Used broaching & slotting & drawing machines for sale (174)

Year of construction: 1980, condition: good (used), machine/vehicle number: 03.2123, Manufacturer: Arthur Klink Model: RISZ 25x 2500 x 500 Year of manufacture: 1980 Machine no.: 03.2123 Dcsdpfx Aodffzfsqlsk General / technical data: Used vertical hydraulic internal broaching machine with 3 broaching stations in very good condition. Pulling force: 25000 KG Broaching length: 2000 mm Number of broaching stations: 3 Distance between broaching stations: 160 mm Mounting diameter for broach holders: 3 x Ø 100 mm Clearance width between cylinders: Nominal size 500 mm Measured clearance width between cylinders: max. 590 mm Cutting speed: Hydraulically continuously adjustable from 1 m/min to max. 10 m/min Return speed: Hydraulically continuously adjustable from 5 to max. 25 m/min Machine footprint: (w x d x h) approx. 3400 mm x 3400 mm x 6900 mm (without pit) Power supply / connection value: 380 volts 50 Hz / 22 kW Accessories / special equipment: The machine is currently without a workpiece table. A workpiece sliding table was mounted on the machine, with a special workpiece clamping device for external broaching. (Workpiece sliding table can be modified). The tool clamping system is equipped with a hydraulic locking mechanism in the pull bridge and in the feed mechanism. The machine has a coolant system with an integrated chip conveyor. Remarks: The machine is in very good condition and still has its original paint. It is designed for use in series production, and for optimal use, a foundation (pit) is ideally required. Broach holders and pin ejectors are available upon request. The machine can be inspected at our warehouse.

Year of construction: 1960, condition: refurbished (used), machine/vehicle number: 1732, Vertical internal broaching machine with switching plate of the company Karl Klink Dsdpfsgyd Svox Aqljck Type: RSI6DT Machine No.: 1732 Year of manufacture: 1960 weight: 3,2 to broaching force: 6.000kg With switch plate ( 2 stations ) Power supply: 380V / 50Hz Rated current: 15 A Connected load: 4kW The machine is completely revised and is therefore in a very good condition.

Year of construction: 1964, condition: refurbished (used), machine/vehicle number: 2041, Vertical internal broaching machine with switching plate of the company Karl Klink Type: RSI8DT1 Machine No.: 2041 Year of manufacture: 1964 weight: 3,2 to broaching force: 8.000kg With switch plate ( 2 stations ) Power supply: 380V / 50Hz Dsdpfxsgyd S De Aqlock Rated current: 25 A Connected load: 5,5 kW The machine is completely revised and is therefore in a very good condition.

Year of construction: 1960, condition: not inspected (used), Forst RF 20x2000 internal broaching machine -WKG 189- Data: Manufacturer: Forst Type: RF 20x2000 Year of manufacture: 1959 Max. Tractive force: 20t Max. Stroke: 2000mm Max. Cutting speed: 5,6m/min Max. Return speed: 30m/min Max. Workpiece diameter: Ø 300mm Dcjdpfx Ashu E Egeqlok Max. Tool diameter: Ø 90mm Weight: 3,5t Remark: without tub

Condition: not inspected (used), Forst RF 16 internal broaching machine -WKG 1371- Technical data: Manufacturer: Forst Type: RF 16 Max. Tractive force: 16t Dcedpfx Ajhu E N Dsqlok Max. Stroke: 1200mm Max. Cutting speed: 5,6m/min Max. Workpiece diameter: Ø 700mm Max. Tool diameter: Ø 120mm Workpiece seat: Ø 70mm Note: control valve missing

Year of construction: 1989, condition: used, Manufacturer: Hönnema Model: KAT 63/1250 Year of manufacture: 1989 General / technical data: CNC grooving machine with partial or rotary table for twist grooving. Dodpfx Aqslu D Hkjleck Max. stroke: 1250mm Cutting speed: stepless from 0 to 16m/min Max. Return speed: 16m/min Max. Groove width: 63mm Fully automatic twist dividing attachment: RA 450 AUDR Remark: The feed is made by stepping motor and ball screw through the machine table. The machine table has a stable and smooth-running linear guide. The machine is approx. 1.500mm under floor! The machine is under power in our warehouse and can be inspected.

Year of construction: 1958, condition: used, machine/vehicle number: 1545, Manufacturer: Karl Klink Model: RIS 6 x 1000 Year of manufacture: 1958 Weight: 2500 KG General / technical data: Used vertical hydraulic internal cutting machine with 1 cutting station, in operational condition Pulling force: 6000 KG Cutting length: 1000mm Mounting diameter of the draw head: Ø 85 mm Dodpfx Aoda Ugijqlsck Passage width between the cylinders: max. 280 mm Cutting speed: hydraulically steplessly adjustable from 1 m/min to max. 7 m/min Return speed: hydraulically steplessly adjustable from 7 m/min to max. 25 m/min Machine footprint: (w x d x h) approx. 1000 x 1200 x 2800mm Power supply / connection value: 380Volt 50 Hz / 4KW Accessories / special equipment: The machine is equipped with a workpiece table for 1 cutting station. The tool clamping system is designed for a spring-mechanical locking mechanism (DIN 1415). The machine has an integrated coolant system. A double draw head for 2 flat cutting tools with a workpiece support plate is available. Remarks: The machine is in good condition for its age and is ready for immediate use. It is designed for manual operation in production with medium batch sizes. Ideally, a machine pit or, alternatively, a platform is required for operation. Draw heads are available upon request. The machine does not have a tool feed system. The machine can be inspected in our warehouse while it is powered.

Year of construction: 1973, condition: refurbished (used), machine/vehicle number: 5116/447, machine type: vertical internal broaching machine manufacturer: Rausch (Haan/Rhld) type: RS 6/1000 built in: 1973 totally rebuild in: 3/2021 by WiemersAG weight: 800kg pulling force: 60kN (80kN) broaching speed: 3m/min & 5m/min return speed: 10m/min maximum stroke: 1000mm maximum tool length: 1200mm table size /work surface: 610mm x 470mm (520mm x 320mm) working stations: 1 pcs drive: mechanic drive system engine: 5,5kW / 8,2kW / 8,2kW power supply: 400Volt/ 50Hz equipment: coolant system remark: machine under power in stock Dedpfxogw Hvcs Aqleck optional accessories available on request: tools, workpiece holder More detailed technical informations in the datasheet (german) in the annex. Information about us: we are specialized for second hand broaching machine and still have anytime about 80 pieces of used broaching machines in our stock, vertical and horizontal machines from 3000kg up to 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke.

Year of construction: 1987, condition: used, machine/vehicle number: 34, Max. pulling force: 10 tons Max. stroke: 1000 mm Dodend Dmjpfx Aqljck Cutting speed: 7.5 m/min Return speed: 24 m/min Weight: 6.2 tons The machine is suitable for cleaning tubes.

Year of construction: 1990, condition: excellent (used), Manufacturer: Arthur Klink Djdpfx Ajlpadyeqljck Year of manufacture: 1990 Model: RISZ 16 x 1250 x 400 / HG Technical data: Vertical internal broaching machine in technically very good condition tractive force: 16.000kg clearing speed: up to 27,5 m/min infinitely variable return speed: up to 34 m/min infinitely variable maximum stroke: 1250mm broaching units: 4 pieces accessories: - automatic tool changer - automatic part feeding (part specific) - hydraulic tool clamping device (part specific) Remark: High performance production broaching machine for high volume production with high cutting speed!

Year of construction: 1982, condition: good (used), machine/vehicle number: 3120, Varinelli - internal broaching machine 25.000 kg (our Ref. No. WAG 729) machine type: internal horizontal hydraulic broaching machine manufacturer: Varinelli type: BV 25 x 2000 x 630 built in: 1982 stroke: 2000mm pulling force: 25.000KG working stations: 3 PCs drive: hydraulic system equipment: coolant system, chip conveyer remark: machine in stock, moving workpiece table Optional accessories available on request: tools, workpiece holder Information about us: we are specialized for second hand broaching machine and still have anytime about 80 pcs of used broaching machines in our stock, vertical and horizontal machines from 3000kg up 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke Dcjdpfx Aqjd I R Ngjlsk

Year of construction: 1965, condition: good (used), functionality: fully functional, machine/vehicle number: 2549, General / technical data: used horizontal hydraulic internal broaching machine in a good condition according to age with manual tool feeder in heavy design clearing stroke: 2.000mm Tractive force: 25,000 kg (250KN) Mounting in the drawbridge: Ø 105mm Cylindrical Through-hole in the clamping table: Ø 125mm Workpiece clamping surface: 440mm x 440mm Workpiece diameter: max. approx. 800mm (due to the tool trough of the tool feeder) Cutting speed: hydraulically infinitely variable from 1.5 m/min to 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to 25 m/min Oil volume: hydraulics approx. 450L / coolant approx. 100L Space requirement of the machine: (w x d x h) approx. 8,400 mm x 1,350 mm x 1,800 mm (without working area) Dcjdjtuuvzjpfx Aqljk Power supply: 380Volt 50 HZ Connected load: 19kw Equipment: - the machine has a mechanical hydraulic control for the clearing & return stroke - the machine has an integrated coolant system - the machine has a manually operated tool feed system - The broaching carriage with the pulling head holder is guided flat on both sides. - The machine has an adjustable tractive force limiter - Tractive force display Accessories - 1 universal pulling head for flat shafts up to a maximum width of approx. 40 mm - dividing head (see pictures) - Various special fixtures and clamping devices - Machine documentation Remarks: The machine can be used for the production of keyways with flat broaching tools, as well as for profile broaching. In combination with the machine bed of the machine and the stable broaching tool feeder, the machine is very well suited for heavy profile broaching tools. The machine is used and is in good condition for its age. The machine is available for inspection in our warehouse. The machine is new in our stock and is currently not technically or visually refurbished. Pulling heads for profile broaching are available on request, depending on DIN standard, dimensions and stock.

Condition: good (used), overall weight: 10,364 kg, Year of construction: 2019, 2019 GENERAL BROACH 10-30 GBTU VERTICAL TABLE UP BROACH Equipped with: Retriever Shuttle Table Chip Conveyor Auto Load Grayco Lube AB Panelview Coolant Tank & Pump Specifications: Capacity: 10 Ton Stroke: 30" Dodportrzajfx Aqlock Table Up 1″ Puller / Retriever Hydraulic Power Unit Chip Conveyor Machine Dimensions (approx.): 165″ x 48″ x 60″ Machine Weight Total (approx.): 22,800 lbs. Machine Column (approx.) : 13,000 lbs. Base w/ Chip Conveyor (approx.): 4,700 lbs. Electrical Panel (approx.): 600 lbs. Hydraulic Power Unit (approx.): 4,500 lbs.

Condition: good (used), Year of construction: 1980, machine/vehicle number: 20007, Offer 23326 Technical specifications: - Broaching tool width up to 10 mm - Broaching tool length up to 1000 mm - Pulling force: 1.5 t - Working speed: 4 m/min - Working / operating height: 1000 mm - Drive: 400 V / 1.5 kW - Required space: approx. W 1500 x H 1000 x D 400 mm Dodpfx Aeyfgc Ieqlsck - Weight: approx. 200 kg

Condition: good (used), Year of construction: 1971, machine/vehicle number: 170119003210A0, Offer 25217 Technical data: - Groove width: 3 to 36 mm - Max. groove length: 340 mm - Bore diameter: 10 to 350 mm - Feed rate: 0.01 - 0.22 mm - Cutting speed: 2 - 10 m/min - Return speed: 20 m/min - Max. pulling force: 1.5 t - Max. workpiece weight: 3 t - Table size: 350 x 450 mm - Working / operating height: 1050 mm - Drive: 400 V / 3 kW - Space requirement: approx. W 900 x H 1250 x D 700 mm - Weight: approx. 900 kg Dsdpfx Aewu Suvoqlock - Extensive accessories as shown

Condition: used, Year of construction: 2000, Technical details: pulling force - max.: 2,5 t max. ram stroke: 1000 mm Dodpjw Dugaefx Aqleck max. workpiece diameter: 40 mm Broaching speed: 60 m/min. return speed: 20 m/min. total power requirement: 24 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 1,7 x 2,4 x 4,77 m clamping plate: 320 mm It is a hydraulic machine. *

Condition: used, Year of construction: 1964, serial number 23046 stroke 320 mm +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Dcedpfsfgpdrox Aqljk +++++

Condition: good (used), Cardinal Broach Dedpfeq R T Hcsx Aqleck Model TM7

Condition: used, Year of construction: 1989, stroke 600 mm hydraulic ja keins dabei Djdsw Sykfopfx Aqljck weight 3,7 t

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, operating hours: 3,710 h, machine/vehicle number: -, Cold rolling line DEM MTO 760/2 Year 2013 Djdpfx Aqsvduwmoleck Motor hours: 3710 Units and components: 1. SVV/2 twin vertical axis coil decoiler 2. RD 140/1 mechanical scale breaker 3. SA-CLR lubrication unit 4. MTO 760/2 2-block cold rolling machine 5. BOM 1250 horizontal axis winder 6. Electrical cabinet 7. Operator control panel. We will answer any additional questions in writing.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1972, operating hours: 24 h, machine/vehicle number: 2025, overall weight: 5,200 kg, power: 10 kW (13.60 HP), input voltage: 380 V, input frequency: 50 Hz, broaching length: 320 mm, workpiece diameter (max.): 630 mm, total length: 2,650 mm, total width: 1,810 mm, total height: 2,890 mm, Slotting Machine STANKO 7M430 The STANKO model 7M430 is a heavy-duty vertical slotting machine, designed for machining internal keyways, slots, internal splines, and profiled surfaces in large and heavy workpieces. Manufactured in 1972, this machine is intended for industrial applications requiring robust construction, high rigidity, and reliable operation. The machine is equipped with a rotary worktable with a diameter of 630 mm, allowing flexible positioning of workpieces. The maximum stroke length of the ram is 320 mm (minimum stroke 120 mm), providing a wide working range for various slotting operations. The slotting head can be swivelled ±10°, enabling angular machining and increased versatility. Feeds along the X- and Y-axes are adjustable in the range of 0.2 to 2.4 mm per double stroke, while the rotary feed of the table can be set from 0.1 to 1.4°, ensuring precise control of cutting parameters. The maximum permissible table load is 3000 kg, making the machine suitable for large and heavy components. The distance from the table surface to the chisel guides is 500 mm, and the machine offers generous table travels: 650 mm longitudinal, 500 mm transverse, with 360° table rotation. The drive motor has a power rating of 10 kW, providing sufficient cutting force for demanding machining tasks. With overall dimensions of approximately 2650 × 1810 × 2890 mm and a total weight of about 5200 kg, the STANKO 7M430 features a rigid cast-iron construction that ensures excellent vibration damping and long-term stability. Condition: Dodpsx U Tr Asfx Aqljck *Used machine *Ready for operation *Fully functional *Operating hours: approx. 24 h Scope of delivery: *Complete set of change gears *Technical passport (Russian) *Operating manual (Russian) Typical applications: *Slotting of internal keyways *Machining of internal splines *Profile machining of internal surfaces *Machining of large and heavy components *General mechanical engineering and repair work

Condition: excellent (used), Year of construction: 1989, machine/vehicle number: 0435532, MACHINE DATA Machine type Hobbing Cutter – Gear cutter Manufacturer TOS Model FO-10 Year 1989 Serial Number 0435532 Condition Very good-almost new Yet in operation Max Module 14 Min Module 1.5 Max diam. 1500mm Max Width 450mm Dsdsd R Ri Uspfx Aqleck From Z9 teeth until Z448 Main drive 12 Kw Weight 9800Kg Original color RAL 6017 Book operation – service Dimensions L 3200 – W 1800 – H 2530 Full extra accessories – parts – all module cutters Ready to work without any expensive PRICE 70.000€

Year of construction: 2000, condition: excellent (used), SMS MEER CNC DOUBLE SIDED CHAMFERING MACHINE Manufacturer: SMS MEER Type: RFA 14 Yom: 2000 Working range: tube Ø 21,3 – 114,3 mm Wall thickness 2,3 - 11 mm Length: 6-12m Composed of two RFA14 chamfering machines with transport devices between the machines. Dsdpfx Ajghrgueqlsck The task of machines is to chamfer inside and outside both ends of the tubes. The range of diameters of chamfered tubes 21.3-114,3mm and wall thickness of 2.3-11mm in the length range of 6-12m. The task of transport in the area of the chamfering machines is to collect the tubes from the roller table and move them between the chamfering machines.

Year of construction: 2004, condition: excellent (used), Type: HRA4/80-4 Pipes: Ø 6 ÷ 24 mm, wall thickness = 1 ÷ 2,5 mm • Point: Ø3 ÷ 12 mm Dsdpfxshmfh Hj Aqleck

Year of construction: 1986, condition: like new (used), More information on request Dedpfx Ajhmfnhjqljck