Used Worm Hackers for sale (352)

Condition: repair required (used), Year of construction: 2002, Hacker chipper requiring overhaul with a 1300 mm rotor width 45 kW motor approximately 50 knives, 40 x 40 mm, on the rotor The chipper runs, but the gearbox wobbles on the rotor stub It is still possible to chip material, but it will need to be repaired at some point Cedps Ah T R Tjfx Aiisri Large hopper on top, approximately 2.4 x 2.4 m

Condition: excellent (used), 2 knives Knife width: 35 cm Drum diameter: 125 cm Drum width: 25/7 cm Maximum material height: 13 cm Credpfx Asx Tf E Esiiji Maximum material width: 33 cm Outlet: 25 cm Motor: 45 kW Transport width: 200 cm, height: 150 cm, length: 280 cm

Condition: used, Year of construction: 1989, grinding diameter 350 mm grinding length 660 mm max. module 25 min. module 0,5 Control CNC total power requirement 30 kW weight of the machine ca. 8,7 t Cedpfx Ajz Drb Noiieri

Condition: used, Year of construction: 2012, grinding diameter 200 mm profile depth 30 mm workpiece length - max. 2790 mm grinding length 2310 mm Maximum pitch of the screw -/+ 50 ° Maximum number of gears 1-999 workpiece weight max. 250 kg z-travel 3000 mm Crsdpfx Aeza Hqzjiiei x-travel 185 mm max. dia. of grinding wheel 450-330 mm Grinding wheel thickness (with recess) 20-70 mm roll diameter 120 mm Speed of the grinding wheel spindle 1500 - 6000 U/min Workpiece spindle speed 0 - 600 U/min Speed of the pitch axis 0-4 1/min Speed of the dressing spindle 1500-16000 1/min feed speed z-axis 0-10000 mm/min feed speed x-axis 0-10000 mm/min total power requirement 150 kVA control Siemens Sinumerik 840D SL weight of the machine ca. 30 t dimensions of the machine ca. 10,65 x 5,37 x 2,75 m Features/Accessories: - Filtration system: KNOLL VL1500/5000 - many accessories—list to follow - documentation

Condition: used, Year of construction: 1979, workpiece diameter 320 mm threading length 300 mm Crodpfx Aet Hwnpjiioi thread pitch mm total power requirement 90 kW weight of the machine ca. 12000 kg dimensions of the machine ca. m Thread and worm grinder for steering worms

Condition: used, Year of construction: 2023, operating hours: 1,621 h, machine/vehicle number: 6000030, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 575 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D SL, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,800 mm, workpiece height (max.): 875 mm, total height: 6,600 mm, total length: 8,200 mm, total width: 4,800 mm, overall weight: 32,000 kg, spindle speed (min.): 17,500 rpm, spindle speed (max.): 1 rpm, distance table to spindle center: 1,300 mm, distance table center to spindle nose: 425 mm, number of spindles: 1, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, Technical Data Operating time: 1,621 hours Technical Data Supply voltage: 3 × 400 V / 50 Hz (earthed) Supply system: TN-S or TN-C system Total connected load: 105 kVA Nominal load factor RDF: 0.6 Circuit breaker: 160 A gG (5 s) Dimensions Footprint including coolant cleaning system (W × H × D): 8.20 × 4.80 × 6.60 m Weight Operating weight of the machine: 32,000 kg Transport weight: 27,000 kg Control System CNC control: SIEMENS SINUMERIK 840D SL Main Spindle Spindle arrangement: horizontal Design: liquid-cooled motor spindle, AC synchronous technology Spindle lubrication: oil lubrication with minimum quantity lubrication Tool holder: HSK-A63 Tool Clamping System Mechanical clamping force: > 18 kN Setting dimension: 10.5 ± 0.1 mm Performance Data Speed range: 1–17,500 min⁻¹ Acceleration time: 0.7 s Power: 35 kW Nominal power: 26 kW Torque: 80 Nm (40% duty cycle) Nominal torque: 60 Nm Tool Magazine Tool change system: pick-up Tool management: permanently coded Capacity: 40 (1 × 40) tools Maximum total tool load: 200 kg Working Area X-axis: 3000 mm Y-axis: 1800 mm Z-axis: 875 mm Distance between spindle and center of swivel table: 425–1300 mm Tool change position X/Y/Z: 0/0/-310 mm Drive System General Design: Three-phase linear motors Position measuring system X-/Y-/Z-axis: direct, absolute X-axis Rapid traverse speed: 120 m/min Maximum acceleration: 10 m/s² Relative acceleration increase (G0): 200 m/s³ Relative acceleration increase (G1): 50 m/s³ Peak force: 10,000 N Nominal force: 5,000 N Cedpo Aax U Iofx Aiisri Y-axis Rapid traverse speed: 120 m/min Maximum acceleration: 16 m/s² Relative acceleration increase (G0): 600 m/s³ Relative acceleration increase (G1): 300 m/s³ Peak force: 10,000 N Nominal force: 5,000 N Z-axis Rapid traverse speed: 120 m/min Maximum acceleration: 20 m/s² Relative acceleration increase (G0): 1000 m/s³ Relative acceleration increase (G1): 500 m/s³ Peak force: 7,000 N Nominal force: 3,500 N Accuracy Positioning accuracy A: ≤ 0.010 mm Repeat accuracy R: ≤ 0.006 mm Tool Change Average chip-to-chip time at n < 17,500 min⁻¹: 4.00 s Workpiece Handling Design: Swivel table driven by an AC servomotor with two opposing clamping surfaces Swivel table: bilateral locking via gear coupling, hydraulically actuated Swivel time 0/180 degrees: 4.0 s Maximum asymmetrical load: 3000 Nm Repeat accuracy at a diameter of 1200 mm: ≤ 0.010 mm Maximum dimensions of clamping device and workpiece: Ø 2200 mm × 3480 mm Maximum weight of clamping device and workpiece per side: 1000 kg Swivel range: 358° Swivel range with parallel loading: -16°–0° and 164°–180° Worm gear division: 2° Maximum speed: 16 min⁻¹ Interface for Control Programs Rotary Distributor Rotary distributor pair for NC rotary table (A/U-axis): unregulated, leak-proof sealed Distribution channels: 16 Maximum hydraulic operating pressure: 250 bar Maximum operating pressure: 8 bar Nominal diameter: 6 Maximum permissible speed at p = 200 bar: 20 min⁻¹ Hydraulic System Operating pressure: 250 bar Flow rate: 9 dm³/min Capacity of the hydraulic tank: 120 dm³ Hysteresis when charging the accumulator: 230–260 bar

Condition: used, Year of construction: 2008, Technical details: max. wheel diameter: 400 mm max. module: 10 min. module: 0,3 weight of the machine ca.: 11,5 t dimensions of the machine ca.: 3,3 x 2,75 x 2,8 m max. number of teeth: 999 min. number of teeth: 5 Width of teeth: 0-300 mm pressure angle max.: 30 pressure angle min.: 14 workpiece weight max.: 300 kg worm grinding diameter: 300...205 mm width of grinding worm: 125+0,7 / -0,5 mm boring diameter: 160 H7 mm Csdpfx Aio Ah Sc Ieieri

Condition: used, MONNIER + ZAHNER MZ 120 is a Worm gear cutting machine, built for precision, high accuracy and reliable operation. Capacities: workpiece diameter 2–40 mm, module max 1.5 mm, workpiece length max 250 mm, max cutting length 150 mm, cutter diameter 16–32 mm. Specs: milling spindle speed max 8000 t/min, work piece spindle speed 770 t/min, milling spindle drive 1 kW, max milling head inclination 45°. Accessories: sprinkle cooling device, lamp, switch cabinet air conditioner. Achieves tight tolerances; typical sectors: automotive, watchmaking, machine tools, aerospace, medical. Credpfx Aioza Ukieisi

Condition: good (used), Year of construction: 2012, Slow-speed machine with a push-floor system. Rotor width: 830 mm. Crsdpfjy T Ef Eox Aiisi Large rotor with 38 blades. Blade size: 40 x 40 mm. 22 kW motor. Screen aperture: 25 mm.

Condition: ready for operation (used), Year of construction: 1989, operating hours: 2,100 h, functionality: fully functional, thread length: 880 mm, feed length X-axis: 1,000 mm, feed length Z-axis: 100 mm, feed rate X-axis: 1 m/min, feed rate Y-axis: 5 m/min, position of the milling head: Horizontal, swivelling, center height: 1,060 mm, type of input current: AC, power of feed motor: 4,000 W, milling spindle length: 200 mm, spindle bore: 90 mm, spindle speed (max.): 400 rpm, spindle speed (min.): 25 rpm, mandrel length: 200 mm, collet bore: 90 mm, clamping length: 880 mm, workpiece diameter (max.): 500 mm, Thread Milling and Gear Hobbing Machine MSZ 5A352ПФ2 The MSZ model 5A352ПФ2 is a universal thread milling and gear hobbing machine, designed for machining splines, worms, and cylindrical gears by milling and hobbing processes. Manufactured in 1984, the machine is intended for industrial applications requiring reliable performance, versatility, and repeatable accuracy. The machine is suitable for workpieces with a maximum length of 1000 mm and a maximum diameter of 500 mm. The maximum machining (spline/thread) length is 880 mm, and the machine supports gear cutting up to module 8, covering a wide range of thread and gear machining tasks. Helix and thread angles up to 30° can be machined, allowing flexible use in mechanical engineering and transmission manufacturing. The milling and hobbing spindle features a 90 mm spindle bore and supports cutting tools with a maximum hob diameter of 160 mm and a maximum hob length of 200 mm. The spindle operates in a speed range of 25 to 400 rpm, providing suitable cutting conditions for different materials and tool diameters. The main drive motor offers multiple power and speed stages (5 / 6.3 / 10 kW at 750 / 1000 / 1500 rpm). The machine is equipped with stepless longitudinal and radial feeds, with longitudinal feed rates from 2 to 100 mm/min and radial feed rates from 2 to 50 mm/min, enabling precise control during machining operations. The milling head is horizontal and swivelling, and the machine allows accurate synchronization for thread milling and gear hobbing operations. Crsdpfex Unpvsx Aiiji With overall dimensions of approximately 3100 × 2270 × 2100 mm (up to 3540 × 2515 × 2100 mm with auxiliary equipment) and a total weight of about 7890–8500 kg, the 5A352ПФ2 features a rigid, heavy-duty construction that ensures excellent stability and vibration damping. The machine operates on three-phase AC power (380 V, 50 Hz) and is equipped with a PU F5007 control system. Condition: *Used machine *Ready for operation *Fully functional *Operating hours: approx. 2,100 h Scope of delivery: *Complete set of change gears *Technical passport (Russian) *Operating manual (Russian) Typical applications: *Thread milling *Gear hobbing (spur gears, worms) *Machining of transmission components *General mechanical engineering *Repair and small- to medium-series production

Condition: used, Year of construction: 2012, Control Siemens 840 D Csdpfx Aijxh Rqtsisri weight of the machine ca. 13,5 t dimensions of the machine ca. 7m x 4m x 2,75m m Accessories: Coolant tank Grinding wheels Various spare parts Operating and maintenance instructions CE conformity Dimensions: 7x4x2.75 m ( LxWxH) TECHNICAL DATA: Workpiece data: max. outer diameter: 250 mm with max. grinding wheels Ø 450 mm max. diameter to be machined over table: 375 mm Profile depth for dressable grinding wheels: 40 mm max. workpiece length: 3,600 mm max. distance between centers (1): 2,800 mm max. bevel angle: +/- 90° Number of teeth of the workpiece: 1 - 999 max. weight of the workpiece: 250 kg Working area: Center distance between workpiece and tool spindle: 355-170 mm Radial travel: 185 mm Axial travel: 3,000 mm Swivel angle: +/- 90°

Condition: used, Second-hand DHB wood chippers, Type 600, for the professional chipping of wood and other materials. The machine is fitted with a 20 mm screen, an 18.5 kW motor and a 600 mm long rotor. Technical data: - Screen: 20 mm - Motor: 18.5 kW Csdszwl S Depfx Aiijri - Rotor length: 600 mm

Condition: used, Year of construction: 2010, functionality: fully functional, SAHINLER FM-12 hydraulic flanging machine for forming the edges of dished ends, tank heads and boiler bottoms. Made in Turkey, year 2010, used condition. Built for tank, boiler and pressure vessel manufacturers who need clean, repeatable flanged edges ready for welding to the vessel shell. Main features: - Electro-welded frame, thermally stress-relieved for rigidity and stability during flanging - Motorized lower bottom-holder carriage on slides, moved by worm screw, with hydraulic height adjustment - Induction-hardened shaping roll, driven by a radial piston motor with variable speed - Induction-hardened flanging roll, pressed by hydraulic cylinders, with variable speed - Manual or automatic flanging mode - Two hydraulic, height-adjustable bottom support rolls - Complete hydraulic unit with oil tank, filter, thermostat and heat exchanger - Control panel with joysticks, pushbuttons, warning lights and emergency stop Applications: tank and tanker heads, boiler bottoms, pressure vessel ends, silo and hopper bottoms. Suitable for mild steel, stainless steel and aluminium. Crjdpe Ahzh Defx Aiioi Exact capacities (plate diameter, thickness, flanging radius), more photos and video are available on request. The machine can be inspected on site.

Condition: used, max. wheel diameter 0-200 mm Cedstuxa Uopfx Aiieri max. module 25 min. module 0,5

Condition: used, Worm gear for C400 “Wolfking”. Cjdpfx Aszzcrisiiori

Condition: used, Year of construction: 2019, functionality: unexamined, machine/vehicle number: S40-0051, type of input current: three-phase, input voltage: 400 V, working width: 3,210 mm, cutting width (max.): 3,210 mm, laser power: 400 W, type of cooling: water, laser type: CO₂ laser, laser source model: Firestar f400, Equipment: fume extraction, The system consists of: Trotec SP4000 C / New Textile – 400 W CO₂ laser cutting system Sigma C13 – Cooling unit for the laser system Aigner VENT Set SP 3000 – Extraction and ventilation unit ASCO BV – Unwinding and material feed system for roll goods JQS Querimat QSV – Cross-cutting unit with a cutting width of 2,500 mm Firestar – CO₂ laser source Csdpfxjzuyg Ro Aiijri The system is currently located in Worms and was used in ongoing production until the plant was shut down. Since the machine is currently not connected to the power grid, a current functional test cannot be performed at this time. An on-site inspection is possible by arrangement. The system is offered in its current condition and with the components shown in the pictures.

Condition: refurbished (used), Year of construction: 1999, functionality: fully functional, filter area: 18 m², pressure: 10 bar, cake thickness: 25 mm, overall weight: 2,000 kg, number of chambers: 28, Used, refurbished Häcker chamber filter press, Type KFP 630/28. Plate format 630 x 630 mm, volume 220 liters, filtration area 18 m². Crjdpfx Aez Dgbwjiioi 28 filter plates, cake thickness 25 mm, maximum pressure 10 bar, with black PP filter cloths. Equipped with mounted Häcker piston pump (flow rate 2.5 m³/h), with compressed air tank, mini-compressor. With electrical cabinet. Filter press installed in a 20'' dry container with an opening underneath (drawing available). Approximate dimensions: 3200 x 1000 x 1500 mm, weight 2000 kg. With technical documentation.

Condition: used, cutting diameter 470 mm saw band length 6.060 mm capacity 90 degrees: square 610 x 410 mm capacity 45 degrees: round 475 mm capacity 45 degrees: square 490 x 415 mm capacity 60 degrees: round 330 mm capacity 60 degrees: square 320 x 410 mm diameter min. 10.0 mm turning speed range: 20 - 100 m/min dimensions of saw-band 6060 x 34 x 1.1 mm height of material-table 810 mm total power requirement 5.5 kW weight 2080 kg range L-W-H 3280 x 1760 x 2010 mm Current new price ~ 55.000 euros Special price upon request Features: - Robust semi-automatic electro-hydraulic band saw - Miter cuts from -60° (left) to +60° (right) - Designed for industrial use - Ideally suited for cutting solid material - Extremely stable and robust construction - Cast-iron pulleys with a diameter of 500 mm - Equipped as standard with infinitely variable band speed adjustment - Microswitches control the highest and lowest positions of the saw arm - Includes a driven cleaning brush for optimal cleaning . and maintenance of the saw blade - Fully hydraulic system controls the machine's operating sequences - Cooling system provided at the saw blade guides - Blade guides equipped with adjustable carbide inserts - Machine drive features a low-maintenance, oil-lubricated worm gear - Powered by a robust three-phase motor - Motor equipped with overload protection - Machine frame consists of a highly solid steel construction - Features a solid, precise dual-column guide system - Linear guides on both columns ensure perfect cutting results Crjdpfxj Ah Idpo Aiiji - Includes cutting height limitation - Vise clamping jaw equipped with a long-stroke cylinder - Operating manual in German (PDF)

Condition: ready for operation (used), * Brand: Saxlund * Model: worm conveyor Cjdpfx Asywmy Sjiijri * A-A Length: 4500 mm, ∅ 400 mm * Driving: 15 kW gear unit. * On stock: 2 pieces

Condition: reconditioned (used), Year of construction: 1985, Hacker, factory-refurbished in 2023 for €7,500. Motor: 22 kW Equipped with 49 impact blades Throughput: 300 - 1500 kg/hour Screen hole size: 25 mm Operating hours: 7738 Infeed hopper: 90 x 90 cm With an additional hopper on top, measuring 1 x 1 m, total height: 265 cm. Cjdpfx Ao Agw U Noiisri

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, rotary table diameter: 450 mm, position of the milling head: Schwenkbar (45°), table diameter: 450 mm, total length: 5,600 mm, gear diameter: 500 mm, total height: 3,100 mm, total width: 3,600 mm, input frequency: 50 Hz, type of input current: three-phase, spindle speed (max.): 340 rpm, table bore: 125 mm, spindle speed (min.): 80 rpm, travel distance X-axis: 325 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 400 mm, overall weight: 14,800 kg, distance table to spindle center: 350 mm, tool diameter: 200 mm, controller manufacturer: Siemens Sinumerik 840D sl, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, rotational speed infinitely variable, A Pfauter PE 500 for the economical production of straight and helical spur gears up to module 12 and 500 mm in diameter – completely overhauled by SerWeMa with Siemens Sinumerik 840D sl, equipped with a gripper unit and a 32-position workpiece storage for unmanned operation. The machine is ready for operation in our hall in Chemnitz: you can inspect it under power, and if desired, we will mill your own sample part and you can take delivery of the machine here. No delivery time, no risk. Sold by Serwema Retrofit Solutions, the company that carried out the overhaul and knows the machine inside out. The general overhaul included complete geometric overhaul by grinding and scraping, new roller bearings in the main drive and in the milling head, measuring and reconditioning the worm gear, overhauled or new ball screw drives, overhaul of hydraulics, lubrication and coolant system, and new electrical equipment with Sinumerik 840D sl, Sinamics S120 and new axis motors. An electronic generating gear controls all generating and single-part machining processes, and an NC-controlled crash recovery protects the tool and workpiece in the event of a power or phase failure. New paint in RAL 7035/5015 with oil and coolant resistant two-component paint, acceptance of geometry according to SerWeMa protocol based on DIN ISO 6545. The machine controls six CNC axes: X radial, Y tangential, Z axial, A milling head swivel, B milling cutter drive and C table drive. The SerWeMa gear cutting software guides you through workpiece and tool data via masks, without the need for programming: up to three position-oriented gearings per workpiece, each with its own tool, up to three cuts per gearing with simultaneous or counter-rotating movement, form corrections for convex, conical and convex-conical profiles, lead-in and lead-out phase correction, chamfer milling, dimension correction via tooth width, two-roll or two-ball gauge, measuring stop, shift strategy with defect management per generating cutter and cutting force monitoring with automatic retraction. Technologies: generating milling, single-part milling and worm gear milling both radially and tangentially. A hand-held device with a handwheel allows setup directly in the working area. Technical data: max. workpiece Ø 500 mm, max. module 12, max. milling cutter Ø 200 mm, max. milling cutter length 240 mm, shift travel 200 mm, milling cutter speed 100–450 rpm, swivel angle +25°/−45°, travel radial 325 mm (axis distance 25–350 mm), travel axial 400 mm (310–710 mm), table diameter 450 mm, table bore 125 mm, connection power approx. 60 kVA. Installation dimensions incl. automation approx. 7.2 × 4.5 × 3.3 m, weight approx. 16.8 t. Equipment: machine enclosure, chip conveyor, gripper unit with two grippers, workpiece storage with 32 positions, preparation for emission extraction (150 mm nozzle, Harting connector on the machine roof). Documentation complete in German: operating manual, electrical diagrams with parts lists, hydraulic and lubrication diagrams. Serwema optionally offers: trial part milling in our factory, additional milling arbors, assembly and commissioning at your location, operator training and a control system upgrade to Sinumerik ONE. Spare parts and service come from a single source, worldwide, even after the purchase. Crodpez Et E Eefx Aiisi

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, rotary table diameter: 900 mm, position of the milling head: Schwenkbar (35°), table diameter: 900 mm, total length: 6,000 mm, gear diameter: 1,200 mm, total height: 3,500 mm, total width: 3,900 mm, input frequency: 50 Hz, type of input current: three-phase, spindle speed (max.): 360 rpm, spindle speed (min.): 36 rpm, travel distance X-axis: 725 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 1,000 mm, overall weight: 24,000 kg, distance table to spindle center: 780 mm, tool diameter: 280 mm, controller manufacturer: LH90, control type: CNC control, Equipment: documentation/manual, rotational speed infinitely variable, A young Liebherr LC 1203 from the current LC generation: manufactured in 2009, with a motor milling spindle, capable of processing workpieces up to 1200 mm in diameter and weighing 9.5 tons, module 20 – the machine for large gears in gearbox manufacturing, wind power, mining, and heavy machinery construction. Serwema Retrofit Solutions, Chemnitz, optionally upgrades the machine to Siemens Sinumerik ONE, the latest control generation with full spare parts and support availability, and delivers it with a new, air-conditioned control cabinet manufactured in-house and a user-friendly interface. The mechanics remain in the well-maintained original condition with the original paint – a Liebherr from 2009 does not need a general overhaul, but a control system that will last for the next 20 years. Delivery time is six months from order. The machine mills spur and helical gears, as well as shafts up to module 20, in a reinforced version up to module 24, starting from a tooth count of 1 – including worm gears and special profiles. With 1000 mm of axial travel between the milling spindle axis and the table surface, long pinion shafts are securely clamped, and the 900 mm table supports 95 kN. The motor milling spindle rotates from 36 to 360 rpm, the milling head swivels by ±35°, and the tangential travel of 320 mm utilizes the full milling cutter length of 340 mm for long service life. Technical data: max. workpiece diameter 1200 mm, max. workpiece weight approx. 9.5 tons (table load 95 kN), table diameter 900 mm, distance between milling spindle axis and table axis 55–780 mm, distance between milling spindle axis and table surface 200–1200 mm, max. module 20/24, min. number of teeth 1, max. milling cutter diameter 280 mm, max. milling cutter length 340 mm, tangential travel 320 mm, milling cutter speed 36–360 rpm, max. table speed 12 rpm, swivel angle ±35°. Installation dimensions approx. 6.0 × 3.9 × 3.5 m, weight approx. 24 tons. Scope of delivery: optionally, a new Siemens Sinumerik ONE control system with Sinamics S120 drives, air-conditioned control cabinet manufactured in-house, user-friendly interface with Serwema gear cutting software, machine enclosure, magnetic chip conveyor, circulating and loss lubrication, hydraulic unit, coolant system, operating manual. Original color scheme. Acceptance in Chemnitz together with you; a mechanical overhaul or geometry inspection according to DIN is offered additionally upon request. Crsdsz E Hx Sjpfx Aiiei

Condition: used, Year of construction: 1986, workpiece diameter 460 mm threading length 900 mm thread pitch 100 mm total power requirement 10 kW weight of the machine ca. 8 t dimensions of the machine ca. m Crodet H Smtjpfx Aiisi

Condition: used, Screw for C250 Csdpfxezzcgge Aiisri

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 01305-1, type of input current: three-phase, cooling capacity: 6 kW (8.16 HP), Manufacturer: Seydelmann Model: WD 114 Machine no.: 01305-1 Crjdpfxszxf Izo Aiiei Type: Industrial meat grinder Robust and professional Seydelmann WD 114 meat grinder, suitable for grinding and processing meat in butcher shops and industrial meat processing companies. The machine is largely made of stainless steel and is known for its solid construction, high reliability, and hygienic design. Technical specifications: Cutting plate diameter: 114 mm Hopper capacity: approx. 60 liters Capacity: up to approx. 1,000 kg/hour, depending on product, cutting plate, and application Motor power: approx. 6 kW 2 speeds on the feed screw Stainless steel feed screw Stainless steel worm housing Stainless steel locking nut Robust industrial construction Hygienic and easy to clean Suitable for professional and industrial use The Seydelmann WD 114 is a compact yet powerful machine and is particularly suitable for companies looking for a reliable, professional meat grinder with a high processing capacity.