Used Saw Motor for sale (29,340)

Condition: new, Year of construction: 2025, crosscut and miter saw type: ZS 200 N - 5 KW motor with machine stand, but without saw blade Machine via handwheel and worm gear (rear) Cedpji Dfidefx Abusrh Tiltable Saw blade diameter 520 mm, saw blade mounting hole 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake u. Automat. Star delta motor control cutting width at 90deg: 420 mm cutting width at 45deg: swivelled: 295 mm Cutting height at 90deg: 200 mm Cutting height at 45deg tilted: 140 mm Saw can be tilted on one side up to approx. 25 degrees to acute angles and tilted flat to the left up to 30 degrees Machine stitched: approx. 250 kg Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Circular saw flat motor KATT 11 kW / 1450 rpm, flange Ø 200 mm, right-hand thread, second stub shaft for hydraulic pump drive with pulley 150 mm Ø, tested and with new bearings. Crsdpfx Absh D Rt Aeueh

Condition: ready for operation (used), Flat engine Circular saw motor Chipper motor EKE-Erding 7.7 kW / 2900 rpm / 50 Hz 790 EUR/PC MIMMEL 3.7 kW / 2900 rpm / 50 Hz 450 EUR/PC Cedpfepq Ihxjx Abuorh

Condition: used, Veneer saw, veneer saw machine, jointing machine, fine cutting machine, fine cutting circular saw, Veneer saw drive motor Crjdjh Elztjpfx Abuoh -Veneer saw: SF Scheer drive motor EM 21 -Drive: 1.6 kW 2820 rpm -Dimensions: 265/270/H255 mm -Weight: 24 kg

Condition: used, 900 band saw with 5 hp motor, used. Codpfx Abswtl S Seujrh

Year of construction: 1987, condition: used, Floor saw -Motor: Honda petrol engine -Power: 8.1 kW/11 PS -Saw blade diameter: 400 mm Csdpfx Abeb A Hv Heujrh -Number: 3 pieces available -Price: per piece

Condition: reconditioned (used), 1 pair of flat motors well suited for pre-cutting circular saws in front of log band saw systems, one right-hand thread and one left-hand thread, for continuous power 5.5 kW, with new ball bearings, with steel brackets for mounting Crodpsuqk Azefx Abuoh

Condition: used, Miter cross-cut saw for aluminum (special machine construction with 4 servo motors) Circular saw, miter saw, rip saw year of construction 2002 Saw blade diameter 500 mm Sawing range at 90° round Ø 180 Rectangle 350 x 140 mm (through longitudinal cut) Sawing range at 45° round Ø 180 Rectangle 350 x 100 mm (through longitudinal cut) Guide length of base support 1100 mm Travel on the base support (forwards and backwards) 650 mm Travel on the stand (up-down) 120 mm Saw blade speed approx. 3000 rpm Motor power 2.2 kW Mains connection 400 Volt, 50 Hz - Controlled longitudinal cutting movement Crodpodzp T Djfx Abueh - Controlled saw blade height adjustment - Controlled mitre cut through swivelling saw unit - Controlled miter cut by tilting saw unit - Pivoting and tilting of the saw via INDRAMAT servomotors with precision gears (MKDO71B-061-KG1-KN and MKDO41B-144-KP1-KN motor) - Vertical axis movement via INDRAMAT servomotors and ball screws (MKDO41B-144-KP1-KN motor) - a total of 4 Indramat servomotors are installed - very good German mechanical engineering Space requirement L x W x H 1150 x 1100 x 1400 mm weight approx. 360 kg good condition The unit comes from a special machine for special products. All other components and electrical parts for the construction of a new special machine are also available.

Condition: good (used), functionality: fully functional, Technical details: SEW motor Type: DV132H8/4BH/HF/TH rpm: 700/1450 IP:54 Hz: 50 400V AC Brake: 400V kg: 83.94 The SEW motor with rotary table is a powerful and versatile drive solution, ideally suited for precise positioning and automation tasks. The motor stands out due to its robust construction and reliable operation, ensuring stable and efficient performance. The integrated rotary table allows flexible and accurate control of movement sequences, making it particularly suitable for use in manufacturing and assembly applications. Csdpfx Abewu Dbbeuorh

Condition: good (used), functionality: fully functional, Siemens motor servo drive Manufacturer: Siemens Type: 1FT6064-6AF71-3AB0 SN31157401001 For further technical data, please refer to the type plate in the attached photos. Otherwise, please note the following information and call us if necessary. Thank you very much. - Condition: please see photos, the item was stocked as a spare part, comes from the spare parts warehouse or was dismantled from an existing system. - Further information: Please note that the item may have already been used. Some scratches, stains, discolorations or cable harnesses are therefore still present. - The item is offered as used, even if they are still in the original packaging. - Some of our items have been dismantled from functioning production systems or are unused stock items, - Items have been in storage for several years and are expressly offered as "used goods", even if they have hardly been used or have only been kept in stock as spare parts. - Deviations from technical data and errors in the description of the item may occur and are reserved. - Condition/packaging as shown in the photos or according to individual agreement. - For further questions or request for more photos please contact us. - For shipping abroad, please inquire, as shipping costs vary. Cedpsvcmzbsfx Abujrh - For technical or other queries please contact us at any time. - Appointments for viewing or collection are of course possible by arrangement. For questions and appointments for viewing is possible. Please contact us at any time. Thank you for your interest.

Condition: repair required (used), Year of construction: 2002, operating hours: 14,000 h, functionality: limited functionality, Wintersteiger dsg 200S 250mm height lamella sawn In-feed roller not working Crjdpfxjxlr Hqo Abujh

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 71500846002, power: 132 kW (179.47 HP), Technical data as per nameplate: Manufacturer: EMK / Sondermeier Elektromotoren Handels GmbH Type: KHL1G315M-4B3E3KR Motor number: 71500846002 Power: 132 kW Voltage: 400 V (delta connection Δ) Current: 241 A Frequency: 50 Hz Speed: 1435 rpm Mounting: B3 (foot mounting) Protection class: IP55 Insulation class: F cos φ: 0.89 Date of manufacture: 08/2022 Place of manufacture: Rain / Germany New price: approx. €6,200 Our price: only €2,800 Crjdpfx Abjxgtpijush

Condition: good (used), Contactor, semiconductor contactor, contactor -Max. 30 kW 660 V -Price: per piece -Quantity: 17 pieces available -Weight: 2 kg Crodpjb A N Akofx Abujh

Condition: used, Vesto saw with two discs for sale - electric motor: 2 x 7.5 kW, Codpfxjtqt T Ie Abusrh - complete with hydrostation, - electrical cabinet.

Condition: used, Electric motors Crodpfxsxfvzro Abueh

Condition: used, Year of construction: 2002, machine/vehicle number: 021203, Machine Name - Mega saw Machine Model - H1830 s.n 021203 Specification - Year 2002 3.7kw Main motor Semi- automatic 82- 250 FPM Variable speed control Max bar cutting size 460mm Crsdpfx Ajwxmhlebujh In-built coolant tank with pump and screw auger. Manual vice

Condition: used, Tilting heads. All with safety lock out switches. 30mm blades. Very strong machine. Comes complete with own saw doctoring equipment. New set of blades. Many spares. This machine is far superior than most other narrow band saw horizontals. Machine has been fitted with all new power feed rollers. Last production was Oak F/E boarding FOM. Crodpfx Asvlfk Tjbush

Condition: used, Year of construction: 2004, functionality: fully functional, cutting width (max.): 400 mm, cutting length (max.): 6,000 mm, total width: 5,400 mm, total length: 13,500 mm, total height: 2,500 mm, saw blade diameter: 800 mm, type of input current: three-phase, rotational speed (max.): 800 rpm, DePauw QCUWSCNC18 Double Cut Cross Saw, manufactured in 2004. Fully functional and well maintained, suitable for immediate use in production. Cutting width: 400 mm Cutting length: 6,000 mm Total machine dimensions: 13,500 mm (length) × 5,400 mm (width) × 2,500 mm (height) Rear saw blades: 800 mm diameter, maximum speed 1,500 rpm Front saw blades: 500 mm diameter, maximum speed 3,000 rpm Cjdpfsw Nbhmjx Abujrh Saw type: Double Cut Cross Saws Condition: Used, fully operational. Location: Cork, Ireland Delivery available at buyer’s expense. Price: €25,000 Contact for more details or to arrange a viewing.

Condition: new, Approximately 30000 KG Stirling engine parts Cedpfx Abet Tcnujuorh

Condition: used, Three head band saw IDC000093 - manufacturer: Talsu - each electric motor: 11 kW - for square log cutting - with electric cabinet - hydraulic station Codpfx Aoupt Siobujrh - three head - for sawing pallet boards - feed chain - feed pushers from the top

Condition: good (used), Servo motor, used machine Csdpfxot A Ux Dj Abuerh Manufacturer : Baumüller Type : Gnaff 200 LV Electrical data : 400V, 112 KW, 316A, 2600 rpm Dimensions : 1120 x 560 x 400 mm Shaft length/diameter : 140mm/60mm Nmax: 9000/min Overhauled engine

Condition: new, power capacity / kW volt / V ampere / A Crsdpfsig A Ekox Abueh total power requirement 12,6 kW MOLL engine Type: Y2PE-160MA2B3 / ML1907010375 V: 400/690 A: 19.6 / 11.3 / 19.5 Speed: 2950 / 3540 Total power: 11kW / 12.6kW Condition: New

Condition: ready for operation (used), Oriental Motor 4GS25K reduction gear head serial number: VP801 806, used, good condition, 100% functional, scope of delivery as per photos Crsdpfxjvtiqae Abuoh

Condition: new, power capacity / kW volt / V ampere / A total power requirement 42,5 kW Codpfeif Sc Dox Abusrh MOLL-Motor Typ: Y2PE-200LB2B3 / ML2001011999 V: 400/690 A: 64,0 / 37,1 / 64,4 Rpm: 2970 / 3564

Condition: new, power capacity / kW volt / V ampere / A total power requirement 21,3 kW MOLL engine Type: Y2HE-180M4 PTC / MOLL130920373 V: 400/690 RPM: 1470 / 1764 Total power: 18.5kW / 21.3kW Cedpfx Asuddlhjbusrh Condition: New