Used horizontal band saws - automatic - cutting range 300-359mm for sale (89)

Condition: new, cutting diameter 300 mm saw band length 3320 x 27 x 0,9 mm mm cutting width 300 mm Control NC capacity 90 degrees: flat 330x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: square 250 mm capacity 45 degrees: flat 270 x 200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: square 170 mm band speed 15 - 100 m/min total power requirement 2,2 kW weight of the machine ca. 1,1 t dimensions of the machine ca. 3,3 x 2,83 x 2,23 m Furnishing: - fully automatic electro-hydraulic band saw with additional semi-automatic, semi-automatic-dynamic and manual operation - Automatic cycle (cuts from 0° to 60° left) - Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from 45° right to 60° left) - Manual or semi-automatic dynamic cycle to make cuts outside of series production can be carried out directly without programming. - Numerically controlled band saw machines with the new, especially from MEP Windows CE based controller developed for automatic machines. - User interface with touch screen display of 7 and mechanical buttons for the operating functions of the sawing machine. - Stepless regulation of the cutting speed from 15 to 100 m/min Frequency converter (inverter). Iisdpfofg E H Eox Ag Isb - Material feed with stepper motor via ball screw - which is mounted on opposite ball bearings; Single stroke 600 mm - repeatable to cut to any length. - Automatic monitoring of cutting load - through a servo valve mounted directly on the cylinder. - The coolant pan is installed in the base frame - Chip clearing brush. - Bimetal saw band for solid and profile material. - Tools and instructions for use with a list of spare parts

Condition: good (used), Thread Cutting Machine Berg + Schmid Delta 4 Iiedpfxsyy S Efs Ag Ijb Product Description Cutting range: R 1/3 - 4", M8-M52 Powerful capacitor motor 230V-1 kW, exceptionally quiet operation 3 speeds: 15+27+58 rpm (also under full load, built-in gearbox) With 2 automatic thread cutting heads: R 1/2 -2", R 2 1/2 - 4" Complete with cutting dies: R 1/2 - 3/4", R1"-2", R 2 1/2 - 4", conical DIN 2999 Automatic cooling directly through the cutting head Quick-release chuck, pipe cutter, internal pipe reamer Includes occupational safety equipment with safety foot switch and 4 support legs

Condition: good (used), Year of construction: 2007, machine/vehicle number: 609086, Offer 26074 Hydraulically-operated, double-column-guided horizontal band saw automatic machine Technical data: - Cutting capacity at 90° round: 260 mm - Cutting capacity flat: 260 x 260 mm - Maximum single stroke of material feed: 600 mm - Maximum cut length in multiple strokes: mm (not specified) - Saw band dimensions approx.: 4100 x 32 x 1.2 mm - Infinitely variable cutting speed: 12 - 100 m/min - Infinitely adjustable cutting pressure: 0 - 10 m/min - Hydraulic material clamping with adjustable clamping pressure - Coolant system - Chip conveyor - Total drive power: 400 V / 8.5 kW - Required space approx.: W 2350 x H max. 2340 x D 3050 mm - Weight approx.: 1900 kg - Infeed roller conveyor: 1500 mm Isdjyn Ikropfx Ag Ijib

Condition: ready for operation (used), Year of construction: 1998, cutting diameter 305 mm capacity 90 degrees: flat 350 x 200 mm capacity 45 degrees: round 250 mm capacity 45 degrees: flat 230 x 200 mm capacity 60 degrees: round 175 mm capacity 60 degrees: flat 170 x 100 mm cutting speed 18 - 110 m/min vice max. 350 mm dimensions of saw-band 3370 x 27 x 0.9 mm engine output 1.5 / 1.8 kW weight of the machine ca. 880 kg range L-W-H 1700 x 2200 x 2000 mm Equipment: - robust, electro-hydraulic fully automatic band saw - user-friendly controls - Mitre cuts left to 45 . possible in automatic mode - Mitre cuts up to 60° . only possible in semi-automatic mode - Hydraulic power unit with automatic . pressure cut-off when idling - Stationary base frame Ijdsyy A Hyjpfx Ag Ieib * with large chip drawer and automatic cooling system - infinitely variable saw blade speed adjustment (ESC) - rotating chip brush - remnant min. 80 mm - operating instructions (PDF)

Condition: used, Year of construction: 1999, functionality: fully functional, power: 9 kW (12.24 HP), input current: 25 A, type of input current: three-phase, cutting height (max.): 360 mm, control type: CNC control, total height: 2,200 mm, total length: 2,500 mm, total width: 3,100 mm, overall weight: 3,000 kg, Equipment: CE marking, documentation/manual, We are offering this used Behringer HBP 360 A-CNG bandsaw, year of manufacture 1999. Manufacturer: Behringer Model: HBP 360 A-CNG Year: 1999 Condition: used - Bundle clamping device - Automatic job sequence - Cutting line laser LAP Type HD Iisdpfx Aoy Axfwjg Iob - Chip conveyor - Coolant system - Minimum quantity lubrication - Chip brush Technical details: Saw blade length: 5400x41x1.3 mm Control: Behringer Circuit protection: 25A Total power requirement: 9 kW Minimum cut length: 10 mm Cutting speed: 19-130 m/min Machine weight: approx. 3000 kg Space required (LxWxH): 2.5 x 3.1 x 2.2 m The machine is still in use and can be inspected by arrangement. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: new, Bernardo fully automatic double column bandsaw BSM 330 NC Pro Technical specifications Cutting range round: 90° 330 mm Cutting range flat: 90° 330 x 330 mm Cutting range square: 90° 330 x 330 mm Working height: 635 mm Cutting speeds: (NC PRO) 20 - 80 m/min Saw blade dimensions: 4115 x 34 x 1.1 mm Coolant pump: 0.135 kW Iiodpfx Asqzhxisg Ijb Hydraulic pump motor power: 0.75 kW Motor power: 4.0 kW Machine dimensions: (LxDxH) 2520 x 2280 x 1630 ( depth: 3690 with feed roller conveyor) Weight approx.: 1990 kg Scope of delivery: - Saw band - Hydraulic vice, - Pressure gauge for band tensioning - Hydraulic saw band tensioner, - Hydraulic workpiece feed - Hydraulic workpiece feed, - Chip conveyor (NC Pro) - Coolant device, - Hydraulic lowering cylinder - Work light, - Delta frequency inverter (NC Pro) - Delta frequency inverter (NC Pro,) - Motor protection switch - Motor protection switch - Automatic limit switch - Cutting pressure regulation - PLC control Delta - Automatic belt breakage control - Hydraulic bundle tensioning device - Feed roller conveyors

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Used Beka mak BMSO 320 GLH Fully automatic band saw Year 2009 Iijdpsyrmrpsfx Ag Ieb Angle cutting also possible

Condition: used, Year of construction: 2021, CNC Saw Brand: SOITAAB (FRIGGI) Model: SF300 CN Type: Automatic Structure: Double column cylinders Round cutting capacity: up to 300mm Saw blade speed variation Ethernet interface (Industry 4.0) Iiedpfx Ajyhrb Isg Iob

Condition: used, Year of construction: 1989, functionality: fully functional, Kasto HBA 360 AU bandsaw incl. roller conveyor Cutting range: 360 mm Saw blade dimensions: 5334 x 32 mm Length: 2310 mm Width: 2600 mm Height: 1700 mm Weight: 2600 kg Iedpfx Agoyxxfis Ieib We are available for further questions.

Condition: new, 300 mm 300 mm 300 x 260 mm saw band length 3920 x 34 x 1,1 mm table height 780 mm band speed 20 - 100 m/min total power requirement 3,7 kW weight of the machine ca. 1,65 t dimensions 2,0 x 2,05 x 1,7 m Unused display machine!!!! 2-column high-performance automatic band saw from the SBS series • Modern SNC 20 control system for CNC models • Frequency-controlled saw drive • Work light • Powered chip brush • Hydraulic band tensioning • Clamping pressure adjustment • Double vise (before and after the band) • Creep speed for positioning • Bundle tensioning, electrically and hydraulically prepared • Chip conveyor Iedpjxfwbtefx Ag Isib The SNC 20 control system allows for convenient and uncomplicated input of up to 20 different sawing tasks (length and quantity). When the target dimension is entered, the control system automatically calculates the saw waste and the number of feeds. In addition, the error code display system provides quick analysis for troubleshooting. Including band path detection (1800 EUR)

Condition: new, 300 mm 300 mm 300 x 260 mm saw band length 3920 x 34 x 1,1 mm table height 780 mm band speed 20 - 100 m/min total power requirement 3,7 kW weight of the machine ca. 1,65 t dimensions 2,0 x 2,05 x 1,7 m PROMOTIONAL PRICE!!!! 2-column high-performance automatic band saws from the SBS series The SBS series impresses with its sophisticated technology, high quality and longevity and unrivaled, sophisticated standard equipment. • Modern SNC 20 control for CNC version • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic belt tension • Clamping pressure regulation • Double vice (before and after the belt) • Creep path for positioning Iiedpfxefb Nbfo Ag Ieb • Bundle tension prepared electrically and hydraulically • Chip conveyor The SNC 20 control allows you to enter up to 20 different sawing tasks (length and number of pieces) conveniently and easily. When the target dimension is entered, the control automatically calculates the saw waste and the number of feeds. Additionally, the error code display system provides quick analysis for troubleshooting.

Condition: new, 330 mm 330 mm Isdpfx Agsfb Nbge Isib 400x330 mm saw band length 4570 x 34 x 1,1 mm table height 800 mm band speed 20 - 100 m/min total power requirement 3,7 kW weight of the machine ca. 2,35 t dimensions 2,23 x 2,15 x 1,8 m PROMOTIONAL PRICE!!!! 2-column high-performance automatic band saws from the SBS series The SBS series impresses with its sophisticated technology, high quality and longevity and unrivaled, sophisticated standard equipment. • Modern SNC 20 control for CNC version • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic belt tension • Clamping pressure regulation • Double vice (before and after the belt) • Creep path for positioning • Bundle tension prepared electrically and hydraulically • Chip conveyor The SNC 20 control allows you to enter up to 20 different sawing tasks (length and number of pieces) conveniently and easily. When the target dimension is entered, the control automatically calculates the saw waste and the number of feeds. Additionally, the error code display system provides quick analysis for troubleshooting.

Condition: new, capacity 90 degrees: round 310 mm capacity 90 degrees: square 280 mm 400x250 saw band length 4020x34x1,1 mm band speed 18 - 100 m/min table height 890 mm Iiodpod Iiprofx Ag Iob total power requirement 2,2 kW weight of the machine ca. 0,99 t dimensions of the machine ca. 1,85 x 2,2 x 2,0 m Miter band saw, fully automatic, GBS 310/400 VA-I CNC • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gear made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to enter various parameters such as quantities and material lengths, automatic calculation of the cutting channel • CNC control for 10 different saw programs with 99 sub-programs for different lengths and quantities, e.g. 1 cutting program with various section lengths • Automatic feed unit (CNC) via ball roller spindle incremental feed with automatic length compensation. Adjustable for section lengths of 2 mm to 9,999 mm, remainder length 170 mm.

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350x200 saw band length 3375x27x0,9 mm band speed 18 - 100 m/min table height 880 mm total power requirement 1,5/1,8 kW Isdeupw R Aspfx Ag Ijib weight of the machine ca. 0,84 t dimensions of the machine ca. 1,85 x 1,9 x 2,0 m Demonstration system for a SPECIAL PRICE!! Fully automatic miter band saw • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start recognition) • Frame and gear made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to enter various parameters such as quantities and material lengths, automatic calculation of the cutting channel • CNC control for 10 different saw programs with 99 sub-programs for different lengths and quantities, e.g. 1 cutting program with various section lengths • Automatic feed unit (CNC) via ball roller spindle incremental feed with automatic length compensation. Adjustable for section lengths of 2 mm to 9,999 mm, remainder length 170 mm. Inclusive: - Micro-spray device - Leveling elements

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Hello, For sale: MebaEco 335 DGA band saw. Fully automatic CNC-controlled machine. The machine has been refurbished, is fully operational, and has been prepared for work by the authorized Meba band saw service in Poland. The machine has been thoroughly inspected, and all parts requiring replacement or repair have been consistently identified and replaced. Below are the technical specifications of the saw: Technical data: • Cutting diameter: 335 mm • Blade dimensions: 4400 x 34 x 1.1 mm • Table height: 750 mm • Feed range: from 5 to 2300 mm per stroke • Cutting area at 90°: flat material 500 x 335 mm • Cutting range at 45°: approx. 330 mm • Cutting area at 45°: flat material 320 x 335 mm • Round cut at 45° (left side): 305 mm • Cutting area at 45° (left side): flat 305 x 335 mm • Maximum cutting capacity at 30°: approx. 180 mm • Cutting area at 30°: flat 170 x 335 mm • Cutting speed: stepless adjustment from 15 to 150 m/min • Maximum material load: 250 kg/m Iisdpfx Asyzqv Sjg Isb • Total installed power: 3.0 kW Once programmed, the machine feeds the material automatically using the feed vise. Additionally, in the attached video you can observe the saw in operation. If you would like to see the machine in person, that is not a problem. The saw is currently located in our warehouse. If you have any questions, please feel free to contact me via email :)

Year of construction: 1978, condition: used, machine/vehicle number: 1078136, Behringer full automatic sawing machine in a good working condition. Iisdpfebta Dmox Ag Iob Capacity round 320mm

Condition: new, Year of construction: 2026, functionality: fully functional, Technical Parameters: Cutting diameter: 330 mm Cutting range (90° flat): 350 x 330 mm Saw band length: 4900×34×1.1 mm Cutting speed: 15–150 m/min (adjustable) Max. workpiece weight: 670 kg/m Total power requirement: 3.9 kW Table height: 750 mm Machine weight approx.: 2,600 kg Required space approx.: 1,700×2,400×2,200 mm Equipment: Laser line for cutting indication/marking Cutting process control Material monitoring Iedpfx Agsx H Ryns Ijib Material database Feed force adjustment Zero stop Job menu Bundle cutting clamp Vertical roller Double-sided opening / reduced end scrap Operation and Comfort: Swiveling control panel LED work lighting Receiving table Water spray gun Chip and Coolant Management: Screw chip conveyor Micro-dosing Coolant level and flow control

Condition: new, Year of construction: 2025, Technical data: • Cutting diameter: 335 mm • Blade dimensions: 4400 x 34 x 1.1 mm • Work table height: 750 mm • Feed range: 5 to 2300 mm per stroke • Cutting area at 90°: flat elements 500 x 335 mm • Cutting range at 45°: approx. 330 mm • Cutting area at 45°: flat elements 320 x 335 mm • Round cut at 45° (left side): 305 mm • Cutting area at 45° (left side): flat 305 x 335 mm • Maximum cutting range at 30°: approx. 180 mm • Cutting area at 30°: flat 170 x 335 mm • Cutting speed: continuously adjustable from 15 to 150 m/min • Maximum load material: 250 kg/m • Total installed power: 3.0 kW • Machine weight: approx. 2550 kg • Required installation space: approx. 4350 x 2300 x 1900 mm Standard equipment MEBAeco 335 DGA-2300: • Access protection in accordance with CE thanks to a light barrier. • Robust, two-column linear construction of the MEBA band saw with automatic material feed system (range 5–2300 mm per stroke). • CNC control for easy program entry and visualization. • Automatic cutting at any angle in the range of 30°–135°, with the possibility of setting the length and number of elements. • Possibility to create and manage up to 255 cutting programs. • Intuitive data entry reduces the risk of operator errors. MEBA High Performance Package: • Saw feed by servo drive and ball screw mechanism with automatic monitoring of cutting pressure and feed. • Constant and optimized working conditions when cutting a variety of materials, including thin-walled profiles. • Precise and fast material positioning by means of AC rack and pinion drive with a stroke length of up to 2300 mm and integrated roller conveyor up to 3000 mm long. • Clamping jaw system that allows opening from both sides, with bars for transporting heavier materials. Design and functionality: • Robust saw frame made of welded vibration-resistant steel. • Saw blade set at a 3° angle to the table for increased efficiency and blade life when cutting steel profiles. • Integrated saw blade guides with precision bearings to minimize band deflection. • Carbide sliding guides for maximum precision. • Point 0 (rotate the miter saw) located at the intersection of the blade with the movable clamping jaw, eliminating the need for length correction when changing the angle. • Automatic programming of angles on the control panel. Iijdpfx Agswf Hm Ij Ijb Vice system: • Patented double angle vice system with automatic adjustment of position to the cutting angle, which ensures a secure and precise grip of the material close to the cutting line. • Clamping performed by full-stroke actuators. Other functions: • Automatic lowering of the saw frame in front of the material when starting the cut, minimizing cycle times. • Optimal conditions for both single and serial cuts. • Infinitely variable band saw drive controlled by an inverter (15–150 m/min). • Precisely pre-machined elements eliminating play.

Condition: new, Year of construction: 2026, The CUBO 400 NC model is a modern band saw that ensures operator safety thanks to a guard made of specially designed metal sheets, protecting all four sides and all moving parts of the machine. The guarding system allows full access to the machine and easy maintenance. An innovative and user-friendly 7" touchscreen with an intuitive interface enables full control of all machine settings. It allows programming of up to 99 cutting programs and 10 different cutting lengths on the same bar. The CNC control provides access to all machine operating functions: automatic calculation of blade thickness, number of stroke repetitions, band speed, and blade lowering speed. The interface also allows monitoring of the CUBO operating status and diagnosing irregularities thanks to a self-diagnostic function. Iiedpjyym Eaofx Ag Iob An integrated feeder enables automatic repetition of the cutting process. The feeder moves along a hardened and chrome-plated guide; high positioning accuracy is ensured by precise feeding via a ball screw with a self-braking motor, mounted on a floating plate to absorb loads caused by irregular bars. The saw body has a rigid cast iron structure made of square-section tubes, ensuring high resistance to deformation and better performance with all types of materials. The bow is equipped with a worm screw and a crown gear made of a highly resistant bronze alloy. A mechanical material detection device ensures rapid approach of the blade to the material by automatically detecting the first cutting point. The final cut is controlled by a microswitch on the blade guide, allowing perfect band alignment thanks to hardened metal pads and additional bearings. Automatic IMET machines can be connected to a company network and operated remotely using the SAWFACTORY system and a modem. SAWFACTORY is dedicated software that enables management of the cutting process from the office by setting programs and monitoring operation via a web application. The software also allows remote technical support. Technical parameters: Power supply: 3-phase 400V Total power: 2.2 kW Arm lowering control: Hydraulic with smooth adjustment Cutting speed: 18–110 m/min Vise base height: 890 mm Blade dimensions: 4020 × 34 × 1.1 mm Feeder length: 515 mm End scrap: 80 mm Minimum material length: 15 mm Dimensions: 1950 × 1800 × 1990 mm Weight: 990 kg

Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: 3115, functionality: fully functional, empty load weight: 2,000 kg, feed length X-axis: 2,000 mm, saw band length: 4,870 mm, saw band width: 32 mm, TECHNICAL DETAILS Bandsaw blade length: 4,870 mm Bandsaw blade width: 32 mm Isdpfx Asyuaz Neg Ioib Bandsaw blade speed: 110 m/min Cutting capacity (round): 340 mm Max. feed length: 2,000 mm MACHINE DETAILS Control: Conventional Saw type: Automatic Horizontal/Vertical: Horizontal Dimensions & Weight Dimensions (L x W x H): 2,000 x 1,850 x 1,800 mm Net weight: 2,000 kg Transport packages: 3

Condition: new, Year of construction: 2025, functionality: fully functional, saw band length: 4,242 mm, High-performance fully automatic band saw in robust double-round column design and full enclosure. Developed for the highest sawing requirements. Technical Data: Cutting range Ø 325 mm or 380 x 325 mm Iedpfobrxk Uox Ag Ieib Saw blade dimensions 4242 x 34 x 1.1 mm Saw drive 3.75 kW Working height approx. 820 mm Weight 2200 kg Connection 400 V-50 Hz Including technical features: - Smart NC control with 5.7" HMI touch screen for up to 100 different programs - V-Drive - Mitsubishi PLC control - Display of improper operation in plain text - Frequency-controlled saw drive 15–100 m/min - Material database for easy setting of cutting parameters - Digital display of saw feed rate in mm/min and cutting performance in cm²/min - Display of saw frame position in mm - Automatic cut-in, selectable with or without front cut. Length of the front cut is freely programmable - LED strip work light - LED signal tower for visualizing machine status - Automatic band guide arm positioning - Vibration damping roller for vibration-free sawing - Hydraulic, adjustable chip conveyor - Clamping pressure regulation for both vices - Hydraulic saw blade tensioning with band breakage monitoring sensor - Coolant device with additional cleaning nozzle - Saw cut detection via rapid advance button - Manual material positioning with slow-motion function - Automatic cutting pressure regulation, pre-settable based on material quality - Material retraction after completion of cut to protect the saw blade during upward movement - Integrated material support on the infeed side, approx. 1,500 mm - Discharge table with coolant return, approx. 500 mm

Condition: used, The ABS 325 S NC is a robust and precise addition to the category of Horizontal Mitre Cutting Bandsaws, belonging to the Auto Miter Bandsaw group by KNUTH. This high-performance production band saw features a dual column design that enhances stability and cutting accuracy. The material feed is powered by a controlled servo motor with ball screw drive, offering a remarkable positioning accuracy of ±0.2 mm. Users can easily program and manage operations via the Omron touchscreen controller, which supports up to 30 programs with 50 steps each. For added flexibility, the ABS 325 S NC includes an option for hydraulic bundle clamping, alongside a digital display for easy reading of manually set miter angles. This fully automated saw excels in applications requiring mitre cuts in solid materials, tubes, and profiles, and is designed for high durability in demanding environments. With features like a hydraulic cutting angle clamping and automatic stroke height control, this saw ensures minimal downtime. You can request a quote for the ABS 325 S NC in the category of Horizontal Mitre Cutting Bandsaws and discover why this Auto Miter Bandsaw is a perfect fit for your production needs. Iodjyq N Iqepfx Ag Ijib

Condition: good (used), Year of construction: 2002, MEP automatic bandsaw Model Shark 320 AXI Year : 2002 Ijdpfxsyvzvxo Ag Ieib Capacity round : 260 mm. Capacity 45 / 60 degrees : 230 mm. / 150 mm. Capacity square. : 320 x 220 mm. Speed: 40 - 80 m./min.

Condition: new, neu ca. 10 Wochen ab Auftrags Italien 25680 € 490.49 € Schwenkrahmen 3270x27x0,9 mm 35/70 (PLC) m/min 20-100 (CNC/Touch) m/min 300 mm 240 mm 420x200 mm rund 240 mm, quadrat 230 rund 170 mm, quadrat 170 220 mm 835 mm 0.37 kW 0.12 kW 3220 mm 2050 mm 1900 mm 1090 kg VERSION PLC: adjustment of material feed by handwheel, counter and limit switch VERSION CNC:feed lenght and numbers by CNC (99 progamms) VERSION TOUCH: as CNC but with 7" touchscreen for easier operation automatic cutting cycle clamping, saw blade and cutting fluid on, cutting operation, saw blade and cutting fluid off, fast return stroke, declamp automatic feed 800 mm/stroke chip conveyer (CNC/Touch) variable cutting pressure Machine with 2 cutting speeds (PLC) orspeed variator (CNC/Touch) cutting fluid system automatic saw blade breakage detection hydraulic vices suggested max. diam. in automatic mode for full material: 150 mm Isdpfxsynm Snj Ag Ieib maerial chute user manual in GERMAN ALTERNATIVES: Model 420ACNC € 31.700,00 Model 420ATouch € 33.750,00

Condition: good (used), Year of construction: 2015, functionality: fully functional, cutting height (max.): 320 mm, cutting range round steel at 45°: 260 mm, stepless cutting speed hydraulic material clamping infeed automat coolant device roll conveyor manual swivable cutting frame for miter cuts Technische Daten: Schnittbereich rund 0° / cutting range round 0° 320 mm Schnittbereich vierkant 0° /cutting range square 0° 350x320 mm Iodewvi Agspfx Ag Ioib Schnittbereich rund 45° / cutting range round 45° 260 mm Schnittbereich vierkant 45° /cutting range square 45° 250x180 mm Schnittgeschwindigkeit / cutting speed 20-100 m/min. Sägebandlänge / dimensions of the saw band 3660x27x0,9 mm Antriebsleistung / drive capacity 3,9 kW Gewicht der Maschine ca. / weight 1825 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.