Used Worm for sale (324)

Condition: used, Year of construction: 2007, Overview This KHS Innoclean single-end bottle washer for returnable glass bottles was built in 2007. It cleans and de-labels empty bottles before filling: bottles are pushed into carrier-basket cells, run on heavy roller chains through a pre-soak, two pre-warming baths, the main caustic soak with under- and over-caustic label flushing, and three water spray zones, then handed back onto the bottle conveyor at discharge. Nineteen bottles run across the machine width in 4,275 cells; output range and design output are given below under Technical data. At design output, total dwell time is 18.7 minutes, including 10.8 minutes of caustic contact. KHS modernised the drive and operator station in 2022: Triple-i-Drive and a capacitive multi-touch panel with RFID login, detailed under Equipment. A KHS manual supplement dated November 2022 covers the upgrade. Technical data - Manufacturer: KHS - Model: Innoclean - Machine type: single-end bottle washer (soaker) - Year of manufacture: 2007 - Drive and control modernisation by KHS: 2022 - Output range: 2,800 - 14,500 bottles/h - Design output: 13,200 bottles/h, 0.75 l glass bottle, 0.68 kg - Bottles across machine width: 19 - Carrier baskets: 225, of which 217 loaded - Cell pitch: 105 mm; carrier chain pitch 169 mm - Bottle diameter: 54.0 - 89.5 mm (plastic cells) - Bottle height: 180 - 340 mm - Bath volumes: main caustic soak 23.0 m³, pre-soaks 0.9 and 1.1 m³, after-caustic 0.3 m³, spray zones 0.4 m³ each - Power supply: 400 V, 50 Hz, TN-S, 113 A nominal, 125 A slow fuse; control voltage 24 V DC - Water consumption: 3.56 m³/h, 270 ml per bottle - Compressed air: 1.0 Nm³/h at 3 bar Dcjdpezzz Ivsfx Aiiep - Overall dimensions: 11,040 x 4,470 x H 3,438 mm (incl. infeed table) - Conveyor heights: infeed 720 mm, discharge 1,690 mm - Weight approx.: 33.5 t machine, 62.6 t operating - Largest transport segment: 4,410 x 4,100 x 3,370 mm, approx. 7.3 t - Enclosure type 12; CE marked Equipment - Triple-i-Drive: worm gearboxes with individual geared motors, each on its own servo inverter with synchronisation and individual overload protection - Servo-driven infeed and discharge segments with brake motors - Capacitive multi-touch operator panel, graphical interface with component views, RFID card reader - Gearbox monitoring with torque protection - Two pre-warming and main caustic immersion baths, with under- and over-caustic label flushing and bottle base spray-off - Automatic label discharge over a full-width sieve belt with brush take-off - Automatic level control and caustic dosing; sieve tub filtration and after-caustic circuit for long caustic service life - Three water spray zones, internal and external, with rotating fresh-water spray - Vapour extraction and plate heat exchanger - Siemens SIMOTION D and SINAMICS drive cabinet - Original KHS documentation: operating manual, 2022 supplement, spare parts list Condition Used, technically complete. Still installed and under power at its production site; photographs and video show it running. Availability Immediately. The machine will be dismantled and relocated to Germany. Viewing by arrangement; dismantling, loading and transport can be quoted on request.

Condition: used, mileage: 262,581 km, power: 170 kW (231.14 HP), first registration: 08/2007, fuel type: diesel, empty load weight: 6,800 kg, maximum load weight: 5,190 kg, overall weight: 11,990 kg, axle configuration: 4x4, wheelbase: 3,600 mm, brakes: engine braking, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: steel, number of seats: 2, Equipment: ABS, air conditioning, all wheel drive, cabin, differential lock, onboard computer, power assisted steering, seat heater, trailer coupling, * German vehicle * Condition: see photos * Only 15,307 operating hours * Premium salt spreader GEMEINER type 3000TCFS 3m3 * Usable volume: 3.0 m³ * Snow plow blade not included; we can supply one if required * Clearing width: 3,300 mm * Vario Pilot dual steering system * Hydrostatic drive system (Easy Drive) * 6-cylinder * Municipal control system * Tipping hydraulics * Trailer coupling Dcsdpfevhqvmjx Aiiop * Towing capacity: 28,010 kg * Trailer hydraulics * Hydraulic front mounting plate * Front hydraulics * Front PTO * 4x4 all-wheel drive * Winter service lighting * Air conditioning * Cruise control * Worm drive * Engine brake * Joystick control * Heated windscreen * Air-suspended driver's seat with seat heating * Electrically heated, adjustable mirrors * Electric windows * Storage compartments * Anti-lock braking system (ABS) * Raised exhaust system * Leaf suspension * Wheelbase: 3,600 mm * Gross vehicle weight (GVW): 11,990 kg * Unladen weight: 6,800 kg * Payload: 5,190 kg * Sale to businesses/traders only, plus 19% VAT If a new TÜV inspection is required, we will be happy to provide an offer from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new safety inspection (SP), without new accident prevention regulation (UVV). More trucks can be found on our homepage at: We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspection of the goods to avoid any misunderstandings regarding condition and suitability. Viewing and inspection appointments are possible at any time by prior arrangement and are expressly encouraged. All information is provided without guarantee. No liability is accepted for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale, and errors.

Condition: good (used), Year of construction: 2005, working width: 1,000 mm, Deburring machine Fab. LISSMAC Typ. SBM-B 1000 Year 2005 Technical data Make: LISSMAC Type: SBM-B 1000 Year of construction: 2005 Passage width: 1000 mm Sheet thickness: max. 20 mm Dsdpfjvgb Hgex Aiiecp Sheet size min. length: 150 mm Sheet size min. width: 100 mm Speed: 1400 rpm Brush motor power: 4 x 7.5 kW Dimensions: approx. L 2.20 x W 1.50 x H 1.50 m Weight: approx. 1.5 t Equipment - Automatic material feed-through - Infinitely variable feed rate 0-10 m/min - Sheet thickness adjustment: Hand crank with worm gear and scale, infinitely variable - Brush depth adjustment: Hand crank with worm gear and scale, infinitely variable - Various accessories - Operating instructions All information without guarantee. A demonstration is possible at any time in our showroom.

Year of construction: 2025, condition: new, New machine Dsdpfx Aiow Nafkoiecp Year of manufacture: 2025 Features and technical specifications: Fully equipped in standard version with: - Robust, torsion-free steel frame, welded and bolted construction - Lamella pressure beam TOP with 6 elements, lamella pressure beam SIDE with 5 elements - Lamella pressure beams with proven tolerance compensation system (Ganner system) for tightly compressed carcass joints - Counter-pressure surfaces (side pressure wall, base) are 38 mm thick, coated, continuous support plates - Continuous pressing surface, height 95 mm, on lower vertical pressure beam - Electromechanical adjustment of both pressure beams via precision trapezoidal thread spindles (with increased lead and concentricity accuracy) and high-performance ball nuts with grease reservoir - The pressing process is carried out electromotorically, via 2 independent worm gear motors (2 x 0.75 kW) - Pressing force of the pressure beams is infinitely variable and electronically controlled by 2 potentiometers, regulated via frequency inverter, ensuring absolutely wear-free force control - Pressing force for horizontal pressure beam: min. 500 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing force for vertical pressure beam: min. 300 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing and adjustment speed of the beams with fine positioning, using 3-stage selector switch: 5 / 10 / 25 mm/second - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcasses at 45° - Simplest operation via 6 separate push buttons, 8 movement cycles selectable via control panel - Freely adjustable press time preselection 0-30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressure beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm Including surcharge for rapid traverse speed, for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec, the sensors can be deactivated for pressing special components Including a set of machine feet for 500 mm working height Location: Flörsheim Availability: Short-term

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 2,300 mm, total width: 1,300 mm, total length: 2,500 mm, Our innovative welding cell maximizes the efficiency and flexibility of your production. Equipped with a Kuka KR6 robot and a Dinse welding torch, it offers two processing stations for a continuous production chain. The KRC4 control cabinet controls the robot precisely and ensures maximum reliability and seamless integration into modern production systems. The user-friendly interface makes programming easier and ensures consistently high welding quality. This compact solution sustainably increases productivity and reduces costs Cell: ◦ 2.50 m x 1.30 m x 2.30 m ◦ 2 processing stations approx. 80 cm x 80 cm ◦ Can be combined with the desired welding machine on request Fronius, Lorch etc... ◦ Immediately available ◦ Location Worms in Rhineland-Palatinate Control cabinet: ◦ Controller: KRC 4 Compact ◦ Hard drive: SSD ◦ Interface: USB 3.0, GbE, DVI-I ◦ Ambient temperature: +5°C to +45°C Robot: ◦ Kuka KR-6 R900 sixx Agilus series ◦ 6 axes ◦ Max. payload: 6 kg ◦ Range: 0.9 m Dedpfsvz Tv Nsx Aiiscp ◦ Repeatability: ± 0.02 mm ◦ Year of manufacture 2017 Visit our website and let's achieve your production goals together!

Condition: used, mileage: 101,381 km, power: 107 kW (145.48 HP), first registration: 04/2013, fuel type: diesel, empty load weight: 2,915 kg, maximum load weight: 3,085 kg, overall weight: 6,000 kg, axle configuration: 4x4, wheelbase: 2,200 mm, brakes: other, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 2, loading space length: 1,770 mm, loading space width: 1,114 mm, loading space height: 380 mm, operating hours: 8,519 h, Equipment: ABS, additional headlights, all wheel drive, cabin, crane, differential lock, immobilizer system, onboard computer, power assisted steering, soot filter, trailer coupling, * German vehicle * One owner * Complete documentation with inspection reports available * 8,519 operating hours * The Kiefer Boki is in visually very good condition * Model: Kiefer Boki 1151B with COPMA loader crane mounted at the rear and folded * 4x4 all-wheel drive * Front lift with municipal hydraulics * Loader crane COPMA 35.3 with 3 hydraulic extensions * Lifting capacities: at 2.75 m = 995 kg, 3.11 m = 885 kg, 4.44 m = 600 kg, 5.77 m = 450 kg, 7.10 m = 355 kg, 8.45 m = 250 kg * Hook height: 10.5 meters * 5+6 control circuits * Rotary servo Dcjdpfjxxbqfjx Aiijp * Two clamshell buckets available at additional cost * 2 hydraulic outriggers * 3-way tipper * Body dimensions: L=1,770 mm x W=1,114 mm x H=380 mm * Trailer coupling * Towing capacity: 3,500 kg * Snow plow blade available at additional cost * Winter service lighting * 5-speed gearbox * Cab with 2 seats * Worm drive * Heated windshield * Joystick control * Rotating beacon lights * ABS * Differential lock * Leaf spring suspension * Wheelbase: 2,250 mm * Gross vehicle weight (GVW): 6,000 kg * Empty weight: 2,915 kg * Payload: 3,085 kg * In case of sale to traders or for export (both inside and outside the EU), German commercial code applies. If a new TÜV inspection is required, we are happy to provide a quote from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, DGUV certification, safety inspection (SP), or UVV regulation inspection. You can find more trucks on our website at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspecting the goods to avoid misunderstandings about their condition and suitability on the buyer's side. Viewings and inspections are possible at any time by appointment and are expressly desired. All information is provided without guarantee. No liability for errors or incorrect information is assumed. The buyer is obliged to independently verify the condition and features of the goods/vehicles. We reserve the right to change, prior sale, and errors.

Condition: new, new ! all stainless steel with 160 mm-head Dodpfx Ae Agmrpjiiscp 40 kW Capacity: ± 2.500 kg/h grinder for fresh and frozen meat: 0°C to -8°C dimensions (l x w x h) : 3.000 x 2.000 x 2.000 mm + Loader for eurobins + Tool trolley for 160 mm grinder The automatic cross-feed meat grinder is a robust and versatile machine, designed for the efficient processing of both fresh and frozen meat down to -8 °C, as well as other food products. Thanks to its integrated angular feed system, the product is delivered evenly and in a controlled manner, resulting in consistent and high-quality grinding. The machine is constructed entirely from stainless steel, including the cutting worm, feeding worm, and worm housing, ensuring optimal hygiene, durability, and easy cleaning. Operation is controlled via an electronic control panel, allowing the user to select between two speeds for both the feeding worm and the cutting worm. Combined with various knife configurations, this enables a wide range of cuts, from coarse to ultra-fine grinding. For operator safety, the grinder is equipped with an observation platform that automatically stops the machine when opened, as well as a safety rail around the feeding area that immediately halts operation upon contact. Optionally, the grinder can be fitted with a loading system for 200-liter standard meat carts. This system is available in two versions: a column-type or a hydraulic side-loading variant, depending on the specific needs of the user.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 2018/219, hole diameter: 75 mm, number of planer blades: 6, operating speed: 6 mm/s, year of last overhaul: 2018, For sale is a very fast and complete Cambio debarking system! In 2018, the machine was completely overhauled, and since then, it has been professionally maintained and equipped with a new knife ring with 6 cutting knives! The system can be directly integrated into your existing mechanization! TECHNICAL DETAILS Maximum log diameter: Ø 750 mm Minimum log diameter: 11 cm Shortest log length without an additional feed system: 3 m Shortest log length with an additional feed system: 1.5 m Maximum feed speed: 100 m/min MACHINE DETAILS Rotor motor: 55 kW Feed motor: 11 kW Hydraulic power: 1.5 kW Rotor speed: 220 rpm at 50 Hz Rotor opening: 80 cm Debarking rotor: 6-knife rotor Dcsdpfozx Eaqjx Aiiep Weight: 10,500 kg EQUIPMENT Complete infeed system Complete outfeed system Electrical system Hydraulics for the infeed rollers New 6-knife rotor from the 2018 overhaul Complete debarking system for integration into an existing mechanization Centering device ZV – 75/2 MA Number of horizontal conical rollers: 2 Drive power per SEW worm gear motor: 1.5 kW EQUIPMENT 2 horizontal conical rollers mounted in pneumatically actuated swivel arms SEW worm gear motors with torque supports in a solid steel design Heavy-duty inlet hopper Complete sensor system Outfeed system AW 800 Drive power: 3.0 kW EQUIPMENT Drive via SEW spur gear motor Machine frame made of welded rectangular tubes for supporting additional machine components Hydraulic shock absorbers

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, rotational speed (max.): 1,750 rpm, rotational speed (min.): 1,450 rpm, Equipment: type plate available, Refurbished Landert motor Manufacturer: Landert Motoren AG Bülach Type 132S-RFA4A, 1450/1750 rpm, 400V, 50/60 Hz, 5.5 kW (Worm gear drive) Dedpfx Aew Rn Hxoiiscp Nameplate present Price negotiable Our asking price is €1,150.00 net ex works, plus packaging costs. All technical specifications are subject to printing errors and inaccuracies. Sale exclusively to countries within the EU.

Condition: used, maximum load weight: 7,000 kg, overall weight: 9,900 kg, axle configuration: 2 axles, first registration: 09/2013, loading space length: 6,200 mm, loading space width: 2,480 mm, loading space height: 380 mm, Equipment: * Dimensions: L 6,200 mm x W 2,480 mm x H 380 mm, * BPW axles, * Height-adjustable drawbar, * Leaf spring suspension, Dcedsz Dl Najpfx Aiisp * Recessed lashing rails, Other: * Payload 7.0 t according to ZLB, * Weight reduction from 11.9 t to 9.9 t without technical modification, Since 1972, we have been your reliable partner for everything related to automobiles/commercial vehicles in 28832 Achim, near the Bremen motorway junction. Behnke Commercial Vehicle Center always has approximately 200 vehicles in stock, including vans, commercial vehicles, and construction machinery! We continuously offer attractive financing options at favorable special conditions. If you are interested, we will be happy to prepare an individual offer for you! We are happy to accept your commercial vehicle/construction machinery in part exchange. If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Our offer generally does not include a new TÜV inspection. Delivery of your "new" commercial vehicle is possible through our external partners for an additional charge. The information provided in advertisements, on the internet, on price tags, and in images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typographical errors and data transmission errors. The listed equipment may need to be checked separately. Errors and prior sales excepted.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, pressing force: 4,000 t, stroke length: 180 mm, throat depth: 500 mm, overall weight: 28,000 kg, controller model: Siemens S7-300, The machine underwent a major overhaul in 2007! The following modifications were carried out on the single-column eccentric press PEE 400: Conversion of the press drive to an adjustable drive with 15-45 strokes of the press ram Conversion of the clutch and brake to a pneumatically actuated Ortlinghaus clutch-brake combination Adjustment of the pinion shaft, flywheel, and bearing cover to the pneumatically actuated clutch-brake combinations Replacement of the rolling bearings for the pinion shaft and flywheel bearing Replacement of all sealing elements and wear parts for the drive Replacement of the seals for the compensator cylinder Replacement of the V-belts for the flywheel drive Replacement of the entire electrical control system Installation of a stroke adjustment mechanism Modification of the safety device Mounting of a tie rod to reduce frame deflection under press force Replacement of the worm gear for ram adjustment, pressure spindle, spindle nut, and pressure ring Refurbishment of the ram guide rails Replacement of the die plate and its support Hydraulics Pneumatics Lubrication Hydraulic pull-down cushion in the press table Tool mounting arms for attaching the press tool Tool lever strips in the table TECHNICAL DETAILS Pressing force: 4,000 kN Adjustable stroke: 30–180 mm Adjustable stroke rate per minute (continuous operation): 15–45 /min Ram adjustment: 150 mm Overhang: 500 mm Ram area (width × depth): 1,200 × 800 mm Table area (width × depth): 1,600 × 1,000 mm Maximum distance between table and ram area: 625 mm MACHINE DETAILS Control: Siemens S7-300 Motor power: 55 kW Motor speed: 1,500 rpm Hydraulic pull-down cushion Piston diameter: 110 mm Piston rod diameter: 90 mm Effective piston area: 95 cm² Pull-down cushion diameter: 230 mm Adjustable counterforce: 10–250 kN Usable pull-down cushion stroke: 90 mm Speed of the pull-down cushion during extension: max. 65 mm/s Hydraulic system Flow rate of the pull-down cushion pump: 29 l/min Drive power of the main pump: 7.5 kW Oil capacity in the tank: 250 l Flow rate of the circulation pump: 65 l/min Djdpfjzmfnqjx Aiiocp Drive power of the circulation pump: 1.5 kW Operating pressure for clutch and brake: 5 bar Operating pressure for ram weight compensation: 5 bar Total machine weight: 28,000 kg

Condition: excellent (used), Gea combiGrind 200 frozen block grinder. In lovely condition. Has been fully checked over. stainless steel worms. Dcodpjy U Hriefx Aiiep

Condition: used, Year of construction: 1997, Technical details: max. module: 7 weight of the machine ca.: 5 t worm grinding diameter: 280-350 mm width of grinding worm: 84-104 mm min. number of teeth: 6 max. number of teeth: 600 max. top circle diameter: 360 mm max. workpiece weight: 60 kg without filter * Dcjdpfx Aijx Aq Egjiep

Condition: used, Year of construction: 2000, Overview  This complete PET bottling line was manufactured between 2000 and 2012 by a group of reputable European manufacturers, including SIG Corpoplast, KHS, Sacmi, Kisters, Paxona, and others. The line is suitable for still and carbonated soft drinks and includes a blow moulder, filler, labeller, packer, and various conveyor and inspection systems. The line reaches up to 36,000 bph at 1.5L and is available promptly. All machines are well maintained and include original components and relevant peripheral equipment. Technical data  - Capacity: - 36,000 bph at 1.5L water - 35,000 bph at 1.5L soft drinks (sweet) - 32,000 bph at 1.5L soft drinks (light) - Formats: - 0.5L and 1.5L bottles - PCO 28-1881 closure - Filling product: - Water and carbonated soft drinks (7.5g CO₂) - Closure system: - Screw caps, fed via chute and tipper (Zalkin + NSM) - Packing: - Shrink pack: 3x2 bottles (double lane) Dcsdpfx Ajwh U Aveiiop - Pallet type: - Euro (1,200 x 800 mm) - Düsseldorfer (600 x 800 mm) - Electrical specs: - 400 V / 50 Hz - Control systems: ABB, Siemens - Operating direction: Standard Scope of Delivery  - Blow moulder: SIG Corpoplast Blomax 24, year 2008 - 24 stations, heating oven with 20 boxes, ABB control - Incl. Preform tipper MD3, preform hopper SBT, elevator HFT, conveyor RGTD, chute ASTK - Air conveyor: NTS Mistral, year 2000 - Pneumatic adjustable rails, basket cable tray - Filler: KHS Innofill EV-VF, year 2000 - 176 electronic filling valves, valve manifold (APV), air conveyor, infeed worm, clamping star wheel - Screw capper (Zalkin, 22 heads), cap feeding (NSM), foam cleaning (ECOLAB, 2001), dosing units (2011) - Mixer / Deaeration: KHS Innopro DX65 Contimix 65/5-T20, year 2000 -  65,000 l/h, 5 components, Brix meter (Anton Paar), Hilge pumps - Labeller: Sacmi Opera 300 RF 26T/R S1E1, year 2012 - 26 plates, hotmelt, wrap-around, reel-fed, parallel infeed, safety lift version - Inspection & Coding: - Fill level and closure check: KHS Innocheck CUB Vision Circle, year 2013 - Bottle laser coding: Videojet with housing - Pack inspection: KHS Innocheck CUB, year 2015 - Packing machine: Kisters SP060V, year 2000 - Shrink-packer 3x2 (double lane), 60 cycles/min, manual lane width, foil only - Conveyors & Pack labelling: - Bottle conveyor: KHS Innoline BTR, year 2000, plastic chain, dry lubrication - Pack conveyor: Paxona + Schaefer, year 2009 - Pack labelling: Contact 100, self-adhesive label from reel

Condition: used, functionality: fully functional, For sale is an Oerlikon bevel/worm gear unit of the E 37 EX 2 series, serial number 828499L01.1. The unit comes from a fully functional installation and is suitable for test benches, special purpose machines, and industrial drive applications. Technical specifications (general): Manufacturer: Oerlikon Type: E 37 EX 2 Design: Bevel/worm gear unit Application: Test bench technology, mechanical engineering, industrial drives Condition: used, functional Djdpoypb Iyefx Aiiscp

Condition: new, Year of construction: 2026, Metal Cutting Band Saw CORMAK BS530H – Professional Tool for Cutting Pipes and Profiles The CORMAK BS530H metal cutting band saw is a high-performance semi-automatic band saw designed for precise cutting of steel components, pipes, and profiles at various angles. Its robust cast iron construction, reinforced blade guiding system, and advanced hydraulic technology make it an ideal solution for serial production and demanding industrial environments. Dsdpfx Aiew U Svlsijcp The integrated control panel allows a single operator to manage all machine functions, significantly reducing operating time and improving work ergonomics. Main advantages of the machine Semi-automatic operation – hydraulic lifting and lowering of the saw arm and vice control via the control panel. Worm gear transmission with bronze components – ensures smooth, precise operation without vibrations. Stepless cutting speed adjustment from 20–70 m/min – allows adaptation to various materials and cutting conditions. Carbide blade guides with roller bearings – provide durability and highly accurate blade tracking. Quick-clamping vice – manually or hydraulically operated, with left/right positioning capability. Angular cutting from -45° to +60° – with precise angle reading on the scale. Durable cast iron body – guarantees cutting stability and long machine service life. Hydraulic arm lowering adjustment – allows precise control and setting of the return height. Construction and technology The BS530H model features a reinforced drive system and industrial hydraulic components, ensuring reliable operation even under intensive working conditions. The heavy-duty cast iron body reduces vibrations and provides smooth, consistent performance. The ergonomic control console allows all operations to be managed from a single location. The coolant system integrated into the machine base effectively removes heat and contaminants, protecting the blade from overheating and premature wear. Precision and work efficiency Thanks to stepless speed adjustment, manual or semi-automatic operating modes, and the use of a dial tension gauge for monitoring blade tension, the BS530H metal cutting band saw ensures repeatable results and high cutting quality even during long production runs. Work efficiency is further improved by the front material support roller and the arm locking system, which increases operator safety after completion of the cutting cycle. Applications The machine is designed for: industrial production plants, metalworking workshops, companies performing serial cutting of profiles, pipes, and solid steel sections. It is ideal for serial production, steel fabrication, and preparing components for welding or further processing. Standard equipment Control console with semi-automatic functions Hydraulic vice Powered blade cleaning brush Coolant system with pump Front material support roller Dial blade tension gauge CE declaration and technical documentation (DTR) Optional equipment Additional material guide rollers Semi-Automatic Metal Cutting Band Saw CORMAK BS530H Technical data Parameter Value Working height 965 mm Cutting speed 30–80 m/min Saw blade dimensions 3770 × 34 × 1.1 mm Coolant system power 0.1 kW Total motor power 3.0 kW Power supply 400 V Machine dimensions (W × D × H) 2200 × 1400 × 2050 mm Weight 730 kg

Year of construction: 1987, condition: ready for operation (used), Center width: 400-800mm, rotational speed: 1000-2700/min, workpiece diameter: 10-300mm, grinding wheel diameter: 40-300mm, swivel angle: -45 to 45°, length: 3000mm, width: 2500mm, height: 2275mm, with oil mist separation system Hoffmann (new filter inserts), filter system gravity belt filter Faudi, hydraulic unit, additional grinding head for grinding worm gears, grinding mandrels diameter 50, 40, 27, 22, holder for SK40 and MK5, driver sets for different clamping diameters, operating instructions, circuit diagrams in paper form, an inspection is possible. Dsdpforgahxjx Aiiocp

Condition: reconditioned (used), workpiece diameter (max.): 60 mm, roll diameter: 185 mm, roll width: 150 mm, One - Reconditioned ORT Model RP18 - 18 ton Hydraulic Thread Rolling Machine with fixed rolling spindles for in-feed rolling or thru -feed rolling with helical thru-feed dies. Including new rolling spindles , new bearings and new worm gears & shafts etc Max rolling dia: 60mm - Max rolling width with in-feed dies: 150mm - Max rolling width with thru-feed dies: infinite Spindle diameter : 69.85mm & 80mm - Power of main motor: 7.5kw With one pair of spindle sleeves 69.85mm i.d. x 80mmo.d. & 17 sets thread dies 60mm, 120mm & 180mm wide from M6 to M24 Photographs taken before reconditioning Djdpfsyml Ekjx Aiiecp

Condition: used, Year of construction: 2001, overall weight: 10,000 kg, total length: 3,000 mm, total width: 2,300 mm, total height: 2,500 mm, REISHAUER RZ 362 A – CNC Gear Grinding Machine Year of Manufacture: 2001 Serial No.: 75523 Max. Workpiece Diameter: approx. 360 mm Max. Module: 7 Max. Gear Width: approx. 175 mm Max. Workpiece Weight: depending on configuration, approx. 60 kg Grinding Worm Diameter: approx. 270–350 mm Helix Angle: up to approx. ±45° CNC Control: Reishauer Connected Load according to Nameplate: 26 kVA Weight approx.: 10,000 kg Dimensions (LxWxH) approx.: 3000 x 2300 x 2500 mm Year of construction: 2,001 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: Loaded on truck under power: No Dedezy Tkmjpfx Aiiocp

Condition: new, cutting diameter 410 mm capacity 90 degrees: flat 540 x 300 mm capacity 90 degrees: square 300 x 300 mm capacity 45 degrees: flat RE 400 x 210 mm capacity 45 degrees: round RE 400 mm capacity 45 degrees: square RE 260 x 260 mm capacity 45 degrees: flat LI 380 x 170 mm capacity 45 degrees: round LI 340 mm capacity 45 degrees: square LI 260 x 260 mm capacity 60 degrees: round 260 mm capacity 60 degrees: square 175 x 175 mm turning speed range: 20 - 80 m/min saw band length 4290 x 34 x 1.1 mm work height max. 865 mm voltage 400 V engine output ca. 3.0 kW weight of the machine ca. 686 kg range L-W-H 2340 x 1430 x 1550 mm The MBS 600 DGA-V model is a semi-automatic double-miter band saw for miter cuts up to 60°. The infinitely variable cutting speed and the hydraulic vise make for comfortable operation. Thanks to its solid construction, this model guarantees precise cuts when cutting hollow profiles, solid materials, stainless steel, tool steel, etc. This machine is used in metalworking shops, repair shops, mold and tool making, ... Features: - continuously variable cutting speed * for optimal adjustment to the workpiece (20â??80 m/min) - Increased cost-effectiveness thanks to semi-automatic operation - Choice of manual or semi-automatic sawing mode - Adjustable vise; clamping is manual or hydraulic - Swivel range of the saw frame (-45° to 60°) readable via a degree scale - Professional band saw offering good value for money - Smooth, vibration-free operation ensures high cutting accuracy - Optimal power transmission to the drive wheel * via a hardened and ground worm shaft and bronze worm gear - Adjustable hydraulic cylinder for regulating the contact . pressure of the saw frame - Saw blade guidance via a combined roller-and-jaw guidance system * with carbide inserts Semi-automatic operation: - Hydraulic clamping of the vise - Hydraulic lowering of the saw frame - Lifting of the saw frame Scope of delivery - Saw blade - Workpiece stop Dodpfoz D It Isx Aiiscp - Base frame - Pressure gauge for band tension - Band saw guide with carbide inserts - Hydraulic quick-clamping vise - Coolant system - Hydraulic lowering cylinder - Motor protection switch - Automatic limit switch

Condition: new, cutting diameter 410 mm capacity 90 degrees: flat 540 x 300 mm capacity 90 degrees: square 300 x 300 mm capacity 45 degrees: flat RE 400 x 210 mm capacity 45 degrees: round RE 400 mm capacity 45 degrees: square RE 260 x 260 mm capacity 45 degrees: flat LI 380 x 170 mm capacity 45 degrees: round LI 340 mm capacity 45 degrees: square LI 260 x 260 mm capacity 60 degrees: round 260 mm capacity 60 degrees: square 175 x 175 mm turning speed range: 45 + 90 m/min saw band length 4290 x 34 x 1.1 mm work height max. 866 mm Dedpfoz D Iufox Aiijcp voltage 400 V engine output ca. 3.0 kW weight of the machine ca. 606 kg range L-W-H 2340 x 1430 x 1460 mm The MBS 600 DG is a precision horizontal band saw designed for universal use. Key features of this machine include a swiveling saw frame for double miter cuts from -45° to 60°, as well as a hydraulic cylinder for precise lowering via a control valve. Features: - Band saw guide via a combined roller-and-jaw guide system * with carbide inserts - Swiveling saw frame for double miter cuts * to the left (-45°) and right (60°) - 2 band saw speeds (45 / 90 m/min) for optimal cutting results - Robust construction, ensuring smooth and vibration-free operation - Professional band saw offering excellent value for the price - Optimal power transmission to the drive wheel via a hardened . and ground worm shaft and bronze worm gear - Adjustable hydraulic cylinder for regulating the clamping . pressure of the saw arm - Sturdy gray cast iron vise with workpiece stop * Ideal for batch cutting - For cutting profiles, tubes, and solid materials made of iron . and non-ferrous materials Scope of Delivery - Saw blade - Workpiece stop - Base frame - Pressure gauge for band tension - Band guide with carbide inserts - Quick-release vise - Coolant system - Hydraulic lowering cylinder - Motor protection switch - Automatic end-of-stroke shut-off

Condition: excellent (used), HHydraulic drive variator with 3.0 kW motor, 1450 rpm, with reduction gear for speed reduction, electric adjustment via worm gear motor, output speed 0 to 25 rpm, output torque 1200 Nm at 14 rpm or approx. 3 kW at 14 to 25 rpm Dodpfx Aiex U Tfpoijcp

Condition: good (used), Peter Wolters AC500 lapping machine TECHNICAL DATA AND SCOPE OF SUPPLY TECHNICAL DATA Rolling device size: 42 TS 7/14 Working disk diameter: 415 mm Ring width: 54 mm Working disk thickness: 50 mm Possible wear of the disks to approx.: 20 mm Number of rotor disks: 14 Drive data: 380 V / 50 Hz Upper disk drive: 1.0 / 1.4 kW Worm gear motor: 56 / 112 rpm Lower disk drive: 1.0 / 1.4 kW Worm gear motor: 500 / 100 rpm Workpiece drive: 0.5 / 0.7 / 0.9 kW 3-pole worm gear motor: 6 / 18 / 36 rpm Tilt arm drive: 0.25 kW Digital load adjustment of the upper work disk: 0-250 daN Connection data Electrical connection: 5.0 kW Compressed air connection: 5-7 bar Compressed air consumption: Approx. 8 Nl/min OFFER SCOPE Dcsdpfx Aetxitvjiiep U.A: (list not exhaustive): Peter Wolters AC 500 lapping machine / fine grinding machine 1 inverter per motor documentation Exact scope of offer according to photo gallery No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Year of construction: 1990, condition: like new (used), Short/ Noodles pasta line: - capacity 400 kg / h - Delivery conveyor Dcedpfjh Dxgaex Aiiop - mixer - dispenser, water / flour, horizontal - worm conveyor - Press - Vibro feeder , reconditioned in 2010 - First dryer , reconditioned in 2010 - Secound Dryer - Two drying strips - Two strips for dried pasta - Metal Detector - Automatic packing unit

Condition: ready for operation (used), SEW WF20 CMP50S/BP/KY/AK0H/SB1 worm gear motor, serial number 01.1896603719.0002X13, used, in good condition, 100% functional, scope of delivery as shown in the photos. Dcjdpfsy T Utlox Aiiep