Pellet production line

Tekno Uno / Munch 160 / RMP-520

Condition: good (used), Machinery from honey processing factory. DC Norris hotrooms, DC Norris settling tanks, DC Norris holding tanks, crystallised tanks, super seed tanks, pump, filter sets, various filling lines to fill squeezy bottles, glass jars and plastic buckets. Klodpfxepcibms Ancsr

Condition: excellent (used), Storti RM 500 edger - Italian production - year of production 1993 - electric spacing of discs TECHNICAL PARAMETERS: - cutting width max 435 mm - cutting height max 170 mm - engine power 2 x 22kW - max element width 600 mm - minimum material length 800 mm - max disc diameter 600 mm - spindle diameter 40 mm - two upper pulling rollers - one upper pressure roller - roller motor power 2 x 1.1 kW - roller pressure with automatic jump - seven bottom pulling toothed rollers - electric disc adjustment - two lasers - feed speed 25 and 50 m/min - feeding table 2950 mm Kedpfx Aok Talponcslr - receiving table 3000 mm - drive rollers D100 mm - power of the roller feed motor 2 x 1.5 kW Transport dimensions 500x240x180 cm weight 3500 kg

Condition: excellent (used), 200m3 stainless steel tanks Number of items: 3 180m3 stainless steel tanks The diameter is 4.70m Height without legs is 14m 4,1mm wall thickness 5,1 bottom thickness We offer transport with our specialized trailer to every region of Europe! Klodpfx Ansfngl Nocor

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: Ksdjwp Rqfspfx Ancelr • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Condition: like new (used), Year of construction: 2022, operating hours: 945 h, functionality: fully functional, total height: 4,100 mm, total length: 12,000 mm, total width: 6,000 mm, power: 50 kW (67.98 HP), input voltage: 400 V, Equipment: documentation/manual, Ecokraft Granulation Line Offered for sale due to increased production requirements, as we have invested in a larger machine. Please be assured that this machine is in excellent condition and ready to meet your production needs. Contact us for pricing. Technical details: 1 High-performance knife mill (45 kW) with soundproof cabin, type SMC 500/700 10 Spare standard rotor knives 1 Dust extractor, type SMU 45 (4500 m³/h) with discharge container (year 2023) 1 Double-screw hopper (6 m³) with 2 extraction belts 1 Dosing system RP 18 DUO (year 2023) 2 Pellet presses RP 18 (18.5 kW), 925 and 942 operating hours 1 Pneumatic lubrication system for 18 kg bucket 2 Central lubrication systems 2 Digital water dosing pumps (803/54 litres) 2 FT screeners and extraction belts Kedpfx Asygm Ersncjlr 2 Big bag stands for fine product collection 2 Big bag stands for cooling 1 Electric control cabinet

Condition: excellent (used), CPM 2000 granulator, 90kW engine die diameter 410mm Kedpowcdpnefx Ancslr We have several pieces

Condition: used, Year of construction: 2004, Hydr. reversing Bale size 0.8 - 180 m / Kjdpfxsrxta Eo Ancslr

Condition: new, Year of construction: 2025, Automatic snap lock roof panel machine Sl-1 auto is designed by our company for the self-locking roof panels production in automatic mode. This machine forms a roof lock by rolling with the help of special rolling rolls. At the same time while rolling it cuts fastening holes for roof panel’s fixation. Automatic snap lock roof panel machine SL-1 auto consist of: - Roll forming part, which directly forms the desired profile of the panel with the help of rolling rollers. The machine is equipped with width easy adjustable system - to change the width; you just need to turn a special adjustment wheel. The rolling machine has 10 pairs of forming rolls to form a click-seam lock. It has special tool to cut fastening holes in panels. - Automatization system of machine, with the main elements as follows: automatic control panel, manual control panel, control cabinet, measuring wheel. With the help of this system, machine operator can program it to perform metal rolling and cutting operations in automatic mode. It is easy to set the number of panels for rolling and their lengths, so you just need to feed metal into machine, and it will roll panels of click-seam of the desired length and quantity in automatic mode. It is possible to perform several tasks (multi-tasking). If use manual control panel you can check each operation step of the automatic mode before put it to full automatic process. - Guillotine shear, designed for cutting click panels of various widths. The special configuration of blades makes it possible to cut such profile and to get high quality final product. Shear system has electric motor to make cutting operations easy. Kodpfx Aon Hqmmencolr As an additional equipment for the machine, we offer: - metal uncoiler for convenient installation of roll metal and feeding it into the machine. - full automatic decoiler to make roll forming process maximum automatic. - ribbed panel rolls, to form additional ribs to the click-fold panels, so it gets more interesting look to the roof and increasing the rigidity of the system. - ribbed panel forming machine RPFM (microwave panels machine) to form microwaves on roofing panels. Due to its low weight, the automatic roll forming machine for self-locking panels SL-1 auto can be used in the construction of civil and industrial facilities, in factory workshops and workshops, as well as directly on the roofing site. Using of machine close to the place of installation avoids transportation costs and the associated risk of damage to the roofing sheets. The high of snap lock roof panel profile when installed is 26mm: As an option, we can also make machine for 31mm lock high production: The maximum workpiece width for rolling can be 700mm. The minimum workpiece width is 250mm. Automatic snap lock roof panel machine Sl-1 auto has special protective cover that prevents foreign objects from getting to working part of machine. So snap lock automatic roll forming machine SL-1 auto is convenient to use with the help of automatic mode so you can minimize operator’s work and to get high-quality roofing panels with high productivity.

Condition: good (used), Year of construction: 2021, machine/vehicle number: 2105261-01, Offer 25388 Technical Data: - Load capacity 1000 kg - Electric chain hoist VETTER - 2 lifting speeds 4 + 1 m/min - Jib outreach approx. 2000 mm - Jib arm IPE 220 - Hook height approx. 2700 mm - Slewing radius 360° - Total height approx. 3300 mm - Baseplate of column / pedestal approx. 1400 x 1400 mm - Total length approx. 2900 mm - Total weight approx. 4400 kg Kjdpfext Iq Iex Ancslr - Connection 400 V / 32 A

Condition: good (used), Year of construction: 2007, functionality: fully functional, Pellet production line based on Italian producer Zepi pellet press, hammer mill, pellet cooler and sifter. Kedevx S Ryjpfx Ancjlr Machines are really powerful and reliable. Some parts like hammer mill are completely refurbished. Year of production 2007.