Internal broaching machine

Hoffmann RISZ 10x1250x400

Year of construction: 1980, condition: used, max. tractive force: 10 to max. stroke: 1250 mm Ijdpfx Ahecdtple Neal max. cutting speed: 10 m/min max. return speed: 27 m/min max. workpiece diameter: 320 mm turning: 3 pieces weight: 4,8 to automatic tool feeder hydraulic drawing head and end piece holder locking device automatic loading device for workpiece diameter up to 100mm magnetic belt conveyor

Condition: good (used), Year of construction: 2000, operating hours: 10,000 h, functionality: fully functional, turning length: 1,105 mm, turning diameter: 610 mm, spindle speed (max.): 3,500 rpm, spindle bore: 70 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 210 mm, travel distance Z-axis: 1,137 mm, mount diameter: 63 mm, rotational speed (max.): 6,000 rpm, type of input current: AC, Equipment: rotational speed infinitely variable, The machine is in good condition. Major maintenance work in recent years: 30.04.2020: Milling spindle overhauled CHF 35,000 16.07.2021: Software update (Wenk AG) CHF 1,600 20.06.2022: Central lubrication pump replaced CHF 400 (All prices are in CHF) Known issues: - Error message during startup - Coolant from internal cooling leaks out at the rear of the milling spindle - Overload message when the machine is cold and running at 100% rapid traverse - Over 150 different tool holders included - Spare magazine sleeves for tool magazine - Spare limit switches for tool changer position monitoring - 2 x 3-jaw chuck diameter 250 mm (mounted for inspection) - 1 x 3-jaw chuck diameter 250 mm - 1 x 3-jaw chuck diameter 300 mm - 1 x 4-jaw chuck diameter 400 mm - 2 sets of hard jaws for external clamping, short version - 1 set of hard jaws for external clamping, long version - Various sets of used soft jaws - Spare filters for the high-pressure system (Kowap) (5 units in stock; approx. 2 units available by delivery – 1 filter approx. CHF 20-25) - Coolant cleaning system or oil separator (custom built) Iaodpjxp Hmasfx Ah Njl - Storage cabinet customized to fit the tool magazine for KM63 holders, numbered for 80 positions - Specific clamping equipment suited for the KM63 holders, allowing direct indexable insert clamping - Iscar disc milling cutter suitable for a D160 mm holder, 4 mm width - Gear milling cutter suitable for a holder (custom built – for soft jaws, pitch = 1.5 mm) - Cleaning/deburring brush suitable for a holder We are also happy to provide leasing and financing offers for the machine. A viewing appointment can be arranged upon request.

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 124, Price upon request Used CNC Vertical Lathe Manufacturer MORI SEIKI Model VL 55 Year of manufacture 2001 With MSC 518 CNC control, 12-tool turret, and chip conveyor Turning length = 653 mm Turning diameter = 550 mm X-axis = 350 mm Z-axis = 660 mm Speed up to = 2000 rpm Spindle power = 30 kW Approx. weight = 12.5 t Price upon request Specifications: Used CNC Vertical Lathe Manufacturer MORI SEIKI Model VL 55 YOM 2001 With MSC 518 CNC control, 12-tool turret, and chip conveyor Iaodpfswl An Iox Ah Nsl Turning dia. = 550mm Turning length = 653 mm X-Axis = 350mm Z – Axis = 660 mm Speed = 2000 rpm Spindle power = 30 kW Weight approx.. = 12.5 t

Year of construction: 1985, condition: good (used), machine/vehicle number: 04.2187, Hydraulic indoor broaching machine in technically good condition Manufacturer: Arthur Klink Iaedpfxsixntwe Ah Nol Year of manufacture: 1985 reconditioned Weight: 2t Model: RIW 10 x 1200 x 400 Machine No: 04.2187 Tractive force: 10.000kg at 3m/min clearing speed: hydraulically stepless adjustable from 1m/min to 7m/min return speed: hydraulically stepless adjustable from 7m/min to 30m/min maximum stroke: 1200mm Broaching tool clamping: universal drawing head for flat shanks up to 26mm width maximum workpiece diameter: Ø max. 480mm (due to oil and chip tray) table opening: Ø 70mm power supply: 380 Volt / 50 Hz / 5kW

Year of construction: 1979, condition: ready for operation (used), Max. grinding diameter: 300mm, Max. grinding length: 1950mm, Max. workpiece length: 2000mm Max Feed rate 1 – 30 m/min. Coolant supply 100 l/min Inf. variable speed range 2.000 – 6.000 RPM. Spindle 88 mm Centers height 150 mm Grinding wheels 100 – 250 mm Iajdpfx Ahohq Uige Nsl Spindle power 3,5 kW Grinder Power 15 kW – 380 V – 50 Hz

Condition: good (used), Year of construction: 2006, operating hours: 119,571 h, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45,000 m/min, rapid traverse Y-axis: 45,000 m/min, rapid traverse Z-axis: 45,000 m/min, controller model: Siemens 840 D, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hermle C30 U Siemens 840D Machine ON: 119,571 h, Spindle ON: 56,792 h - Spindle HSK-A63 10,000 rpm - 32 tool stations - Rotary table SRT 280 mm with integrated clamping system HSK100 (if not needed, it can be covered or alternatively converted to a zero-point clamping system) - External coolant supply - Internal coolant supply with 80 bar paper band filter - Chip flushing gun - Chip conveyor - Handheld control module - Automatic cabin door - 32 tool stations plus 87 additional stations ZM87 - Thermal compensation - BLUM tool measurement on the side - Renishaw probe - Chip container - Status light The machine has been thoroughly inspected and comes with a geometry report as well as circularity test measurements. The machine can be viewed and tested under power at any time. Iodpfx Aexcp Sreh Njal Very well-maintained condition.

Year of construction: 1990, condition: reconditioned (used), tangential grinding machine Brand: Jakobsen Model: 1432 Iajdpfjiv S Avox Ah Nel Year: 1990 rpm: 1400 Grinding area: 800x400mm Table size: 1000x350mm Maximum load on table: 400kg Maximum piece height: 475mm Grinding wheel size: 350x50x127mm Heidenhain ND 221B height indicator. Magnet table 800x350mm electronic Selter with magnetization regulator. Maximum distance between table and grinding wheel: 650mm MONNET brand filter of the year 2007 Includes sets of wheels (See photos).

Year of construction: 2025, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 2025, Worked overtaken subhead new Fortuna Automat A 4 rolls Press Revised subhead / knife Star Dough - recoated subhead Iajdpfx Aecnz Theh Nel with knife Cross in exchange Built with setting on request!

Year of construction: 2020, condition: new, Designed for plug in complete system on a mobile stainless steel base plate incl. juice pump, with 63KW Wolf Oil boiler, 2 heatexchanger, heat-holding section for approx. 20-30 second and automatic control. Components: Heating circuit, heating pump and expansion tank, 2 heatexchanger for juice preheating / recooling and heation uo to 80°C. 24 m heat-holding section, automatic pneumatic temperature control. Isdecx R Ddepfx Ah Neal Capacity 3000 l juice per hour (depending on juice temperature).

Condition: good (used), Year of construction: 2004, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the Iajdpjul Efmefx Ah Nol radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data