-axis unit made of compact board, and a base frame, with adjustable machine feet. Router bed as a sacrificial board made of 19mm MDF. Table openings pre-prepared lengthwise and crosswise. Mechanical set consisting of profile guides including profile guide carriages, recirculating ball screws, and precision racks. All elements assembled, pre-lubricated, including a test run, and immediately ready for operation. The control set consists of control cables, energy chains, planetary gears, stepper motors, high-performance power amplifiers, power supply, and toroidal transformer, fully pre-assembled in the control cabinet, as well as sensors for each axis. Switching relays for automatic control of the existing extraction system. Brush seals for dust protection, as well as CE-compliant safety devices with a mobile extraction system and a laser scanner mounted on one side for monitoring the work area, with a 275° and 5.5 m field range (positioning the machine in a corner of the room). A handheld control unit is equipped with all the necessary functions for operating the machine, including an emergency stop button and a deadman's switch. A tool length sensor is used to determine the tool length and change the active zero offset. A 2.2 kW high-frequency spindle includes a union nut, frequency converter, line filter, brake resistor, and collet set. A built-in monitor includes a mini PC with Windows 10 and Beamicon2 control software, as well as a mouse and keyboard, pre-installed in an ergonomic desk. A Rhino 7.0 CAD license and an Estlcam V11 CAM license, as well as all necessary documentation, will be sent by email prior to delivery. - Milling bed designed as a vacuum table consisting of six adjustable sub-elements. Cross table made of PE with an MDF cover plate. Vacuum pump from Becker with an output of 160 m³/h, with an oil-driven rotor. A 16 amp, 400 V AC plug is required for the vacuum pump's power connection. The customer must provide 3 mm HDF raw on both sides for the entire vacuum table (3000 x 2100 mm) as a sacrificial plate. (Recommended use: machining coated chipboard) - Tool set: 10 pieces 2 x 5 mm TAC double-flute cutters 8 x 4 mm solid carbide single-flute cutters - Maintenance package: Including a 150 ml grease gun, a 400 g cartridge of high-performance grease, a 500 ml can of silicone spray grease, and a grease nipple - Clamping device as an attachment for the existing high-frequency spindle. Suitable for slightly curved and particularly thin materials. Location: From stock, 54634 Bitburg - Available immediately - Subject to prior sale

Condition: as good as new (ex-display), Year of construction: 2026, CNC Machining Centers Rover Multi Up M C S Working Area*: X = 3280 mm; Y = from 1580 to 1660 mm, depending on work conditions Z = 200 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 74 mm Z = 245 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 29 mm Workpiece Clearance*: Y = 1900 mm Axis Travel*: X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm VACUUM SYSTEM Subdivision of the vacuum system into 2 working zones and 2 clamping zones in X. AUXILIARY VACUUM SYSTEM – 2 zones Allows clamping of workpieces using vacuum templates. Remote Control RM850 Rover Multi Up M C S Panel – Multi Purpose Regular Configuration 2 Compatible with the turret tool magazine with 16 positions and the side tool magazine with 12 positions. The tool magazines can also be retrofitted. Uninterruptible Power Supply (UPS) for machine PC. 6 ATS workpiece supports – 18 module carriers — 6 aluminium workpiece supports. The positioning of the workpiece supports is via linear guides with ball bearing slider blocks. Clamping is performed on the front and rear linear guides via pneumatic cylinders. Clamping is released by a push button located at the front of the workpiece support. — 18 module carriers, 132 x 132 x H 41.5 mm, with independent pneumatic clamping. The vacuum modules can be rotated in 15° increments on the module carriers; an ideal solution for shaped parts. — 18 covers for module carriers without template. SA (Set-Up Assistant) working table for tables up to 1550 mm. Supported manual positioning system with motion direction indicator and position indicator. — Sensors on each working table and along the X-axis of the working area. — Display of direction and position achieved for the carriage during positioning phase, mounted on each working table. According to the programmed configuration of the working tables, the system indicates the direction of movement for each working table and carriage, and confirms with a green LED and audible signal when the correct position is reached, with a tolerance of +/- 1.5 mm. Subdivision of the pneumatic system into 2 working areas in X. Machining unit with 5 interpolating axes, 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled – 20,000 rpm Extraction hood with 12 NC-controlled positions for the 5-axis electrospindle. Flange for preparation of a 5-axis interpolating machining unit for mounting aggregates. Coolant system Additional Z-axis carrier for rear machining units, with independent Z-axis. Drilling head BH 24 L Side tool magazine with 12 positions, integrated into the machine bed. Turret tool magazine with 16 positions, installed directly on the X machining unit. HSK F63 tool adapter, equipped with a long integrated flange, for saw blades on the 5-axis head. Saw blade 300 mm, for tool holder. Hi-Tech tool set Complete set of tools for the acceptance test Consisting of the following 9 parts Replacement of standard PC with a high-performance PC. Digital device for measuring tool length up to 130 mm diameter. bSolid NC-HOPS 8 MacroCAM Rover 1. AV NC-HOPS MacroCAM 1. License WorkCenter suction cup proposal 5-Axis Simultaneous Material removal simulation Iedpfxjy Ehrxo Aquoau 12-month warranty period Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2017, machine/vehicle number: 1000025340, functionality: fully functional, travel distance X-axis: 6,735 mm, travel distance Y-axis: 1,650 mm, travel distance Z-axis: 245,290 mm, workpiece height (max.): 60 mm, controller manufacturer: Biesse BH 660, bSolid, bEdge, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 85 m/min, rapid traverse Y-axis: 85 m/min, Assembly of the the machine could be done by our subcontractor on the agreed price. Isdpfx Aqsycvcxeueau

Condition: used, Year of construction: 2022, machine/vehicle number: 1371, functionality: unexamined, power: 10.3 kW (14.00 HP), travel distance X-axis: 3,200 mm, travel distance Y-axis: 920 mm, workpiece weight (max.): 75 kg, total height: 2,500 mm, total length: 3,800 mm, total width: 1,800 mm, overall weight: 2,000 kg, Vertical machining center, with Campus V7-EVO software, Campus Standard macro package, handheld control unit (for remote control of the machine), 21.5" flat screen monitor, keyboard with cable, 2D barcode scanner, laser workpiece length measurement, milling head 7830 with 6-position magazine (max. tool diameter 110mm), XL drilling head 1.7 kW (19 spindles), bevel gear unit 7869, workpiece support with infeed table, ECO vacuum system, automatic central lubrication, air conditioning unit for switch cabinet cooling. Isdozcm Ekspfx Aqusau Please refer to the attached appraisal for details on the condition of the unit.

Condition: not inspected (used), Year of construction: 2020, max. workpiece length 3740 mm profile spindle 1 Stück main drive 15 kW Control CNC Felder Format4 Type Profit H500S 16.38 CNC Machining Center to be sold on behalf of our customer ----- - From a wood window manufacturing company. - Machine still connected and ready for demonstration - Without machining tools Technical description (summary, full text see PDF): ----- Working dimensions: X = 3,740 mm Y = 1,570 mm Z = 350 mm clearance height (from console level), depending on clamping system, see layout. Travel: X = 4,930 mm Y = 1,925 mm Z = 500 mm Axis positioning speed: X = 80 m/min Y = 80 m/min Z1 = 30 m/min Z2 = 20 m/min - 5-axis milling spindle: 15 kW HSK F63 with liquid cooling, 1,000 - 24,000 rpm - Additional C-axis locking - Drilling head DH 18 6H1S: Vertical drilling unit with 12 spindles (7 spindles in the X direction, 5 spindles in the Y direction, grooving saw in the X direction) Horizontal drilling unit with 6 spindles, 4 spindles in the X direction and 2 spindles in the Y direction. Iaodpfx Aeyq Sztequsu 1 groove saw in the X direction, max. diameter 120 mm - Tool changer with 24 tool positions on the right side of the machine stand max. workpiece diameter 240 mm max. tool height 370 mm - Tool changer for circular saw blade mounted on the boom/tool changer max. saw blade diameter 350 mm - Tool changer on the left side of the machine stand with 10 tool positions. Max. workpiece diameter 180 mm Max. tool length 230/300 mm Collet spacing 110 mm - 24-position tool changer mounted on the boom, moving in the X-direction Max. workpiece diameter 240 mm Max. tool height 370 mm - Moving pick-up area for chip deflector plate - 6 workpiece supports with s-motion position control - 2 machining areas for pendulum machining - Vacuum pump 90 m³/h - Chip conveyor belt - Line laser for curved machining - Includes all existing solid wood clamps and vacuum suction cups - Automatic central lubrication - CE safety device - "WoodFLash" software Lamello Clamex P Macro Notching Macro software - "Greenline package" for reduced energy consumption ----- Price of the above machine on Inquiry! ----- NOTE VIDEO: Not an original video. The video is from the machine manufacturer and shows a machine of this type. (Technical specifications according to the manufacturer - without guarantee!) All prices quoted are net, plus VAT.

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 132, functionality: fully functional, travel distance X-axis: 3,400 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,100 mm, number of axes: 5, Equipment: CE marking, SECOND-HAND 5-AXIS CNC WORKING CENTER BACCI MOD. TWIN - Strokes: X = 3400 Y = 1500 Z = 1100 B = endless C = 400° - Type 4 head 7.5 kw - 0-24.000 rpm - N. 2 tgv working tables - OSAI control - Enclosed cabin on 4 sides + roof - No. 2 Becker vacuum pumps 100 m³/h - Serial no. 132 - Year 2001 (CE rules) Iajdpfx Aozclg Hequju

Condition: excellent (used), 5-axis Year of production: 2018 Machine working area dimensions for the X and Y axes: X 2100 mm Y 3100 mm Head stroke in the Z axis: 1250 mm Machine travel speed X, Y. Z: X: 80 m/min Y: 80 m/min Z: 12 m/min Vacuum table BECKER pump HITECO spindle in the HSK 63F standard Price of a new machine: approx. 135.000 € Isdpfx Ajun Rqgoqueau

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, For sale: Biesse Rover 3.03 CNC machining center The machine is currently in operation and can be inspected and tested while powered on, by prior arrangement. The Biesse Rover series is known for its robust construction, high reliability, and versatile applications in wood and panel processing. It is ideally suited for carpentry shops, interior fitters, furniture manufacturers, and industrial production companies. Technical data: Iedpfxoza Edto Aqueau Control system: CNC XP 600 Travel range, X-axis: 3,060 mm Travel range, Y-axis: 1,260 mm Travel range, Z-axis: 150 mm Machine length: 4,400 mm Machine width: 2,800 mm Machine height: 2,400 mm Weight: approx. 3,130 kg

Condition: like new (used), Year of construction: 2023, SCM Accord 40 fx CNC machining center with the following equipment: Iaedpfxeyfgzdj Aqusu Working area X-Y = 6360 x 1905 mm, Z = 350 mm OF0158 Usable Z clearance height = 350 mm with H50 suction cups OF0165 Axis travel speed of Accord 40 fx Version PRO-SPEED OF0168 Pendulum (dual-zone) operation OF0169 Automatic axis lubrication OF0299 TELESOLVE remote maintenance via Internet 450328 eye-M PRO control console with integrated PC 450291 Additional fixed control panel 870068 TECPAD – remote control of machine functions 560058 No. 10 carrier rails MATIC – L1825 230429 MAXI working unit – Prisma KT 1 870046 Prepared for angle gearbox "Prisma KT-KS" 470014 Air nozzle for tool 870119 Device for tool length measurement 870120 Device for panel thickness measurement 870009 Drilling unit F16 OF0176 Front stop row H50 for worktable with 10 carrier rails 510205 Preparation for clamps for worktable with 10 carrier rails 480178 Front stop row H110 for worktable with 10 carrier rails 480105 Rear stop row H110 for worktable with 10 carrier rails 480137 First lateral stop row H110 for worktable with 10 carrier rails 480005 Suction cups H110, 145x145 mm, 36 pcs 480006 Suction cups H110, 145x55 mm, rotatable, 10 pcs 480007 Suction cups H110, 180x65 mm, rotatable, 10 pcs 480018 Suction cups H110, 145x30 mm, rotatable, 5 pcs 480410 Lifting devices H110, 8 pcs 350016 Vacuum pump 250 (300) m³/h 560538 Additional automatically adjustable base for MATIC 10 carrier rail 190046 PRO-SPEED safety system 524800 "SAV€NERGY" 2.0 energy saving system 210837 TR12 – lateral tool magazine 210056 Rapid 24 – rear tool magazine OF0182 Air conditioning for control cabinet OF0438 Human-machine interface software (HMI) MAESTRO ACTIVE OF0543 Operating system Windows 10 embedded 64 bit OF0422 Machine operating interface software Maestro cnc OF0435 Hardware dongle for Maestro cnc 524309 Maestro 3D-Advanced module 109993 MACHINE LANGUAGE: German SPECIAL FEATURES INCLUDED IN MACHINE CONFIGURATION: - Extension of maximum panel width to 2,120 mm for full processing; traverse length remains unchanged at 1900 mm. - 10 support suction cups for remnants MACHINE ALREADY DISMANTLED AND STORED. LIST PRICE 2023 EUR 399,890.--

Condition: used, Year of construction: 2007, total height: 2,500 mm, total length: 11,000 mm, total width: 2,400 mm, Colour: Grey Empty weight: 7.200 kg Price: On request - Machine available from: 2026-06-24 - Year: 2007 - Documentation available: Yes - └ Type Documentation: Technical data, Electrical diagrams, User manual, Assembly manual - └ Language: NL - └ Type: Hardcopy - CE marking present: Yes - CE certificate present: No - Serial number: 97649 - Number of milling spindles [pcs.]: 2 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - - Min. spindle speed [rpm]: 1000 - - Max. spindle speed [rpm]: 20000 - - Main motor power [kW]: 9 - └ Milling spindle 2: - - Number of controlled axes [pcs.]: 3 - - Main motor power [kW]: 18.5 - Type milling table: Beam table - Tool clamping system: HSK-F63 - Material clamp system: Pneumatic - Drilling unit present: No - Tool changer positions [pcs.]: 22 - System/software: BiesseWorks - Safety feature: Safety mat - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: VTLF 250 - └ Year of manufacture: 2007 - └ Main motor power [kW]: 5.5 - └ Capacity [m³/h]: 250 - Tools included: No - CNC options: EPS system, Offcut conveyor, Manual control - CNC documentation available: USB stick, User keys/licenses - Table length [mm]: 6200 - Table width [mm]: 1320 - Working range X [mm]: 6200 - Working range Y [mm]: 1535 - Z-axis working range [mm]: 275 - X-axis maximum stroke [mm]: 6820 - Y-axis maximum stroke [mm]: 1963 - Transport dimensions: 11000mm x 2400mm x 2500mm (l x w x h) - Transport weight [kg]: 7200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Iajdpey Ipntsfx Aquou Glenn Smeets

Condition: used, Year of construction: 2011, AXES Working Range X-Y-Z Axes * mm 3050-1300-180 Workpiece length for pendulum operation mm 1390 Stroke X-Y-Z Axes mm 3460-1735-250 Max. traverse speed of X-Y axes m/min 60 WORK TABLE Number of workpiece supports and vacuum cups 6 / 2 standard type Standard end stops / position 1 / rear Vacuum pump m3/h 90/108 DRILLING UNIT Vertical spindles std/quantity/speed 1/min 12 (8X-5Y) / 4000 Horizontal spindles std/quantity/speed 1/min 6 (4X-2Y) / 4000 Integrated grooving / saw unit in X Ømm/1/min 120 / 6000 Motor power kW (HP) 2.2(3) ELECTROSPINDLE Motor power std./opt. (S6) kW (HP) 7.5(10) / 11(15) Max. speed 1/min 24000 Tool changer traveling with unit carrier in X 4 places, pneumatic INSTALLATION Installed power KVA 23÷28.5 Compressed air requirement Nl/min 450 Extraction air requirement m3/h 1900+1900 (3400) Required extraction air velocity m/sec 30 Extraction connection diameter mm 150+150 (200) Machine weight Kg 3000 * X: distance between stops; Y: milling center as reference point; Z: workpiece passage GENERAL FEATURES CNC-controlled drilling and milling center, C-frame design, and worktable with adjustable workpiece supports and vacuum suction cups, for: - Vertical drilling on the panel surface - Horizontal drilling on all four workpiece sides - Groove milling with disc cutter in the “X” direction - General milling work Self-supporting structure and work table Iodpeyymz Uofx Aquoau Structure made from welded steel construction with control cabinet integrated into the machine frame. Available in two different lengths and with standard workpiece supports or TV carrier options. Box construction made from cold-rolled steel with internal stiffening ribs and protective devices comprising a drilling head with vertical spindles, horizontal spindles, an integrated grooving and saw unit, and an SCM electrospindle with HSK 63 F quick-change tool system. Movement paths of the portal and unit carrier Movement in the X, Y, and Z axes is via linear prismatic guideways with preloaded ball bearings. The X-axis movement (moving gantry) uses a preloaded, backlash-free rack-and-pinion drive with helical gearing. Movement of the unit carrier in Y and Z directions is also preloaded for precision. Positioning of the working units and machine function control is through "brushless" AC servo motors and digital drives. CNC CONTROL The control unit comprises a numerical control for the milling and drilling machines and a PC with a graphical user interface "XILOG PLUS". PC office operating system Windows XP - 17" LCD color screen - QWERTY keyboard - Swiveling control panel - Machine interface: Xilog Plus software Xilog Plus Features Programming - Parametric, graphical, and ISO programming - Import of DXF and ASCII files - Linear or circular interpolation on three axes, spatially linear, spirally on selected plane - Supported programming with graphical and syntax assistance for drilling and milling operations - Automatic optimization of drilling operations and tool change cycles - Possibility to shift panel zero point for drilling on slanted or curved panel sides - Full compatibility with CAD/CAM Routocam (SCM) – AlphaCam Integrated additional functions - Calculator for direct transfer of computed data - S