Used Screw Motor for sale (28,150)

Condition: new, Year of construction: 2026, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE • Model: FABO HY-600 • Type: Double Helix Screw Washer • Capacity: 60 ton per hour Credpfe Ahybmox Aiioi • Dimension: 1400 x 6650x1800 mm • Screw Size: Ø 600x6000 mm • Speed: 22 rev/min • Motor: 2 x 5.5 kW Heavy duty Gamak • Water Consumption: 55-205 m3 • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Year of construction: 2008, condition: used, York Screw compressor with flanged motor Cooling agent: R134A Crjdpfx Aocrqmrjiiji could be used for R717 Amonia motor data: 165KW/225HP at 3000rpm Y400V/50hz

Condition: used, Machine: screw conveyor, screw conveyor, hollow screw conveyor Length: 8.10 m Ø screw: 500 mm Cedsrn T Urspfx Aiisri Manufacturer: IEM Fördertechnik Type: Solid body screw conveyor, supported on both sides, without motor

Condition: like new (used), Year of construction: 2013, Manufacturer: Kaeser Kompressoren, Germany Cjdpfxsyy U She Aiieri YOM 2013 Maximum Pressure: Up to 13 Bar Productivity 8.26 cubic meters/min Energy Efficiency: The direct drive coupled with IE4 efficiency motors (or IE5 on SFC models) ensures superior energy efficiency. Low Maintenance: Components are designed for long service life, with easy access for maintenance. SIGMA Control 2: Ensures efficient monitoring and control of the compressor. Rotary compressor type Screw by lubrication Oil Noise level 70 dB Height 1900 mm Length 1110 mm Width 1760 mm Weight 1250 kg Electrical parameters Mains voltage 380~400 V Power consumption 45 W Current frequency 50 Hz User characteristics Compressor cooling system Water cooling is possible, with subsequent use of heat. Complete system ready to use fully automatic extremely effective sound insulation vibration insulation powder-coated housing parts for ambient temperatures up to +45°C easy maintenance: lubrication nipples for motor bearings are located on the outside (also for fan motor).

Condition: used, Ball screw with SIEMENS servo motor Linear guide with SIEMENS permanent servo motor Type: 1FK6044-7AH71-1EG0 Type: 1FK7044-7AH71-1EG0 Identification No.: YF RN22 5076 01 001 Year of manufacture: 2003 Axis travel: 540 mm Codpsgi E Hdsfx Aiisri Overall length: 900 mm Shaft diameter: 40 mm Thread pitch: 40 mm Ball diameter: approx. 6 mm - Compact unit with servo motor and ball screw nut - Ball screw with twist-resistant guidance, drive via nut - Ball screw Ø 40 mm (hollow shaft, inner diameter = approx. 22 mm) - SIEMENS permanent servo motor, type: 1FK6044-7AH71-1EG0 (Serial No.: Identification No. YF RN22 5076 01 001) Overall dimensions L x W x H: 900 x 200 x 330 mm Weight: 30 kg Good condition Removed from a functional special machine, tested before removal. 8 units available The stated price refers to 1 unit.

Condition: excellent (used), Year of construction: 2010, Kaeser SM 9 – 11 bar screw compressor Manufacturer: Kaeser Type: SM 9 Machine type: Oil-injected screw compressor Year of manufacture: 2010 Condition: Used screw compressor, ready for operation Max. operating pressure: 11.0 bar Delivery rate: 0.75 m³/min Motor rated power: 5.5 kW Compressed air connection: G 3/4 Crjdpj Agyh Tsfx Aiisi Electrical connection: 400V / 3Ph / 50Hz Dimensions W x D x H: approx. 630mm x 800 mm x 900 mm Sound pressure level: 64 dB(A) Location: In stock at warehouse 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2007, operating hours: 73,989 h, functionality: fully functional, power: 25 kW (33.99 HP), volume flow: 316.2 m³/h, pressure (max.): 8.5 bar, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, type of cooling: air, Equipment: documentation/manual, type plate available, For sale is a used KAESER rotary screw compressor, model ASD 47 SFC, with a 25 kW drive power, frequency control, and a heat exchanger for heat recovery. The integrated heat recovery system allows the heat generated during compressor operation to be used, for example, to heat domestic hot water, heating water, or for other operational heat processes. This enables the efficient reuse of the waste heat generated during operation. Technical data: Manufacturer: KAESER Kompressoren Type: ASD 47 SFC Year of manufacture: 2007 Serial number: 3705 Rated power: 25.0 kW Motor speed: 3,000 rpm Max. operating pressure: 8.5 bar Codpfx Aiez Eqa Toieri Frequency-controlled drive: SFC Control system: KAESER SIGMA CONTROL Heat exchanger for heat recovery Ambient temperature: 3–45 °C CE marking present Operating hours according to display: approx. 73,989 h Load hours according to display: approx. 72,914 h

Condition: like new (used), Kaeser M30 PE screw compressor on a trailer The unit is in perfect condition, like new. The unit was purchased from a warehouse and has never been used. Only 50 hours of operation. Technical specifications: Operating pressure: 7 bar 18.2 kW motor Automatic start Capacity: 3 m3/min Crsdpfx Aiszz Hiloisi Weight: 595 kg Year of manufacture: 2022/12

Condition: used, Year of construction: 1999, Electric motor, year approx. 1999 Crodpfxsxu Ewno Aiisi

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, overall weight: 1,848 kg, Equipment: type plate available, Technical details: Voltage: 400V Phase: 3 Frequency: 50 Hz Volume flow: 13.98 m³/min Speed: 4050 rpm Intake pressure: 1 bar Installed motor power: 75 kW Credpfx Aijwrrgmeisi Compression medium: air Stage pressure: 13 bar g Full load current: 159 A The CompAir screw compressor L75SR-13A is a reliable and powerful solution for compressed air supply in industrial applications. This model impresses with its robust design, high efficiency, and easy operation. It is specifically designed for continuous use and provides stable compressed air performance that meets the requirements of various businesses. Thanks to its compact design, the L75SR-13A can be flexibly integrated into a wide variety of systems and ensures smooth operation with minimal maintenance effort.

Condition: new, Year of construction: 2026, Stainless Steel Screw Conveyor for Bulk Materials Industrial Screw Conveyor with Feeding Hopper for Automatic Material Handling The Screw Conveyor is designed for automatic conveying and feeding of bulk materials into dosing systems, storage hoppers, filling machines and packaging equipment. The machine is suitable for handling polymer materials, flour, spices, dry food mixtures, powders and other bulk materials, including products with limited flowability. The conveyor consists of a stainless steel screw, conveying tube, feeding hopper and electric drive. The rotating screw transports material from the feeding hopper to the discharge outlet, providing continuous material flow to downstream equipment. The conveyor is available in different conveying lengths and can be integrated into existing production and packaging lines. 1. Technical Specifications * Type: Screw Conveyor * Application: Automatic feeding and conveying of bulk materials * Effective Conveying Length: 3000 / 4000 / 5000 / 6000 mm * Motor Power: 2.2 kW * Conveying Tube Diameter: 109 mm * Screw Material: Stainless steel * Hopper Material: Stainless steel * Hopper Capacity: 150 L Cjdpfe Ah H S Njx Aiiori * Conveying Capacity: 500–600 kg/h * Power Supply: 380 V, 3 Phase, 50 Hz * Weight: 180 kg Actual conveying capacity depends on the material properties, bulk density, conveying length and operating conditions. 2. Conveying System The conveyor uses a rotating screw inside a conveying tube to transport bulk materials from the feeding hopper to the discharge outlet. The screw and feeding hopper are manufactured from stainless steel. The 150-liter hopper provides temporary material storage and allows continuous feeding into the conveying system. Available conveying lengths range from 3000 to 6000 mm. 3. Main Features * Screw conveying system for bulk materials * Stainless steel screw and feeding hopper * 150-liter feeding hopper * Conveying tube diameter of 109 mm * Available conveying lengths from 3000 to 6000 mm * Continuous automatic material feeding * Suitable for integration into production and packaging lines 4. Applications The Screw Conveyor is suitable for: * Feeding bulk materials into dosing equipment * Loading storage hoppers * Supplying filling and packaging machines * Conveying polymer materials * Handling flour, spices and dry food mixtures * Transporting powdered and other bulk materials

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: A34902974, Equipment: type plate available, Technical details: Voltage: 400V Codpfxowrq Ice Aiijri Phase: 3 Frequency: 50 Hz Volume flow: 12.44 m3/min Speed: 3000 rpm Intake pressure: 1 bar Installed motor power: 75 kW Compression medium: Air Stage pressure: 10 bar g Full load current: 174.3 A The CompAir screw compressor L75-10A is a powerful and reliable solution for generating compressed air in industrial applications. With its robust design and modern technology, this compressor ensures stable and efficient compressed air supply that meets the high demands of various operations. Thanks to its compact design, the L75-10A can be easily integrated into a wide range of systems and provides long-lasting, reliable performance.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: A34904774, overall weight: 1,765 kg, Equipment: type plate available, Technical details: Voltage: 400 V Phase: 3 Frequency: 50 Hz Air flow rate: 12.44 m3/min Speed: 3000 min-1 Intake pressure: 1 bar Installed motor power: 75 kW Compression medium: air Stage pressure: 10 bar g Full load current: 169 A Codpfx Aswtfk Uoiisri The CompAir L75-10 A screw compressor is an efficient and reliable solution for compressed air supply in industrial applications. Thanks to its modern technology, it operates energy-efficiently and ensures stable compressed air performance. The compressor is equipped with integrated heat recovery, allowing the useful utilization of the waste heat and further reducing energy consumption.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Screw Compressor by Boge Boge screw compressor, model S220. This compact, high-performance unit provides a reliable supply of continuous compressed air for industrial applications. It is excellently suited for production lines, assembly operations, pneumatics and control systems, as well as for larger machine fleets requiring stable air pressure. The design is characterized by durability, ease of maintenance, and efficient power delivery, contributing to reduced operating costs. Technical specifications: Cjdpfx Aiew Rd Avoiori Type: S220 Operating hours: 54,947 h Pressure: 8 bar Free air delivery: 27.9 m3/min Motor speed: 1,500 rpm Power: 160 kW Next maintenance: in 1,000 h.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 349029, overall weight: 2,010 kg, noise level: 69 dB, Equipment: type plate available, Voltage: 400V Phase: 3 Frequency: 50 Hz Crodpfxjwrrn Do Aiiji Flow rate: 14.72 m³/min Speed: 3000 min⁻¹ Intake pressure: 1 bar Installed motor power: 75 kW Compression medium: Air Stage pressure: 7.5 bar g Full load current: 169 A The CompAir screw compressor L80-7.5A is a reliable and efficient solution for compressed air supply in various industrial applications. With its robust design and modern technology, this model ensures stable and continuous compressed air supply that meets the high requirements for performance and reliability. The compressor is characterized by its easy operation, low energy consumption, and minimal maintenance, making it an economical choice.

Condition: used, Year of construction: 2020, functionality: fully functional, overall weight: 2,041 kg, total length: 2,300 mm, total width: 1,380 mm, total height: 1,950 mm, power: 75 kW (101.97 HP), volume flow: 851 m³/h, pressure (min.): 5 bar, pressure (max.): 7 bar, ambient temperature (min.): 5 °C, ambient temperature (max.): 40 °C, noise level: 74 dB, protection type (IP code): IP54, Equipment: documentation/manual, refrigerant dryer, type plate available, For sale is a highly efficient, frequency-controlled screw compressor from the top-of-the-line range of the German manufacturer ALMiG, type V-DRIVE 75 (PLUS O version including heat recovery), first purchased at the end of 2020. This unit impresses with minimal energy costs thanks to its loss-free 1:1 direct drive, stepless speed control and integrated heat recovery (WRG). Technical data: Manufacturer: ALMiG Kompressoren GmbH Type: V-DRIVE 75 PLUS O including WRG Drive power: 75 kW Maximum pressure: 7 bar Volume flow: up to 14.18 m³/min (approx. 851 m³/h) Voltage: 400 V / 50 Hz Control system: ALMiG Aircontrol Premium (including RS 485, operating and fault messages) Dimensions (L x W x H): 2,300 x 1,380 x 1,950 mm Weight: 2,041 kg Equipment & special features: Installation in a special container: - Weather-protected outdoor installation directly on the company premises. - Generous, double-wing access doors for unrestricted maintenance access. - Integrated window with exterior roller shutter. - Standardized container corner fittings (ISO corners) for crane or lifting gear handling are available. - Integrated heat recovery (WRG): For direct use of waste heat for heating purposes or hot water. Crjdpfx Ao Ahppdoiisi - Integrated refrigeration dryer (PLUS) & filter system (O): High compressed air quality directly from the compressor. - SCD frequency inverter & asynchronous motor (IP55): Stepless adaptation to demand, soft start without peak loads. - Sound-insulated: Extremely quiet operation thanks to optimized encapsulation and vibration-isolated installation. - Documentation: Complete documentation / manual available. Important sales & collection conditions: - Delivery condition: Sale is ex works (FCA). - Loading: No loading facilities available on site! - The removal must be organized by the buyer using a truck with a loading crane or a separate mobile crane (lifting equipment suitable for ISO container corners required). - The sale is made excluding any liability for defects and warranty. Subject to prior sale and errors.

Condition: new, Year of construction: 2026, NEW ON THE POLISH MARKET 230 V Screw Air Compressor THE SET INCLUDES: - CORMAK AIR30 SCREW AIR COMPRESSOR. - 150 L HORIZONTAL COMPRESSED AIR RECEIVER TANK (with wheels). CORMAK AIR30 Screw Air Compressor – Compact Power for Your Business Are you looking for an efficient and reliable air compressor suitable for smaller workshops, service centers, or hobby applications, while also requiring a single-phase power supply? The CORMAK AIR30 screw air compressor is the perfect solution. With a motor power of 3.0 kW and an impressive actual air delivery of up to 400 L/min, it provides a continuous supply of compressed air essential for the efficient operation of impact wrenches, air blow guns, and spray painting tools. Powered by 230 V / 50 Hz, this model has been designed for continuous operation, making it an excellent choice for demanding applications such as small workshops, tire service centers, and craft businesses. Investing in a CORMAK screw air compressor is a step towards significantly improving working comfort – say goodbye to noisy piston compressors and enjoy quieter, more stable operation. The CORMAK AIR30 features a reliable and robust direct-drive system that eliminates vibrations and the need for belt drive adjustments. This proven solution ensures stable performance and a long service life by transferring power directly from the motor to the screw compression unit. The maximum operating pressure generated by this screw air compressor is 10 bar. Full control over the machine's operating parameters is provided by an intuitive MAM series electronic control panel, giving you access to essential compressor information and improving flexibility and control over your operations. ✅ Pressure: up to 10 bar | ✅ Air Delivery: up to 400 L/min | ✅ Power: 3.0 kW | ✅ Power Supply: 230 V Technical Specifications Parameter Specification Motor Power 3.0 kW / 4 HP Voltage 230 V / 50 Hz Air Delivery at 0–6 bar Average 400 L/min Air Delivery at 6 bar 390 L/min Air Delivery at 8 bar 380 L/min Air Delivery at 10 bar 380 L/min Air Outlet Connection Diameter (G) 1/2" Crsdpfxj Agu I Tj Aiiei Dimensions 1110 × 650 × 1320 mm Weight 145 kg

Condition: new, Year of construction: 2026, NEW ARRIVAL!!! CORMAK AIR55/200 Screw Air Compressor – Compact Power for Your Business Are you looking for a professional solution to power pneumatic tools in your workshop, paint shop, or small production line? The CORMAK AIR55/200 screw air compressor is the perfect choice. With a motor power of 5.5 kW and an impressive actual air delivery of up to 690 L/min, it provides a continuous supply of compressed air essential for the efficient operation of impact wrenches, air blow guns, and spray painting tools. Powered by 400 V, this model has been designed for continuous operation, making it an excellent choice for demanding applications such as smaller workshops, tire service centers, and craft businesses. Investing in a CORMAK screw air compressor is a step towards significantly improving working comfort – say goodbye to noisy piston compressors and enjoy quieter, more stable operation. The CORMAK AIR55/200 features a reliable and robust direct-drive system that eliminates vibrations and the need for belt drive adjustments. This proven solution ensures stable performance and a long service life by transferring power directly from the motor to the screw compression unit. The maximum operating pressure generated by this screw air compressor is 10 bar. Full control over the machine's operating parameters is provided by an intuitive MAM series electronic control panel, giving you access to essential compressor information and improving flexibility and control over your operations. ✅ Pressure: up to 10 bar | ✅ Air Delivery: up to 690 L/min | ✅ Power: 5.5 kW | ✅ Power Supply: 400 V Key Features That Set These Models Apart Crjdpfx As Agu N Rjiiei 1. Permanent Magnet (PM) Motor Technology - High energy efficiency: These motors achieve efficiency levels corresponding to IE4 or even IE5 standards. - Excellent performance at low speeds: They maintain high efficiency even at very low rotational speeds, unlike conventional motors, which lose efficiency when operating outside their rated speed range. - Compact and lightweight design: PM motors are smaller, lighter, and generate less heat. 2. Advanced Variable Speed Drive (VSD) Control - Demand-based operation: The compressor does not operate according to the traditional "all-or-nothing" principle (load/unload operation). If your equipment requires only 30% of the compressor's capacity, the compressor automatically reduces its motor speed, consuming proportionally less energy. - Elimination of unnecessary idle operation: Conventional compressors often continue running for several minutes after filling the air receiver, consuming approximately 25–30% of their rated power without producing compressed air. 3. Soft Start Technology - Reduced electrical load: Protects the facility's electrical installation by minimizing high starting currents. - More frequent start-stop cycles: Allows the compressor to start and stop more frequently without the risk of overheating the motor windings. Technical Specifications Motor Power 5.5 kW / 7.5 HP Voltage 400 V / 50 Hz Air Delivery at 0–6 bar Average 690 L/min Air Delivery at 6 bar 690 L/min Air Delivery at 8 bar 650 L/min Air Delivery at 10 bar 650 L/min Air Outlet Connection Diameter (G) 1/2" Dimensions with Air Receiver Tank 1430 × 650 × 1320 mm Weight 170 kg

Condition: new, Year of construction: 2026, overall weight: 50 kg, total height: 1,100 mm, total width: 550 mm, total length: 850 mm, Double-Screw Dosing Feeder Industrial Twin-Screw Volumetric Feeder for Controlled Material Dosing The Double-Screw Dosing Feeder is designed for controlled and uniform feeding of polymer raw materials into an extruder. Its primary function is to deliver material in accurately controlled volumes, ensuring consistent and stable feeding during the extrusion process. The feeding system consists of a stainless steel hopper, two feeding screws, and a gear motor. Cedpj Ag Tdvofx Aiiori The rotating screws transport measured volumes of material from the hopper to the extruder inlet, providing continuous and controlled material dosing. The feeder can be integrated into various extrusion systems where precise volumetric material feeding is required. 1. Technical Specifications • Type: Double-Screw Volumetric Feeder • Application: Controlled material dosing into extruders • Feeding Capacity: 150 kg / 200 kg/h • Number of Screws: 2 • Screw Diameter: 45 mm each / 50 mm each • Motor Power: 0.75 kW / 1.1 kW • Ratio 43:1 / 35:1 • Hopper Capacity: 120 L (0.1 m³) • Hopper Material: Stainless steel • Dimensions (L × W × H): 850 × 550 × 1100 mm / 960 × 700 × 1200 mm • Weight: 50 kg / 60 kg Actual feeding capacity depends on the material properties and operating conditions. 2. Dosing System The feeder uses two rotating screws to deliver controlled volumes of polymer material from the hopper to the extruder. The double-screw mechanism provides uniform material feeding and helps maintain a consistent material supply during extrusion. The 150-liter stainless steel hopper provides temporary material storage before dosing. 3. Main Features • Double-screw volumetric dosing system • Uniform and controlled material feeding • Two feeding screws, Ø45 mm each • Stainless steel feeding hopper • Gear motor drive • Continuous material supply to the extruder • Suitable for integration into extrusion lines 4. Applications The Double-Screw Dosing Feeder is suitable for: • Plastic extrusion lines • Controlled feeding of polymer raw materials • Volumetric material dosing • Continuous material supply to extruders • Integration into industrial extrusion systems

Condition: excellent (used), functionality: fully functional, Werner & Pfleiderer Twin-Screw Extruder ZSK 40 – Excellent Condition For sale is a Werner & Pfleiderer (WP) ZSK 40 co-rotating twin-screw extruder. Cjdpsycuuyjfx Aiiori Technical Specifications: • Machine Type: ZSK 40 • Screw Diameter: 40 mm • Screw Length: 7 barrels × 4 D → approx. 28 L/D • Main Drive: 34.5 kW • Motor Speed: 1,800 rpm • Screw Speed: 40 – 400 rpm • Max. Torque per Screw Shaft: 325 Nm • Heating: Electric, connected load approx. 17 kW • Cooling: Water chiller unit • Temperature Control Zones: 6 zones • Barrel Temperature Sensors: 6 • Material Temperature Sensor: 1 • Material Pressure Sensor: 1 Barrel Configuration: • Feed barrel with liquid injection port • Open barrel with insert and 2 liquid injection ports • Multiple closed barrels with ports for liquid injection or measurement points • Degassing barrel General Features: • Co-rotating, closely intermeshing (self-cleaning) screws • High mixing and dispersing performance thanks to modular mixing and kneading elements • Modular system for screws and barrels • Drive section and process section mounted on stable base frame Fields of Application: • Plastics compounding • Masterbatch • Additive and filler incorporation • Laboratory and pilot plant use • Formulation and product development Condition & Runtime: According to the operating hour counter, the machine has run for less than one year and is therefore in excellent, nearly as-new condition. The screw elements are also as new. Options & Customizations: Upon request, we can design and install suitable tooling, such as strand dies, and integrate additional peripherals such as screen changers, pelletizing units, dosing technology, or other customer-specific components. The machine can thus be configured and delivered ready-for-operation according to customer requirements.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, ALUP ALLEGRO 19-10 screw compressor with frequency inverter, serviced. Technical data: capacity: 3.09 m3/min; motor: 18.5 kW; maximum pressure: 9.7 bar; year: 2018; operating hours: 7081 h; compressor is in full working order, warranty included. net price: 15,500 PLN gross price: 19,065 PLN Csdpfx Ao Afddroiisri Link to video below.

Year of construction: 2001, condition: excellent (used), functionality: fully functional, machine/vehicle number: 3063, used Leistritz Micro27/GL-32D laboratory twin-screw extruder, machine no. 3063 Year of manufacture: 2001 Motor power: 10.5 kW Screw speed up to 500 rpm Screw diameter: 27 mm Cylinder material: 1.8550 nitrided Nitriding layer 0.5-0.6 mm Screw material: 1.2379 Volumetric dosing Brabender mounted on the gearbox and included in the scope of delivery. Single temperature control unit included in the scope of delivery. Atmospheric degassing, without blind plug Documentation in German available in paper form. Credpfjyc Sfpox Aiiji tool with nozzle 1 hole approx. 3 mm Condition: used, functionally tested, as is, without warranty You are welcome to view this (and other) extruders at our warehouse in Königswinter The machine can be switched on and demonstrated when empty. The screw has been removed and cleaned.

Condition: good (used), Screw compressor, compressor, compressed air unit, stationary compressed air compressor Credewu Axlopfx Aiioi -Manufacturer: Demag / CompAir, screw compressor type 350WS / EK285NK without drive motor -Volume flow rate: 35.1 m³/min -Max. pressure: 7 bar -Drive shaft: Ø 90 x 120 mm -Individual components: see photos -Dimensions: 1100/670/H1000 mm -Weight: 1032 kg

Condition: used, Year of construction: 2011, Compressor design: Screw compressor Pressure: 9/10 bar Volumetric flow rate: 460 l/min Csdpfs Agpdkox Aiijri Weight, approx.: 170 kg Motor power: 4 kW Storage location: Rieth

Condition: defective spare-parts repository (used), Year of construction: 2004, machine/vehicle number: A II 151768, Offer 25979 Defective screw compressor - compact unit - Operating hours: 16550 h - Operating pressure: 10 bar - Delivery rate: 15.9 l/s - Drive: 400 V / 7.5 kW - Motor speed: 3000 rpm - Air tank: 250 L Cjdpowrcq Nsfx Aiisri - Space requirement: approx. W 700 x H 1830 x D 1050 mm - Weight: approx. 250 kg