Used Wood Mortising Machine for sale (65,253)

Condition: good (used), Year of construction: 1992, Single-piece sanding machine sanding from top and bottom electric height adjustment with digital display continuously variable feed speed star/delta starter pneumatic belt tensioning main switch sanding belt oscillation finishing brush unit top and bottom, manual height adjustment Working width: 190 mm Working height: 4 - 150 mm Min. workpiece length: approx. 280 mm Abrasive belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Incl. infeed and outfeed roller conveyor (L = 1600 mm, non-driven) Note on used machines: Nedjwyda Ujpfx Ahvjcn • Technical data subject to errors and prior sale. • Quoted prices are ex-works – loaded free of charge! • The machines have been cleaned and function-tested. • All machines are sold as inspected, with no claims to warranty. Buyers are welcome to inspect machines at the location. • Special agreements are only valid in written form. (We answer inquiries only when your address and telephone number are provided!)

Condition: excellent (used), Catalogue number 7321 TECHNICAL DATA - Max workpiece height: 90 mm - Max workpiece width: 130 mm From above: - Sliding belt - Sanding units – 2 brushes - Brush motors: 2 × 0.55 kW - Manually adjustable brushes (up/down) From below: - Feed belt - Sanding units – 2 brushes - Brush motors: 2 × 0.55 kW - Manually adjustable brushes (up/down) From the side: Ncodpfx Ahoymm Nkoven - Sanding units – 2 brushes - Brush motors: 2 × 0.55 kW - Manually adjustable brushes (up/down, front/back + angle) - Brush diameter: 220 mm - Stepless speed adjustment of sanding units via inverter - Stepless feed belt speed adjustment - Feed motor: 0.55 kW - Pull-out support table - Extraction port diameter: 3 × 120 mm - Overall dimensions (L/W/H): 2200 × 1200 × 1400 mm - Weight: 672 kg ADVANTAGES – Italian-made – 6 sanding units – Used sander – In very good condition Net price: 22,900 PLN Net price: 5,450 EUR (based on exchange rate of 4.2 EUR) (Prices may vary according to larger exchange rate fluctuations)

Condition: used, Year of construction: 1973, Storage location: Nattheim Ncedsvvkt Uspfx Ahvsn

Condition: excellent (used), Bargain from liquidation: Krüsi ZA 66, swivelling and mobile Ncsdpfx Ahjylpv Djvjn

Condition: used, Year of construction: 1988, - Grinding width: 190 mm - Grinding height: 4 - 150 mm - 2 grinding units - Belt speed: 25 m/s - Feed speed: 5 - 25 m/min Njdpfx Asymnz Uohvocn - Sanding belts: 1850 x 200 mm - Electrical connection: 400 V, 3/N, 50 Hz - Ex stock

Condition: reconditioned (used), Year of construction: 1960, functionality: fully functional, workpiece weight (max.): 1,800 kg, type of input current: three-phase, total width: 2,000 mm, table width: 700 mm, space requirement length: 2,000 mm, space requirement height: 2,300 mm, GSP slotting machine for straight and tapered keyways. 320 mm stroke. Centralized lubrication. Lighting. Circular table. Nedpjyl Rprofx Ahvocn

Condition: new, Year of construction: 2026, C6090 milling plotters are professional precision devices designed for small-sized processing of materials such as: wooden materials, chipboard, plywood, MDF, OSB, or PVC plastics, plexiglass, dibond, light metals. Training at CORMAK headquarters included in the price for each machine. Optional - the latest UCanCAM V13 software in Polish language version Drive Motors used to drive high-power machine tools provide appropriate acceleration and speed in individual directions. In the X and Y axes, high-quality toothed bars work, praised by users, which ensure high durability and precision, The Z axis is driven by a high-quality ball screw. All axes move on rail guides. The machine is equipped with a drive height sensor Spindle Brushless high-class spindle, which is characterized by durability. Liquid cooling system The spindle design uses high-quality machine bearings, characterized by very quiet operation and ensuring increased durability. Tool height measurement sensor - included. The spindle speed range is from 6000 to 24000 rpm. Software OPTIONALLY The latest UCanCAM V13 software in the Polish language version (the software provides the ability to import files from Corel, Autocad, etc. File import/export, text editor and input and many other functions) The software allows for quick and easy design of elements, which the program then converts to the so-called G-code. It is also possible to import ready-made files from other programs. The machine is equipped with a function of remembering the last G-code path (In the event of a power failure or interruption, it starts working from the last point without losing time or material.) DSP control Digital Signal Processing The DSP controller of the machine has its own processor and RAM, which ensures trouble-free operation and simple operation of the machine. The controller ensures smooth operation of the device and accuracy during processing. After a power loss, there is no need to initialize the program from scratch. The memory built into the controller allows the machine to work without having to load the program every time. Technical parameters Spindle 2.2kW / 3.0kW / s1 / s6 24000 rpm. inverter Njdewcd Tmopfx Ahvscn Workspace 600x900x300 mm DSP control Program resolution 0.001 mm Power supply 230V Weight 310 kg Machine dimensions width 1370x length 1720x height 2050 mm Table height 750 mm Linear guides Drive transmission toothed rack (Z axis - ball screw) Axis drives stepper motors UCanCAM V13 software in Polish language version (option) Equipment leveling feet, screws, keys, training cutter package, ER32 collets - 1/8 inch, 1/2 inch, and 5-6 mm Unloading and machine location on the customer's side. Power plug on the customer's side due to different sockets 16A / 32A Price is only for machine itself

Condition: reconditioned (used), Mortising machine, swing chisel mortising machine MAKA type DB 5 with many mortising tools, see pictures Workpiece stop 2 pieces Stop rail right / left 2150 mm Workpiece blow-out 2x Foot switch Pneumatic workpiece clamping on the side 1 piece Pneumatic workpiece clamping from above 2 pieces Extraction connection D 120 mm Weight approx. 550 kg Dimensions approx. L x W x H = 1200 mm x 800 mm x 1500 mm (without stop rails) Note on used machines: • Errors in technical information and prior sale reserved. Ncedjv Hm Nmopfx Ahven • Prices stated are pick-up prices from location - free loading! • The machines have been cleaned and function-tested. • All machines are purchased as seen without any claim to warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only answer inquiries if you provide your address + telephone number!)

Condition: excellent (used), GSP M 743 mortising machine Stroke (mm): X450 Y500 Slide travel (mm): 300 Max. table tool distance (mm): 450 Gooseneck (mm) : 590 Slot width 25 30 mn Table diameter (mm): 700 Feed speed (mm/mm): 0.1-2.5mm/Cp Main motor power (HP): 6 Ncsdpjulfuzjfx Ahven Machine equipped with : Automatic feeds/Slide tilting Dimensions WxDxH (mm) : 2300x1700x2600 Machine weight (T) : 3.5 Overall dimensions 2500x 2200 height 2400

Condition: good (used), Door lock mortiser SL 100 Nedpfxoygm Awo Ahvocn - with milling motors for faceplate and handle - with pneumatic clamps - 1.7 kW

Condition: new, Year of construction: 2025, Engine 7.5 kW, 50 Hz, 380 V, 3 phases Splitting pressure 20 tons Automatic saw yes Maximum trunk diameter 48 cm Maximum tree length 61 cm Feeder length 1.8 m Chain saw / splitter drive hydraulic max. 4800 rpm Saw and feeder control hydraulic Conveyor with winch 3.2 m length / 250 mm width Conveyor belt tilt angle ±15° (manually set) Conveyor belt speed 0.8 m/s Chain saw 22" Cylinder diameter 4" Ncedpfsv Dvfrsx Ahvon Conveyor belt length 3.2 m Cycle time 6 seconds Trailer wheel 12" 6-arm splitting wedge Hydraulic oil capacity 32 L Weight 737 kg The machine is placed on a wheeled chassis with a ball hitch. The saw-splitter is equipped with a 3.2 m long belt feeder that can transport processed wood directly to the trailer, the maximum height of wood feeding by the conveyor is 2 m The machine's capacity is about 5 - 8 cubic meters of wood per hour. Depending on the type wood. The machine can use various optional accessories, such as a hydraulic log feeder, wedges.

Condition: new, Year of construction: 2025, Engine 7.5 kW, 50 Hz, 380 V, 3 phases Splitting pressure 20 tons Automatic saw yes Maximum trunk diameter 38 cm Maximum tree length 61 cm Feeder length 1.8 m Chain saw / splitter drive hydraulic max. 4800 rpm Saw and feeder control hydraulic Conveyor with winch 3.2 m length / 250 mm width Conveyor belt tilt angle ±15° (manually set) Conveyor belt speed 0.8 m/s Chain saw 22" Cylinder diameter 4" Conveyor belt length 3.2 m Cycle time 6 seconds Trailer wheel 12" 4-arm splitting wedge Hydraulic oil capacity 32 L Weight 737 kg The machine is placed on a wheeled chassis with a ball hitch. The saw-splitter is equipped with a 3.2 m long belt feeder that can transport processed wood directly to the trailer, the maximum height of wood feeding by the conveyor is 2 m The machine's capacity is about 5 - 8 cubic meters of wood per hour. Depending on the type wood. The machine can use various optional accessories, such as a hydraulic log feeder, wedges. Nodpfxsv Dvhys Ahvjcn

Condition: good (used), Code: 0286 Ncedpfx Ajyfhtbjhvjn Brand: BFM Model: CU 80 - CE Standard Bit mortising machine for drilling holes and grooves in wood, joinery, furniture, doors, shelves, panels and various - CE Standard Technical data: Worktable dimensions mm 580 x 300 Wescott spindle connection 16 mm Motor Hp 3 - rpm 2800 Reverse rotation Vertical adjustment of unit mm 200 Workpiece clamping presser Overall dimensions mm 650 x 900 x 1300 h Weight kg 280

Condition: used, Year of construction: 2005, functionality: fully functional, overall weight: 1,600 kg, working range: 140 mm, type of input current: three-phase, input voltage: 400 V, - Polish production - year of production 2005 - DTR, CE TECHNICAL DATA: - range of diameters of processed dowels: 40-140mm - max. diameter of input material: 200mm - min. length of input material: 600mm - max. allowance for processing per side: 30mm - cutter head drive motor: 18.5kW - forward/reverse feed - feed motor: 1.5kW - 3 toothed pulling rollers - head: 4-knife - 3 smooth pulling output rollers - dimensions length/width/height: 2630x1240x1400mm Njdpfx Ahjv N Ebasvscn - weight: 1600kg

Condition: used, Year of construction: 1997, functionality: fully functional, total width: 1,240 mm, total length: 2,630 mm, total height: 1,400 mm, power of feed motor: 1,500 W, overall weight: 1,600 kg, working range: 140 mm, type of input current: three-phase, input voltage: 400 V, - Polish production - year of production 1997 - DTR - CE TECHNICAL DATA: - range of diameters of processed dowels: 40-140mm - max. diameter of input material: 200mm - min. length of input material: 600mm - max. allowance for processing per side: 30mm - cutter head drive motor: 18.5kW - forward/reverse feed - feed motor: 1.5kW - 3 toothed pulling rollers - 4-knife head - 3 smooth pulling output rollers - dimensions L/W/H: 2630x1240x1400mm Nodpfx Aov N Edbjhvscn - weight: 1600kg

Condition: like new (used), DEMONSTRATION MACHINE For sale is an as-new JET belt and disc sander JSG-31A with a 300 mm disc diameter. The demonstration unit is in original condition, so you receive the full warranty. Technical specifications: - Motor power: 1.1 kW / 1.5 HP / 230 V - Disc diameter: 300 mm Ncsdoycc Tdjpfx Ahvon - Disc speed: 2,700 rpm - Disc sanding table size: 230 x 420 mm - Sanding table tilt range (disc): -45° to +15° - Belt dimensions: 150 x 1,220 mm - Belt speed: 11.5 m/sec - Belt sanding table size: 190 x 330 mm - Sanding table tilt range (belt): -45° to 0° - Sanding arm tilt range (belt): 0° to 90° - Extraction port: 100 mm - Dimensions (LxWxH): 830 x 700 x 1,400 mm - Weight: 124 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Shipping (by freight forwarder): Austria: € 70.00 incl. VAT Germany: € 90.00 incl. VAT South Tyrol: € 110.00 incl. VAT Related terms: JET JSG-31A, belt sander, disc sander, belt, wood, combination sander, 150x1220, 300 mm, sanding machine, professional, workshop, stationary, machine Reference: R-A0117

Condition: like new (used), DISPLAY MACHINE For sale is an as-new JET double-drum sander DDS-237, equipped with a powerful 7.5 HP, 400 V motor and a maximum sanding width of 940 mm. The display machine is in original condition; therefore, you receive the full warranty. Technical data: - Motor: 400 V / 7.5 HP - Drum speed: 1,400 rpm - Feed speed: 3 m/min - Max. sanding width: 940 mm - Sanding thickness: 0.8 to 133 mm - Minimum workpiece length: 230 mm Njdpfx Aheycc R Njvecn - Sanding drum dimensions: 152 x 940 mm each - Sanding belt width: 75 mm or 100 mm - Dust extraction ports: 2 x 100 mm diameter - Dimensions (LxWxH): 1,090 x 1,420 x 1,090 mm - Weight: 440 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Freight shipping: Austria: €180.00 including VAT Germany: €210.00 including VAT South Tyrol: €240.00 including VAT Related terms: JET DDS-237, double drum sander, wide belt sanding technology, wood finishing, 7.5 HP drive, 400 V industrial, 940 mm working width, feed system, workshop machine, professional sanding equipment Reference: R-A0117

Condition: used, Year of construction: 2009, Weight 10 kg Year ca. 2009 x Ncsdox U A Nqjpfx Ahvsn

Condition: used, Year of construction: 1999, Weight 3 to x-travel 750 mm milling-head swivable +/- ja ja Nedpfx Aew Sydrjhvscn

Condition: used, Year of construction: 1997, Control Heidenhain TNC 407 serial number 60/1997 x-travel 1.000 mm y-travel 600 mm z-travel 700 mm TISCHMAß: 1300 X 600 mm Werkzeugwechsler: 24- fac Ncjdjumyhrjpfx Ahvsn

Condition: used, Year of construction: 1990, Weight . kg Year . Nedpfoud Tr Rex Ahvjcn content Rubintastkopf cbm

Condition: used, Year of construction: 2007, reus 8000 min-1 U/min Weight 5500 kg Year 2007 Control Siemens 840D Dimensions (L/W/H) 3600 x 2800 x 2400 mm travel -x axis 1035 mm Ncodjwm Rqaepfx Ahvsn travel -y axis 560 mm travel -z axis 510 mm

Condition: used, Year of construction: 1977, x-travel 700 mm Njdsqh Ehtepfx Ahvecn

Condition: used, Year of construction: 1989, x-travel 500 mm Nodpfx Ahsh Hrvfsvjcn y-travel 360 mm z-travel 420 mm control Heidenhain 355 tool taper SK 40 weight of the machine ca. 1,7 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Door lock milling machineused, good conditionmake Haffnertype SL 100machineNo. 2269upright machinechain setdoor supportworkpiece supportpusher hole motorforend motorlubricatorsuction connection D 80/100 mmspace requirement approx. 1200 mm x 700 mm x 2000 mmweight approx. 300 kgstorage location 97447 Gerolzhofen, free loaded, unpackedhandover in actual condition as inspected,without guarantee and warranty Ncjdpovwfmfjfx Ahven