Used Banding Machine for sale (64,748)

Condition: good (used), Banding machine TP-601 D1 The machine is operational, ready for production. Producer: M.J Maillis Sander Simple controls. Dkjdpfxew D E Ris Ac Nsh An indispensable device on expeditions, for packing heavy parcels, e.g. with leaflets or catalogues. A strip of PP tape strengthens the packaging and additionally creates a handle that allows us to easily grab and transport the package. Adjustable tension force. Goal size 850x600mm Strap width 10mm Power supply 230V Weight 200kg

Condition: excellent (used), Year of construction: 1993, max. edge thickness coils 0.2 - 3 mm max. edge thickness solid strips15 mm Dsdpfx Acefbr S Re Nskh feed speed 12/ 18 m/min glue plot heating time approx. 6 min autom. strip magazine coil magazine granulate heating pot flush trimming unit radius trimming unit operating panel extendable work piece support noice cancelation hood machine length 3800 mm Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), Year of construction: 2002, edge seize 0,2 - 12 mm work piece dimension width min. 70 mm height min. / max. 8 / 42 mm length min 160 mm (strips) length min 60 mm from roll Durchlaufgeschwindigkeit: 12 m/ min glue coating with roller working height : 880 mm compressed air 6 bar,1/4 Zoll Dsdpjhy Tlrefx Ac Nokh suction connection, DM 160 mm dimensions: L x W x H = 5600 x 950 x 1300 mm weight: ca. 2200 kg total conection: ca. 11,5 kW, 400 V, 50 Hz machine equipped with: - double top roll pressure with electric height adjustment - autom. roll magazine for rolls up to 800 mm DM, pneumatic cutting up to 3 mm - autom. infeed fence - no adjustment of edge seize premilling aggregate with 2 HF-motors 1,5 kW, 12000 n double end trim unit - 2 HF-motors 0,2 kW, 12.000 n 2 autom. positions = 0 + 3 deg. flush trimming aggregate with 2 HF-motors 0,7 kW, 12.000 n radius trimming unit - with2 HF-motors 0, 3 kW, 12.000 n, radius scraping unit, autom. set in flat scraping unit Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, The model ME 40TR is SCM’s ‘bestseller and in this category offering unrivaled price / performance ratio. We can offer the following new machine SCM me 40tr, CE Volt 400 EU, frequency 50 Hz Djdjc S Di Ropfx Ac Njkh edge thickness coils 0,4 - 3 mm max. edge thickness strips 5 mm min. – max. work piece thickness 8 - 50 mm feed speed 9 m/ min glue pot unit 0,18 kW, capacity 0,8 kg premiling aggregate 2,2 kW, 9000 U/ min end-cutting unit with "Radius" allows you to make a radius on the corners of the edged panel trimming unit 2 x 0,35 kW, 12.000 U/ min OPTIONAL device for panel preheating edge scraping unit flat scraping unit grooving unit 1,1 kW, 12.000 U/ min, notch width 4 mm brushing unit with 2 independent motors magazine for strip edges kid for quick exchange of glue unit ...

Condition: used, Year of construction: 1985, edge thickness 0,4 - 12 mm work piece thickness 10 - 55 mm work piece length min 160 mm work piece width min 65 mm feed speed 13 m/ min compressed air 7 bar machine length 5420 mm weight 1950 kg glue pot with quick melt system glue application roller wit left and right turning edge magazine for PVC and strips motor height adjustment for pressure beam pneumatic pressure rollers for edge magazine control panel, rotatable all aggregates in-line controlled cutting milling combination with 2 aggregates, 1st aggregate straight, 2nd aggregate radius and phase milling tool draw blade buffing unit central lubrication for transport chain quick change system edge control system with error msg IR heater CE Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. Dsdpfxoc Tmyge Ac Nokh (We answer your inquiries only with stated address + telephone number!)

Condition: new, Hebrock Model F 2 next Offer type: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine with special offer price and full manufacturer warranty. The 3.3 m long F 2 is not only inexpensive and space-saving. It also has the equipment you need to process perfect edges right from the start: diamond-tipped jointing cutters guarantee excellently prepared workpieces for edging. The equipment includes a jointing unit (up to 2 mm milling depth), the top-mounted fast heating glue container, cross-cut saw and combination router. Optionally, the F 2 can also be equipped with a surface scraper. max. edge thickness: 3 mm max. workpiece thickness: 50 mm Ready for operation in 3.5 min Feed rate approx. 10 m/min Dkodpfxjl D Rp Ee Ac Neh Equipment: Edge banding machine F2 next With PLC control (incl. touch screen) Hot melt glue application to the workpiece for edgebanding material up to 3 mm jointing cutter (incl. slide - tool) up to 2 mm milling depth maintenance-free glue basin with change basin pre-equipment incl. glue discharge device HF crosscut saw station (approx. 12000 rpm) HF milling station (approx. 12000 rpm) with separate pneumatic milling adjustment and interchangeable plate milling cutter (combination version) robust chain drive ball bearing mounted double roller top pressure viewing window from rear side of machine extractable workpiece support Including special equipment: F2/12 surface scraper (incl. pneum. lift) F2/30 pneumatic 3-point adjustment (radius- ,chamfer-, flush milling) F2/27 Nesting for milling stations

Condition: excellent (used), Year of construction: 2007, Edge thickness 0.2 - 12 mm Workpiece thickness 8 - 52 mm Workpiece width min. 70 mm Workpiece length min. 150 mm Automatic edge magazine milling unit 2 x 1.5 kW, application-controlled Cut-off unit 2 x 0.3 kW Flush trimming unit 2 x 0.7 kW, scanning on one side Fine trimming unit 2 x 0.35 kW, tiltable 15/ 30/ 45 degrees Fine trimming unit 2 x 0.3 kW, R=2, scanning on both sides Dkedolc Ewispfx Ac Nsh Corner copying unit 2 x 0.3 kW Scraper unit, autom. in/ out Flat scraper unit Buffing unit 2 x 0.2 kW, oscillating 5 x spray device (2 x release agent, 1 x lubricant, 2 x cleaning agent) Color touch screen control OTT C3 Motorized height adjustment Feed 10 - 14 m/min COMBI MELT gluing part for EVA/ PUR, volume 1.5 l CE mark Total connection 12.6 kW Dimensions L x W x H approx. = 6120 x 840 x 1500 mm Weight approx. 2,900 kg

Condition: used, Year of construction: 2010, Used machine Year of manufacture 2010 With joining unit and corner rounding unit Control panel with LCD display and keypad Joining unit with 2 counter-rotating diamond cutters With edge feeder for roll and strip material With glue roller and glue unit With pre-trimming from the roll With pressure unit With trimming unit with pulling trimming cut With flush and radius trimming unit Corner rounding unit for front edges Manual unit adjustment Edge thickness 0.4-5 mm Workpiece height 8-60 mm Min. workpiece width 70 mm Min. workpiece length 140 mm Feed speed 11 m/min With radius scraper unit With flat scraper Dkedpfxow I H Rks Ac Njh With polishing unit Extendable workpiece support Extraction connection 120 + 2 x 80 mm Weight approx. 990 kg L x W x H 4550 x 1550 x 1100 mm Availability: Short-term Storage location: Flörsheim

Condition: new, CATALOG NUMBER HL001 - New machine, in stock – Pre-milling unit – Radial scraper + polishers TECHNICAL DATA - Panel thickness: 45mm - Edge thickness: 0.4 mm – 3 mm - Min panel width: 90mm - Min panel length: 90mm - Feed speed: 7m/min - Pre-milling: 9000 rpm - Top/bottom: 10500 rpm - Front/back: 8800 rpm - Polishing: 2800 rpm - Main motor: 6kW Djdpfeyg Ecvox Ac Nekh - Feed power: 0.75kW - Pre-milling power: 1.5kW - Glue spindle power: 0.25kW - Top-bottom milling power: 0.18kW - Top milling power: 0.55kW - Top polishing motor: 3-phase 0.12 kW, 1-phase 0.18 kW - Bottom polishing motor: 3-phase 0.12 kW, 1-phase 0.18 kW - Working table height: 856mm, extended support width: 560mm - Extraction connection: 3x100mm - Dimensions (L/W/H): 3200/1200/1200mm, weight: 660kg Net price: 49,900 PLN Net price: 11,880 EUR based on 4.2 EUR exchange rate (Prices may change with significant fluctuations)

Condition: ready for operation (used), total height: 3,340 mm, total length: 4,500 mm, total width: 1,950 mm, throat depth: 660 mm, Type: ONL 660x700 ACN Heavy duty double column bandsaw specific for high-alloy steels CNC touch control with saw parameters for various types of high-alloy steels cap round: dia 660 mm cap square: 660 x 700 mm bundle cap: 555 x 700 mm autofeed with stroke of 500 mm (with unlimited repositioning) Dksdpfxjygywus Ac Njh sawing power: 18,5 kW the in-feed and sawing speeds are frecquency controlled enlarged height of sawblade: 67 mm chipconveyor equipped with fully motorized Weisshaupt rollerconveyors: - 10,3 meter in-feed rollerconveyor (outside) with 2 hydraulic clamps for aligning workpiece - 9 meter in-feed rollerconveyor (inside) with 2 hydraulic clamps for aligning workpiece - max workpiece width: 900 mm - each roll is motorized - cap of one roll is 4 ton - 4 meter out-feed rollerconveyor: one rollerconveyor is equipped with scales to weigh workpiece after cutting (Sartorius system) Max height of workpiece: 700 mm Sawspeed: 10 > 120 m/min Length of band saw: 8660 x 67 x 1,6 mm Power needed: 27 kW (58 amp) Weight: 8,5 ton (only machine)

Condition: ready for operation (used), Buispolijstmachine Voor buizen tot diameter 200 mm Dksdpfoygywbsx Ac Neh

Condition: used, Head & Tail Banding Machine with Gauzing Station Kolbus HL Year 1970 Format / Size min. 125 x 100 x 6mm / max. 370 x 270 x 80mm Leistung / Speed up to 36 cycles/min. Bestehend aus / Consist of: 1) Anleimstation / Gluing Station 2) Kapitalband- und Hinterklebestation / Head and tail banding station 3) Andruckstation / Pressure station Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Dkedpfxsv Ay Are Ac Neh On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 2004, machine/vehicle number: 15005225, Automatischer Banderolierautomat - Automatic Banding Machine HIMA BA 30/800Baujahr / Year 10/2004 - Serial-No. 15005.225 Dedpfx Aen Aw Ucoc Nskh Beschichtetes Kraftpapier bzw. Kunststoff-Folie Coated paper or plastic filmTechnical specifications: Leistung / Output: up to 23 Takte/min / cycles/min. Produktbreite / Width of banded product: 30 - 310mm Produkthöhe /Stack height: 3 - 200mm Bandbreite / band width 30mmTaktauslösung /Triggering of cycle: – von Hand/Starttaster / manual/start button – über Fußschalter / foot actuator – über Automatiktaster / automatic mode button Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, EDGE BANDING MACHINE LINE STEFANI EVOLUTION SB LINE Dksdjw R Tilopfx Ac Neh Year of Production: 2016 Condition: Very good Description: See PDF documentation Additional Service: Installation and commissioning of the machine can be provided for an extra fee.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, STREAM SB LINE (WINNER W1 + STREAM C SB1/SB2 + SP30 + TURNER) Year of production: 2021 Technical condition: very good Panels: chipboard, MDF, HDF, plywood, joinery, solid wood Coatings: ABS / PVC / laminate / veneer / lacquer / melamine Shape: rectangular, without grooves or holes Roughness: average < 5 µm, maximum < 35 µm Working temperature of components: < 50 °C Minimum density: chipboard > 650 kg/m³, MDF > 750 kg/m³ FEEDER / STACKER WINNER W1 Panel length: min. 300 mm Panel width: min. 240 mm (double row: min. 120+120 mm), max. 1200 mm (double row: max. 600+600 mm) Panel thickness: 10–60 mm Panel weight: up to 100 kg Panel flatness: ±1 mm/m (max. ±2 mm over the entire length) Height of uniform stack on the conveyor (H=250 mm): min. 300 mm, max. 1500 mm High-speed unit speeds: Y-axis (carriage) 210 m/min, Z-axis (suction frame) 130 m/min (+ productivity ~2 cycles/min) Base productivity: 15 cycles/min (depending on composition/weight/gaps) Compressed air consumption: 950 Nl/min Installed power: 16 kW Option: powered panel separator – air 1050 Nl/min, power 8 kW DOUBLE-SIDED EDGE BANDING MACHINES STREAM C SB1 (first pass) Panel overhang beyond the conveyor: 35 mm Panel thickness: 10–60 mm Edge thickness: 0.3–3 mm Edge height: 15–65 mm Table height: 950 mm Panel width: 240–1200 mm (SB1 TWIN: min 100 mm; SB1 SOFT: min 270 mm) SOFT profile depth at 50 mm overhang: 20 mm (greater depth requires adjustment of overhang/additional equipment) STREAM C SB2 (second pass) Panel overhang beyond the conveyor (fixed): 35 mm (SB2 SOFT: 50 mm) Panel thickness: 10–60 mm Edge thickness: 0.3–3 mm Edge height: 15–65 mm Table height: 950 mm Clamp spacing: 500 mm Panel width: 240–1200 mm (SB2 SOFT: min 270 mm) Panel length: 240–2700 mm SOFT profile depth at 50 mm overhang: 20 mm (greater depth requires adjustment of overhang/additional tables) Dksdpjw R Savjfx Ac Neh GLUING UNIT SP30 Edge thickness: 0.3–3 mm Maximum cutting section of scissors: 135 mm² (3 × 45) Panel thickness: 10–60 mm Edge height: 15–65 mm Minimum edge length: 250 mm Glue tank: 1.3 kg Glue reservoir: 11 kg Application capacity: 16 kg/h Edge roll diameter: 800 mm EDGE CUTTING LENGTH CONTROL (options) EC40: minimum length 200 mm, speed 40 m/min, tolerance ±3 mm EC60: minimum length 200 mm, speed 60 m/min, tolerance ±5 mm TURNER ROTARY UNITS PT1 / PT2 Panel length: 300–3200 mm Panel width: 200–1200 mm Panel thickness: 10–80 mm Maximum panel weight: 100 kg Panel flatness tolerance: 1 mm/m Floor flatness tolerance (area 8000 × 3000 mm): ±10 mm Compressed air requirement: 250 L/min Installed power: 7 kW Installation and commissioning are available for an additional fee.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Double-sided edgebander Stefani Evolution C Year of production: 2012 Technical condition: very good Dedpfx Aou U N Agjc Nekh The Stefani Evolution C is designed for precise edging of straight and profiled edges of furniture panels made from various materials such as particle board, MDF, or plywood. Thanks to its advanced functions and high-quality construction, this machine ensures excellent results in the production of office, kitchen, and bathroom furniture as well as other interior furnishing components. Working width max: 3200 mm Working width min: 225 mm PC control Software: Stefani Winedge Plus v06.14.000 Longitudinal processing Cross processing

Condition: ready for operation (used), Year of construction: 1980, Band saw machine Make KÖLLE Type:ST 105 Year 1980 overhang 1050 mm Dsdpsmp Trwefx Ac Nekh with saw band - welding device IDEAL . Infinitely variable speeds. Machine ready for use condition.

Condition: good (used), Year of construction: 1992, Automatic band saw JAESPA Type:W400 AZ Control Minipos 807 year 1992 Cutting diameter round material max. 400mm Sägebandlänge:5500X32X1,1mm Feed automatic cut length min.20mm Chip conveyor Dkjdpfx Aogf H Saoc Neh Total power requirement 4 Kw Weight approx.2500kg Accessories 2X saw blades, roller table 6m motor drive, machine documentation available. Footprint : 2,8X2,8X2m

Condition: used, Year of construction: 2016, Industrial automatic edge bander SOLUTION XD MAIN FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: ONE "TOUCH" IS ENOUGH TO OPERATE THE MACHINE. STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE. BANDING OF ROLLED MATERIAL, STRIPED EDGES, AND SOLID WOOD EDGES. GENERAL FEATURES: Single-sided edge bander in left-hand design for gluing rolled materials and strip edges using all conventional hot melt adhesives. The base frame consists of a sturdy, highly rigid steel welded stand, which provides optimal support for the processing units. The upper pressure consists of a thick-walled steel profile and a double trapezoidal drive belt that is automatically positioned to the panel thickness. Height adjustment with display on the top pressure and on the operator interface. Manual workpiece feeding system with a generously dimensioned work line and enlarged support surface facilitates the feeding of large workpieces. Adjustable infeed ruler for two positions with automatic selection for processing with or without pre-milling. Working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal beam for precise reference in relation to the panel. All high-frequency motors are powered by frequency converters (inverters). The unit is equipped with its own inverter for optimal flexibility and improved production times. The cleaning hood for all units positioned after the gluing unit is equipped with polycarbonate windows to ensure a good overview of the units during processing. The interior lighting of the cleaning hood is lined with sound-absorbing material for lower noise emissions during processing. The spacers on the infeed ruler allow the machine to be fed at the correct distance. The distance is automatically adjusted to the selected feed speed. The exhaust nozzles are arranged on the pivoting control panel, positioned in the infeed area, and are adjustable for ergonomic electrical installation in compliance with current regulations. The electrical component is housed in a metal casing, fixed to the machine frame and equipped with doors for easy access in case of any problems. The standard voltage is 400 V EU 50 Hz (with neutral). The material is fed by a feed chain with 80 mm wide chain plates made of rubberized nylon for optimal guidance and a high chain tension. The chain slides on two guides made of hardened and ground steel, one round and one flat, to ensure linear feed and prevent lateral misalignment. Automatic chain lubrication. The amount of lubricating oil is controlled by the control system according to the panels being processed. The storage roller conveyor is external and positioned along the entire length of the machine; it consists of an opening system that can be extended up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCHPC control system for quick and easy execution of the main functions which includes:– Editing of programs in Just in Time mode– Possibility of management via parts lists– Possibility of management by Dedpfsxy Tm Ijx Ac Nekh

Condition: like new (used), Year of construction: 2023, Edgebanding Machine SCM Model: olympic 500 HP 'T-ER2' Type of Offer: Lease return, used machine Availability: Immediate Location: In stock Condition: As new Year of Manufacture: 2023 Dkodeq A Tyzjpfx Ac Neh GENERAL DESCRIPTION: A complete and versatile edgebanding machine for small and medium-sized companies, capable of processing a wide range of materials to a high standard of quality in a compact footprint. The SCM Olympic 500 features an electronic setting device and allows processing of 2 radii, each with its own tooling, for workpieces with a minimum width of 60 mm. HIGHLIGHTS: • Large touchscreen control panel with 'Maestro active edge' HMI software • Maestro connect: prepared for later installation without gateway • 2-radius processing, chamfering on all units with multi-edge tooling - Fine trimming and radius scraper unit, radius = 1 mm - Fine trimming and radius scraper unit, radius = 2 mm • Electronic positioning of the pressure beam OPTIONAL MACHINE EQUIPMENT: Workpiece spacer at infeed KIT "SAV€NERGY" Internal lighting for the enclosure and gluing area “Nesting” sensor roller kit Release agent spray unit “AAR” Edge finishing spray unit Spray unit for sensitive edges Jointing cutter unit "RT-V1" “EASY SIZE” device – electronic quick adjustment of the jointing cutter unit Glue unit "VC-VM" SGP glue pot for EVA & PU incl. quick-change system Ceramic infrared preheating lamp for workpieces Electronic positioning of all pressure rollers End trimming unit "K-2 Radius" Chamfer and radius milling unit "R-HP Multiedge 2R" Corner rounding unit "Round 2-A Multiedge 1R" KIT 'MULTIEDGE 3' – automatic position change straight/ R/R, for "Round 2-A Multiedge 1R" unit Radius scraper unit "RAS-HP Multiedge 2R" Flat scraper unit "RC-N" Buffing unit "SP-V" MACHINE LANGUAGE: German TECHNICAL DATA: Edge thickness: 0.4–6 mm Workpiece thickness: 8–60 mm Min. workpiece width: 60 mm Feed speed: 12 m/min Machine length: approx. 4950 mm SPECIAL PRICE – LEASE RETURN!!

Condition: good (used), Alber sharpening machine for band saw blades saw blade width 50 - 206mm Djdpfx Ajglui Ajc Nskh tooth pitch 20 - 50mm

Condition: excellent (used), Fully automatic band saw graderOppligerType PBS 860 Djdpfxed Sr Sis Ac Njkh

Condition: used, Year of construction: 2018, Edge banding machine AKV 3006 DK - F with jointing milling unit including DIA - tools Jointing thickness up to 40 mm Workpiece thickness up to 3 mm Combined milling station radius R 2.5 mm Technical description With application of hot glue to the workpiece for edge material up to 3 mm Workpiece thickness 60 mm without jointing unit, 40 mm with jointing unit Maintenance-free, coated glue pot HF - cross-cut station (16,000 rpm) for front and rear edge overhang HF - milling station (16,000 rpm) with interchangeable cutter (combination version) and fine adjustment from the operator side Free slots for additional processing units (system Hebrock), feed approx. 10 m/min Cutting depth adjustment of the cross-cut saw Signal lamp for workpiece sequence, robust chain drive, ergonomically arranged control panel Double-roller top pressure beam Aggregate viewing window from machine rear and operator side PLC control including touchscreen Technical data: - Feed speed 10 m/min - Panel thickness 8 - 40 mm - Weight: depending on equipment approx. 1550 kg - Dimensions (L x W x H) 5250 x 1445 x 1600 mm 2-point pneumatic cutter adjustment 1 unit Switching between radius - flush/bevel for the combined milling stations, switching between bevel or flush is manual by flipping the stop flap in the machine Buffing station (polishing) 1 unit Corner rounding cutter 1 unit incl. combination tool and pneumatic bevel/radius adjustment, max workpiece thickness 40 mm Minimum workpiece length 300 mm Radius R 2.0 mm Radius scraper 1 unit incl. pneumatic lift device, radius R 2.0 mm Surface scraper 1 unit with pneumatic engagement control Glue station change system incl. 2nd glue pot and glue outlet downwards 1 unit for quick color change Grooving saw unit horizontal into the edge 1 unit incl. pneumatic lift device and grooving tool Separate extraction of jointing unit 1 unit directly attached to jointing unit vertically upwards d=80mm for optimal suction performance from AKV 3005 DK-F urgently recommended Ball bearing for corner rounding cutter 24.1mm 1 unit Ball bearing for corner rounding cutter 24.2mm 1 unit Interchangeable motor 0.37 kW for corner rounding cutter 1 unit with quick-change device incl. radius cutter R 1 Interchangeable spindles 1 set = 2 pieces 1 unit 1 set of quick-change motors for longitudinal processing top and bottom incl. tool R 1 Djdsxfh Tmspfx Ac Nekh Compressed air requirement: 100 - 150 l/hour. Storage location: Nattheim

Condition: new, Year of construction: 2026, saw band length: 4,650 mm, saw band width: 1 mm, total height: 34 mm, total length: 2,350 mm, total width: 1,250 mm, type of input current: three-phase, cutting range round steel at 90°: 400 mm, table height: 600 mm, overall weight: 1,250 kg, input voltage: 400 V, coolant pump power: 60 W, cutting range square steel at 90°: 400 mm, power: 4 kW (5.44 HP), ROGI SAWING MACHINE TYPE WDS-400 SEMI-AUTOMATIC Saw blade size ----- 4650 x 34 x 1.1 mm Sawing speeds ----- 19/30/50/65/90 m/min. Motor power ----- 4 kW - 400V - 3 phase Weight ----- 1250 kg Cutting capacity ----- 400 mm / 500W x 400H mm INCLUDES Bimetal band saw blade Workpiece stop Saw blade guide with carbide inserts Hydraulic clamp Coolant pump Hydraulic downfeed cylinder Motor protection switch Automatic end stop Dedpfox N Iawjx Ac Njkh

Condition: ready for operation (used), total height: 3,020 mm, total length: 3,300 mm, total width: 5,100 mm, throat depth: 1,060 mm, zware dubbelkoloms lintzaag voor het zagen van hooggelegeerde staalsoorten automatische invoer van het werkstuk met automatische herpositionering CNC-gestuurde variabele snelheid voor invoer en zagen spaantransportband uitgerust met volledig gemotoriseerde Weisshaupt-rollenbanen: - 10,3 meter invoerrollenbaan (buiten) met 2 hydraulische klemmen voor de contouren van het werkstuk - 9 meter invoerrollenbaan (binnen) met 2 hydraulische klemmen voor de uitlijnen van het werkstuk - Maximale werkstukbreedte: 900 mm - elke rol is gemotoriseerd - de capaciteit van één rollenbaan is 4 ton - 4 meter uitvoerrollenbaan: één rollenbaan is uitgerust met een weegschaal om het werkstuk na het snijden te wegen (Sartorius-systeem) Dkodev Sfp Aepfx Ac Neh Max height of workpiece: 860 mm Sawspeed: 16 > 80 m/min Length of band saw: 10260 x 80 x 1,60 mm Power needed: 32 kW (100 amp) Weight: 9 ton (only machine)