2014 VELA-VEB MH2330

VELA-VEB MH2330

Condition: excellent (used), Wide Belt Sander for Calibration and Fine Sanding SCM Model RCS Pedpfx Aexqggcjh Hegg 1st Unit: Calibration Roller, Steel 2nd Unit: Combination Unit (Roller 60 Shore, sanding pad with 2 inserts – hard, soft) Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Main motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotive table height adjustment Main switch lockable 2 x emergency stop Table extension with 2 rollers, front and rear Sanding pad inserts fitted with new graphite cloth Including as-new sanding belts All documentation included Note for used machinery: • Specifications, data, and prior sale are subject to change. • Prices stated are ex works – free loaded! • The machine has been cleaned and functionality tested. • All machines are sold as seen without any rights to warranty. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Condition: good (used), Year of construction: 2007, Technical characteristics : - Max machinable length 3200 mm - Minimum machinable length 200 mm - Maximum width 200 mm - Minimum width 40 mm - Maximum workpiece height 130 mm - Depth with max Ø to tenon 320 mm: 105 mm - Tenoning carriage speed min / max 0/100 m / min - Min / max profiling speed: 3/15 m / min Tenoning: 1- end cut saw 5.5 hp (4 kW) Saw Ø 400 mm 2- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard 3- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard Vertical positioning with continuous axis 4- Digital angular adjustment clamp Profiling: 5-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tools 130/240 mm Axle stroke 280 mm Time-delayed anti-shattering intervention during calibration Double direction of rotation Vertical and horizontal positioning with continuous axis 6-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Axle stroke 280 mm Vertical and horizontal positioning with continuous axis 7-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Vertical and horizontal positioning with continuous axis 8-: close-out recovery group Vertical and horizontal positioning with continuous axis Device for extracting the shutter 9-: lower horizontal shaft for groove Vertical and horizontal positioning with continuous axis 88.5 hp (66.4kW) 10-: digital guide Pgsdpjt R T Hcsfx Ah Hog 11-: Return of parts to the operator NO TOOLS AVAILABLE OBTAIN ADDITIONAL PHOTOS NOTE: SUBJECT TO CHANGES IN TECHNICAL DATA

Year of construction: 1999, condition: excellent (used), 1999 Start type: to be agreed Cost of delivery: Customer cover Conditions of delivery: OWN RECEIPT Category: Grinding machines in Poland Subcategory: Through grinding machines Subcategory 2: Grinding machines, brushing machines Pgjdpfx Aod Nmdksh Hsg Description Manufacturer VANGROENWEGHE Model / type of TYPE M-300-COMBI / CE machine

Condition: used, Year of construction: 2016, MORBIDELLI AUTHOR M400 MAIN FEATURES 5-AXIS MACHINING UNIT "PRISMA: QUALITY AND PRODUCTIVITY AT THE HIGHEST LEVEL XILOG MAESTRO SOFTWARE: EXTREMELY SIMPLE MATIC PROGRAMMING" WORKTABLE: ONE POSITIONING FOR MULTIPLE MACHINING OPERATIONS TECHNICAL DATA AUTHOR M400 AXES Working area X-axis (inside stop) mm 3,680 Working area Y-axis (max. loadable piece on rear stops) mm 1,680 Workpiece passage Z / number of Z axes mm 170 / 1 Workpiece length with pendulum machining mm 1,650 Travel speed X-Y axes Pro-Speed m/min 85 Z-axis speed m/min 30 INSTALLATION Installed power KVA 62÷82 Compressed air requirement NL/min 400 Extraction air requirement m³/h 4,430 Extraction air speed m/s 25 Extraction nozzle diameter mm 250 GENERAL CHARACTERISTICS CNC-controlled drilling and milling center in gantry design and work table with workpiece supports, for carrying out: - vertical drilling on the panel surface - horizontal drilling on all four sides of the workpiece - groove milling with disc milling cutters - general milling work 3-4-5 axes MACHINE STRUCTURE The basic structure is a monolithic construction made of thick-walled steel. It is stiffened by welded reinforcements across the entire machine bed, making it extremely stable. The table shape used, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow with a minimum of space requirements. The mobile gantry support is made of a solid monoblock. It is positioned in the X direction on prismatic ground guides via recirculating ball slides. On this mobile unit carrier, the work unit is mounted on prismatic, ground guides and recirculating ball slides. All axes are moved on large-section prism linear guides and recirculating ball bearings with a large contact surface, ensuring optimal gliding even at the highest speeds and accelerations. Precise and rapid positioning of the movable gantry (X-axis) is achieved by a pinion and rack with helical teeth. Large-section recirculating ball screws ensure precise positioning of the work unit along the movable gantry (Y and Z axes). MOTORS, DRIVES AND INVERTERS Perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors, designed to achieve speeds of up to 90 m/min while ensuring the best finishing quality. CONTROL The control unit consists of a numerical control for milling and drilling machines with "Xilog Maestro" graphical user interface based on the Windows 7 Office operating system. 17-inch LCD color screen. QWERTY keyboard. Tilting control panel. Machine interface with Xilog Maestro software. Xilog Maestro Features Programming Parametric graphic programming Import of DXF files (2D; SPLINE, POLYLINE 3D geometries), linear or circular interpolation in three axes, linear in space, spiral in the selected plane. Programming with graphic and syntax aids for drilling and milling operations Automatic optimization of drilling operations and tool change cycles Possibility of Plate zero point shift for drilling on inclined or curved plate sides Pjdpfx Ajxnldbsh Hogg

Condition: used, mileage: 230,556 km, power: 368 kW (500.34 HP), first registration: 09/2017, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x2, wheelbase: 4,600 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, suspension: air, total length: 10,320 mm, total height: 3,450 mm, loading space length: 6,430 mm, Year of construction: 2017, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, lane keeping assist, parking heater, seat heater, traction control, trailer coupling, = Additional Options and Accessories = - Alarm system Pjdpfx Ahsv Uin Ij Hegg - Differential lock - Remote central locking - Lift axle - Air suspension - Towing jaw coupling - PTO (power take-off) - Radio - Reversing camera - Disc brakes - Sun visor - Lane departure warning system - Auxiliary heater - Toolbox = Notes = Volvo FM 500 6x2*4 Lift and steering axle Full air suspension HMF 3220 K7 4 x hydraulic outriggers 7 x hydraulic extensions Scanreco radio remote control 4.70 m - 5,910 kg 6.50 m - 4,000 kg 8.40 m - 2,870 kg 10.30 m - 2,170 kg 12.40 m - 1,710 kg 14.50 m - 1,400 kg 16.70 m - 1,190 kg 18.90 m - 1,040 kg = Further Information = Technical Information Number of cylinders: 6 Axle configuration Brakes: Disc brakes Suspension: Air suspension Front axle: Tire size: 385/65R22.5; Steering; Left tire tread: 80%; Right tire tread: 80% Rear axle 1: Tire size: 295/80R22.5; Twin tires; Left inner tread: 80%; Left outer tread: 80%; Right inner tread: 80%; Right outer tread: 80% Rear axle 2: Tire size: 385/55R22.5; Steering; Left tire tread: 70%; Right tire tread: 70% Weights Unladen weight: 16,537 kg Payload: 11,463 kg Gross vehicle weight: 28,000 kg Functional Crane: HMF Environment Emission class: Euro 6c Financial Information Price: On request Identification Type number: FM500 / 6x2 / HMF 32TM / CRANE / = Company Information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), Russian spoken. We strive to provide correct information, but no rights can be derived from the texts provided.

Year of construction: 2022, condition: new, Multisaw machine for precision cut of small elements that is used for honey bee frame productions -Power 11kw -Spindle diameter fi 70mm Pedpfx Ahjh Hxycj Hegg -Saw number 10 -Saw diameter 210mm -Minimum length of work peace 100mm -Max height 40mm -Feeding speed 4-8m/min -Quick-change saw holder

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, working width: 1,350 mm, Costa calibration machine Podjwmxh Tjpfx Ah Hogg

Condition: used, REX four-sided planer, planing width 51 cm, maximum planing height 20 cm, 2 feed speeds, vertical spindles have 2 rotation speeds, electric table lifting device Podjrxf Smjpfx Ah Hjgg

Condition: good (used), Year of construction: 1994, 2 side planer top - bottom constant table ( always same infeed height ) max. planing width 600 mm max. planing height 280 mm planing shafts with strip knives immediately ready for use Psdpohuthyjfx Ah Hogg

Condition: new, Holzkraft minimax t 45c table router (5502044) Low-priced, with rigid milling spindle and cast iron work table. - Sturdy cast steel construction - With rigid milling spindle - 3 spindle speeds 3500 to 10000 min¯¹ - Milling spindle with right-left rotation - Large dimensioned milling unit made of grey cast iron, directly fixed to the table - With suction hood under the worktable for better extraction - Solid and precise cast iron table - Quick and easy speed change - Powerful motor with 5,0 kW - Standard arc milling protection hood - Quality Made in Italy Equipment details Cast iron milling unit - Directly mounted on the milling table - Milling spindle mounted high up with precision ball bearing, thus lowest possible bearing load and longest possible service life - 3 milling speeds from 3500 to 10000 min¯¹ Powerful motors - Equipped with powerful three-phase motor Milling guard The standard milling guard is equipped with a height-adjustable guide rail and guard plate as standard for maximum safety. Milling fence - Precise milling fence with a quick adjustment and a fine adjustment with scale on the fence jaw. - The integrated suction connection ensures a clear view Milling table opening - A large milling table opening also allows the use of larger flattening cutters and tenoning and slotting tools above and below the table Pjdskyt Ulepfx Ah Hegg Curved milling protection hood - Included as standard Reversible fence jaws - versatile integratable stop for bridging the tool gap - enables safe working even with narrow workpieces Accessories HOLZKRAFT safety system fence jaws, adjustable - Optimum protection on every router table, individually adjustable to the task at hand - Universal basic elements for mounting AIGNER safety and working devices - Quickly adjustable due to simultaneous clamping of all individually adjustable rods - Made of high quality aluminum - Can be used universally on all HOLZKRAFT table routers - 500 mm: Item no.: 5851000 - 650 mm: Item no.: 5851650 TECHNICAL DATA Dimensions and weights Weight (net) approx.: 240kg Suction connection Suction port diameter: 2 x 120mm Work table Working table length:1000mm working table width: 575mm table height: 900mm Set up information Required space length: 1945mm Required space width/depth: 920mm Explanation of space requirements: The dimensions take into account maximum travel distances or useful lengths. Machine body length: 1000mm Machine body width/depth: 575mm Working area length: 1600mm Working area width/depth: 1600mm Explanation of working area: Please add the dimensions given with the space requirement to obtain the free installation area recommended for the machine. Electrical data Supply voltage: 400V Mains frequency: 50Hz Power drive motor: 5,0kW Milling spindle useful length of the spindle: 100mm spindle protrusion max. over table: 130mm Spindeldrehzahl(en): 3500/7000/10000min¯¹ spindle arbor diameter: 30mm Milling tool diameter max. Tool diameter max. lowerable: 180mm Tool diameter max. profile milling: 210mm SCOPE OF DELIVERY - arch milling protection cover - aluminum stop jaws Holzkraft dealer - accessories available on request!