Timber planer 2- sides

Ledinek

Condition: excellent (used), Year of construction: 1990, LEDINEK BSG 150 head sharpener with knife setting device - in a warehouse - Slovak production TECHNICAL PARAMETERS engine power 0.55 kW sharpening length 440 mm tool diameter 125 mm - 203 mm Guedpoihpl Refx Aa Eod manual feed spindle diameter 50 mm knife setting device Machine dimensions: 120/85/165 cm weight 400 kg

Condition: used, Year of construction: 2019, MAXIMUM CHIPPER DIAMETER: 250 MM Gjdpeyffi Tjfx Aa Eeud ENGINE POWER: 75 kW GRINDING DRUM WIDTH: 640 MM GRINDING ROLLER DIAMETER: 660 MM UPPER ROLLER WIDTH: 640 MM MAXIMUM OPENING OF UPPER ROLLER: 600 MM KNIVES ON MACHINE: 3 FEED ROLLERS: 2

Condition: used, Year of construction: 2003, functionality: fully functional, Ledinek High speed double side calibrate planer 150 m/min Rotoles 300 2V-KS 150 Gujdpfx Ajzc H T Uea Ejd 214 KW

Condition: good (used), Year of construction: 2017, CALIBRATION – PLANER MACHINE, MANUFACTURER – LEDINEK COMPANY, Model ROTOLES 400 D – S, Godpfezd E R Hsx Aa Eeud Year of Manufacture – 2017. Condition of the machine – good.

Condition: excellent (used), Self-loading press for gluing Orma LS/ECO/CA 30/13 Working length 3000mm Working width 1300mm Automatic material loading Glue application system Shelves heated with oil to 130C Top pressure force 57t Guodpfxjv Nhx Uj Aa Eed Side pressure force 9t Year of production 2001 CE certificate

Condition: not inspected (used), Year of construction: 2003, functionality: fully functional, Heavy-duty Stratoplan planer with 6 spindles. Year of manufacture: 2003 Feed rate: 30 m/min to max. 300 m/min. Spindles: U/T/R/L/U/T Gedpfx Aaswhdnbj Ejud Working height: 17 mm to max. 120 mm. Working width: 50 mm to max. 300 mm. Supplied with infeed table (accelerator) and cross conveyor. 6 sets of tools. Table height: 1,100 mm Working width: 50-300 mm Working height: 17-120 mm Feed rate: 30-300 m/min Control system: Siemens S7 Connected load: 390 kW

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 4314, power: 15 kW (20.39 HP), Infeed Length : 1800-6000 mm Gusdpfju Nuh Tex Aa Eed Workpiece width : 75-320 mm Workpiece thickness : 20-165 mm Outgoing Length : 750-6000 mm Waste Length : 400 mm Feed speed up to : 190 m/min Table height : 1000 mm Saw blade diameter : 700 mm Saw motor : 15 kW Saw stroke : 3.6 kW Horizontal & longitudinal feeding conveyors

Condition: good (used), Felder saw in nice condition. Has only had occasional use so in nice condition. Price has just been reduced and will not reduce any further. Please only enquire if you want to buy it at this price before we scrap it as space is needed. Gusdpfx Aajrubg Ho Ejd

Condition: like new (used), Year of construction: 2004, I sell the industrial thicknessing machine LEDINEK ROTOLES 400 D. Machine year 2004. Max. working width 400mm Max. working height 2-150mm Min. element length 150mm Max. construction cutting take-out 8mm Rotation Spindle head 34-knives Variable feeding speed 10-30 m/min. Working thickness motirical adjustable with digital readout. Dust extraction hose diameter 200mm (30m/sec. required). Main spindle motor 15,0KW. Feed motor 3,0 KW. Gjdpfx Aswlkmxsa Esud Total power 18 KW. Total weight 1800kg. European product, made in EU, with CE certificate and instruction manuals. Machine in stock in Kežmarok, Slovakia, possibility to test.

Condition: excellent (used), functionality: fully functional, working width: 400 mm, planing height: 100 mm, planing width: 350 mm, Four-sided machining size: 350mm x 100mm. It has a fifth horizontal 400mm axis, which can be used for series cutting. Total power: 24Kw. It can be tested, it is in excellent technical condition. Gjdpfx Aoyt Hbysa Eeud

Condition: good (used), Manufacturer: MBT Type: MV-250 S Motor: 5.5 kW Godshzr U Iepfx Aa Eoud Hopper size: 780 x 600 mm Housing size: 3500 x 1000 x 2200 mm

Condition: excellent (used), Year of construction: 2004, working width: 300 mm, planing height: 120 mm, spindle diameter: 50 mm, planing width: 300 mm, working height: 1,000 mm, total width: 2,800 mm, total height: 2,400 mm, total length: 3,800 mm, overall weight: 13,000 kg, power of feed motor: 24,000 W, spindle speed (min.): 5,500 rpm, rotational speed (max.): 6,000 rpm, rotational speed (min.): 5,500 rpm, height adjustment type: electric, planer shaft diameter: 205 mm, workpiece height (max.): 120 mm, workpiece width (max.): 330 mm, input voltage: 400 V, tool diameter: 205 mm, number of spindles: 5, power: 154 kW (209.38 HP), table width: 330 mm, 4-Sided Lamella Planer 300 x 120 mm Adjustable feed speed from 30 to 150 m/min. Equipment: 2 upper and lower horizontal cutterheads Z 10; 2 right and left horizontal cutterheads, Z 10, equipped with jointers. - Horizontal shaft rotation speed: 5,500 rpm - Vertical spindle rotation speed: 6,000 rpm - Vertical spindle shaft diameter: 50 mm - Vertical spindle clamping length: max. 185 mm Tool diameters: - Horizontal shafts: 205 mm - Vertical spindle head tools: 160 - 205 mm Cutter blocks: - Thicknessing and surfacing shafts with cutter blocks: - 2 x Planer head 205 x 330 mm, Z=10, screw clamping - Lamella planer knives: 3 x 35 x 330 - 2 x Hydraulic planer head 190 x 130 mm, Z=10, screw clamping - Lamella planer knives: 3 x 35 x 130 - Weight: approx. 13,000 kg - Machine dimensions L x W x H: approx. 3,800 x 2,800 x 2,400 mm - Installed power: 154 kW Additional Aggregates Lower Scoring Saw Unit This unit is used for milling balance scores on the lower edge of worked lamellas with a width over 200 mm. The saw blade is mounted directly onto a flat motor using a flange. Horizontal movement is pneumatic with a saw stroke of approx. 150 mm (movement within the gap between boards; activated by a mobile spot sensor). The scoring zone is set manually, and the travel distance is displayed on a counter. Vertical movement uses a pneumatic cylinder with a saw stroke of approx. 30 mm (to allow quick switching between lamellas with/without balancing slots during processing). The end stop for scoring depth is set manually, and travel is displayed on a counter. Lamellas must be fed into the machine individually, one by one (not in continuous push feed). Technical Data: - Scoring saw motor: 15 kW - Saw rotation speed: 5,000 rpm - Shaft diameter: 40 mm - Max. cutting depth: 50 mm - Tool diameter: 300 x 4 mm - Extraction hood support diameters: 120 mm - Additional feed rollers: one above (diameter 240 mm), one below (240 mm, toothed and hard-chromed). The scoring saw is delivered with a blade. - Scoring saw working area: 37.5 to 225 mm Powered Lateral Infeed Roller Pneumatically suspended. Motorized width adjustment via push-buttons (if the positioning command is set to position adjustment (option), the lateral pressure roller can be adjusted from the control panel). The set width is shown on a SIKO counter. - Roller diameter: 190 mm Godpfxowz Nzmj Aa Esud - Roller width: 40 mm Automatic Knife Jointing Device The knife jointing device is fixed-mounted and manually operated.

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 2962 Ident:171526, Multi-Sided Wide Planer with Beveling Unit LEDINEK SUPERLES 400 4V+4F MACHINE DATA Machine type: Multi-Sided Wide Planer with Beveling Unit, Right-Hand Version Version: Manufacturer: LEDINEK Year of manufacture: 1997 Model: SUPERLES 400 4V+4F Machine No.: 2962 Condition: Used, Ready for use DESCRIPTION SUPERLES 400 4V+4F Multi-Sided Wide Planer with Beveling Unit Heavy-duty, universally applicable planer with an innovative quick-change tool system. The machine is suitable for demanding machining of KVH, glulam lamellas, heavy beams, and glued laminated timber. The machine has 4 work spindles and 4 beveling units, arranged as follows: 1. Horizontal at the bottom 2. Horizontal at the top 3./4. Vertical left/right (opposite) 5./6. Chamfer top left/right (opposite) 7th/8th chamfer bottom left/right (opposite) Tools: Horizontal shaft speed: 3,000 rpm Vertical spindle speed: 4,000 rpm Chamfer spindle speed: 9,000 rpm Tool diameters: Horizontal shafts: 205 mm Vertical heads: 160 – 300 mm Chamfer cutter: Ø 180 / 45° x 10 mm Tools: Two vertical shafts and two planer and thickness shafts are still available. Extraction nozzle diameter: Dressing shaft: 200 mm Thickness shaft: 250 mm Vertical shafts: 2 × 200 mm Bevel cutters: 4 × 80 mm Extraction speed: min. 30 m/sec Gjdpfx Aaowhvzye Eoud General: Air pressure: 6 bar Weight: 14,000 kg Installed power: 140 kW with control panel and control cabinet

Year of construction: 2013, condition: ready for operation (used), Connected load: 4kW, weight: 1t. Guodpfx Aaohlp Efj Ejd