Used broaching & slotting & drawing machines for sale (179)

Condition: refurbished (used), functionality: fully functional, Year of construction: 2023, input voltage: 400 V, broaching length: 1,000 mm, number of broaching positions: 1, broaching speed: 3 m/min, Manufacturer: Rausch (Haan/ Rhld) Model: RS 4/1000 Machine No.: 5027 Year of manufacture: 2001/2023 Weight: 580 kg Overhauled: 3/2023 by Wiemers AG Iiodpfx Apsw H Dgnecjg General / Technical Data: Unused, overhauled mechanical vertical broaching machine Rausch RS 4, with current “CE” certification Pulling force: 40 kN (4,000 kg) Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1,000 mm Maximum tool length: 1,200 mm Table dimensions / Working area: 540 x 340 mm / 450 x 250 mm Table opening: Ø 90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (H x W x D): 2,350 mm x 900 mm x 1,000 mm (with splash-guard cabin) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Accessories / Special equipment: - Drive with 2 speeds - Safety door with interlock and chip chute - Chip chute with tool storage - Electric clamp jaw sensing (tool removal monitoring to prevent unintentional retraction of the drawbridge) - Integrated coolant system with solenoid valve (controlled via swing system) - Patented coolant/lubricant swiveling system - Externally adjustable tool length setting system (reproducible across multiple machines) - 4 central lubrication points for the trapezoidal spindle drive - Closed centering plate for profile tools with additional protection plate for flat broaching tools (keyway tools) - 3-sided enclosed splash guard cabin with tool storage (ideal for profile broaching) - External control panel (connected via Harting plug connector) Remarks: The machine has been completely overhauled, the machine body thoroughly reconditioned. The following wear parts have been replaced: - New trapezoidal spindles and spindle nuts made from cast, wear-resistant bronze - All bearings and seals replaced The coolant system (pump, check valve, and drain valve) including coolant/lubricant swing system is new - Coolant supply is controlled via a solenoid valve, which can be switched over by the swing system - The drawbridge as well as the clamping jaws and rack segments are new - A deactivatable clamping jaw detection system has been installed (additional safety for operator & to prevent tool breakage) - A safety door with interlock, signal display, and door lock - The tool length adjustment system has been relocated outside the machine compartment - Additional end-position limit switches have been installed - Complete new electrical system (control cabinet) - No PLC installed, machine is electrically maintenance-friendly - New drive motor (SEW Germany) with brake - The machine has been freshly painted with 2-component structural paint General The dual spindle drive ensures smooth, centralized pulling force and consistent broaching speed (broaching speed selectable: 3 m/min or 6 m/min). By design, the machine is quick and simple to set up for broaching with flat broaching tools for keyway cutting. Thanks to the universally constructed design of the drawbridge and machine table, operation with both profile and flat broaching tools is possible without the need for additional drawheads.

Condition: ready for operation (used), Year of construction: 2011, A modified MECO internal keyway slotting machine is available. Keyway width range: 4mm-45mm, max. square keyway diameter: 36mm, max. hexagonal keyway diameter: 36mm. The machine was modified and can now slot square and hexagonal keyways. Documentation available. An on-site inspection is possible. Iijdpoy Hvqrsfx Apcjg

Condition: ready for operation (used), Year of construction: 2012, A vertical internal broaching machine (broaching tower) Karl Klink with lift table and loading portal is available. Broaching force: 63kN, broaching stroke: 1000mm, spindle stroke: 400mm, broaching speed: 7.5m/min, return speed: 24m/min, stations: 1, table width: 500mm. Machine dimensions X/Y/Z: approx. 3700mm/3000mm/3200mm, weight: approx. 3500kg. Documentation available. An on-site inspection is possible. Iiodpfxjxwcvmo Apcog

Condition: like new (used), Year of construction: 2022, functionality: fully functional, total length: 2,900 mm, total height: 1,500 mm, total width: 1,600 mm, type of input current: three-phase, For sale is a Maqford BEA2 forming machine. Working length 150-1500mm, sheet thickness max. 2.0mm, pipe diameter 120-600mm. Including a set of packages for individual diameters. Isdpfx Apswmniasceig

Condition: used, Year of construction: 1986, overall weight: 6,500 kg, power: 42 kW (57.10 HP), input voltage: 380 V, broaching length: 1,600 mm, number of broaching positions: 1, workpiece diameter (max.): 500 mm, Manufacturer: Varinelli Milano Italy Model: BV 25 x 1600 x 500 Year of manufacture: 1986 Weight: 6,500kg Mach. No.: 3269 General / technical data: Vertical hydraulic internal broaching machine with one broaching station Pulling force: 25,000 kg Broaching stroke: 1,600mm Ijdpjwqmaxofx Apceig Broaching stations: 1 piece! Passage width between the cylinders: max. 540mm Cutting speed: hydraulically stepless adjustable from 1 m/min up to max. 8 m/min Return speed: hydraulically stepless adjustable up to max. 18 m/min Required space for the machine: see image of machine layout plan Power supply / connection value: 380 Volts 50 Hz / 42 kW Accessories / special equipment: The machine is equipped with a workpiece table for 3 broaching stations. The tool clamping system is equipped with a spring-mechanical locking (DIN 1417) in the pulling bridge. The tool feeder system is hydraulically-mechanically locked. The machine has a coolant system with integrated chip conveyor for installation in a pit. Remarks: The machine is still in its original paint. It is designed for use in mass production for medium and large batches; for optimal use, a foundation (pit) is ideally required. Pulling heads and needle pushers are available on request. The machine can be inspected at our warehouse. General information We constantly have a large selection of about 80 used broaching machines with pulling forces from 3,000 kg to 63,000 kg in horizontal as well as vertical design in stock. A large part of the broaching machines in stock is ready for demonstration and inspection. If required, we can offer you used equipment such as pulling heads, needle pushers, broaching tools, and other specific accessories. We are also a contract broaching company and can assist you with technical questions from 50 years of experience in broaching technology.

Year of construction: 1987, condition: ready for operation (used), An old Schumag Aachen drawing machine without control is available. Drawing force: 100kN, drawing speed: 80m/min, material diameter range: 25mm-43mm. On-site inspection is possible. Ijdpfxov Tctue Apceig

Condition: excellent (used), Type: U3E1000 Machine no.: 17098 Iisdpfx Apezvq Axscsg Year of manufacture: 1982 Data: Engine power: 3 kW Pull length: 1000 mm Dimensions, W x D x H approx.: 900 x 700 x 1600 mm Weight (estimated): 300 kg ... 3 clearing needles

Condition: excellent (used), functionality: fully functional, Slotting machine Urpe model M-300 G of tilting head, Slotting of course of 0-300mm of travel, number of blows per minute 30-35-40, distance of the tool to the column 500mm, distance adjustable from the table to the ram 425 -585mm, max distance between tool and body 450mm, table surface 800x325mm, long table travel 550mm, rec transv 265mm, motor pot 5.5cv, estimated weight 1850kg, with Chuck Ijdevdknzopfx Apcoig

Condition: used, Year of construction: 1985, 32 mm 12 mm stroke 330 mm Iiodpfx Apjwkvthocsg pulling capacity 3,0 t total power requirement 1,2 kW weight of the machine ca. 0,65 t dimensions of the machine ca. 1,2 x 0,8 x 1,2 m Keyway broaching and slotting machine with accessories as shown. Good condition.

Condition: used, Year of construction: 1978, throat 1410 mm workpiece height max. 1150 mm stroke 1400 mm table diameter 1400 mm milling-head swivable +/- 10 ram - range of adjustment 750 mm Isdpfx Apjyqvgtocjig pulling power 50000 N workpiece weight 10000 kg Ram stroke speed 30 m/min The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, functionality: fully functional, Type: Hydraulic Guillotine Manufacturer: HJO, Sweden Year: 1984 Max. plate thickness 4 mm Max. plate length 2500 mm Max. operating pressure 21.0 MPa V 3 x 380 Iisdpfoxgcz Isx Apceg Hz 50 Weight 3700 kg Quick action blade clearance adjustment, floor pedal control.

Condition: ready for operation (used), functionality: fully functional, Urpe M-200 G mortising machine, number of strokes per minute: 40-55-75, adjustable distance from table to ram: 181-525 mm, maximum distance between tool and body: 280 mm, table surface area: 666x280 mm, longitudinal travel of the table: 435 mm, transverse travel: 235 mm, tilting headstock, motor power: 1 hp, estimated weight: 700 kg. Iisdpfx Apezmp Ibjcjg

Year of construction: 1991, condition: ready for operation (used), Groove width range: 2mm-32mm, max. ram stroke: 300mm, stroke rate: 300 strokes/min, max. installation height: 450mm, feed: 0.01mm-0.15mm, working speed: 30m/min, return speed: 30m/min, machine dimensions X/Y/Z: approx. 2500mm/1500mm/2200mm, weight: approx. 2200kg, control: fk electronic Dialog CNC. On-site inspection is possible. Iiedpfx Aou D Aagjpcjg

Year of construction: 1999, condition: like new (used), functionality: fully functional, Manufacturer: Arthur Klink Ijdpfx Aper A Hcbeceig Year of construction: 1999 Type: horizontal broaching machine Model: RIW 10x1600x400 Weight: 2.700 KG General / technical data: horizontal hydraulic internal broaching machine in mint condition with tool holding system ideal for the use of flat broaching tools. Broaching stroke: 1.600mm Tractive force: 10,000 kg (100kN) Mounting in the drawbridge: Ø 85mm Cylindrical Through-hole in the clamping table: Ø 100mm Workpiece diameter: max. 400mm (due to the machine body of the tool trough) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Space requirement of the machine: (w x d x h) approx. 6,400 mm x 1,450 mm x 1,600 mm (without working area) Power supply: 400Volt 50 HZ Connected load: 9kw Equipment: - the machine has an electric control for the clearing stroke movement with manual operation and automatic sequence - the machine has an integrated coolant system - the machine has a tool holding system for flat broaching tools (no feed) - The broaching carriage with the pulling head holder is equipped with a flat guide on both sides Accessories - 1 universal pulling head for flat shanks from 3mm to max. 25mm wide and a maximum pulling force of 10kN (10,000kg) - Complete machine documentation and CE declaration of conformity Remarks: The machine is ideal for the production of keyways. Due to the connection with the stable machine bed of the machine and the broaching tool holding system, the machine is particularly suitable for quick and easy use of flat broaching tools. The machine has been used very little and is in mint condition. The machine is available for inspection in our warehouse and is ready for demonstration under power. Our direct contact details and further information about the machine can be found in the attached PDF document

Year of construction: 1978, condition: good (used), U.S. MODEL 50TX120 VERTICAL PULL DOWN BROACH Equipped with: Retriever Puller Hydraulic System Coolant System Chiller Chip Conveyor Isdpfxsrtrzls Apceig Manuals Specifications: Normal Broaching Capacity: 100,000 Lbs at 922 PSI Peak Force Capacity: 133,600 Lbs at 1350 PSI Main Slide Stroke (Bump Inches): 106 Maximum Cutting Speed: 20 Ft/Min. Maximum Return Speed: 40 Ft/Min. Main Pump Motor: 75 HP at 900 RPM Hydraulic Reservoir: 365 Gallons Handling Pump Motor: 10 HP at 1200 RPM Coolant Pump Motor: 1.5 HP at 1800 RPM Coolant Pump Capacity: 100 Gallons / Min at 23 Head Ft. Coolant Reservoir Capacity: 600 Gallons Approx. Floor Space ( Width x Depth x Height): 65" x 96" x 243" Net Weight, Approximate: 79,000 #

Condition: ready for operation (used), Year of construction: 1998, overall weight: 2,900 kg, power: 8 kW (10.88 HP), input voltage: 380 V, number of broaching positions: 1, total width: 6,100 mm, total height: 1,900 mm, Manufacturer: Karl Klink Model: RW 10 Year of manufacture: 1959 / 1998 Weight: 2,900 kg Machine No.: 1194 General Information / Technical Data: Hydraulic internal broaching machine in operational condition Broaching stroke: 1,420 mm Tensile force: 10,000 kg Diameter of drawhead mount in the draw bridge: 85 mm Broaching tool clamping: universal drawhead for flat shanks up to 25 mm width Through-hole in the clamping table: Ø 100 mm Workpiece diameter: max. approx. 360 mm (limited by the machine body of the tool feeder) Cutting speed: hydraulically infinitely variable from 1 m/min to 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 4,100 (6,100) mm x 800 mm x 1,900 mm (excluding work area) Power supply / connected load: 380 Volt 50 Hz / 8.0 kW Accessories / Special Features: • The machine is equipped with manual-hydraulic control for the broaching stroke movement • The machine has an integrated coolant/lubricant system • The machine features a basic oil drip tray fitted to the machine bed, without tool feeder Iiedpfjxtcz Iex Apcsg Remarks: The machine is ideal for the production of keyways and profiles. Broaching needles, arbors, and drawheads can be supplied on request.

Condition: excellent (used), Year of construction: 2007, pulling force - max. 9 t max. ram stroke 2000 mm max. workpiece diameter 900 mm total power requirement 25 kW weight of the machine ca. 4,2 t Iijdpfeycxlcex Apcjg

Year of construction: 1985, condition: good (used), machine/vehicle number: 04.2187, Hydraulic indoor broaching machine in technically good condition Manufacturer: Arthur Klink Year of manufacture: 1985 reconditioned Weight: 2t Model: RIW 10 x 1200 x 400 Machine No: 04.2187 Iodpfoixntwex Apceig Tractive force: 10.000kg at 3m/min clearing speed: hydraulically stepless adjustable from 1m/min to 7m/min return speed: hydraulically stepless adjustable from 7m/min to 30m/min maximum stroke: 1200mm Broaching tool clamping: universal drawing head for flat shanks up to 26mm width maximum workpiece diameter: Ø max. 480mm (due to oil and chip tray) table opening: Ø 70mm power supply: 380 Volt / 50 Hz / 5kW

Condition: good (used), Square broaching tool, multi-slot broaching needle, broaching tool, broaching needle, slotting tool, slotting tool, push broaching needle, keyway push broaching needle -Manufacturer: Forestry, Clearing Needle, Push Clearing Needle, 3 pieces Ijdezlgb Njpfx Apcsig -Type: see photos -Keyway width: 2x 10 mm / 1x 12 mm -Submission/Price: complete -Transport dimensions: 1085/33/H32 mm -Weight: 6.5 kg

Condition: used, Year of construction: 2000, Technical details: pulling force - max.: 2,5 t max. ram stroke: 1000 mm max. workpiece diameter: 40 mm Broaching speed: 60 m/min. return speed: 20 m/min. total power requirement: 24 kW weight of the machine ca.: 6 t Ijdpfx Aew Dugaspcoig dimensions of the machine ca.: 1,7 x 2,4 x 4,77 m clamping plate: 320 mm It is a hydraulic machine. *

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 2,200 kg, power: 3.7 kW (5.03 HP), input voltage: 400 V, input current: 7 A, input frequency: 50 Hz, broaching length: 200 mm, number of broaching positions: 4, broaching speed: 25 m/min, workpiece diameter (max.): 460 mm, total length: 1,717 mm, total width: 1,221 mm, total height: 1,885 mm, Special Offer – 5% Discount Available! Metal Slotting Machine B5020 – 200 mm Stroke The Metal Technics Polska B5020 Metal Slotting Machine is a professional industrial machine designed for machining keyways, splines, internal grooves and other precision slotting operations. Its rigid construction, large rotary table and automatic feeds ensure excellent machining accuracy, high productivity and reliable operation. The machine is ideal for tool rooms, maintenance departments and manufacturing facilities. With a maximum slotting force of 5 kN, a 200 mm ram stroke and a 360° rotary table, it is suitable for a wide range of precision machining applications. Main Features * 200 mm ram stroke * Heavy-duty industrial construction * Ø460 mm rotary table * Automatic longitudinal, cross and rotary feeds * Adjustable ram inclination * Maximum slotting force: 5 kN * High machining precision * CE certified Technical Specifications * Model: B5020 * Maximum ram stroke: 200 mm * Stroke speeds: 32 / 50 / 80 / 125 strokes/min * Ram inclination: 0°–8° * Vertical ram adjustment: 200 mm * Table diameter: 460 mm * Maximum table load: 400 kg * Longitudinal table travel: 420 mm * Cross table travel: 420 mm * Table rotation: 360° * Maximum tool size: 25 × 40 mm * Maximum slotting force: 5 kN * Main motor power: 3 kW * Feed motor power: 0.7 kW * Machine dimensions: 1717 × 1221 × 1885 mm * Machine weight: 2200 kg Applications * Keyway machining * Internal splines * Internal grooves * Slotting operations * Tool rooms * Maintenance workshops * Metalworking * Industrial manufacturing Transport and Delivery The machine is supplied brand new and includes a 12-month warranty, CE Declaration of Conformity, technical documentation, warranty and professional after-sales support. Spare parts are readily available. Iisdpfx Apszf Huiecog We provide professional transport throughout Europe using specialized machinery logistics. Every machine is securely loaded, protected during transport and delivered directly to the customer's premises. We also assist with export documentation and international shipping arrangements. Worldwide shipping is available upon request. About Metal Technics Polska Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery. We supply high-quality machines throughout Europe and provide expert technical advice, spare parts and comprehensive after-sales support. Contact us today for pricing, delivery times, machine availability, additional photos, videos or a personalized quotation.

Condition: excellent (used), Habegger ( Burri / Petermann) Iisdpfewwmr Ijx Apceg Can & Spline Slotting Machine Swiss made

Condition: like new (used), quantity 18 set Assorted Frömag grooving cutters, sold as a set -> 6x 6P9 - 15° Ø18-20 - A61 Isdpfx Apezf Np Asceig -> 2x 6P9 - 15° Ø17-18 - A60H / A60 -> 1x P59 - 15° - A-SO-60 -> 2x P59 - 15° - A51 -> 3x 4P9 - 15° Ø13-15 - A40 -> 1x 4P9 - 15° Ø12 - A40 -> 1x 3P9 - 15° Ø13-15 - A30 -> 2x 6 - Ø18-20 Individual purchases also available—just ask

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, operating hours: 3,710 h, machine/vehicle number: -, Cold rolling line DEM MTO 760/2 Year 2013 Motor hours: 3710 Units and components: 1. SVV/2 twin vertical axis coil decoiler 2. RD 140/1 mechanical scale breaker 3. SA-CLR lubrication unit 4. MTO 760/2 2-block cold rolling machine 5. BOM 1250 horizontal axis winder 6. Electrical cabinet Ijdpovduwmefx Apcjig 7. Operator control panel. We will answer any additional questions in writing.

Year of construction: 1989, condition: used, Manufacturer: Hönnema Model: KAT 63/1250 Year of manufacture: 1989 General / technical data: CNC grooving machine with partial or rotary table for twist grooving. Iiodpfslu D Hkex Apcog Max. stroke: 1250mm Cutting speed: stepless from 0 to 16m/min Max. Return speed: 16m/min Max. Groove width: 63mm Fully automatic twist dividing attachment: RA 450 AUDR Remark: The feed is made by stepping motor and ball screw through the machine table. The machine table has a stable and smooth-running linear guide. The machine is approx. 1.500mm under floor! The machine is under power in our warehouse and can be inspected.