Membrane press

ORMA AIR/SYSTEM/ECO 25/14

Year of construction: 2022, condition: as good as new (ex-display), Aluminum angled conveyor incl. mobile substructure horizontal area 1,100mm Rising area 1,500mm Pitch angle in bend 60° Total conveyor length: 1,750mm Discharge height: approx. 1,600mm Height of the horizontal: 300mm (feed height) Conveyor belt width 500mm PU conveyor belt including driver and corrugated edge petrol matt Drive: motor 0.25KW, speed 0.2m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 4x freely steerable transport rollers with parking brake 2 pcs. corrugated edges 50x35mm 11 pieces T-50 studs welded on in the middle - 481mm pitch 2-layer particularly laterally stable Todpfxei Igiks Acnsb Usable width 290mm, results as follows: Transverse arrangement -70+30-5+290-5+30-70mm

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, *Wemhöner Variopress Model Basic 1000 Plus/Pin – Year of manufacture 2008 *Very good condition, little used Todpfx Ajxbcudscnjb *Type KT-MB-28/15-240 *With automatic pin system and inline rotating table *2 tables with automatic Vario-Pin system *With Teflon coating for pre-glued foil *Foil laying system for pin table (pre-glued foil) *Heating plate size: 2800 x 1500 mm *Max. workpiece size: 2,540 x 1,250 mm *Membrane: Yes *Cutting station *Foil storage paternoster, 3.2 m high, with 14 hanging rods *PLC control: Siemens S7 *Operator panel for the PLC control: SIEMENS TP 270 (touchscreen) *Automatic membrane tensioning *Installed power supply: 38.5 kW *Max. chamber pressure: 6 bar *Max. press opening: 150 mm *6 cylinders with Ø 125 mm *Operating voltage: 400V 50/60Hz *Height of the press chamber: 40 / 60 mm *Max. press force: 2400 kN *Operating pressure of the hydraulic system: 320 bar

Year of construction: 2004, condition: ready for operation (used), Max. working width: 1000mm, feed rate: 5-20m/min, height: 2200mm, length: 4000mm, weight: 3.3t, with documentation, was maintained regularly. Tsdpsi E Trpefx Acnsb

Condition: new, Year of construction: 2026, functionality: fully functional, power: 100 kW (135.96 HP), number of axes: 2, overall weight: 219 kg, table length: 1,200 mm, table width: 900 mm, Equipment: CE marking, documentation/manual, 1290 is a professional laser cutter for serious manufacturing. It has a through table, allowing you to cut materials and rolls of fabric of any length. The Wattsan CNC laser machine is built to have a 24/7 work capacity in series production. Wattsan 1290 ST can cut up to 10–13 mm and engrave wood, cardboard, acrylic, glass, rubber, stone, wool, etc. This model has a feature: you can remove the front wall and use the opened space to cut sheets and rolls of materials. It also has a waste collection container that will make the work much more pleasing. You can give our managers a call for additional details! Wattsan 1290 ST characteristics: Working area: 1200x900 mm Tedpfx Aceh Ucrbonjb Laser power: 100-130 W Working table lowering depth: 40 mm Positioning precision: 0,03 mm Machine size: 1410 x 1790 x 670 mm + if it is on wheels 315 mm Packing size: 1880 x 1490 x 810 mm Weight: 368 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: as good as new (ex-display), FULL LINE of Double-side Sizing-Milling & Edge Banding. Composed of the following machines: VZ0200A) Gantry-portal Loader (Double pick-up station) "BARGSTEDT" Mod. TBH 500/D/30/12 VZ0200B) 1st Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 525/8/A3/15 VZ0200C) In-feeding Rollerway "HOMAG" Mod. TDL 310/30/12 with 90° Turning device (from lenghtwise to crosswise) with double cone system VZ0200D) 2nd Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 526/10/A3/30 VZ0200E) In-feeding Rollerway "HOMAG" Mod. TDL 510/25/12 with 90° Turning device (from Todpfx Acedt Rgvjnob crosswise to lenghtwise) with double cone system VZ0200F) Cleaning machine "WANDRES" VZ0200G) Gantry-portal Stacker (Double pick-up station) "BARGSTEDT" Mod. TSP 410/D/25/12

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 0-243-02-2974, functionality: fully functional, The equipment was purchased new in 2007 for its current location. The factory ceased operations in 2016, and the equipment has not been used since then. The equipment is available for purchase as-is or fully dismantled and loaded onto a truck. Tjdpfx Acszcn Ndjnsb Do not hesitate to contact for more information.

Year of construction: 1994, condition: used, We offer this used F. Zambon Rover 35 bridge saw, year of construction 1994. Manufacturer: F. Zambon Model: Rover 35 Year of manufacture: 1994 Condition: used Category ID: 431 Type: Bridge saw Tedpfx Acsyuuudenjb If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2000, machine/vehicle number: SO117, Used HDPE 4+4 Blow Molding Machine TECHNE SYSTEM up to 2700 bphMain Technical Features and Premium UpgradesThis HDPE Blow Molding Machine offers a highly specialized system for blow molding containers made of high-density polyethylene (HDPE). Specifically, this is a TECHNE 4000 T660 manufactured in 2000, which is preserved in an OPTIMAL state of cleanliness and order. Reflecting its meticulous maintenance history, the machine was cleaned daily in the lower section, and completely blown and cleaned once a week, starting from the extruder down to the bottom.In December 2023, the system received a brand-new retrofit consisting of a latest-generation Gefran PLC equipped with a color touch screen, fully customizable functions, and complete machine control via HMI. This upgrade also features a Gefran GFC modem for remote assistance.The machine operates with a 4+4 cavity double head configuration with a 150 mm cavity spacing, handling bottle formats up to 2 liters and producing up to 2700 bottles per hour (bph). This design optimizes production with a symmetrical and highly efficient layout. Furthermore, the system is equipped with proportional hydraulics for movements utilizing Rexroth hydraulics, along with independent control of 8 parisons. It features 8 parisons with independent profiles managed by Moog servovalves, offering precise parison control up to 400 points.The production line comes exceptionally well-equipped with peripheral machinery, including a complete plastic loader kit with a Moretto mixer, a Tria granulator (2022), and a Villani double leak tester (comprising 2 independent leak testers). Additionally, an extensive complete replacement kit is included. These spare parts encompass:All Rexroth proportional movement valves (carriage, nozzles, and molds)All linear transducersCarriage translation columns complete with a full set of bushingsClosing lever equipped with bushings and pinsA Voith hydraulic pumpAll ATOS hydraulic cylindersA brand-new direct current (DC) extrusion motorA brand-new direct current (DC) inverterVarious mechanical parts, heating elements, nozzles, cores, and diesYou can access this machine starting mid-October.Mold Configuration and FlexibilityTo ensure high precision in shaping bottles, the blow molding system provides a cavity spacing of 150 mm. Additionally, the machine includes a double carriage with a 660 mm carriage stroke, which allows you to control the production cycle optimally and minimizes downtime. In particular, this Blow Molding Machine accommodates containers up to 2 liters, giving you significant flexibility in producing various types of packaging. The system supports both straight or inclined blowing (up to 30 degrees), adapting easily to different container geometries.The extrusion system features a 100 mm / 25 L/D extruder equipped with a vertical filter. Although the machine does not include molds in its standard supply, it supports a wide range of mold sizes, up to a maximum capacity of 2 liters. Furthermore, you can easily adapt the entire system to meet specif... Tedpfxsvgvkae Acnsb

Condition: used, machine/vehicle number: 006279, X axis working area: 3100 mm Tjdpfx Acokw H Eksnob Y axis working area: 1250 mm Working Table: Flat table Number of controlled axes: 3 axes Total number of drilling spindles: 11 Total number of tool changer positions: 8

Condition: excellent (used), Year of construction: 1997, Single shaft shredder form Weima Model -WL6S Main motor -22kw Tedpfxjivptte Acnjb