Used Cnc Drill for sale (12,268)

Condition: excellent (used), Year of construction: 2018, 2018 KALTENBACH KDP1036 CNC DRILLING / MILLING / SCRIBING LINE – KBS 1051 SAWING LINE. Gbsdpfx Afjxmvm Rsiju INFEED CROSS TRANSFERS T13 20.5 METRES INFEED CAPACITY. GRIPPER FED MATERIAL MEASUREMENT KDP1036 3 AXIS. AUTOMATIC TOOL CHANGER. 500MM SUB AXIS FOR MILLING, DRILLING, MARKING & TAPPING. INTEGRATED CHIP CONVEYOR KBS 1051 SAW HORIZONTAL AND VERTICAL CLAMPING AUTOMATIC FEED CONTROL Automatic adjustment of saw band angle LS 270 MEASURING HEAD OUTFEED 19.750mm OUTFEED CROSS TRANSFERS T13

Condition: good (used), Year of construction: 1992, Ref. -No.: 10578 Manufacturer: UNION Type: BFT 130 NC Year of construction: 1992 Gsdpfxjxc Tuqo Afiebu Type of control: CNC Control: Heidenhain 430 Storage location: Halberstadt Country of origin: Germany X-Travel: 2000 mm Y-Travel: 1600 mm Z-Travel: 1600 mm W-Axis: 600 mm Spindle Diameter: 130 mm W-Travel (Boring Spindle): 900 mm Table Load: 8000 kg Clamping Area: 1800 x 2000 mm T - groove width: 28 mm T - slot spacing: 160 mm Tool Taper: ISO 50 Spindle Turning Speed - Stepless: 1000 RPM Spindle Speed: 10 - 2000 RPM Max. Torque On The Boring Spindle: 3150 Nm Rapid Traverse X-Axis: 2500 m / min Rapid Traverse Z-Axis: 2500 m / min Drive Capacity - Spindle Motor: 15 - 30 kW Borehole Diameter: 800 mm W-axis feed: 2500 mm / min Y-axis feed: 2500 mm / min Table size: 2000 x 1600 mm Rapid adjustments W-axis: 3150 mm/min. Rapid adjustment Y-axis: 5000 mm / min Cross slide movement: 320 mm Torque max. face support: 5300 Nm Tarpaulin diameter max.: 1400 mm Machine length: 6000 mm Machine width: 4000 mm Machine Height: 4000 mm Weight Of The Machine Ca.: 40 t Further information: The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 2022, DESCRIPTION OF THE DRILLING MACHINE This is a high-performance automatic drilling center designed for furniture components. The machine is dedicated especially to large-scale production in small batches. The drilling machine allows for drilling two components simultaneously. WORKPIECE TRANSPORT The machine is equipped with a magazine from which the components are collected by grippers mounted on a chain conveyor. TECHNICAL SPECIFICATIONS: Workpiece length: 280 – 1500 mm* Workpiece width (1 piece): 45 – 450 mm Workpiece width (2 pieces), three-sided drilling (right, left, top): 45 – 400 mm Workpiece width (2 pieces), four-sided drilling (right, left, top, front/rear edge): 45–300 mm (mirror image: 45–350 mm) Workpiece width (2 pieces), five-sided drilling (right, left, top, front edge, rear edge): 45–300 mm Horizontal drilling: From 25 mm from the edge of the component along the X-axis Workpiece thickness: 12 – 40 mm Total power: Approx. 24 kW Weight: Approx. 5,500 kg Gbjdpfxevdq Ube Afisu Dimensions: 5,100 x 2,500 x 2,450 mm Number of top drilling units: 4 Number of horizontal drilling units: 1 left, 1 right Total number of spindles: 80 pcs.* Number of material stops: 2 pcs. Simultaneous drilling of 2 components: Yes Supported file formats: .dxf, .mpr *The drilling machine is available in two variants: maximum panel length 1,500 mm and 2,500 mm NUMBER OF DRILLING UNITS: Top vertical heads: 4 pcs. Left horizontal head: 1 pc. Right horizontal head: 1 pc. DUST EXTRACTION: Vertical heads: With dust extraction ports Horizontal heads: With dust extraction ports

Condition: new, Year of construction: 2025, functionality: fully functional, Advanced machining centre for drilling, designed for high performance and precision. An ideal solution for furniture manufacturers, enabling complete processing of workpieces in a single working cycle. Equipped with TPA control. Automatic CNC six-sided drilling machine FEATURES AND EQUIPMENT - Six-sided drilling – complete vertical and horizontal machining in one cycle. - Drilling heads: 9 top vertical drills, 9 bottom vertical drills, 8 horizontal drills (2 per side). - TPA control – user-friendly interface with integration capability for CAD/CAM software. - QR and barcode reader. - Absolute encoders – ensure accurate positioning and repeatability. - Automatic tool change. TECHNICAL SPECIFICATIONS: Maximum workpiece width: 1200 mm Workpiece thickness: 10–48 mm Minimum workpiece width: 50 mm Maximum workpiece length: 5000 mm Gedsxfrakopfx Afiebu Minimum workpiece length: 250 mm

Condition: used, Year of construction: 2003, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, FANUC ROBODRILL T21i DL CNC DRILL-TAP MACHINE MAKE FANUC, MADE IN JAPAN MODEL ROBODRILL T21i DL CONTROL FANUC 16I-MB YEAR 2003 TABLE SIZE 850.0 x 410.0 mm Gedpfx Astnh Alefijbu TRAVERSES X Y Z 700.0 x 400.0 x 330.0 mm SPINDLE SPEED 10 – 20,000 RPM ATC 21 STATIONS SPINDLE TRAPER ISO 30 RAPID TRAVERSE 54m/min DISTANCE BETWEEN SPINDLE NOSE TO TABLE 150.0 mm – 480.0 mm CUTTING FEEDRATE 1 – 30,000mm/min TOOL CHANGE TIME 1.6 sec MAX TOOL DIA 80.0 mm MAX TOOL LENGTH 200.0 mm MAX TOLL WEIGHT 2 kgs POWER RATING 5.5 Kw PLUS SWARF TRAY COOLANT SYSTEM SET OF TOOLING SET OF MANUALS

Condition: excellent (used), CNC-Gantry Flexible Automatic through-feed Boring Machine with Dowels inserting system Movable panel (horizontal position of workpiece/panel), movable working head Numerical Control Power Control, Software WoodWOP Overall integral safety cabin (enclosure) of the machine Panels (workpieces) feeding by motorized belts 3 Feeding speed (m/min) 1 - 90 (ca.) Minimum workpieces dimensions (X - Y - Z) mm 250 x 100 x 12 Maximum workpieces dimensions (X - Y - Z) mm 3000 x 1400 x 60 Maximum stroke of the axis (X - Y - Z) mm 3580 x 1838 x 125 Two panels simultaneously processables (in Y axe) mm 600 + mm 600 Total installed power (Kw) 38 WORKING GROUPS (TOP): Drilling heads with vertical spindles (No.) 1 Independent vertical boring spindles (No.) 38 + 3 special Independent horizontal boring spindles (No.) 6 Circular Grooving Saw (on X axis) dia. (mm) 100 Gbodpfxsd Nvi Dj Afiou Vertical electro-spindle (No.) 1 x SK 30 (Vertical electro-spindle motor power (Kw 6) Automatic Tools Changing System, Tools storage plate (No. 3 folds- positions) WORKING GROUPS (HORIZONTAL) Drilling heads with horizontal spindles (No.) 2 Horizontal drilling spindles - Right side (No.) 13 + Left side (No.) 13 Inserting nozzle and glue injectors (Right side) No. 2 + (Left side) No. 2 Storage tanks for automatic feeding of the dowels (No.) 1

Condition: excellent (used), Year of construction: 1974, functionality: fully functional, travel distance X-axis: 4,600 mm, travel distance Y-axis: 3,000 mm, table load: 25,000 kg, spindle diameter: 160 mm, table length: 2,500 mm, table width: 2,000 mm, CNC control BOSCH CC300 Godjwcnf Hepfx Afijbu

Condition: used, Technical details: Gedpfewi Ni Hjx Afiebu drill diameter: 5,,,,40 mm drilling length: 600 mm lip angle: 90-150 ° total power requirement: 4,5 kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: 2-2-2 m CNC programmable according to ISO Point angle 90-140 degrees, disc stroke x 80mm y 80mm grinding wheel 6mm to 150mm ceramic or CBN speed 2500 to 6000 rpm Grinding options - 3 facets 6 surface grinding (Renault patent) - conical surface grinding with cross-section correction / point thinning / cross point. / Type 2/1 Avyac grind / 4 faces gr. Cross for deep drill .... *

Condition: like new (used), Year of construction: 2023, turning diameter 620 mm turning length 1500 mm control Siemens 808D spindle bore 100 mm turning diameter over slide 420 mm Gjdpfx Afjlar N Neisbu spindle turning speed range 10 - 4000 U/min main drive 41 kW rapid traverse speed 10000 mm/min total power requirement 65 kW weight of the machine ca. 9 t dimensions of the machine ca. 6,4 x 3,0 x 2,5 m Control unit CNC Siemens 808D new Drives/Servomotores, 24 month warranty on equipment - Chip Conveyor - Tool cooling system - Tailstock - Tool changer (Tower) with 8 positions OPTIONAL INCLUDED - - piece support (Lunete)

Condition: good (used), Year of construction: 2005, travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, In good technical condition. Year of modernization: 2005. Main electric motor power: 37 kW Installed machine power: 50 kVA Maximum machine length and width (including control cabinets): 7800 x 7200 mm Maximum machine height: 4900 mm Assembled floor space: 50 square meters Required installation height: 5800 mm Maximum workpiece weight: 12000 kg Work spindle diameter: 130 mm Spindle taper: ISO 50 Work spindle throat: 800 mm Godpjwc Sm Isfx Afiebu Work spindle speed range: 5 to 1800 rpm Distance of spindle axis from table clamping surface (Y): 70 mm Table clamping surface: 2500 x 1800 mm

Condition: new, Year of construction: 2025, functionality: fully functional, feed length X-axis: 2,100 mm, feed length Y-axis: 3,000 mm, feed length Z-axis: 300 mm, High-performance CNC router – the complete solution for wood and composite materials processing The CNC router 2130 ATC Master Drill NEST is designed for efficient processing of solid wood doors, furniture fronts made of chipboard, MDF or other similar materials. Equipped with a powerful 9 kW air-cooled motor, it allows for high-quality finishes and cutting at speeds of over 18 m/min. Solid and durable construction The 10 mm steel base provides stability, and the HIWIN industrial sliding system with 30 mm rails and recirculating balls ensures precision and speed in any working position. The clamping of the parts is carried out by vacuum, and the centralized lubrication system reduces wear and maintenance. Automatic performance and high productivity The automatic loading and unloading table, together with the adjustable 3-piston loading device and the material pushing system, optimizes work cycles. Optical sensors automatically detect the presence of plates, reducing errors and downtime. Gedpfx Afowhbppoisbu Advanced precision and versatility The drive system on the X and Y axes with bevel gear and rack, and on the Z axis with ball screw, guarantees smooth movements and total control. The linear tool magazine with 8 or 12 positions, pneumatically operated, allows for quick cutter changes, increasing process efficiency. Intelligent control and compatibility The NC Studio control unit is easy to use and compatible with most CAD/CAM software. Precise spindle adjustments and automatic tool measurement contribute to accurate machining, even in continuous mode. Essential Auxiliary Equipment Multi-operation Drilling Unit Impact and vibration resistant polyamide table Double piston reference limiters Efficient exhaust hood Strategically placed emergency buttons Key Benefits: Fast and quality machining with minimal personnel Low maintenance and extended service life Fully automated system for maximum efficiency This CNC router is part of the ATC Drill NEST series and is ideal for modern workshops looking for speed, precision and automation in the production of furniture, doors or decorative panels. Available in the 2128 ATC Drill NEST, 2140 ATC Drill NEST, 2145 ATC Drill NEST variants. Flexibility in configuration gives you full control over the machine model required for your business. Manufacturer DANIBRUM – Romania Working surface X - Y 2100 x 3000 mm Height stroke 300 mm Milling motor power 9 kW Maximum working speed 24000 rpm Motor cooling mode Air Converter yes Hiwin linear guide 30 mm Height adjustment - Z axis TBI 2502 ball screw Basic system with controller NC STUDIO Supply voltage 400 V – 3 Phase – 50 HZ Technical support available in Romanian, English, German.

Condition: new, Year of construction: 2025, functionality: fully functional, The CNC 4.0 drilling and doweling machine is a device for a fast drilling process, glue feeding and doweling. The machine is CNC controlled and is equipped with two drilling heads (horizontal and vertical with independently operating spindles) and a doweling unit (horizontal doweling). Main features: The solution of the glue and dowel feeding gun system guarantees precise shooting into the material. The machine has two working zones (right/left). It can dowel elements up to 1200 mm wide. In the case of strip elements, it is possible to dowel 2 elements simultaneously. The maximum thickness of the doweled element is 40 mm. Technical Specification: Number of CNC controlled heads: 1 Head positioning: servo Pin diameter: Ø 8 (optional: Ø6 or Ø8) Work table height: 900 mm Minimum element width: 50 mm Maximum element width: 1200 mm Minimum element thickness: 10 mm Maximum element thickness: 40 mm Maximum drilling depth (horizontal): 35 mm Maximum drilling depth (vertical): 30 mm Maximum vertical distance of the head from the edge of the element: 50 mm Unit movement speed: 50 m/min Spindle speed: 2840 RPM Total power: 7 kW Godpfxjvtxn Uj Afisbu Dimensions: 2135 x 1710 x 2330 mm Weight: 1400 kg

Year of construction: 1988, condition: used, Manufacturer: Haacke type: UW II A-CNC year of construction: 1988

 Gbjdpjg Tvmbsfx Afiou only for step drills up to max. Ø 30mm cross adjustment: 250mm height adjustment: 250mm grinding length: 400mm weight: 1,4t footprint: 2,5 x 1,2 x 1,9mm Application: for grinding steps on step drills Accessories:

 Paper belt filter make LKK Foreground flap collet chuck Forkardt Overz /BR 50/ LH-Z 24394

Condition: excellent (used), Year of construction: 2008, Voortman V613 / VB750 CNC Drilling / Sawing Line – Year 2008 Gbodpsv U Ebwefx Afiju Rotating Spindle. 19 metres In-Feed. 12.5 metres Out-Feed. Roller Feed. In-Feed Cross Transfers. Out-Feed Cross Transfers. 750mm Section Capacity.

Condition: excellent (used), We are a Polish manufacturer and distributor of industrial drilling machines created for the furniture industry, but not only. We specialize in through-hole drilling machines, CNC drilling machines, and automation of the drilling process. We also manufacture machines and customized drilling heads. Expert Pro CNC 65 G machine is a symbiosis of computerized aggregate basing with manual positioning of heads. This solution is dedicated to large-scale production for plants expecting, on the one hand, quick setting of the machine for a given component and, on the other hand, drilling efficiency. Thanks to the rational combination of human and machine work, it is possible to achieve a measurable effect in the form of performance at the level of about 20 elements per minute with a changeover time of less than 10 minutes for a trained operator, depending on the complexity of the element. MAIN FEATURES - Used for mass production, even with frequent changes in drilling parameters. - The machine can be integrated with auxiliary lines. - Feeding of vertical unit axes is carried out by servo motors. TECHNICAL SPECIFICATIONS: Panel length: 250 - 2550 mm Panel width: 450 - 1150 mm Panel thickness: 12 - 50 mm Capacity: Approximately 20 el/min Number of bottom drilling units: 6 Number of upper drilling units: 5 Gbodpfx Ajqfc R Tsfisu Number of horizontal drilling units: 1 x left, 1 x right Used machine - 1 year old THE POSSIBILITY OF EXCLUSION OF OPERATORS - ROBOTIZATION OF THE DRILLING MACHINE AS IN THE ATTACHED VIDEO

Condition: ready for operation (used), empty load weight: 6,000 kg, total width: 2,350 mm, total height: 2,450 mm, Type: FCN 540 gundrilling, high precision deep hole drilling Gbedpfx Afjxgv I Isisu movement of drillinghead: 0 600 mm movement of table (X-movement): 0 800 mm max drillingdepth: 800 mm Y-travel: 600 mm Z-travel: 450 mm table: 1100 x 600 mm Heidenhain control including Filtra high pressure cooling through spindle including tools total power: 16 kW Max drilling dia: 4-20 mm Speed: 0 > 12 000 rpm Power on drillingspindle: 3,7 kW Total length: 3800 mm Numbre of drillingheads: 1x

Condition: ready for operation (used), Year of construction: 2018, A CNC drilling and tapping center Fanuc is available. Travel X/Y/Z: 700mm/400mm/330mm, spindle-to-table distance: 250mm-580mm, axes: 5, table dimensions X/Y: 850mm/410mm, max. table load: 300kg, spindle taper: BT30, speed: 24000rpm, power: 26kW, torque: 35Nm, rapid traverse: 54m/min, feed rate: 30m/min, tool positions: 21, max. tool diameter: 80mm, max. tool length: 250mm, positioning accuracy: +/-0.006mm, repeatability: +/-0.004mm. Machine dimensions X/Y/Z: approx. 2200mm/2100mm/2300mm, weight: approx. 2100kg, control: Fanuc, operating hours: 25320h. Including coolant tank MCO with band filtration system and scraper conveyor, M&H 3D probe, Fanuc zero-point option, and spare spindle. Documentation available. An on-site inspection is possible. Expected to be available starting December 2026. Gbjdpfxexlitzo Afiju

Condition: excellent (used), Year of construction: 2016, Schraml Topdrill M-RX 130 Vertical cnc glas milling and drilling centre Processing: Max. Glas-Length: 3.200 mm Max. Glas-height: 1.300 mm Min. Glas-length: 600 mm Min. Glas-height: 130 mm Thickness: 4-20 mm Gbjdswzkm Rspfx Afiou Options: - 2x Elektrospindle 5,5 kW 0-12.000 U/Min - Tool Magazin with 2x 8 slots - CAD/CAM - central lubrification

Condition: ready for operation (used), Year of construction: 2018, A fully automated Fanuc machining center is available. Travel X/Y/Z: 500mm/400mm/330mm, rapid traverse: 54m/min, max. load capacity: 300kg, spindle taper: MAS BT30, max. spindle speed: 24000rpm, robot type: Fanuc LR-Mate 200iD, max. pallet weight: 5kg. Machine dimensions X/Y/Z: approx. 4000mm/2800mm/2800mm, weight: approx. 3500kg, control: Fanuc Series 31-iB5, operating hours: 29732h. Including Knoll KF200/950, Knoll 300 K-1, probe, Renishaw laser tool measurement, and chip conveyor. Documentation available. An on-site inspection is possible. Gjdpexghnysfx Afiobu

Condition: excellent (used), Year of construction: 2016, Schraml Topdrill M-RX 130 Vertical cnc glas milling and drilling centre Gbsdpfsw Skzhsx Afiju Processing: Max. Glas-Length: 3.200 mm Max. Glas-height: 1.300 mm Min. Glas-length: 600 mm Min. Glas-height: 130 mm Thickness: 4-20 mm Options: - 2x Elektrospindle 5,5 kW 0-12.000 U/Min - Tool Magazin with 2x 8 slots - CAD/CAM - central lubrification

Condition: ready for operation (used), Travel X/Y/Z: 500mm/380mm/300mm, table dimensions X/Y: 650mm/380mm, speed: 8000rpm, spindle taper: BT30, tool positions: 14, spindle power: 7.5PS, max. table load: 200kg. Dimensions X/Y/Z: approx. 1600mm/1900mm/2300mm, weight: approx. 2000kg, control: Fanuc Series 16i-M. Defects: Range switch of the tool changer and relay of the Z-axis brake. Gedjtyynmjpfx Afisbu

Condition: excellent (used), For sale: Professional clamping chuck from the renowned brand HOLEX – a robust and reliable solution for CNC machining centers. Gbedpjw S Iw Hsfx Afisu • Type: SK40-2/20-100 • Clamping system: ER32 (interchangeable collets) • Length: 100 mm • Maximum torque: 170 Nm • Spindle speed: up to 12,000 rpm • High-quality construction – precise clamping of shank tools • Condition: used, in very good technical condition Ideal for securing drills, milling cutters, taps, and other shank tools. The HOLEX brand is a line from the German Hoffmann Group, ensuring quality and durability at a reasonable price.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: 4191326, Vortman 630/100M+ saw Meba 510 Gsdpfx Afsuy Rmaeiebu

Condition: ready for operation (used), For sale is the Weyrach CNC drilling center with a Siemens Sinumerik 805 control system. The machine is in working order. The machine has been inspected and tested for functionality (see service report). Drive and control components are available upon request from Allemdninger and can also be repaired and replaced if necessary. Weight approx. 5-6 tons Machining area approx. 800 x 5000 mm Machine dimensions: approx. 6500 x 1400 x 2500 mm Sold without warranty, ex works, duty unpaid. Gbedpfx Ajuphy Iefieu SPECIAL PRICE €5,550 plus VAT

Condition: used, Year of construction: 2007, with 3 drilling stations, workpiece dimensions: length: 18.5-120 cm, width: 9-70 cm, thickness: 1.2-3.2 cm, with loading station PBA-22-CNC, serial no.: 1823, unloading station PBA-22-CNC, serial no.: 1825, vacuum lifter, roller conveyor, safety enclosure Gjdpfx Ajxnadisfisbu