Used broaching & slotting & drawing machines for sale (183)

Condition: like new (used), functionality: fully functional, Year of construction: 2025, overall weight: 370 kg, power: 3.5 kW (4.76 HP), input voltage: 400 V, input frequency: 50 Hz, broaching length: 800 mm, broaching speed: 3 m/min, total length: 920 mm, total width: 800 mm, total height: 1,950 mm, Manufacturer: Rausch (Haan/ Rhld) Model: RS 3 G/800 Machine No.: 2968/424 Year of manufacture: 1970 Weight: 370kg Overhaul: 8/2025 by Wiemers AG Our Ref. / Machine No.: WAG 787 General / Technical Data: Unused, overhauled mechanical vertical broaching machine by Rausch Pulling force: 3,000kg (30kN) Broaching speeds: 3m/min and 6m/min Return speed: 3m/min Maximum stroke: 800mm Maximum tool length: 1,000mm Table size / working surface: 340mm x 220mm / 430mm x 310mm Table opening: Ø 90mm for standard broaching mandrels Workpiece diameter: unlimited (without spray guard cabin) Dimensions (h x w x d): 1,950mm x 820mm x 900mm (h = table height from floor without attachments) Motor: 3.5kW Power supply: 400 Volt / 50 Hz Accessories / Special Features: - Modified drive system with geared motor and toothed belt drive - 2 broaching speeds: 3m/min & 6m/min - External stroke adjustment, cross-machine reproducible tool length adjustment system - Integrated coolant unit with check valve and drain cock, including selector switch for automatic operation (does not automatically switch in swivel mode) - Patented coolant/lubricant swivel system - Three-sided enclosed, front-open spray guard cabin (no external operator panel) - Machine enclosure below the safety door with chip guard and tool storage area - Electrical cabling within steel protective conduits - Electrical jaw monitoring (tool removal control to prevent unintended retraction of the pull bridge) - Safety door with integrated emergency stop function - Control panel made from stainless steel sheet with permanent marking - 4 central lubrication points for the trapezoidal spindle drive - Machine documentation Remarks: The machine is fully overhauled, with the frame completely refurbished. The following wear parts have been replaced: - New trapezoidal spindles and spindle nuts made from cast wear-resistant bronze Isdpfxjytvyxo Ap Hjbb - All bearings and seals replaced - Central drive shaft is new - Coolant system (pump, check valve and drain cock), including coolant/lubricant swivel system, is new - Jaws are new (pull bridge additionally reinforced) - A switchable jaw monitoring system has been installed (additional safety for operators and to prevent tool breakage) - A safety door with interlock has been installed instead of the rubber reach-in protection - Tool length adjustment system relocated outside the machine compartment - Additional limit switches installed - Complete electrical system (control cabinet) with Siemens components is new - Control panel made of stainless steel with durable labeling - New geared drive motor (SEW) with toothed belt drive - Machine has been repainted with 2-component structural paint The machine is stored at our warehouse and can be inspected under power.

Condition: excellent (used), Habegger ( Burri / Petermann) Can & Spline Slotting Machine Ibsdpewwmr Iefx Ap Hob Swiss made

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, machine/vehicle number: M 09074, overall weight: 950 kg, power: 8 kW (10.88 HP), input voltage: 400 V, Technical Specifications: Manual Adjustment: 400mm manual adjustment Automatic Broaching Stroke: 250mm, automatic stroke Keyway Widths: 2 to 32mm Workpiece Diameter: 620mm Maximum Thrust Force: 20kN fixed value Cutting Speed: 15 m/min, infinitely variable Dimensions (W x D x H): 1000 x 1200 x 2440mm Net Weight: approx. 950kg Ijdpeyazc Sefx Ap Hobb Electrical Connection: 3 x 400 VAC, 50/60 Hz, 8kW Pneumatic Connection: not required Colour: Blue RAL 5001, Grey RAL 7035 For further details, please see the PDF description in the attachment.

Condition: used, Year of construction: 1978, throat 1410 mm workpiece height max. 1150 mm Ijdpfx Apeyqvgto Hebb stroke 1400 mm table diameter 1400 mm milling-head swivable +/- 10 ram - range of adjustment 750 mm pulling power 50000 N workpiece weight 10000 kg Ram stroke speed 30 m/min The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Year of construction: 1972, condition: used, Max. pulling force: 10 tons Max. stroke: 1250 mm Max. cutting speed: 10 m/min Max. return speed: 25 m/min Number of die positions: 3 Throat depth: 470 mm Ibjdpocdtnhofx Ap Hob Distance between die positions: 125 mm Table: 400 x 400 mm Special equipment: Chip removal via a permanent magnet chip conveyor 1 hydraulic unit, 1 work platform, electrically controlled hydraulic ram and end-piece holder, automatic feeding device

Year of construction: 1961, condition: used, General / technical data: Vertical duplex external broaching machine with two tables Manufacturer: Karl Klink Model: RSA 10 T/Zw. Year of manufacture: 1961 weight: approx. 6.500kg tractive force: 10t clearing speeds: 1 - 11m/min return speeds: 7 - 25m/min maximum stroke: per machine unit 1250mm clamping area: 500 x 500mm passage width: 380mm power supply: 380 Volt / 50 Hz Remark: Isdpfx Ajlwu Hrep Hjbb The machine is under power in our warehouse and can be inspected.

Condition: used, functionality: fully functional, Manufacturer: Arthur Klink Year of construction: ca.1960 Type: horizontal broaching machine Model: RH 10-50 Machine. No.: 241 Weight: 3.700 KG General / technical data: used horizontal hydraulic internal broaching machine in a good condition according to age with manual tool feeder in heavy design Clearing stroke: 1,500 mm Tractive force: 10,000 kg (100KN) Mounting in the drawbridge: Ø 85mm Cylindrical Through-hole in the clamping table: Ø 100mm Workpiece clamping surface: Ø 460mm Workpiece diameter: max. approx. 750mm (due to the tool trough of the tool feeder) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 7 m/min Return speed: hydraulically infinitely variable from 5 m/min to 30 m/min Space requirement of the machine: (w x d x h) approx. 6500mm x 950 mm x 1,400 mm (without working area) Power supply: 380Volt 50 HZ Connected load: 8kw Equipment: - the machine has a mechanical hydraulic control for the clearing & return stroke - the machine has an integrated coolant system - the machine has a manually operated tool feed system - The broaching carriage with the pulling head holder is guided flat on both sides. - The machine has an adjustable tractive force limiter Accessories - 1 universal pulling head for flat shafts from 3mm to max. 25mm wide - Adapter sleeve for drawbridge from Ø 85mm to Ø 63mm Remarks: The machine can be used for the production of keyways with flat broaching tools, as well as for profile broaching. In combination with the machine bed of the machine and the stable broaching tool feeder, the machine is well suited for heavy profile broaching tools. The machine is used and is in very good condition for its age. The machine is in our warehouse and can be inspected under power. The machine is currently not technically and visually refurbished, but can be used immediately. Pulling heads for profile broaching are mostly available used on request depending on DIN standard, dimensions and stock. Isdpsr A Hdgefx Ap Hobb Direct contact details and further information can be found in the attached PDF document

Year of construction: 1960, condition: not inspected (used), Forst RF 20x2000 internal broaching machine Isdpfx Apshu E Egj Hsbb -WKG 189- Data: Manufacturer: Forst Type: RF 20x2000 Year of manufacture: 1959 Max. Tractive force: 20t Max. Stroke: 2000mm Max. Cutting speed: 5,6m/min Max. Return speed: 30m/min Max. Workpiece diameter: Ø 300mm Max. Tool diameter: Ø 90mm Weight: 3,5t Remark: without tub

Year of construction: 1982, condition: good (used), machine/vehicle number: 3120, Varinelli - internal broaching machine 25.000 kg (our Ref. No. WAG 729) machine type: internal horizontal hydraulic broaching machine manufacturer: Varinelli type: BV 25 x 2000 x 630 built in: 1982 stroke: 2000mm pulling force: 25.000KG working stations: 3 PCs drive: hydraulic system equipment: coolant system, chip conveyer remark: machine in stock, moving workpiece table Optional accessories available on request: tools, workpiece holder Ibjdpfxjd I R Ngo Ap Hjb Information about us: we are specialized for second hand broaching machine and still have anytime about 80 pcs of used broaching machines in our stock, vertical and horizontal machines from 3000kg up 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke

Year of construction: 1983, condition: excellent (used), machine/vehicle number: 03.2133, Arthur Klink - internal broaching machine (KOM 138) machine type: internal vertical hydraulic broaching machine manufacturer: Arthur Klink type: RISZ 16 x1250 x400 built in: 1983 stroke: 1250mm Ibedped Nb A Nsfx Ap Hsb pulling force: 16.000KG working stations: 3 PCs drive: hydraulic system equipment: coolant system, magnetic chip conveyer remark: in an excellent condition, ready to use, perfect slides Optional accessories available on request: pulling head, pick up tool holder Information about us: we are specialized for second hand broaching machine and still have anytime about 80 pcs of used broaching machines in our stock, vertical and horizontal machines from 3000kg up 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke

Year of construction: 1977, condition: excellent (used), machine/vehicle number: 3273, Neff - internal broaching press Ijdpfx Apod N Rl Nj Hebb machine type: vertical hydraulic broaching press manufacturer: Neff Germany type: 16 SRKA built in: 1977 stroke: 1300 pulling force: 16.000KG working stations: 1 PCs drive: hydraulic system equipment: coolant system remark: machine under power in stock Information about us: we are specialized for second hand broaching machine and still have anytime about 80 pcs of used broaching machines in our stock, vertical and horizontal machines from 3000kg up 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke

Year of construction: 1965, condition: good (used), functionality: fully functional, machine/vehicle number: 2549, General / technical data: used horizontal hydraulic internal broaching machine in a good condition according to age with manual tool feeder in heavy design clearing stroke: 2.000mm Tractive force: 25,000 kg (250KN) Mounting in the drawbridge: Ø 105mm Cylindrical Through-hole in the clamping table: Ø 125mm Workpiece clamping surface: 440mm x 440mm Workpiece diameter: max. approx. 800mm (due to the tool trough of the tool feeder) Cutting speed: hydraulically infinitely variable from 1.5 m/min to 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to 25 m/min Oil volume: hydraulics approx. 450L / coolant approx. 100L Space requirement of the machine: (w x d x h) approx. 8,400 mm x 1,350 mm x 1,800 mm (without working area) Power supply: 380Volt 50 HZ Connected load: 19kw Equipment: - the machine has a mechanical hydraulic control for the clearing & return stroke - the machine has an integrated coolant system - the machine has a manually operated tool feed system - The broaching carriage with the pulling head holder is guided flat on both sides. - The machine has an adjustable tractive force limiter - Tractive force display Ibsdpfxotuuvzj Ap Hjb Accessories - 1 universal pulling head for flat shafts up to a maximum width of approx. 40 mm - dividing head (see pictures) - Various special fixtures and clamping devices - Machine documentation Remarks: The machine can be used for the production of keyways with flat broaching tools, as well as for profile broaching. In combination with the machine bed of the machine and the stable broaching tool feeder, the machine is very well suited for heavy profile broaching tools. The machine is used and is in good condition for its age. The machine is available for inspection in our warehouse. The machine is new in our stock and is currently not technically or visually refurbished. Pulling heads for profile broaching are available on request, depending on DIN standard, dimensions and stock.

Year of construction: 1980, condition: good (used), machine/vehicle number: 03.2123, Manufacturer: Arthur Klink Model: RISZ 25x 2500 x 500 Year of manufacture: 1980 Machine no.: 03.2123 Ibsdpfx Aodffzfjp Hjb General / technical data: Used vertical hydraulic internal broaching machine with 3 broaching stations in very good condition. Pulling force: 25000 KG Broaching length: 2000 mm Number of broaching stations: 3 Distance between broaching stations: 160 mm Mounting diameter for broach holders: 3 x Ø 100 mm Clearance width between cylinders: Nominal size 500 mm Measured clearance width between cylinders: max. 590 mm Cutting speed: Hydraulically continuously adjustable from 1 m/min to max. 10 m/min Return speed: Hydraulically continuously adjustable from 5 to max. 25 m/min Machine footprint: (w x d x h) approx. 3400 mm x 3400 mm x 6900 mm (without pit) Power supply / connection value: 380 volts 50 Hz / 22 kW Accessories / special equipment: The machine is currently without a workpiece table. A workpiece sliding table was mounted on the machine, with a special workpiece clamping device for external broaching. (Workpiece sliding table can be modified). The tool clamping system is equipped with a hydraulic locking mechanism in the pull bridge and in the feed mechanism. The machine has a coolant system with an integrated chip conveyor. Remarks: The machine is in very good condition and still has its original paint. It is designed for use in series production, and for optimal use, a foundation (pit) is ideally required. Broach holders and pin ejectors are available upon request. The machine can be inspected at our warehouse.

Condition: used, Year of construction: 1966, Max. pulling force: 5 t, max. stroke: 850 mm, max. cutting speed: 12 m/min, max. return speed: 25 m/min, clamping area: 410 x 575 mm, groove width: 3 - 90 mm, drilling diameter: 13 - 500 mm, workpiece weight: 6000 kg, depth of the machine base below floor level: 1,400 mm. Ibedpfecm Elnsx Ap Hob

Year of construction: 1987, condition: used, machine/vehicle number: 34, Max. pulling force: 10 tons Max. stroke: 1000 mm Cutting speed: 7.5 m/min Return speed: 24 m/min Weight: 6.2 tons The machine is suitable for cleaning tubes. Ibsdpfx Aend Dmjp Hsb

Condition: new, diameter 32 - 50mm der Buchsen length 350 mm groove width 10 - 12 - 14 mm weight 20 kg dimensions 400 x 150 x 250 mm Groove widths: 10 - 12 - 14mm Diameter of the guide bushes: 32 - 34 - 35 - 36 - 38 - 40 - 42 - 44 - 45 - 46 - 48 - 50mm Ijdpfsupxk Djx Ap Hsbb

Year of construction: 1964, condition: good (used), functionality: fully functional, machine/vehicle number: 2016, Used vertical hydraulic internal broaching machine with 3 broaching points Tractive force: 16,000 kg clearing length: 1.250 mm Broaching points: 3 pieces Distance between the broaching points: 380 mm Mounting diameter of the broaching heads 3 x Ø ___mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 7 m/min Return speed: hydraulically infinitely variable from 7 to max. 25 m/min Space requirement of the machine: (w x d x h) approx. 2,200 x 1,550 x 4,200 (without pit) Power supply / connected load: 380Volt 50 HZ Ibedpfxot Dv I Ao Ap Hsb Accessories / special equipment: The machine is equipped with a workpiece table with 3 holes for 3 broaching positions. The tool clamping system is provided for spring-mechanical locking in the drawbridge and hydraulically mechanical in the feeder. The machine has been electrically (PLC Siemens S7) and mechanically modernized in 2004. The machine has an integrated coolant system. Remarks: The machine is designed for use in series production, ideally a foundation (pit) or optionally a platform is required for optimum use. Drawing heads and needle lifters are available on request. The machine can be viewed in our warehouse.

Condition: excellent (used), Year of construction: 1991, Keyway broaching machine Elmass, suitable for keyways up to 14 mm wide. Maximum working stroke 200 mm. Thanks to the bore-guided tool, this Elmass system can also be used to broach extra-long keyways. Tools for standard bores with diameters of 6-50 mm and keyway widths of 2-14 mm are available. Ijdpold S S Sofx Ap Hobb This tool system is also suitable for blind hole drilling. Thanks to the 400 mm rotary table, multiple keyways can also be broached.

Year of construction: 1989, condition: used, Manufacturer: Hönnema Model: KAT 63/1250 Year of manufacture: 1989 General / technical data: CNC grooving machine with partial or rotary table for twist grooving. Max. stroke: 1250mm Cutting speed: stepless from 0 to 16m/min Isdpjlu D Hkofx Ap Hobb Max. Return speed: 16m/min Max. Groove width: 63mm Fully automatic twist dividing attachment: RA 450 AUDR Remark: The feed is made by stepping motor and ball screw through the machine table. The machine table has a stable and smooth-running linear guide. The machine is approx. 1.500mm under floor! The machine is under power in our warehouse and can be inspected.

Year of construction: 1980, condition: used, Max. tensile force: 10 tons Max. stroke: 1250 mm Ibedpfx Apscdtpls Heb Max. cutting speed: 10 m/min Max. return speed: 27 m/min Max. workpiece diameter: 320 mm Number of units: 3 Weight: 4.8 tons Automatic tool feeder Hydraulic draw-in head and end piece holder locking system Automatic feeding device for workpiece diameters up to 100 mm Magnetic belt chip conveyor

Year of construction: 1971, condition: excellent (used), Horizontal internal broaching machine Arthur Klink RIW 16x1800 -WAG 718- Manufacturer: Arthur Klink Type: RIW 16 x 1800 Iedshpqquepfx Ap Hjbb Year of manufacture: 1971 Max. Tractive force: 16t Max. Stroke: 1800mm Max. Cutting speed: 7m/min Max. Return speed: 25m/min Max. Tool diameter: Ø 95mm Weight: 4,8to

Year of construction: 1985, condition: good (used), machine/vehicle number: 04.2187, Hydraulic indoor broaching machine in technically good condition Manufacturer: Arthur Klink Year of manufacture: 1985 reconditioned Ibodpoixntwjfx Ap Hob Weight: 2t Model: RIW 10 x 1200 x 400 Machine No: 04.2187 Tractive force: 10.000kg at 3m/min clearing speed: hydraulically stepless adjustable from 1m/min to 7m/min return speed: hydraulically stepless adjustable from 7m/min to 30m/min maximum stroke: 1200mm Broaching tool clamping: universal drawing head for flat shanks up to 26mm width maximum workpiece diameter: Ø max. 480mm (due to oil and chip tray) table opening: Ø 70mm power supply: 380 Volt / 50 Hz / 5kW

Year of construction: 1958, condition: used, machine/vehicle number: 1545, Manufacturer: Karl Klink Model: RIS 6 x 1000 Year of manufacture: 1958 Weight: 2500 KG General / technical data: Used vertical hydraulic internal cutting machine with 1 cutting station, in operational condition Ijdpfeda Ugijx Ap Hsbb Pulling force: 6000 KG Cutting length: 1000mm Mounting diameter of the draw head: Ø 85 mm Passage width between the cylinders: max. 280 mm Cutting speed: hydraulically steplessly adjustable from 1 m/min to max. 7 m/min Return speed: hydraulically steplessly adjustable from 7 m/min to max. 25 m/min Machine footprint: (w x d x h) approx. 1000 x 1200 x 2800mm Power supply / connection value: 380Volt 50 Hz / 4KW Accessories / special equipment: The machine is equipped with a workpiece table for 1 cutting station. The tool clamping system is designed for a spring-mechanical locking mechanism (DIN 1415). The machine has an integrated coolant system. A double draw head for 2 flat cutting tools with a workpiece support plate is available. Remarks: The machine is in good condition for its age and is ready for immediate use. It is designed for manual operation in production with medium batch sizes. Ideally, a machine pit or, alternatively, a platform is required for operation. Draw heads are available upon request. The machine does not have a tool feed system. The machine can be inspected in our warehouse while it is powered.

Year of construction: 1956, condition: used, machine/vehicle number: 1413, Manufacturer: Karl Klink Model: RISZ 10x 1200 Year of manufacture: 1956 Weight: 3450 KG Machine No.: 1413 General / technical data: Used vertical hydraulic internal machining machine with up to 3 machining stations, in ready-to-use condition. Pulling force: 13000 KG (maximum) Machining length: 1200 mm Machining stations: 3 Distance between machining stations: 100 mm Mounting diameter for the draw head: Ø 85 mm Passage width between the cylinders: max. 390 mm Isdpfodbmgmsx Ap Hebb Cutting speed: hydraulically continuously adjustable from 1 m/min to max. 7 m/min Return speed: hydraulically continuously adjustable from 7 m/min to max. 25 m/min Machine footprint: (w x d x h) approx. 1150 x 1500 x 3725 mm (tool delivery system extended) Power supply / rated power: 380 V 50 Hz / 7.5 kW Accessories / special equipment: The machine's draw bridge has 3 tool holders for machining tools, and the workpiece table has 1 machining station (can be modified). The tool clamping system and the tool delivery system are designed for a spring-mechanical locking system (DIN 1415). The machine has an automatic tool delivery system, and the existing mount for the tool delivery system is also designed for only 1 tool (middle machining station). The machine has an integrated coolant system for cutting oil. Remarks: The machine is in good condition for its age and is ready for immediate use. It is designed for manually operated production use with medium batch sizes. The machine has an automatic cycle. For use, a machine pit or, alternatively, a platform is ideally required. Draw heads, tool holders, and tools are available upon request. The machine can be inspected in our warehouse while powered up.

Condition: ready for operation (used), Year of construction: 1998, overall weight: 2,900 kg, power: 8 kW (10.88 HP), input voltage: 380 V, number of broaching positions: 1, total width: 6,100 mm, total height: 1,900 mm, Manufacturer: Karl Klink Model: RW 10 Year of manufacture: 1959 / 1998 Weight: 2,900 kg Machine No.: 1194 General Information / Technical Data: Hydraulic internal broaching machine in operational condition Broaching stroke: 1,420 mm Tensile force: 10,000 kg Diameter of drawhead mount in the draw bridge: 85 mm Broaching tool clamping: universal drawhead for flat shanks up to 25 mm width Through-hole in the clamping table: Ø 100 mm Workpiece diameter: max. approx. 360 mm (limited by the machine body of the tool feeder) Cutting speed: hydraulically infinitely variable from 1 m/min to 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 4,100 (6,100) mm x 800 mm x 1,900 mm (excluding work area) Power supply / connected load: 380 Volt 50 Hz / 8.0 kW Accessories / Special Features: Ibjdpfx Ajxtcz Iep Hjb • The machine is equipped with manual-hydraulic control for the broaching stroke movement • The machine has an integrated coolant/lubricant system • The machine features a basic oil drip tray fitted to the machine bed, without tool feeder Remarks: The machine is ideal for the production of keyways and profiles. Broaching needles, arbors, and drawheads can be supplied on request.