Pallet production machine

ENGELER EPAL Production Line

Condition: new, Year of construction: 2025, COMPACT CONCRETE BATCHING PLANT C60-SNG L GENERAL Plant Type : Compact Concrete Plant with Single Shaft Mixer Plant Capacity : 60m³/hour freshly compressed concrete Mixer Capacity : 1500/1000 lt (1m³ Compressed Concrete) Total Motor Power : 110kw Standard Value can be changed depending on Equipment.. Voltage/Frequency : 380V/50Hz Standard Value. Transport : TWO containers. The installation and startup of the plant is under our responsibility. Iodoflz Hfjpfx Adnoa We provide excellent after-sales service. 24/7 SERVICES. REMOTE CONTROL SERVICE. Exporting more than 1000 Concrete Batching Plants to more than 90 Countries all over the world. * LOW SHIPMENT COST(TWO 40F-OT containers or TWO standart trailers) * QUICK INSTALLATION * EASY AND SIMPLE USE DETAILS: Compacted concrete capacity: 60 m³/h Air Compressor Capacity : 950 lt/min Aggregate Hopper : 60 m³ / 80 m³ Mixer Type : SINGLE Shaft (1 m³). 1500/1000 lt capacity Aggregate Transfer Belt : 800x14.500 mm Weighbridges: Aggregate/ Cement /Water/ Additives OPTIONS: *Cement Silo: 75-100-150-200-500 tons *Cement Silo Equipment and Screw Conveyor. Central Lubrication System Brand : ILC (made in italy) Mixer body Plates : Manganese (it can manufacture 50.000m3-450.000m3) Mixer Internal Linings (Wear Plates) : Ni- hard special hard cast material Discharging in Emergency Situations : manual Emergency Situation hand pump Emergency Stop Button available. Digital Mixer Control System (alarm) Automatic lubrication system monitor feature on pc Control System: Full automatic pc - plc – printer. Unlimited users Remote access Unlimited prescriptions and customer registration Retrospective reporting English- Russian- French- Arabic-German-Spanish languages are available. Switching materials used in the MCC dashboard are SIEMENS Back off available.

Condition: excellent (used), Fully automatic line for poles/stakes production, Infeed conveyor, step feeder, chain conveyor , 2 head rounding machine, separation unit, cross cut sizing saw, pointing/chamfering unit, also possible to make chamfer/chamfer or 2 poles same time pointing chamfer and chamfer/chamfer. max diameter 120 mm Ijdetyv S Ijpfx Adnea

Year of construction: 2012, condition: good (used), Manufacturer: Gipo AG Type: B 1370 Year of manufacture: 2012 Inlet size: 1.320 x 680mm Iodpfxsilh Efe Adnsa Included: – Frame – Pre-Screen – Electrical motors for Crusher and Pre-screen Spare jaws in stock!

Condition: good (used), Year of construction: 2004, spindle passage 60 mm turning length 280 mm control 840 D Siemens turning speed range - drive spindle 6300 U/min drive capacity - spindle motor 3,3 kW turret 1 Scheibenrevolver no. of tools in turret 1 8 worktool system DIN 69 880 / 25mm x-travel 90 mm z-travel 280 mm feed power 5500 N rapid traverse 24 m/min power capacity - milling spindle 5000 kW turret Schwalbenschwanz no. of tools in turret 2 6 x-travel 81 mm z-travel 80 mm feed power 5500 N rapid traverse X-axis 16 m/min rapid traverse Z-axis 24 m/min weight of the machine ca. 2,5 t dimensions of the machine ca. 6,0 x 2,0 x 2,0 m TThe INDEX ABC machine is a compact lathe for short turned parts made from bar stock. It has an inclined bed design with two independent turrets. The top turret is primarily intended for internal machining and machining, while the lower turret is used for external machining. The turret arrangement enables collision-safe working and simple programming programming with high tool availability. The large free space in the working area enables a favourable chip fall The work area consists of two turrets: ‘Turret 1’ - Disc turret with 7 radially arranged tool holders Ø 25 mm DIN 69880 and a holder for the reinforced synchronised spindle on the turret station 8. tools with 1’ holders can also be used with an equalising holder can also be used. The turret is prepared for the V-ledge system. - Synchronised spindle for rear end machining, simultaneous parallel machining with main spindle. Ø42 collet chuck or 3-jaw gripper chuck for internal and external clamping and external clamping. Jaw stroke 0.6 mm. Clamping diameter (external) 75 mm. - Back-boring device. Starting from the centre of the working spindle in clockwise direction, 3 stationary back-boring tools are back boring tools are arranged. These are Iodpfxowbvhae Adnoa located in the pitch circle of the synchronised spindle. The back machining is carried out simultaneously with the machining on the the working spindle. Two additional tools can also be used, can be equipped with a tool feed drive. ‘Revolver 2’ - Turret with 6 symmetrical dovetail holders and each station with 2 locating holes for cylindrical shank per station. The following tool systems can be used. - stationary tools that can be moved in the Z direction - Driven tools with cylindrical shank Ø25 (can be used in two positions per station) can be used) - including bar loader LM 3200 - + various accessories (various Ø guide half-shells/tool holders) Technical data: - Material bar diameter: (Ø 25 / Ø 36 / Ø 52)- --> round Ø 8 - 25.4 / 8 - 36 / 8 - 52 mm --> square SW Ø 6 - 14 / 6 - 20 / 6 - 20 mm --> hexagon SW Ø 7 - 22 / 7 - 30 / 7 - 41 mm --> octagonal SW Ø 7 - 22 / 7 - 32 / 7 - 40 mm --> bar length max. 3200 mm --> from bars Ø 25 mm, min. 2,500 mm --> up to rods Ø 25 mm, min. 1,500 mm --> bar support = approx. 300 = 6 bars Ø 52 mm Mass (bar loader) = 700 kg

Condition: used, Krones 48,000-bottle-per-hour (BPH) complete bottling line for non-carbonated products is designed for PET containers with sizes of 0.38 L and 0.55 L, using volumetric filling and 30/25 type necks. The line includes several key components, including a 2015 Krones Contiform blow molding machine with 22 cavities, a 2015 Krones Contifeed preform conveyor, and a 2015 Krones Contiform 50-20 filling monoblock. The system also includes 2021 Hawkeye Smart C-3000 and 2020 Krones Linadry air dryers, 2021 Krones labeling machines, and several other machines for inspection, packaging, shrink wrapping, and palletizing. This used bottling line is ready to use and monitors the operational status of each machine monthly to ensure maximum efficiency and reliability. Krones Contiform 2015 blow molding machine with 22 cavities of Used Complete Bottling Line Krones for Still products 48000 bph The Krones Contiform 2015 blow molding machine with 22 cavities of this krones line is designed for high-speed production of PET containers, with an output capacity of up to 48,000 bottles per hour. The Contiform uses an optimized linear infrared heating module for preforms up to 160 mm in length and 48.5 mm in support ledge diameter. This model features advanced blow molding technology, enabling production of up to 2,750 containers per cavity per hour, while reducing compressed air consumption by 15% compared to previous models. The intelligent control system of the Contiform ensures consistent bottle quality through various optional modules, such as the Prejet preform internal cleaning system and the PET-View inspection system for integrated quality control of preforms and containers. The machine includes a blowing module with an advanced mold clamping mechanism, eliminating the need for a pressure pad and allowing the production of bottles up to 2.0 liters in volume on a reduced-size blowing module, occupying 22% less space than previous models. The active transfer system with five-point heating mandrels in the linear oven and reduced number of internal horizontal transfer points for preforms and containers improve operational efficiency. The high-precision Monotec servo motors with real-time synchronization ensure precise and reliable handling of preforms throughout the blow molding process. Iodpfxjvlwpuj Adnsa Krones Contifeed 2015 preform conveyor The Krones Contifeed 2015 preform conveyor is designed to ensure continuous and consistent feeding of preforms to the blow molding machine. The Contifeed system supports various types of preforms, including lightweight, standard, and heavy, and is available in three models suited to the respective blow molder capacity. The feed rail variants include a gravity system for common preforms and an air-assisted system, ideal for lightweight preforms and high-speed applications. The Contifeed features automatic adjustment for quick format changes, hygienic design, and a soft-tilting preform tipper for gentle preform feeding.

Condition: used, Complete sawmill, for now only for sale as a whole. Reservation for individual purchase possible at any time. Sawmill consisting of: 01. Log infeed 3-strand Mayrhofer with separator with inserter Total length: 8 meters Width: 3.5 meters 02. Fully hydraulic carriage Mayrhofer with auxiliary carriage with rails Track gauge: 90 cm 03. Pini & Kay FN65 HH frame saw Passage width: 650 mm Drive motor: 33 kW With saw blades With suspension With intermediate gear With splitting wedge With scraper conveyor for sawdust 04. Frame roller table with 3 extractors and steep conveyor Length: 8.5 meters Width: 1.8 meters Roller width: 1.6 meters 05. Extraction table 4-strand Length: 4.5 meters Width: 2 meters 06. Steep conveyor 4-strand Conveyor length: 3.6 meters Width: 3.8 meters 07. Double edger Paul KME 2 0-line left Right-hand machine Drive motor: 22 kW With 2 under-table crosscut saws With hydraulic roller lifting With hydraulic width adjustment With sliver separator With extraction table/cross conveyor for slivers With elevator for main material With conveyor belt With spiral roller conveyor With manual box sorting (10 boxes/carts) 08. Sharpening room consisting of: Frame saw sharpener Vollmer CNHV 1978 Set device Loroch SGB 6 1983 09. Drying chamber Vanicek Internal dimensions: Length: 4.53 m Width: 9.16 m Height: 4.4 m External dimensions: Length: 4.6 m Width: 9.3 m Height: 4.62 m Iodpfxswptuye Adnoa Location: Austria, near Vienna

Condition: like new (used), Year of construction: 2022, Sunthinks HP Onepass digital printer is highly cost-effective printer specially designed for printing on corrugated cardboard. * Model: Sunthinks SC1290 * Printhead type: HP heads (6 pcs) * Maximum resolution 1200x300DPI; 1200x600DPI; 1200x1200DPI * Printing speed 5/15/30 meters per minute Isdsu T I Npopfx Adnsa * Print size 1290mm * Sheet size 2500x9999 Printer is almost new. Available immediately directly from owner!

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 2,400 mm, total length: 15,000 mm, total height: 2,800 mm, pressure: 8 bar, power: 10.9 kW (14.82 HP), empty load weight: 6,400 kg, input voltage: 400 V, filling weight (min.): 200 g, filling weight (max.): 5,000 g, XFR 1000 Liquid Media Filling Line A fully automated liquid media filling line featuring robotic capping, automated handle placement, dual-sided labelling, optical quality control, and pallet wrapping. An end-to-end solution covering the entire process, from bottle blowing to the palletizing and wrapping of filled bottles. XFR LIQUILOAD It enables optimal filling speeds for bottles of varying characteristics and liquids of different viscosities. The machine’s easy configuration for different bottle types and corresponding liquids ensures quick adaptation to market demands. • Capability to increase the number of nozzles • Nozzles designed to prevent foaming of the liquid • 800 to 4,000 filled bottles per hour • Servo-driven nozzle positioning • Easy configuration of new programs XFR BOTTLELOCK The machine segment performs fully automated capping of filled bottles. Designed to accommodate various cap types, simplifying machine adjustments for seamless operation. • Cap type adaptability • Robotic bottle capping • Optical inspection • 800 to 2,000 capped bottles per hour XFR HANDLEGRIP The automatic robotic placement of handles on bottles, while they move continuously towards the labeling machine, ensures seamless and uninterrupted operation. • Adaptability to different handle types • Robotic handle application on bottles • Optical inspection for handle orientation verification • Capability to attach handles with a funnel XFR LABELFLOW The machine applies the appropriate labels to both sides of the bottle, creating a finished appearance. In the next phase, the labelled bottles undergo optical inspection. • HERMA labelling system • Simplified label type changeover • Servo-driven for enhanced labeling precision • Monitoring of remaining labels with operator alerts OPTIONAL PARTS: 1. OPTICAL INSPECTION Industrial cameras with integrated lighting and pneumatic ejection system. 2. PICK AND PLACE ROBOT 6-axis robot equipped with a 160 kg gripper for the current handling of 8 bottles onto a Euro pallet. 3. PALLETIZING Palletizer with automatic pallet feeding via a roller conveyor to the bottle stacking area. 4. PALLET WRAPPING The automatic pallet wrapper applies stretch film to palletized products, securing them for easier and safer transport. 5. FINISHED GOODS STORAGE Finished pallets are transported to the warehouse via a metal roller conveyor. 6. REMOTE CUSTOMER SUPPORT Iodsuq Nv Topfx Adnsa We provide remote support to ensure optimal machine performance. 7. ADDITIONAL OPTIONS Automated data integration with ERP systems; RFID login; NFC detection of parts and tools; magnetically mounted tools. 8. MACHINE CONFIGURATION Segments can operate independently or as an integrated solution, depending on the client's specific needs. Proton EE-Elektronika d.o.o. MachinFlex d.o.o.

Condition: ready for operation (used), Year of construction: 2002, Extruders and oil screw presses for soybean processing, obtaining oil and soybean cake. There are two extruders and two presses. One extruder and one press work in tandem and form a pressing line. The motor power of the press is 22 kW and the power of the extruder is 55 kW. the capacity of one line is 500-800kg/h The price refers to one line (exstruder+press) Iodetxinaopfx Adnsa

Condition: good (used), functionality: fully functional, Used Bottling Line | Used Beverage Line | Soft Drinks NP 625 | ASEPTIC PET BOTTLING LINE Year: 1998 - 1999 Speed: 18,000 Bph 1.5L Line consisting of: SIDEL Blower Model: SBO 16/16 ROUE Number of cavities: 16 Type: rotary CHILLER AND COMPRESSOR NOT INCLUDED Preform elevator Preform rearranger PROCOMAC monoblock Type: ASECTIC Rinser Gravity filler Capper Cap type: prethreaded plastic Iodjtu Hy Nopfx Adnoa Sleevering machine Type: rotary Long-run warehouse Steam tunnel OCME Bundler Film-throwing type OCME Palletizer Type: push type Film-laying system Pallet magazine OCME pallet wrapper