Used Workshop Lathe for sale (10,099)

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, turning diameter over bed: 540 mm turning length: 1.500 mm turning diameter in the recess: 580 mm Working travel of the lower slide max. approx.: 415 mm adjustment of upper support, max. approx.: 140 mm turning speed range: 0 - 1.800 1/min diam. of main spinde: 135 mm spindle bore: 68 mm internal taper diameter: 68 mm Cjdo Ad Izfspfx Aiiori bed width: 403 mm Equipped with: Three jaw chucks FORKARDT 250 Digital read out 3 axis fixed steady rest feed safety chip tray tool holders, 6 chisel holders, 1 holder for clamping sleeve

Condition: good (used), Year of construction: 2006, Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 mm Swing diameter over face slide: 260 mm Face slide travel: 380 mm Main drive Drive power AC motor - 40/60/100% duty cycle: 33/27/22 kW Spindle box Spindle bore diameter: 106 mm Spindle diameter in front bearing: 140 mm Speed range (V constant): 1 - 2,000 rpm Cross slide Feed range, face: 0.001 - 1,000 mm/rev Feed range, face, optional up to: 5,000 mm/rev Feed range, longitudinal and thread pitch: 0.001 - 2,000 mm/rev Feed range longitudinal and thread pitch, optional up to: 13,000 mm/rev Feed force flat: 9,000 N Feed force longitudinal: 12,000 N Automatic tool turret Number of tool stations: 12 With tool drive for 6 stations Tool holder system (DIN69880) VDI40 Equipment SIMENS SINUMERIK 840D sl (Shop Turn with manual functions) Crsde Ad Izlopfx Aiisi COMBI control station C-axis with drilling, milling, and engraving cycles Residual material detection and machining – during roughing and contour pockets MULTIFIX C forne setup Three-jaw chuck SMW AUTOBLOK: HI-GRIP HGF260-81-3 Oil emulsion mist filter for work area extraction: MAHLE LTA600

Condition: like new (used), Year of construction: 2009, operating hours: 26,000 h, travel distance X-axis: 725 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 300 mm, spindle motor power: 11 W, spindle speed (min.): 5,000 rpm, total length: 3,171 mm, total height: 2,648 mm, total width: 4,254 mm, overall weight: 6,000 kg, CNC controller: SIEMENS SINUMERIK 840D-ERGOLINE Capacity X-axis travel mm: 725 Y-axis travel mm: ± 50 Z-axis travel mm: 300 Turning length mm: 160 Max. turning diameter mm: ø: 250 Swing over bed mm: ø: 320 Tool magazine Magazine places: 16 Tool holder: VDI-30 Tool length max. mm: 390 Tool diameter max. mm: 140 Lower turret Number of tool slots St .: 12 Speed driven tools RPM: 4.000 Drive power driven tools kW: 11,7 Milling function: Yes Main spindle Speed spindle rpm: 5.000 Drive power spindle kW: 11,7 (40% ED) Maximun torque Nm: 280 / 360 (100% / 40% ED) Coolant system Tank capacity liter: 980 L High-pressure bar: 8 / 20 Equipment Chip conveyor CE conformity Coolant gun Air blast / coolant switch-over Internal coolant supply Paper band filter Crsdpfxexf Hlbo Aiiji Automatic workpiece magazine loader - 16 positions x ø 220 Working time hours Under power: 38.000 Cutting Time: 26.000 Basic machine dimensions / weight Length mm: 3.171 Width mm: 4.254 Height mm: 2.648 Weight kg: 6.000

Condition: good (used), Year of construction: 2001, Machine is in good condition. Parts shown by hand not come. Cutting tools not come. Crsdpfxsrpk Rmo Aiioi

Condition: like new (used), Year of construction: 2010, operating hours: 14,010 h, turning length: 800 mm, turning diameter: 430 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 455 mm, travel distance Z-axis: 800 mm, rotational speed (max.): 6,000 rpm, feed length X-axis: 455 mm, feed length Z-axis: 430 mm, workpiece weight (max.): 5 kg, total height: 8,500 mm, total length: 2,500 mm, total width: 2,495 mm, overall weight: 8,500 kg, CNC controller: Fanuc FS31IA5 (MAPPS 4) Capacity Turning length mm: 800 Max. turning diameter mm: ø: Ø430 Turn-mill spindle X-axis travel mm: 455 Z-axis travel mm: 800 B-axis degree: ±120 (0.001º) Speed spindle rpm: 12000 Drive power kW: 9/5.5 Y-axis travel mm: ±105 Tool magazine Magazine places: 76 Tool holder: Capto C5 Tool length max. mm: 250 Tool diameter max. mm: 70/130 Tool weight max kg: 5 Lower turret X-axis travel mm: 160 Z-axis travel mm: 730 Number of tool slots St .: 10 Main spindle Speed spindle rpm: 6000 Spindle bore mm: 73 Credpfx Aoy Rpq Tsiisi Chuck type: Hollow Chuck (8") Manufacturer: KITAGAWA Counter spindle Speed spindle rpm: 6.000 Drive power spindle kW: 7.5/5.5 Chuck type: Solid Chuck (8") Manufacturer: KITAGAWA Equipment Chip conveyor Signal lamp High pressure pump Chuck foot switch (double) for main and counter spindle Coolant gun Working time hours Under power: 76482 Spindle 1: 14010 Spindle 2: 4306 Potencial nominal kVA: 48 Basic machine dimensions / weight Length mm: 2500 Width mm: 2495 Height mm: 8500 Weight kg: 8500

Condition: good (used), functionality: fully functional, Gildemeister NEF 320 CNC lathe Credpfxj Aggiio Aiiei Technical data: Manufacturer: Gildemeister Type: NEF 320 Machine: CNC lathe Max. turning diameter over bed: 320 mm Max. turning diameter over carriage: 150 mm Max. turning length: 500 mm Max. distance between centers: 750 mm Spindle speed: 10–4,000 rpm Spindle bore: 50.8 mm Motor power: 9 kW Control system: Heidenhain MANUAL plus

Condition: used, Facing lathe POREBA TZB 250A Manufacturer: POREBA Cedpfx Ais Agn Uijisri Max. turning diameter: Ø 3,200 mm Turning diameter over the bed: Ø 2,500 mm Faceplate diameter: Ø 2,000 mm Max. workpiece weight: 4,000 kg Spindle speed range: 0.5 – 100 rpm Main motor power: 55 kW Machine weight: 29,000 kg

Condition: excellent (used), Year of construction: 2012, 2x INDEX V300 vertical CNC lathe Power: 87 kW Year: 2012 1 tool turret with 10 positions CNC: SIEMENS SINUMERIK 840D sl with parts conveyor Cjdpfxe Aggb Uj Aiiori Approximately 19 tool holders, including powered tool holders and 10-tool displays Chip conveyor Tilting and forklift-compatible chip bin, GOUBARD

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 16212-51, turning length: 1,300 mm, turning diameter: 400 mm, spindle motor power: 68 W, total height: 2,900 mm, total length: 6,391 mm, total width: 2,495 mm, overall weight: 12,000 kg, Equipment: documentation/manual, For sale is a CNC lathe, GF Georg Fischer lathe FMS NDL-40/130, with Siemens 840D control, including 2 additional chucks. Crsdpe Agrhdsfx Aiisi Max. workpiece diameter: 400 mm Max. workpiece length: 1300 mm Selling price ex works Condition: Good condition, the machine is powered and can be tested. Upon request, I can also send a current video demonstrating the most important functions. Important terms of sale (B2B only): The sale is exclusively to commercial enterprises. By submitting a bid or making a purchase, you confirm that you are acting as an entrepreneur within the meaning of § 14 BGB. Exclusion of liability: The sale is made with the exclusion of any liability for defects in materials and workmanship. Warranty: No warranty or guarantee is provided. Returns: No returns or exchanges are permitted. Liability for damages resulting from injury to health, body, or life, as well as from gross negligence and/or intentional breaches of my obligations as a seller, remains unlimited. Permitted delivery area (EU internal market only) The sale and transfer of ownership of this machine are exclusively to commercial buyers with a registered office and delivery address within the European Union (EU). A sale to third countries (e.g., Switzerland, the United Kingdom, the USA) is excluded. A valid VAT identification number (VAT ID) must be provided for invoicing.

Condition: used, Year of construction: 1992, Max. turning diameter over the bed: Ø 1,600 mm Csdpfxo Agpd Ss Aiisri Max. turning diameter over the carriage: Ø 1,290 mm Max. workpiece weight between centers: 30,000 kg Max. workpiece weight with a single steady rest: 35,000 kg Max. workpiece weight with double steady rests: 40,000 kg

Condition: good (used), Year of construction: 1997, operating hours: 33,000 h, functionality: fully functional, machine/vehicle number: 323, turning diameter over cross slide: 200 mm, turning length: 950 mm, turning diameter: 410 mm, spindle bore: 54 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 1 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 950 mm, spindle motor power: 7,500 W, rotational speed (min.): 1 rpm, rotational speed (max.): 3,000 rpm, total height: 1,700 mm, total length: 2,300 mm, total width: 1,400 mm, quill travel distance: 120 mm, quill diameter: 65 mm, quill stroke: 120 mm, swing diameter over cross slide: 200 mm, feed rate Z-axis: 10 m/min, turning diameter over bed slide: 410 mm, turning diameter over top slide: 200 mm, type of input current: three-phase, torque: 700 Nm, overall weight: 2,100 kg, swing diameter over bed slide: 410 mm, bar passage: 54 mm, swing diameter over top slide: 200 mm, spindle nose: DIN 55027 Size 6 type, center height: 200 mm, bar diameter (max.): 54 mm, travel distance cross slide: 230 mm, Equipment: rotational speed infinitely variable, 1997 Weiler E35 Cycle-Controlled CNC Lathe Used 1997 Weiler E35 CNC / Cycle-Controlled Lathe for Sale – Weiler D1 Control – 410mm Swing – 54mm Spindle Bore – 3,000rpm – 10 Tool Holders Manufacturer: Weiler Model: E 35 Machine Type: CnC Lathe Year: 1997 Condition: Working Well Machine Description The Weiler E35 is a high-quality German-built precision lathe combining the flexibility of a conventional centre lathe with the productivity of CNC/cycle-controlled machining. This machine is equipped with the Weiler digital conversational cycle control, allowing straightforward manual machining as well as programmed turning cycles for repeat work, tapers, radii and other common turning operations. With approximately 410mm swing over the bed, 54mm spindle bore and spindle speeds up to 3,000rpm, the E35 is particularly well suited to precision engineering, toolroom work, maintenance departments, repair work and small-to-medium batch production. The machine has approximately 33,000 power-on hours and is supplied with 10 quick-change toolpost holders. Main Specifications Manufacturer: Weiler Werkzeugmaschinen Model: E35 Year: 1997 Serial Number: 323 Machine Type: Cycle-Controlled / CNC Centre Lathe Control: Weiler Digital Cycle Control / D1-type control Power-On Hours: Approx. 33,000 hours Turning Capacity Swing Over Bed: 410mm Swing Over Cross Slide: 200mm Centre Height: 200mm Spindle Bore: 54mm Maximum Chuck Diameter: 250mm Faceplate Diameter: 355mm Distance Between Centres: 950mm Spindle Spindle Speed Range: 1–3,000rpm Spindle Power: 7.5kW Maximum Spindle Torque: 700Nm Spindle Bore: 54mm Spindle Internal Taper: MT6 Spindle Nose: DIN 55027 Size 6 type The combination of a 54mm spindle bore and substantial torque makes the E35 suitable for both precision finishing and heavier general turning work. Weiler Cycle Control The machine is fitted with the Weiler conversational cycle control, designed to make CNC turning accessible without requiring full conventional G-code programming for every job. The control provides functions for operations such as: Straight turning Facing Taper turning Radius turning Threading Positioning Feed control Spindle speed control Repetitive machining cycles Manual machine operation Conversational cycle programming This type of control makes the E35 particularly attractive to toolrooms and general engineering workshops where both one-off components and repeat batches are produced. Feed & Axis Performance Longitudinal Feed Range: 0.001–20mm/rev Cross Feed Range: 0.001–20mm/rev Longitudinal Rapid Traverse: 10m/min Cross Rapid Traverse: 5m/min Cross Travel: 230mm Tailstock Tailstock Taper: MT4 Tailstock Quill Diameter: 65mm Tailstock Quill Stroke: 120mm The tailstock allows the machine to support longer workpieces and carry out drilling, reaming and centre-working operations. Tooling Included The machine is supplied with: 10 quick-change toolpost holders Electrical Specification Operating Voltage: 400V Frequency: 50Hz Connected Load: 10kW Nominal Current: 18A Control Voltage: 24 / 230V Approximate Machine Dimensions Overall Length: 2,300mm Overall Width: 1,400mm Overall Height: 1,700mm Credpfxo Agu A Se Aiioi Machine Weight: 2,100kg Please Note: All specifications, dimensions, capacities, speeds and machine details quoted above are approximate and are provided for guidance only.

Condition: used, Year of construction: 2008, 2-axis CNC lathe Victor V Turn 26, year 2008 Crodpfxe Acn A Te Aiiei Fanuc i Series control 250mm chuck Z-axis travel: 600mm Very good condition Tailstock Tool probe Chip conveyor

Year of construction: 1997, condition: used, X-axis travel: 220mm, Z-axis travel: 635mm, swing diameter over bedway cover: 570mm, swing diameter over cross-slide cover: 420mm, main spindle nose diameter: 170mm h5, main spindle diameter at front bearing: 120mm, main spindle bore: 79mm, drive power at 100% duty cycle: 21kW, max. torque: 240Nm, spindle speed range: 25-5,000rpm, C-axis speed: 100rpm, holding torque: 200Nm, counter spindle nose diameter: 120mm h5, counter spindle diameter at front bearing: 90mm, spindle bore: 56mm, chuck diameter: 140mm, drive power at 100% duty cycle: 9kW, max. torque: 72Nm, spindle speed range: 25-5,000rpm, travel: 575mm, rapid traverse speed: 24m/min, Z-axis feed force: 7kN, X-axis feed force: 3.5kN, X-axis rapid traverse speed: 20m/min, Z-axis rapid traverse speed: 24m/min, X/Z ball screw dimensions: 32x10mm, length: 3565mm, width: 1700mm, height: 1700mm, weight: 4.7t, operating hours: 79,630h, the machine is currently not operational due to damage to the tool turret, an on-site inspection is possible. Csde Agwqtopfx Aiiori

Condition: used, Hurco TM10i, 2 Axis CNC Lathe, Year 2007, 250mm Diam 3 Jaw Chuck, Tailstock, Hydrafeed MV65 Bar Feed, Collet Chuck Unused In Box, Hurco TM10i CNC turning centre with slant bed design. Precision CNC lathe suitable for subcontract machining, production engineering and general manufacturing applications. The Hurco TM10i CNC Turning Centre is a versatile slant bed CNC lathe designed for precision machining and efficient production of turned components. Suitable for subcontract engineering, general manufacturing and production environments, the machine offers the flexibility required for a wide range of turning applications. Manufactured by Hurco, a recognised supplier of CNC machine tools, the TM10i combines robust construction with reliable machining performance. The slant bed design promotes excellent rigidity and chip evacuation, helping to maintain accuracy and consistent part quality during production. Ideal for machining a variety of components and materials, the TM10i provides an excellent opportunity to acquire a quality CNC turning centre from a respected manufacturer. Its compact footprint and practical design make it suitable for both established machine shops and expanding engineering businesses. Cjdj Aggp Topfx Aiieri Available for inspection at our Prestwick, Ayrshire facility. Specifications: Swing: 22.9" Machining Length: 29.9" Chuck Size: 10" Bar Capacity: 3.19" Power: 29.5 hp Max RPM: 3,000 RPM Turning Dia: 17.7"

Condition: used, Year of construction: 2003, centre height 255 mm centre distance 1.080 mm turning diameter over bed 500 mm turning diameter over slide 290 mm turning length 1.000 mm control EuroTurn spindle bore 70 mm spindle taper KK 8 DIN 55027 3-jaw-chuck diameter 250 mm bed width 360 mm turning speed range 2 - 2.800 U/min rapid travel - longitudinal/face 10 / 5 m/min quick change toolholder PARAT Gr. 2 drive capacity - spindle motor 11,0 kW taper in tailstock-quill MK 5 dia. of quill 80 mm quill stroke 160 mm voltage 400 V total power requirement 16,0 kVA weight of the machine ca. 3,0 t dimensions of the machine ca. 2,85 x 1,60 x 1,80 m - Serial-No.: 495 / 03 Crodpfxowizltj Aiisi - control: EuroTurn - quick change tool holder PARAT - coolant equipment - machine lamp

Condition: used, Year of construction: 2001, turning length: 750 mm, turning diameter: 340 mm, turning diameter over bed slide: 665 mm, CNC Lathe Manufacturer: TRAUB Model: TNA 400 Year of manufacture: 2001 Control system: SYSTEM TX 8H Technical specifications: - Turning diameter: 340 mm - Turning length: 750 mm - Spindle bore: 80 mm - Swing over cross slide: 530 mm - Swing over bed: 665 mm Csdpfx Aiexwdw Esieri - Speed range – main spindle: 3,150 rpm - Drive power – main spindle: 22 kW - Number of tool stations: 12 positions 2 machines are available. Price per unit. Machine 1: - Images 1-5 - Operating hours approx. 55,790 h Machine 2: - Images 6-10 - Operating hours approx. 54,347 h Equipment & accessories: - Y-axis - Accessory package including static and driven tool holders In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: used, Year of construction: 1998, This model of machine is fitted with 2 independent sensitive hydraulic copy units that can work from either a template or sample. The first cutter would be set for roughing out, the second one for the finishing cut that will enable a component to be produced in one pass. There is still the possibility to programme a second automatic pass of the finishing gouge for heavy work. The machine is also equipped with hydraulic tailstock unit and hydraulic operated back knives. Year - 1998 CE The unique feature of the T5E is saddle movement by precision recirculating ball screw with programmeable electronic control to the feed speed to ensure optimum turning flexibility and quality. This precision feature allows the operator to perfectly control the saddle advance in relation to the complexity of the turning and the optimized saddle speed can then be stored within the memory of the machine. 2000mm turning capacity between centres NC electronic control to saddle movement with infinitely variable feed 0 to 12m/min Two speed 4/5.5hp motor giving six spindle speeds 900-1500-1800-2250-3000-4500rpm Csdpszd Uv Eofx Aiieri Two Hydraulic Copy Units each mounted with horizontal vee type gouges hss 2 Vertical back slides with knives for making dowel ends Max 95mm x 95mm square section with revolving Steady Max 175mm x 175mm square section without Steady Sliding guard for operator protection CE safety equipment

Condition: good (used), Year of construction: 2009, functionality: fully functional, CNC Lathe TRAUB TNX 65/42 Year of manufacture: 2009 Control: Traub TX 8i-s TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turrets: 2 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. diameter of main spindle chuck: 175 mm - Minimum C-axis resolution: 0.001 degrees SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001 degrees - Travel: 700 mm LEFT UPPER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z-axis travel: 175 / 650 mm - Y-axis travel: +/- 40 mm - Tool type: VDI 30 - Driven tools speed: 6,000 rpm - Driven tools power: 5.5 kW RIGHT LOWER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z-axis travel: 175 / 650 mm Csdpfx Ais Afg Tcoieri - Y-axis travel: +/- 40 mm - Tool type: VDI 30 - Driven tools speed: 6,000 rpm - Driven tools power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 95 kW WEIGHT AND DIMENSIONS - Footprint: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg New spindle since 04/26 ACCESSORIES - 3-color status signal lamp - Coolant tank: RESY * with high-pressure pump * with paper filter - Chip conveyor - Parts extraction - Parts belt conveyor

Condition: used, Year of construction: 2007, STAR SR20II RII, year 2007, with a bar feeder. Codpe Acmyqofx Aiiori

Condition: used, Year of construction: 2014, CNC Lathe Manufacturer: GOODWAY Model: GS 280 Year of manufacture: 2014 Control system: FANUC Series Oi-TD Technical details: Control system: FANUC Series Oi-TD Swing over bed: 670 mm Swing over carriage: 500 mm Max. turning diameter: 400 mm Max. turning length: 600 mm Spindle nose: A2-8 Spindle bore: 90 mm Front bearing diameter: 130 mm Spindle speed: 35 – 3,500 rpm Number of tool stations: 12 positions Crsdpfx Aezvzaujiiei Additional information: In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools shown, and workholding devices are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 4397, Ladies and Gentlemen, We are selling a Weiler Praktikant 160 AC lathe built in 1998 with original Weiler 3-axis digital readout. This newer version "AC" stands out above all due to the infinitely variable speed control, which makes working on the otherwise very user-friendly machine even easier. The machine has been extensively overhauled in our workshop so that it is technically and visually in excellent condition. All guides are in good order, the gears run quietly and the levers are easy to operate. You are welcome to visit us on site to see the condition for yourself. Availability: on request Machine no. 4397 Cedjq H D U Ejpfx Aiieri Year of manufacture: 1998 Center height: 160mm Center width: 650mm Spindle passage: Ø 40mm Spindle speed: 20-3000 rpm stepless Tailstock taper holder: MK3 Quill stroke: 85mm Feed range longitudinal slide: 0.020 - 0.630 mm/rev Feed range cross slide: 0.006 - 0.200 mm/rev Possible thread types: Metric, inch, module, diametral pitch Metric thread pitches: 0.25 - 8mm Spindle brake: switchable Total connected load: 7.5 kvA Voltage: 400V Dimensions: approx. 1.58x0.9x1.5m (LxHxW) Weight: approx. 720kg Further equipment and accessories: 3-axis digital display, coolant device, chuck protection, jaw chuck and other accessories on request... Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul your chosen machine - On request, we can repaint the selected machine in the color of your choice - On request, you can order additional accessories such as tools etc. directly with the machine - On request, we can install additional accessories such as safety devices etc. - We are happy to take care of shipping and/or installation

Condition: used, Year of construction: 2016, Technical details: turning diameter: 26 mm Article: High-precision CNC lathe with linear cross slide Manufacturer: Benzinger Type: GOFuture B1 Yob: 2016 Machine was only used for reworking, i.e. only light machining work was carried out! Control: Siemens Sinumerik 840Dsl Main spindle: maintenance-free motor spindle Bar capacity: D26mm Loading and unloading device type IB Additional gripper system for placing the workpieces in the correct position on the unloading belt Coaxial valve for coolant to the linear tools (3 pieces) Internal clamping device C-axis main spindle for digital control incl. transmit function Adjusting microscope 16x magnification Coolant supply through the spindle clamping cylinder, Sealing air, Speed increase of the motor spindle to 8. 0000 rpm Nordmann tool monitoring Profibus master interface Hinged belt conveyor Knoll Compact coolant device Knoll MBE interface Small fire extinguishing system Kraft & Bauer Network interface for teleservice A total of 2 similar machines are available - package sale possible Please, contact us for getting more information and pictures on mail(at) or subject to sale and mistakes Crodpfxowbgcnj Aiiei *

Condition: used, Year of construction: 2015, turning length: 1,000 mm, turning diameter: 210 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 250 mm, travel distance Z-axis: 1,050 mm, spindle motor power: 15,000 W, torque: 476 Nm, bar passage: 65 mm, CNC Lathe Manufacturer: DOOSAN Model: TL 2000 L Year of manufacture: 2015 Control system: Fanuc 31i Technical specifications: - Turning diameter: 210 mm - Turning length: 1000 mm Main spindle: - Max. speed: 5,000 rpm - Drive power - main spindle: 15 kW - Max. torque: 476 Nm - Bar capacity: 65 mm Travel ranges: - X-axis: 250 mm - Z-axis: 1050 mm - X2-axis: 150 mm - Z2-axis: 1030 mm - Spindle hours: approx. 700 h Equipment & accessories: - Steady rest - Chip conveyor In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and workholding devices shown are included in the scope of delivery only if noted in the additional information. Codpfx Aexq R Evsiieri Subject to technical changes, errors, and prior sale.

Condition: good (used), Year of construction: 2008, functionality: fully functional, turning length: 750 mm, turning diameter: 590 mm, spindle bore: 78 mm, spindle speed (max.): 3,000 rpm, Equipment: documentation/manual, Centre distance: 750 mm Swing: 590 mm over bed / 375 mm over slides Spindle speeds: 25 - 3.000 rpm Spindle bore: 78 mm Revolver: 10 Platze Controller: Siemens 810D Shopmill Crodpfx Aijxmvzusisi Featured with: - Double footpedals - Chipconveyor - Machine manuals Country of origin: Z. Korea Motor power: 25 kW Machine weight: 6.000 kg Machine LxWxH: 300 x 180 x 190 cm

Condition: excellent (used),