Used Worm for sale (324)

Condition: good (used), DREISTERN P3.100.40/3 Profiling Line – 44 driven stations with flying shear Short title for platforms with character limitations: Dcjdpfx Aiszzyd Aeisp DREISTERN P3.100 Profiling Line, 44 Stations + Shear Platform Data * Machine Type: Profiling Line / Roll Forming Line * Manufacturer: DREISTERN-WERK * Model: P3.100.40/3 * Year of Manufacture: 2002 * Factory Number: 02 098 * Order Number: 38933-46 * Condition: Used, disassembled * Control System: Not available For sale is a comprehensively equipped DREISTERN profiling line, type P3.100.40/3, with 48 stations, 44 of which are driven, as well as an inline shear (“flying shear”). The line features quick-change plates, mechanical quick clamps, and a coolant piping system. Due to the large number of profiling stations, it is particularly suitable as a mechanical base for demanding, customer-specific roll forming applications. An expansion with additional stations is structurally possible. According to the previous operator, the line operated flawlessly until it was disassembled at the customer's plant. The control system is not available and is not included in the scope of supply. Recommissioning or control system adaptation by the buyer is therefore necessary. Machine Bed and Drive * Production direction: from right to left * Center distance: 330 mm * 48 stations total * 44 stations driven, with 44 gearboxes * Quick-change plates * Mechanical quick clamps * Coolant piping system * 1 × Baumüller DC motor, 42 kW * 1 × Baumüller DC motor, 15 kW Profiling Frames * Number included in scope of supply: 44 pieces * Tool width per frame: 275 mm * Working shaft diameter: 50 mm * Working shaft connection: 30 mm with keyway * Lower shaft mostly fixed; 6 frames with adjustable lower shaft * Axial adjustment * Adjustment range lower to upper shaft: 80–170 mm Gearboxes * Worm gear ratio: 1:21 * Lower/upper shaft ratio: 1:1 Inline Shear * Travel path: 1,900 mm * Profile rail guidance * Ball screw drive * Bosch servo motor * Valve block with punching unit * Folding table length: 3,000 mm * Emergency stop Scope of Supply * Machine bed with gearbox support * Infeed table * Pneumatic measuring wheel unit * Straightening device * Belt filter unit, 800 liters * Hydraulic unit for the shear * 44 gearboxes * 44 profiling frames * 2 Baumüller DC motors * 66 universal joints * Inline shear according to the above description

Condition: good (used), DREISTERN P3.100 Profiling Line – 16 driven stations and 2 × 18.5 kW Short title for platforms with character limits: DREISTERN P3.100 Profiling Line, 16 driven stations Platform data * Machine type: Profiling line / Roll forming line * Manufacturer: DREISTERN * Model: P3.100 * Year of manufacture: not known / to be added before publication * Condition: used, dismantled * Control system: not available For sale is a DREISTERN profiling line, type P3.100, with 18 stations, 16 of which are driven. The line is equipped with 16 profiling stands, 50 mm working shafts, quick-change plates, and two Bosch motors, each with 18.5 kW. The modular design with mechanical quick clamps and quick-change plates is suitable as a solid mechanical base for customer-specific roll forming applications. A constructive expansion with additional stations is possible. According to the previous operator, the line operated flawlessly until it was dismantled at the customer's site. The control system is not available and is not included in the scope of supply. Recommissioning or control system adaptation by the buyer is therefore necessary. Machine bed and drive * Production direction: from left to right * Axle distance: 330 mm * 18 stations in total * 16 stations driven, with 16 gearboxes * Quick-change plates * Mechanical quick clamps * Coolant piping * 2 × Bosch motor, each 18.5 kW Profiling stands * Number in scope of supply: 16 pieces * Tool width per stand: 275 mm * Working shaft diameter: 50 mm * Working shaft connection: 30 mm with groove * Fixed lower shaft * Axial adjustment * Adjustment range lower to upper shaft: 80–170 mm Gearboxes * Worm gear ratio: 1:7.5 * Lower/upper shaft ratio: 1:1 Scope of supply * Machine bed with gearbox support * Infeed table * Pneumatic measuring wheel unit * Special straightening device * 16 gearboxes Dcodpfx Aozzyd Njiijp * 16 profiling stands * 2 Bosch motors, each 18.5 kW * 32 universal joints

Condition: excellent (used), Year of construction: 2014, Roller coater BÜRKLE easy coater RCL 12M and UV system easy cure UV - TRUV with 2 lamps and 2 x roller conveyor BÜRKLE easy coater RCL 1300: For one-sided application on flat surfaces from above Operating side left Touch screen control TP 177 Micro Dcedpot Dx U Ssfx Aiijp Rubberized application roller Hard chrome-plated metering roller can be sensitively adjusted via worm gearbox Controlled belt transport with exposed counter roller for safe workpiece transport Quick-change system with split bearing and cross-disc coupling for easy changing of the application roller Oscillating squeegee, can be changed quickly for cleaning Separate, infinitely variable FU direct drives for application roller, metering roller and transport Reversible dosing roller Motors and limit switches in Ex version on the machine Non-Ex control cabinet and control panel outside the danger zone on the machine Mobile version Electrical preparation for integrating the roller coating machine into a coating line Technical data Working width: 1300 mm Workpiece height 3 - 80 mm Min. workpiece length 400 mm Rubberized application roller DM 240 mm Chrome-plated metering roller DM 172 mm Transport speed 2 - 15 m/min variable Connected load approx. 2.4 kW Speed of metering roller 1.0 - 3.0 m/min Working height 900 mm (+/- 20) Safety equipment according to CE Incl. switch cabinet Weight approx. 1650 kg UV system e.a.s.y. cure UV - TRUV with 2 lamps One-sided curing of UV-curing lacquers on flat workpieces from above Incl. control cabinet Working width max 1300 mm Workpiece height max 80 mm Number of lamps 2 # - changed 10/2023 UV lamp power 120 W/cm² each Speed 2 - 15 m/min variable Transport: Transport carpet Exhaust air connection 2 x 250 mm Connected load 39 kW Weight approx. 750 kg 2 x roller conveyor RB 1300 Working width 1300 mm length 4000 mm Speed 2 - 15 m/min variable Connected load 2 x 0.37 kW Total system length 12450 mm

Condition: used, Year of construction: 1995, functionality: fully functional, Drum Grinding and Polishing Unit Manufacturer: UHLIG, Type UB 22 Year: 1995 Technical Data: Make: Werner Uhlig Model: UB 22 Year of manufacture: 1995 Drive: Worm gear with motor Rotational speed: 5.6 – 54 l/min Shaft diameter: 25 mm, max. torque: 34 Nm Motor power: 0.25 kW Dsdpfx Aioyw Rhmjiocp Dimensions: approx. 1.00 x 0.90 x 1.20 m Weight: approx. kg (not specified) Equipment: - Control with frequency inverter - 2 single-chamber drums, approx. 200 mm wide, diameter 260 mm - Infinitely variable drum speed - Fresh water rubber hose - Waste water drain connection All details are subject to change without notice. A demonstration under power is possible at any time in our exhibition hall.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Grinding worm dimensions: Min./Max. outer diameter: 280/350 mm Dedpfxeyfnlks Aiiocp Width: 84/104 mm Max. pitch with limitations: MOD 8.0 (DP 3.2) Number of threads: up to 3 with limitations Max. usable width (shift distance): 90 mm For detailed technical information, please refer to the attached PDF file. Accessories: Several Fässler diamond wheels Dressing device Grinding stones Turbo separator

Condition: used, Worm wheel and gear set, edge grinder, edge grinder, sander, drawer grinder, round bar grinder -a set consisting of: 1 worm wheel and 1 gear for oscillation -is a: Original Husband replacement part -for: Husband edge sander -various shapes: single-flight or two-flight available -several sentences: available Dedpod Nb Tdsfx Aiiscp -Price: for 1 set -Weight per set: 1.4 kg

Condition: used, Year of construction: 1972, Technical details: grinding wheel diameter: 400 mm total power requirement: 3 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 1,5 x 1,4 x 1,3 m Dressing Grinder for gears REISHAUER AM max. width of grinding wheel 104 mm max. dia. of grinding wheel 400 mm max. module 7 min. module 0,5 pressure angle 10 - 30 ° grinding worm dia. 270 - 400 mm Dcedpfx Aijwi Ni Toijp width of grinding worm 62/84/104 mm grinding worm turning speeds: at profiling 18/35/70 U/min electrics - voltage/frequency 380 / 50 V/Hz long. movement of crowning device 156 mm *

Condition: ready for operation (used), Year of construction: 2015, clamping force: 1,600 kN, This 6-axis Arburg Allrounder 520 S 1600-290 / 290 was manufactured in 2015. It features a highly wear-resistant thermoplastic cylinder with a 30 mm diameter and a drive unit powered by a 30 kW motor. The machine is equipped with advanced control systems for both injection units and supports multi-component processing. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 520 S 1600-290 / 290 hydraulic injection moulding machine we have for sale. Contact us for further details. Dcodpfjyxdwdex Aiisp • Injection units and plasticizing • 1st injection unit: • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • 2nd injection unit: • 2nd injection unit 290, vertical • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Open nozzle 30 mm with nozzle tip; extended nozzle tip +20 mm; radius 15 • Heating band for open nozzle • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • Standard worm gear coupling; coupling geometry: double-sided • Multi-component processing; parting line setup on short runners for 2nd injection unit • Injection closing with mold (“flying injection”) • Drive, hydraulics, and cooling • 65 l/min charging flow rate • Pressure accumulator module, 64 l storage volume (max. 230 bar); accumulator drive • Continuous oil cooling and filtration; increased cooling capacity • Machine cooling circuits controlled • Clamping system, ejector, and core pulls • Clamping plate set; central Ø 125 mm • Minimum installation height 450 mm (extended) • Ejector pressure P/Q controlled (requires T2); ejector cross • Core pulls: • Core pull 1 simultaneous movement (P/Q controlled, programmable) • Core pull 2 simultaneous movement (P/Q controlled, programmable) • Core pull 3 simultaneous movement (P/Q controlled, programmable) • Pneumatic core pull control 4 incl. pressure reducer • Electric core pull control 1 (requires VE 436/00) • Tool pneumatics/hydraulics connections • Electrical connection pneumatic NVD 1 (in tool) • Electrical connection pneumatic NVD 2 (in tool) • Electrical and hydraulic connection NVD 3 (in tool) • Electrical and hydraulic connection NVD 4 (in tool) • Blow-out device 1 with pressure reducer; connection for blow-out device 2 • Cooling water and mold circuits • Shut-off valve for cooling water (inlet); shut-off valve for cooling water (inlet 2) • Cooling water filter 100 µm (inlet) • 3 cooling water circuits to fixed mold plate; 3 cooling water circuits to moving mold plate • Basic equipment for 2nd cooling water distributor (manual) with 7 free cooling circuits • Control and electrics • Selogica direct control; technology level • Fuse protection for heating circuits (1–6 with 16 A) • 15 electrical heating circuits for mold heating • Boost function for heating circuits (hot runner) • Upper guard open, raised to safety clearance • Fault indicator with flashing light • Operator authorization with chip card (EUROMAP 65) • Interfaces and connectivity • Interface for conveyor belt (machine base) • Prepared for six-axis robot with SELOGICA interface • Robot interface (EUROMAP 67), 50-pin • Emergency stop interface (24-pin, 2-channel) • Basic equipment for electric axis control • Host computer interface OPC-UA • Temperature control unit interface (20 mA); temperature control cable HB-THERM • Serial printer interface USB; external USB keyboard interface

Condition: used, Year of construction: 2001, machine/vehicle number: LA15, Used BERTOLASO WDT10 washer dryer - Year 2001Technical Specifications & Performance DataThe Bertolaso WDT 10 is an external bottle washer-dryer engineered for reliable operation in beverage production and industrial packaging environments. It combines mechanical brushing with targeted water jets to remove residues on the bottle body, bottom, and closure area, followed by high-energy air-knife drying. This second hand unit is well-suited for integration within a used bottling line and provides robust construction for continuous-duty applications.Model: WDT 10Manufactured by: BertolasoYear: 2001Speed: 3.000 - 5.000 BPH Function: External bottle washing and dryingWashing system: Rotating brushes with directed water jetsDrying system: Seven blower motors with high-velocity air blades/hot airBottle handling: Infeed worm screw; infeed and outfeed star wheelsConstruction: Stainless steel frame and claddingGuards: Polycarbonate guard doorsElectrical supply: 400 V, 50 HzInstalled power: 20 kWApprox. mass: 2400 kgDocumentation: Complete electrical documentationAdvanced Automation & Control SystemsAutomation is anchored by a Danfoss variable-frequency drive for smooth speed control and Siemens control components for dependable governance of washing and drying sequences. The machine supports manual and automatic operating modes, allowing quick adaptation from setup and maintenance to full automatic production. Electrical specifications include 400 V, 50 Hz with a 20 kW installed load, making it straightforward to integrate into standard industrial power networks. Protective guarding enhances operator safety and visibility during operation.Production Line Integration CapabilitiesThe WDT 10 integrates easily into upstream and downstream bottling equipment thanks to its worm-screw infeed and star-wheel transfer, ensuring consistent bottle spacing and orientation. It is designed for bottle handling in beverage production, whether operating as a standalone module or inline with fillers, cappers, labelers, and packaging machinery. This flexibility supports a range of industrial packaging layouts for PET and glass bottles.Machine Condition & Maintenance HistoryThis second hand external bottle washer-dryer is presented in working condition with complete electrical documentation, facilitating commissioning, service, and spare-parts management. The robust stainless steel construction and established component brands contribute to long-term reliability and maintainability for beverage production environments.Operational Performance & VersatilityThe dual-action cleaning approach—brush scrubbing combined with targeted water jets—ensures thorough external cleaning of cylindrical containers, including difficult areas around the bottom and closure. The drying tunnel uses seven blower motors and air blades to deliver effective surface drying prior to labeling, coding, or secondary pac... Dcodpfs Ady Azox Aiijp

Year of construction: 2006, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: SIMATIC Panel PC, overall weight: 2,100 kg, total width: 1,650 mm, total height: 2,050 mm, product length (max.): 1,200 mm, number of axes: 1, Surface grinding machine manufactured in 2006. This STAEHLI DLM 450 features a lapping wheel diameter of 450 mm and a maximum lapping wheel speed of 110 rpm. It has a robust machine weight of 2100 kg and dimensions of 1200 × 1650 × 2050 mm. If you are looking to get high-quality lapping capabilities, consider the STAEHLI DLM 450 machine we have for sale. Contact us for further details regarding this machine. Dcjdpfxezyp Arj Aiisp - Voltage / Frequency: 400 V / 50 Hz- Max. Current: 50 A- Power Consumption: 26 kW- Wiring Diagram No.: S-2816- Machine Weight: 2100 kg (Nameplate) / Net weight 1900 kg- Dimensions: 1200 × 1650 × 2050 mm- Lapping Wheel Diameter: Ø 450 mm- Lapping Wheel Speed: 0–110 rpm- Max. Lapping Wheel Drive Power: 2 kW- Max. Load on Upper Lapping Wheel: 20 daN- Internal Drive Speed: 0–115 rpm- Max. Internal Drive Power: 0.5 kW- Lapping Wheel Drive Motors (DC Motor): Armature Voltage 260 V, Field Voltage 340 V, Speed 3110 rpm, Power 2 kW, Forced Ventilation 220 V (50/60 Hz)- Internal Drive Motor: Continuously variable DC Motor, Armature Voltage 260 V, Field Voltage 340 V, Speed 3110 rpm, Power 0.5 kW, Forced Ventilation 220 V (50/60 Hz)- Vertical Motion Motor: Stepper motor, 50 steps/sec, Torque 1100 Nm- Ring Gear Adjustment: AC brake motor (2 positions), 380 V / 50 Hz, Speed 700–1400 rpm, Power 0.25/0.37 kW, DC Brake 24 V (16 Nm)- Power Converter: Input 380 V / 50 Hz, Armature Voltage 270 V, Field Voltage 340 V- Worm Gear Ratios: Internal drive i = 1 : 30, Lower system i = 1 : 15.5, Upper system i = 1 : 15.5- Operating Compressed Air Pressure: 6–7 bar- Lapping Fluid Pump: 380 V / 50 Hz, Speed 2600 rpm, Flow rate 57 l/min, Protection class IP 44- Control and Measuring Device: Measuring range ±3 to ±11,000 mm (Millitron manual reference)- Inductive Sensor: Measuring range ±2 mm- Setpoint Adjustment Device: 4-digit display- Control Panel / System: Siemens SIMATIC Panel PC- Control System Processor: Intel Celeron M processor 1.50 GHz- System Memory: 1562624 KB (Ext. Memory), 640 KB (System Memory), 384 KB (Shadow Ram), 1024 KB (Cache Ram)- Hard Disk Storage: 40021 MB (Hard Disk 2)- BIOS / System Date: PhoenixBIOS, BIOS Date Operating System: Microsoft Windows XP Professional / Microsoft Windows Recovery Console

Condition: good (used), Year of construction: 2006, functionality: unexamined, machine/vehicle number: 06 03 1000, Country of manufacture: CH Voltage: 400V Dimensions: 1200 x 1650 x 2050 mm Net machine weight: 1900 kg TECHNICAL SPECIFICATIONS Machine: Disc rotation speed: 0–110 rpm Dcedpsw T Tpdsfx Aiisp Maximum drive power for discs: 2 kW Maximum upper disc load: 20 daN Disc diameter: Ø 450 mm Internal drive rotation speed: 0–115 rpm Maximum internal drive power: 0.5 kW Disc drive motors (continuous motor): Type: DC motor Armature voltage Ua: 260 V Field voltage Ue: 340 V Rotation speed: 3110 rpm Power: 2 kW External ventilation: 220V, 50/60 Hz Internal drive motor: Motor type: smooth operating mid-position control motor Armature voltage Ua: 260 V Field voltage Ue: 340 V Rotation speed: 3110 rpm Power: 0.5 kW Separate ventilation: 220V, 50/60 Hz Vertical drive motor: Type: stepper motor Steps per second: 50 Torque: 1100 Nm Crown gear adjustment: Type: AC brake motor 2 positions Voltage: 380V / 50 Hz Rotation speed: 700–1400 rpm Power: 0.25/0.37 kW DC brake: 24V Braking torque: 16 Nm Power converters: Input voltage: 380V / 50 Hz Induced voltage: 270 V Field voltage: 340 V Worm gear reduction ratio (internal drive): Ratio: i = 1 : 30 Worm gear reduction ratio (lower system): Ratio: i = 1 : 15.5 Worm gear reduction ratio (upper system): Ratio: i = 1 : 15.5 Operating pressure: Air circuit: 6–7 bar Lapping fluid pump: Connection voltage: 380V 50Hz Rotation speed: 2600 rpm Flow rate: 57 L/min Protection: IP 44 Control and measurement device: Measurement range: 6 (±3 to ±11000 mm) See details in Millitron user manual Inductive probe: Measurement range: ±2 mm Setpoint adjustment device: Display: 4 digits Unless stated otherwise, all technical data are provided without guarantee and subject to change or error.

Condition: refurbished (used), workpiece weight (max.): 40,000 kg, table diameter: 2,500 mm, spindle speed (max.): 100 rpm, spindle speed (min.): 10 rpm, grinding spindle motor power: 24,000 W, outer diameter: 3,000 mm, overall weight: 40,000 kg, GEAR HOBBING MACHINE PFAUTER model P3001 New Siemens PLC with touch panel Spindle diameter: 2,500 mm Maximum workpiece diameter: 3,000 mm Maximum module: 25, in a single pass on C45 steel with a tensile strength of approximately 60 kgf/mm² Minimum number of teeth: 25 Maximum axial travel: 1,200 mm Table bore diameter: 500 mm Number of T-slots on the table: 12 Maximum table load: 40 tons Maximum gear hob diameter: 450 mm Tangential travel of the gear hob: 300 mm Gear hob rotation speed: 10–100 rpm, continuously variable across three ranges Main motor power (DC): 24 kW Weight: approximately 40,000 kg Complete with: - New electrical panel Dedpo Adua Uofx Aiiocp - Internal gear hobbing head complete with gears, worm gears, and modules – overhauled - Overhauled ball screw - Overhauled guides - Tool holder slide - Double worm gear - Tool loading hoist - Tailstock - Hydraulic table clamping USED MACHINE, OVERHAULED

Condition: excellent (used), 1 roller table 3.0 m long x 0.77 m wide with 7 support rollers, with pneumatic lifting/adjustment chain with worm gear and bellows cylinder, with a timber transfer roller carriage with rubber turntable for 1-man timber feed, with 2 lift-up stop rollers for planks from the band saw that have already been trimmed on one side. 1 roller table 3.5 m long x 0.77 m wide with 8 support rollers, with or without transfer roller carriage. Dcjdpfx Aist E Nw Teiop Original PAUL roller tables in various widths and lengths, available in standard or heavy-duty versions for use in front of cross-cut, trimming and re-cutting circular saws; short work tables allow, for example, the transfer of material from the cross conveyor, passage through the table assembly or the loading of heavy beams by forklift; long work tables are also available in various dimensions

Condition: used, Holac Industrial Dicing Machine – VA Series (VA 90 / VA 120) Manufacturer: Holac Type: Industrial Dicing / Cubing Machine Model: VA Series (exact model to be confirmed) Availability: Direct Description This Holac industrial dicing machine is designed for high-capacity and precise cutting of a wide range of food products. The machine is equipped with a robust worm feed system, ensuring consistent product flow and uniform cutting results. Suitable for cutting products into cubes, strips or slices, depending on the installed knife set. Ideal for meat, cheese, vegetables and plant-based products. The machine is fully stainless steel, hygienically designed and easy to clean. Equipped with an original Holac Panelware control panel. Key Features - High-capacity industrial dicing machine - Continuous worm feed system - Interchangeable knife grids for different cutting sizes - Suitable for fresh and lightly frozen products - Solid stainless steel construction - Reliable and proven Holac technology Technical Specifications (approx.) - Capacity: up to 1,500 – 3,000 kg/hour (product dependent) - Cutting sizes: approx. 5 x 5 mm up to 40 x 40 mm - Product temperature: fresh to approx. -2 / -3 °C - Power supply: 400V / 50 Hz - Installed power: approx. 5.5 – 7.5 kW Dcodpex Ti Hmsfx Aiisp - Material: stainless steel (food grade) Applications - Meat (fresh or lightly frozen) - Cheese - Vegetables - Plant-based products - Convenience & pet food - Machine is in good working condition and ready for production. Video available on request. 📍 Located in the Netherlands 🌍 Worldwide delivery possible The information contained in this advertisement is for general information purposes only. Although care has been taken to ensure accuracy, no liability is accepted for any errors or omissions. Specifications are subject to change. More photos and full specifications: /

Year of construction: 2019, condition: ready for operation (used), A Frenco workshop gear testing device is available. Bed length: 590mm, min. center distance: 45mm, max. center distance with fine adjustment/without fine adjustment/without intermediate plate: 105mm/155mm/320mm, repeatability: 1.5µm, intermediate plate length: 210mm, max. worm diameter: 78mm, center distance (worm lengths): 0mm-220mm, measuring table dimensions X/Y/Z: 800mm/700mm/940mm. Machine dimensions X/Y/Z: approx. 1200mm/800mm/1750mm, weight: approx. 330kg. Documentation available. An on-site inspection is possible. Dsdpfxsy Ax Ths Aiijcp

Year of construction: 2021, condition: used, Tube manufacturing line Manufacturer: Bazhou Wanxin Industrial and Trading Tube manufacturing line consisting of: Double-station unwinding device Function: Unwinds the coil passively Design: 2-station design with 180-degree rotation, manual expansion Advantages: Fast loading, simple and convenient operation Hydraulic shear and butt welding machine Function: Cuts off the front and rear ends, centers the strip, and welds the strip back together Design: Manual hydraulic shear with cantilever, front and rear pressure rollers, front and rear centering rollers, welding device Cutting method: hydraulic shear Press material method: double-cylinder press Welding method: manual welding Strip storage device Function: To ensure continuous production of the welded tube, a storage unit must be installed after the shear and butt welding platform so that the storage unit can continuously feed the strips while the strip steel material is prepared for stacking, unwinding, butt cutting, and welding. Design: Frame type, with moving and fixed frames (including feeding device) Feeding speed: max. 120 m/min Storage speed: max. 200 m/min Length of stored strips: 200 - 400 m Pinch roller motor: AC 11 kW Forming and sizing machine Working height: +850 mm Power: AC/DC motor: 160 kW, 1000 - 2000 rpm Reducer: Gear hardening Arrangement: Passive five-roll straightening machine, vertical rolls for feeding material, forming through 7 horizontal roll stands and 8 vertical roll stands, guiding, pressing, deburring, cooling, and sizing through 6 horizontal roll stands and 5 vertical roll stands, 1 round sizing stand Round sizing stand: 1 set of smoothing device, two sides with 8 rolls each, 4 rolls per side. 30 mm, 40cr, quenching, tempering, and hardening Dcjdpszuz H Sjfx Aiiop Horizontal roll shaft: 60 mm, bearing at position 55, made of material 40Cr Heat treatment of horizontal roll: surface hardening, HRC 50-55 Bearing guide: forged steel 45# Vertical roll shaft: 40 mm, material 40Cr, quenched, tempered, and hardened Vertical and horizontal rolls - Design: Portal design, opening width: 120 mm, clamping of horizontal roll stand: adjustment via worm gear Material of horizontal and vertical roll stands: welded (aging annealing) Gearbox: Gear: Spiral bevel gear Shaft of pinch roll: 50 mm, 2 rolls for pinching, adjusted via a manual screw rod Guide shaft: 40 mm Deburring knife: 2 pcs., one for working and one as a spare Cooling tank Cold cut-off saw Function: The cold cut-off saw is one of the most important machines in the ERW tube line. It can cut the tubes to the preset length during high-speed production. Type: KK-5-50 Tube diameter: Round tubes 16-63.5 mm and corresponding square and rectangular tubes Length cut: any length between 1 - 6 m Material thickness: 0.6-2.5 mm Drive motor: 11 kW servo Yaskawa Feeding motor: 2.9 kW serco Yaskawa Saw motor: 11 kW, AC motor with frequency converter Feeding method: Servo multi-stage speed feed Speed adjustment: max. 110 m/min Clamping force: pneumatic Drag chain Saw blade: 400 mm Saw gearbox model: KK-80 Saw stroke (device length): 3 m Device dimensions: 4500 x 1500 x 1300 mm Conveyor track, table, and packaging machine Function: The formed tubes are automatically removed from the roll.

Condition: new, functionality: fully functional, grinding wheel diameter: 275 mm, mount diameter: 160 mm, 2 new, unused grinding wheel flanges Reishauer part no. 211619.00 for grinding worms Ø275 / 160x160 for Reishauer grinding machine RZ160 / RZ260 Flange for mounting grinding tools with a bore diameter of 160 mm and a width of up to 160 mm 300x160x160. Dodpfx Aisx Eiyceijcp Price negotiable. Our asking price per piece is €1,270.00 net ex works, plus packaging costs. All technical specifications are subject to typographical errors and omissions. Sale exclusively to countries within the EU.

Condition: used, Year of construction: 2026, Overview This Ferrero AV 9/12/1VA automatic triblock, built in 2026, is designed for filling vegetable edible oil into Marasca-type glass bottles. The block combines a 9-clamp air rinsing station, a 12-valve high-vacuum filling station and an AROL EAGLE VA-IES single-head capping station for ROPP 31.5 x 24 mm aluminum screw caps in one compact AISI 304 stainless steel machine with a nominal output of 2,000 bottles/hour (750 ml). The machine is new and unused. Format tooling for four Marasca sizes (250 / 500 / 750 / 1,000 ml), nitrogen injection before capping, a 7-inch Siemens SIMATIC HMI touchscreen in English and remote diagnostics via Ethernet are included - ready for immediate use. Please note: an optional mechanical caps elevator is available on request; it is not included in the sale price. Technical data Dsdpfxjzkkp Ij Aiiecp - Manufacturer: Ferrero (Italy) - Model: AV 9/12/1VA - Year of manufacture: 2026 - Machine type: rinser - filler - capper triblock for glass bottles - Product: vegetable edible oil, ambient filling temperature - Rinsing: 9-clamp air rinsing turret - Filling: 12-valve high-vacuum filling turret - Capping: AROL EAGLE VA-IES single head, ROPP 31.5 x 24 mm aluminum caps - Capacity: 2,000 bottles/hour nominal (750 ml) - Bottle formats: Marasca 250 / 500 / 750 / 1,000 ml (tooling included) - Bottle diameter range: 55 - 110 mm; height range: 180 - 350 mm - Control: 7-inch Siemens SIMATIC HMI touchscreen (English) - Electrical supply: 400 V three-phase, 50 Hz; 8 kW installed power - Compressed air: approx. 435 Nl/min at 6 bar - Construction: AISI 304 stainless steel; CE marking Equipment - Air rinsing station with AISI 304 grippers, EPDM pads and maintenance-free TWIST rotation - High-vacuum filling station in AISI 304 and food-grade materials, steam or chemical sterilizable - Polished AISI 304 product tank with level indicator, height adjustment and tool-free lid - AROL capping station with vibrating cap dispenser, cap level detector and missing-cap detection - Worm screws, star wheels and conveyors for Marasca formats - Nitrogen injection before capping (gas supply by the customer) - Photocells at inlet and outlet, remote diagnostics via Ethernet - Full AISI 304 safety enclosure with LEXAN inspection doors and safety microswitches Condition New - built in 2026. The machine can be viewed and tested in operation on request. Availability Immediately available. Location: Italy.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 8,733 h, functionality: fully functional, spindle bore: 26 mm, rotational speed (max.): 7,200 rpm, number of axes: 5, number of tool turrets: 2, Long-turn lathe with an extended accessory package and spare parts! Counter-spindle: Completely re-conditioned 05/2026 TECHNICAL DETAILS CNC control: GE Fanuc Series 18i-TB Number of axes: 5 Axes: X1, X2, Y, Z, C Spindle Spindle speed: 50–7,200 rpm Spindle bore: 26 mm Spindle stroke: 160 mm Djdsztn Imepfx Aiijcp TURRET Number of turrets: 2 Positions per turret: 6 MACHINE DETAILS Motor power: 3.7 kW Weight: 2,600 kg Spindle hours: 8,733 h Control on: 10,642 h Feed time: 3,257 h Part counter: 478,135 EQUIPMENT - Bar feeder FMB Turbo 3-36, year of manufacture 2011 - Chip conveyor - Package of fixed and powered tool holders - Package of collets and guide bushings - Discharge system for long parts including reduction sleeves - Double-cone clamping system on the main spindle, system JBS - Breakage detection for cut-off tools, Detector France - Ejection control, Detector France - JBS guide bushing, not yet installed - Tool presetting device with optics for external tool setup - Replacement worms for chip conveyor - Mounting device for adjusting the cylinder of the working hood - Various spare parts

Condition: ready for operation (used), Year of construction: 2013, operating hours: 1,000 h, This REIFENHÄUSER BI Trudes 115 was manufactured in 2013. Ideal for pipe extrusion, this machine represents a robust addition to any production line. Contact us for more information. Additional equipment • 2x electrical melt pressure transducer 1/2 “UNF diaphragm pressure transducer • 2x ground temperature sensor with sword probe Dcodpfox D Ewmox Aiisp Machine Benefits Qualitative Machine Benefits • 13x anchoring for one fixing point installation tool • Pair of worms, compact version, made of highly tempered steel and bimetal design • Counter-rotating twin-screw extruder, gearbox with integrated back pressure bearing for 350 bar • Recirculating oil lubrication with oil pressure and oil temperature monitoring • Barrel Ø 115-30 d with atmospheric and vacuum degassing openings • Heating and air cooling divided into 5 zones, total output of 56400 w • Vacuum unit for bt 115 including 2x vacuum unit and vacuum suction unit • Complete screw temperature control including cassette installation • Mains supply with main switch and load disconnector for heating, drives, and auxiliary voltages Technical Machine Benefits • Stationary for an extrusion height of 1000 mm • Complete control cabinet with all necessary control and regulation equipment attached • Microprocessor-controlled multi-channel controller for two and three-point zones • Adaptive and self-optimizing control behavior • Fault messages with collective alarm and storage • Siemens mp377 touch panel for setpoint specification and actual value display • Recipe management of up to 20 recipes • Drive with one ac motor, vector-controlled • Digital drive controller for ac motors, with full digital technology • Motor temperature monitoring with pre-warning and shutdown Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 1996, filling capacity 400 Liter Usable Volume 300 Liter filling amount max. 850 kg workpiece sizes max. 850 x 200 mm Individual weight of workpiece max. 30 kg turning speeds 4.0 - 15.0 U/min Inner drum width 925 mm drive motor 380 V weight of the machine ca. 1950 kg. range L-W-H 3100 x 1600 x 2000 mm good / well-maintained condition (!!) - in checked conditions - machinevideo - ?v=xxnCddCmXe4 Description: - LIMA cleaning machines * for long concrete formwork parts, formwork clamps * for flame-cutting parts, plasma-cutting parts, laser-cutting parts * for punching and sawing parts - environmentally friendly, cost-saving, low-noise - drive with 5-fold V-belt via worm gear - maintenance-free spherical roller bearings - entire machine is highly soundproofed - dust extraction installed as standard - drum running time adjustable - speeds variably adjustable - the drum can be moved into any position using jog mode - space-saving thanks to compact design - extraction system built into the machine - single-lever drum quick release - machine bearings on vibration dampers - spacious unloading area, suitable for Euro standard containers - free access for forklifts or pallet trucks Working method: - the parts to be processed are moved by their own friction . deburred, descaled and derusted. - the closed design reduces the noise generated during deburring . to just 68 - 72 dB(A). - a direct-acting dust extraction system automatically removes . the dust generated during processing. - the machine can also process oily punched and sawn parts. - during this processing, additional sawdust is added to the drum. - a time delay switch switches the dust extraction system on individually. - the parts are thus deoiled and dried first. - only after this process does the dust extraction system switch on Dodpfx Aiezcqzijijcp . automatically to suck the sawdust out of the drum. - by specifying the drum speed, optimal processing is guaranteed. - the LIMA-400 L deburring machine can be set up anywhere, . provided there is a solid surface/foundation. - after the work is complete, the drum remains in the position. . so that the drum flap can be opened quickly. - one work cycle takes about 20 minutes.

Condition: excellent (used), Year of construction: 2019, Geared motor, electric motor, electric geared motor, worm geared motor, flat geared motor -Condition: Geared motor is unused -Manufacturer: NORD DRIVESYSTEMS, Flat gearbox series F -Type: SK7382AZH-180MP/4 TF -Speed: 22 rpm -Power: 18.5 kW -Protection rating: IP55 -Hollow shaft: Ø 70 mm Dcsdpfxszu S Hps Aiiep -Dimensions: 930/450/H660 mm -Weight: 410 kg

Condition: used, Year of construction: 2005, Name: Sludge dewatering centrifuge used Manufacturer: Huber Type: RoD 1500 Year built: 2005 Driving force: 18,5 kW Throughput m³/h: 12 m3/h Dcjdpoy Edfbofx Aiiep Permissible sediment density: 1,2 kg/dm³ Max. bowl speed: 4000 rpm Inner diameter drum: 365 mm Material: Stainless steel Dimensions: L 2800 x W 1000 x H 1100 mm Empty weight: 3000 kg Technical doc.: Yes Message: Immediate availability, Worm drive: Viscotherm Rododiff 10715, Hydraulics B/C 7.5 -16 Z HP Accessories: Control cabinet and a hydraulic system Condition: Second hand Price: On demand

Condition: used, Year of construction: 2001, Technical details: max. wheel diameter: 80/120 mm max. module: 2,5 max. top circle diameter: 65 mm : 22 mm : 140 mm : 120 mm slide travel axial ( Z-axis ): 320/400 mm Dimensions (L/W/H): 3270 x 3240 x 2020 mm weight of the machine ca.: 6 t P60 - The compact all-rounder for wheels, shafts and worms The P60 is the smallest machine in the Gleason line of horizontal hobbing machines. The all-rounder not only mills spur gears with all rollable profiles, but is also the optimal solution for machining steering pinions and worms. with automatic loading system, extraction unit, chip conveyor, with balancing device with 2 tailstocks, with Artec process monitoring system, type CTM-BT1.1 Dcjdpfjxrwpksx Aiijp *

Condition: used, Year of construction: 2008, control Siemens 840D Hobbing Machines for Large Gears Flexible and Versatile Gear Hobbing Gleason’s large hobbing machines offer maximum productivity for roughing and finishing operations on cylindrical gears for many industries: wind turbines, industrial gearboxes, mining, and shipbuilding, gear machining, and many more. The guideways are wide and feature hydraulically preloaded guides, which are used in combination with a separate linear guide and backlash- free rollers. This ensures precise slide movements with every feed. The design of the worktable ensures optimal conditions for absorbing and transferring cutting forces to the machine base. The use hydrostatic table bearings, combined with the proven backlash-free double-worm gear, guarantees precise table movements and the highest flatness and concentricity accuracies of the worktable. This holds true regardless of significant fluctuations in workpiece weight and/or high machining forces. The motorized gear hobbing heads for external and internal gear cutting are designed to meet the Dcodpfjwzypnjx Aiiop requirements of modern cutting tools. All machine sizes can be equipped with both external and internal gear hobbing heads. The power range of the drive takes future tool developments into account. Naturally, the gear hobbing head drive is also backlash-free. These machines are particularly well-suited for use with state-of-the-art cutting materials. >> dry only, 1 chip conveyor, table diameter 1,870 mm