Used Gearmotors for sale (48)

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, power: 18.5 kW (25.15 HP), -300 mm x 2600 mm max. timber cross-section -circular saw blade D 900 mm determination of the value 8.000 € new flat motor 18.5 kW / 1450 r/min with flange 4.300 € new positioning gearmotor 1.700 € new circular saw blade AKE D 900 mm, Z 120, 10% discount 8.500 € new electrical control cabinet 22.500 € without steel construction and without assembly -the special saw was only used for about 5 hours after the overhaul >>Made in West Germany 100% massive steel construction with movable portal and mounted saw unit from above, circular saw motor 18.5 kW, 1450 rpm with electronic brake travel drive 2.5 kW with frequency converter, travel speed infinitely variable saw blade max. D 900 mm, cutting height max. approx. 300 mm if the saw unit is in the basic position, the circular saw blade is in a lower protective hood and Itodpocbq Nwofx Affer completely covered. machine overhauled without additional safety devices >> The working width can also be increased by conversion

Condition: used, Year of construction: 2001, Lippert belt conveyor ascending belt GF 4920-550-400 RA1606 The Lippert belt conveyor is from 2001 and in a good (used) condition. The belt conveyor has a SEW brand motor with MOVIMOT frequency converter to control the speed. Side guides and/or light barriers can be mounted on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures shown of the conveyor system were taken in a logistics center while it was still installed. Technical data: Conveyor length (NL): 4920 mm (leading belt + ascending belt with bend and upper straight) stand width (NB): 550 mm belt width (GuB): 400 mm overall height (BH): 105 mm support feet: optional Conveyor speed (v m/s): adjustable up and down with frequency converter Drive: SEW gearmotor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Idler pulley (UR): Ø = 81 mm Drive pulley (AT): Ø = 131 mm Belt: Type XVT-2128 Year of manufacture: 2001 incline / decline: adjustable Optionally available: Supports Side guides one and both sides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Itsdpfek Abd Nex Affjr For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: new, SEW WAF20 DRS71M2BE05/ACE8/TF/AS7W/LN helical gearmotor, serial no.: 01.1764836401.0001.12, unused, 100% functional, delivery as per photos. Iedpfxox Dudcs Affjtr

Condition: new, Device designed for inclined transport of products over a specified distance and height * Modular, solid, food-grade conveyor belt with straight cleats * Discharge height: 3,830 mm * Discharge width: 700 mm * Straight cleats H=50 mm, spaced every 200 mm * Belt working width: Br=520 mm * Infeed height: 640 mm * Infeed hopper dimensions: 870 mm x 720 mm * Length of lower horizontal section: 800 mm * Length of upper horizontal section: 500 mm * Belt guided on steel sliding rails * Belt supported by sides on return * Belt speed adjustable via frequency inverter – potentiometer on control panel * Fixed plastic side guards * Covered idler roller * Device equipped with trays at the bottom * Structure mounted on height-adjustable feet * Swivel castor wheels for easy positioning * Drive via gearmotor suspended on the drive roller shaft Iedpfxsx A Iuxe Affjtr * Acid-resistant (stainless) control panel

Condition: used, functionality: fully functional, “Belt Conveyors“ for Sale -1Pc. Belt Conveyor . Belt Widthness: 2.700 mm. . AA.: 3.050 mm. . With 2,2 KW Gearmotor . -1Pc. Stadler Anlagenbau Gmbh . Sorting Conveyor Belt . Belt Widthness: 1.600 mm. . AA.: 9.000 mm. . With SEW Gearmotor. -1Pc. Belt Conveyor . Belt Widthness: 1.200 mm. . AA.: 6.800 mm. . With 3 KW SEW Gearmotor and Permanent Magnetic head pulley. -1Pc. Dosing belt . Belt Widthness: 1.200 mm. . AA.: 2.400 mm. With 3 KW Gearmotor. -1Pc. Beerepoot Dosing belt . Type : BE . Belt Widthness: 1.200 mm. (Trough-Shaped) . AA.: 2.000 mm. Without motor. -1Pc. Belt Conveyor . Belt Widthness: 1.000 / 1.200 mm. (Without belt) . AA.: 6.600 mm. With 4 KW Motor and Gearbox. -1Pc. Belt Conveyor . Belt Widthness: 1.000 mm. . AA.: 5.750 mm. With SEW Gearmotor. -1Pc. Dosing Belt . Belt Widthness: 1.000 mm. . AA.: 2.100 mm. With 1,5 KW Gearmotor. -1Pc. Belt Conveyor . Belt Widthness: 900 mm. . AA.: 5.550 mm. With 2,2 KW SEW Gearmotor. -1Pc. Belt Conveyor . Belt Widthness: 800 mm. (Through-Shaped) . AA.: 7.200 mm. . With 11 KW SEW Gearmotor and Belt-Scraper . -1Pc. Belt Conveyor . Belt Widthness: 800mm. AA.: 6.700mm. With 3 KW SEW Gearmotor and Belt-Scraper . -1Pc. AMB Belt Conveyor . Type: FB1 GBF 08/2.25 . Belt widthness: 800 mm. . AA.: 2.250 mm. With 1,5 KW SEW Gearmotor. -1Pc. Belt Conveyor . Belt Widthness : 750 mm. . AA.: 2.900 mm. . With 2,2 KW Motor. -1Pc. Belt Conveyor . Belt Widthness: 600 mm. . AA.: 6.600 mm. With 2,2 KW SEW Gearmotor and Side-guide. Itjdeu Tkt Dopfx Affjr -1Pc. Beerepoot Belt Conveyor . Type: BE . Belt Widthness: 600 mm. (Trough-Shaped) . AA.: 6.600 mm. With 1,5 KW SEW Gearmotor. Tube-construction with Side-guiding. -1Pc. Dosing Belt . Belt Widthness: 500 mm. AA.: 1.000 mm. With motor. -1Pc. Belt Conveyor . Belt Widthness: 300 mm. (Without belt) . AA.: 2.850 mm. Without motor. -1Pc. Belt Conveyor . Belt Widthness: 190 mm. . AA.: 4.750 mm. With 1,1 KW SEW Gearmotor.

Condition: ready for operation (used), Belt Conveyor SBM Austria Brand: SBM Austria 7 pieces on stock: *nr1= A-A  length: 13.100 mm, Beltwidth: 650 mm, Driving: gearmotor 4 kW. *nr2= A-A  length: 9.200 mm, Beltwidth: 650 mm, Driving: gearmotor 4 kW. *nr3= A-A  length: 7.500 mm, Beltwidth: 1000 mm, Driving: gearmotor 5,5 kW. *nr4= A-A  length: 21.000 mm, Beltwidth: 1000 mm, Driving: gearmotor 7,5 kW. Iodpfoxymdgsx Affotr *nr5= A-A  length: 12.600 mm, Beltwidth: 800 mm, Driving: gearmotor 5,5 kW *nr6= A-A  length: 12.600 mm, Beltwidth: 800 mm, Driving: gearmotor 5,5 kW *nr7= A-A  length: 18.000 mm, Beltwidth: 800 mm, Driving: gearbox 7,5 kW

Condition: excellent (used), Gear motor, electric motor, electric gear motor, stainless steel motor, stainless steel gear motor, stainless steel bevel gear motor Gearmotor: SEW-Eurodrive type SA87R57DRN80M4 -Speed: 17 rpm -Power: 0.75 kW -Hollow shaft: Ø 60 x 250 mm -Protection class: IP54 -Dimensions: 840/310/H370 mm Iedpfx Afsw A Abiofotr -Weight: 128 kg

Condition: used, Year of construction: 2001, Transnorm spiral helix belt curve conveyor left 85°-775-550 IR600 RA1658 The Transnorm belt curve conveyor is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included. These are optionally available on request. Belt curves are frequently used in intralogistics for the internal transport of unit loads and are an indispensable part of modern distribution centers. Transnorm belt curves impress with performance and reliability. Thanks to a low-tension drive, over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the smoothest possible running. Technical data: Type designation: belt curve conveyor TS 1600-105 Conveyor length middle radius (NL): 1703 mm frame width (NB): 775 mm belt width (GuB): 550 mm overall height (BH): 210 mm inner radius (IR): 600 mm Conveying angle: 85° degrees (coiled 175mm rising) Incline: 175 mm / 85° = 741,2 mm / 360° Support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gearmotor SA37/T DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Itjdpfxok Abfbj Affjr For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2019, operating hours: 4,000 h, functionality: fully functional, machine/vehicle number: BP 500 A, DESCRIPTION BRIQUETTING PRESS This press is intended for compressing secondary raw materials into briquettes (briquette shape: rectangular). Technical specifications of the press: Dimensions: Length: 1800 mm (2100 mm for transport) Width: 1800 mm (2000 mm for transport) Height: 1900 mm (2200 mm for transport) Iodpfx Aexmav Neffjtr Net weight: 2945 kg Power supply: 380 V, 50 Hz, 33 kW, 70-100 A Output capacity: 450 kg/h (+/-50 kg depending on raw material type and fraction) Noise level: A-weighted sound pressure level at operator’s station: 77.8 dB +/-5 dB Compression pressure: Minimum: 1000 kg/cm² Maximum: 1700 kg/cm² Pressure: Max. 300 bar Raw material moisture content: No more than 14% Briquette dimensions: Width: 150 mm Thickness: 60 mm Length: 40-105 mm Permissible ambient temperature for operation: -20°C to +35°C (up to +50°C with additional cooling system) The press consists of: Electrical system – controls the hydraulic press system. There are four electric motors: the first (30 kW) drives the main hydraulic pumps, the second (1.1 kW) powers the cooling hydraulic pump, the third (0.55 kW) drives the cooling fan of the oil system, and the fourth (1.5 kW) drives the sawdust feed screw. The operation of the motors and hydraulic valves is managed via contactors and intermediate solid-state relays by a microprocessor with expansion modules. For visualization and parameter adjustment, a liquid crystal display with buttons is provided. Hydraulic system – manages the operation of hydraulic cylinders using pumps, high- and low-pressure valves, solenoid valves, and hoses. There are three hydraulic cylinders: the first is the main cylinder for compressing sawdust, the second is a vertical cylinder for initial sawdust compaction, and the third is a forming cylinder for moving the briquette form. Also installed are an oil cooling system with a pump and air cooler. Oil filtration is performed by the main high-capacity filter, a filter for the cooling system, and a fine filtering unit. Feeding of raw material into the press is performed by an integrated loading hopper. The raw material in the hopper is mixed intermittently to prevent bridging. The mixer is driven by a chain from the auger gearmotor. The auger cyclically feeds the material to the shaft of the vertical cylinder. The hopper is equipped with two level sensors – lower and upper. When the hopper is enlarged, the sensors can be repositioned as needed. Control – dual-mode, manual and automatic, is provided. All control equipment is mounted in the electrical cabinet. Automatic control constitutes the normal press operation without operator intervention. Manual control is used for press setup, troubleshooting, returning the cylinders to their home positions, or in emergency situations. Operation is facilitated by a display located on the cabinet door. It allows for viewing and adjustment of input parameters, as well as real-time monitoring of press status and error messages.

Condition: new, functionality: fully functional, machine/vehicle number: 01.1274197402.0001X08, power: 4 kW (5.44 HP), rotational speed (max.): 1,420 rpm, input frequency: 50 Hz, type of input current: AC, overall weight: 101 kg, protection type (IP code): IP54, Multiple available. Operating mode: S1 (continuous operation) Voltage (V): 230 (rated voltage of the motor in delta operation) Current (A): 15.20 A Insulation class: F (higher temperature resistance of the insulation) Mounting form: IM M1AB Braking torque: 75 Nm The SEW-EURODRIVE Itedpfx Afou Dkv Nefjr K77 DV112M4/BMG/HR/TF/ASB8 gearmotor is a powerful and reliable drive solution that is ideal for demanding industrial applications. With a rated power of 5.5 kW and an operating voltage of 400 V, this motor offers high efficiency and excellent torque. The integrated bevel gear ensures a compact design and enables optimum power transmission, while the robust construction guarantees durability and reliability. This geared motor is particularly suitable for use in conveyor systems, mechanical engineering and automation technology where precision and performance are required.

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 1/10/2025, control cabinet height: 1,000 mm, Extruder FI 25, 3 cylinder heating zones + 2 die head heating zones, versatile application with a nitrided plasticizing unit. - Nitrided plasticizing unit, 25 mm diameter - Barrier screw with mixing tip (for rigid PVC), - Screw output torque 236 Nm - maximum screw speed 152 rpm - Screw start interlock to prevent start-up under insufficient heating - Cylinder fitted with hopper zone cooling (liquid-cooled) - 3 cylinder temperature regulation zones - Extrusion output with die Ø8: 25 kg/h - Heating and cooling system (band heaters, cooling fan) Ijdpfx Afsxtf Hgsfstr - Lenze gearmotor with 4 kW motor - feeding - Stepless adjustment via potentiometer on frequency inverter - Temperature regulation via Omron controllers with full control - Heating element current measurement - heater burnout detection - Heating tuning function PiD - type "J" thermocouples - Die head with 2 heating zones without cooling

Condition: ready for operation (used), SBM Austria Screening machine with discharge conveyor Brand: SBM Austria Itjdexymdtepfx Affer Screen surface : 3500 x 1300 mm – 1 deck. Driving: E-motor 7,5 kW. Incl. steel support. Discharge conveyor SBM Austria A-A  length = 11000 mm, Beltwidth: 800 mm. Driving: 7,5 kW Gearmotor.

Condition: good (used), Geared motor, electric motor, electric geared motor Itodpfx Asgx Al Ajffor -Manufacturer: SEW-Eurodrive, gearmotor type WAF20 DR63S2/TF -Speed: 332 rpm -Power: 0.18 kW -Hollow shaft: Ø 20 x 100 mm -Flange: Ø 110 mm /Shaft Ø 15 x 30 mm -Protection class: IP55 -Number: 2x gear motors available -Price: per piece -Dimensions: 360/190/H250 mm -Weight: 7.7 kg/piece

Condition: used, Year of construction: 1998, Transnorm belt conveyor 650-600-500 RA2194 Technical data: Manufacturer: Transnorm Type: TS 1100 belt conveyor Year of manufacture: 1998 Condition: good (used) Motor: fully functional conveying length (FL): 650 mm nominal/outer width (NB): 600 mm belt width (GB): 500 mm overall height (BH): 80 mm motor height (MH): 545 mm Motor type: SEW-Gearmotor Motor power: kW 0.37 230/400 V 50Hz Conveying speed: contact us Weight: 80 kg Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Itsdpfx Afjq Imt Rsfer Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: like new (used), functionality: fully functional, - Heavy duty gearmotor 11 kW Itedpfoxqnunjx Affor - Secondary speed is 20 rpm - weigth 422 kg - this gearmotor has been came unnecessary

Condition: used, Modular labeling machine 10 heads Modular labeling machine Cold glue •   4 stations: Front/back, seal L, neck ring   self-adhesive •   3 stations: Front/back, neck ring Bottles : round/square Label stations nr.: N. 3 self-adhesive stations N. 3 Cold glue stations Central diameter Ø: Ø 960 Plates nr.: 10 Length of the labels  min/max: 10/150 Height of the label  min/max: 15/200 Container diameter/height min/max: Ø 30/80 mm – Altezza min/max 100/400 mm Plate transmission Motorized plate Optical centering Yes Special inlet stars Iodpsvgudfefx Affjtr No. 3 multi-format in/out stars D 50->120 mm Industria 4.0 yes predisposed other request Double screw input in phase Max speed request: 6.500 bph Modular labeling machine: basic machine composition 1. System built according to CE regulations 2. Machine operation via PLC (Schneider) 3. Touch-screen control panel for labeler functions installed on a mobile and rotating support 4. Automatic variation of production speed with inverters and detection sensors installed on the conveyor belts 5. Light column indicating the operating status of the labeler 6. Electrical cabinet fixed internally to the machine body. 7. Accident prevention protections consisting of: ➢ On the screw front, with two swing doors ➢ On the labeling station front, single-part circulars a vertical lift 8. Height-adjustable upper head for different containers with gearmotor, panel adjustment, and automatic stop limit switch 9. Plate rotation via electronic cams 10. Shaped plates 11. The transmission between the plate and the motor occurs via a maintenance-free gear reducer 12. Quick plate change 13. The body of plates removable from the lower carousel (complete with all their transmission) 14. Double inlet auger with stop-in phase 15. N. 3 40M adhesive labeling stations, including: · Stepper motor · Machine stops after two labels are missing on the reel · Memory for 200 different labels · Automatic missing label recovery function · 4-axis adjustment system, without tools · Reel exhaustion sensor · Standard photocell for labels FOR TRANSPARENT 16. L-shaped sealing pliers with 4 DIVISIONS 17. N.3 Cold glue labeling station, type: 2-2-150, including: · Motorization with servomotor · Automatic glue film adjustment · Automatic washing of the drum tweezers for label removal. · Glue pump · Forced oil lubrication · No greasing points · Radial and tangential adjustment with machine in production · MANUAL GROUP HEIGHT ADJUSTMENT WITHOUT HEIGHT CHANGE 18.

Condition: excellent (used), functionality: fully functional, Stainless steel high conveyor vertical side with deep feed hopper and exit hopper, brand Franz Tölke; impeccable technical and optical condition; conveyor belt with scrapers in perfect condition, power supply 380 V, 50 Hz, Flender Himmel Z30-LK2 with speed reducer gearmotor, power 0,37 kW, 1,370 RPM, nmin = 21,6 1/min, T2 min= 22 Nm, T2max =11,5 Nm. Total height 2,370 mm, wight = 500 mm, length = 1,850 mm Sales price: 2.500 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Iodpetgxrijfx Affstr Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 2018, Geared motor, electric motor, electric geared motor, spur geared motor -Manufacturer: SEW-Eurodrive, helical gearmotor -Type: R97/II2GD EDRN160L4/3GD/TZF/AL i18.24 Isdpfxot Drkyo Affstr -Speed: 1474/81 rpm at 50 Hz, see photo type plates -Power: 15 kW -Shaft: Ø 60 x 120 mm -Protection class: IP54 -Dimensions: 970/400/H370 mm -Weight: 231 kg

Condition: used, Year of construction: 2013, Kersting plastic chain conveyor belt conveyor conveyor Inclined conveyor washing GF 3350-720-620 RA1974 Technical data: Conveying length (NL): 3350 mm Framework width (NB): 720 mm belt width (GuB): 620 mm Iedpfxok Abpae Affjtr Height/band run (BH): from 920 mm to 1250 mm rising +/- 50 mm height adjustment Conveying speed (v m/s): pleas contact us with you needed Speed Drive: DEW- Gearmotor Electrical data: 400 V / 50 Hz / 0,37 kW Belt: plastic chain with toothwheel drive Year of construction: 2013 Special feature / accessories: Drip tray to catch the washing water All prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With best regards, your team at Dr. Sonntag GmbH & Co. KG - Your specialist and contact for intralogistics

Condition: excellent (used), Geared motor, electric motor, electric geared motor, worm geared motor, bevel geared motor, bevel geared motor -Condition: unused Isdot Ult Aepfx Affotr -Manufacturer: SEW-Eurodrive, bevel gearmotor with brake -Type: K77 DRE132MC4BE11/TF -Translation: i= 7.24 -Speed: 203 rpm -Power: 7.5 kW -Protection class: IP55 -Shaft: Ø 50 x 100 mm on both sides -Brake: 55 Nm -Number: 1x motor available -Price: per piece -Dimensions: 860/410/H290 mm -Weight: 132 kg/piece

Condition: used, Year of construction: 2014, Transnorm roller conveyor 8250-670-655 RA2093 Ijdpfx Ajn U Dyqjffetr Make: Transnorm Roller width (RB): 655 mm Nominal/outer width (NB): 670 mm Length: 8250 mm Roller diameter: 50 mm Roller distance: 76 mm Drive motor: SEW Gearmotor R17 DT71D4/TH Eletrical Data: 380-500 V, 0,37 kW Conveying speed (v m/s): 0,3 Height frame: 140 mm including Motor: 400 mm Conveyor speed: please contact us Optionally available: Supports Sideguidesfrequency converter for stepples speed controlling Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: good (used), Gear motor, electric motor, electric gear motor, worm gear motor, parallel shaft gear motor -Manufacturer: SEW-Eurodrive, gearmotor with integrated frequency inverter with brake -Square gear unit: F series -Type: FH67BDT71D4/BMG/MM03/RA1A/KPF6 -Speed: 1.2-6.1 rpm Itedpfx Aow Hz Naeffer -Power: 0.075/0.37 kW -Protection class: IP54 -Hollow shaft: Ø 40 x 210 mm -Brake: 5 Nm -Number: 4x motor available -Price: per piece -Dimensions: 425/280/H330 mm -Weight: 44 kg/piece

Condition: used, Year of construction: 1999, Transnorm spiral helix belt curve conveyor left 90°-775-600 IR600 RA2008 The Transnorm belt curve conveyor is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included. These are optionally available on request. Belt curves are frequently used in intralogistics for the internal transport of unit loads and are an indispensable part of modern distribution centers. Transnorm belt curves impress with performance and reliability. Thanks to a low-tension drive, over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the smoothest possible running. Technical data: Type designation: belt curve conveyor TS 1600-105 frame width (NB): 775 mm belt width (GuB): 600 mm overall height (BH): 210 mm inner radius (IR): 600 mm Conveying angle: 90° degrees (coiled 191mm rising) Incline: 191 mm / 90° = 764 mm / 360° Support feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gearmotor SA37/T DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.55 / S1 Isdpok Abtpsfx Affotr Belt: double layer, green, smooth, KT36 (wear see pictures) year of construction: 1999 Optionally available: Supports Side guide one and both sides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, 90° roller curve left + 880 mm straight piece as combination Make: Dematic Rolling curve: 90° link running Width: 440 mm Nominal width (overall width incl. sidewalls): 500 mm Inner radius of the curve: 765 mm Straight piece: Length: 880 mm Width: 440 mm Total width: 500 mm Roles, bright zinc-plated Scale: 70 mm Gearmotor: Make Franz Bangert optional Guide on both sides 3 support Height role OK 800 +/-100 mm Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Itedpsk Aa Izjfx Affer Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Year of construction: 2008, Transnorm roller conveyor 3170-900-850 RA2151 Make: Transnorm Roller width (RB): 850 mm Nominal/outer width (NB): 700 mm Length: 3170 mm Roller diameter: 50 mm Roller distance: 76 mm Drive motor: SEW Gearmotor R17 DT71D4/TH Eletrical Data: 380-500 V, 0,37 kW Conveying speed (v m/s): 0,2 Height frame: 140 mm including Motor: 400 mm Conveyor speed: please contact us Optionally available: Supports Sideguidesfrequency converter for stepples speed controlling Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, expert advice, simply get in touch with us. Itodpfx Aferg Nz Hsfer Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics