Used Workshop Stove for sale (4,366)

Condition: new, functionality: fully functional, power: 114 kW (155.00 HP), fuel: diesel, Equipment: documentation/manual, type plate available, The REMKO "CLK 120" heating cannon is a powerful heater suitable for use in warehouses, workshops, marquees, materials, greenhouses, and more. Currently, 3 units are immediately available from stock. Condition: New / unused from warehouse clearance / insolvency Scope of delivery: - 1 Remko CLK 120 heating unit with oil burner - 1 Roth mobile heating oil tank 1000 L - 1 room thermostat with connection cable Rated heat load: 114 kW Air output: 8050 m³/h Fuel: heating oil EL Fuel consumption: max. 11.2 L/h Flue gas loss: max. 9% Flue gas connection: Ø 200 mm Air outlet: Ø 500 mm Connection voltage: 230 V Dimensions (H/W/D): approx. 1350 x 920 x 2100 mm Weight: approx. 296 kg The machine can be viewed on site by appointment. Lajdpsxgbbtjfx Affjk All information without guarantee. Subject to prior sale.

Year of construction: 2024, condition: used, We are selling our workshop heater, which we have been using for about 1.5 years. The oven comes with a chimney pipe, as well as approximately 20 meters of ducting for warm air distribution. The unit is in good condition. Please note: collection and disassembly by the buyer only. If interested, please get in touch — we look forward to hearing from you! Technical specifications for the heater are as follows: — Nominal heat output: 30.00 kW — Maximum heat output: 35.00 kW / approx. 400 m² — Supplied with axial fan: Speed 1380 rpm, air flow: 4650 m³/h — Supplied with SCL-1515 fan control unit — Innovative air jacket design completely surrounding the combustion chamber for maximum efficiency — Durable combustion chamber, made entirely of certified boiler plate steel (16M06 #6mm thick) — Large flue which reduces fuel consumption by up to 30% — Energy efficiency class: A — Energy efficiency index: 110 — Net weight: 260 kg — Gross weight: 290 kg — Grate: 1000 x 250 mm — Coated with certified heat-resistant paint for corrosion protection and attractive appearance — Solid construction — High-performance combustion chamber (100 x 55 cm) — Large loading door — User manual included — Efficiency: 72.00% — CO emission at 13% O₂: 1.20 m — Recommended fuel: seasoned hardwood with moisture content ≤20%* mg/Nm³, briquettes, coal (up to 10%) Dimensions: — External dimensions (W x D x H): 650 mm x 1350 mm x 920 mm — Firebox dimensions (W x L x H): 550 mm x 1000 mm x 450 mm — Upper door (3 and 4 mm steel plate): 410 mm x 340 mm — Lower door (3 and 4 mm steel plate): 410 mm x 150 mm — Upper loading aperture: 320 mm x 320 mm — Lower opening: 320 mm x 130 mm — Grate: Width 250 mm x Depth 1000 mm — Hot air outlet diameter: Ø 150 mm Ljdpjxgf Scjfx Affsak — Flue gas outlet diameter: Ø 150 mm — Leg height: 140 mm

Condition: new, functionality: fully functional, power: 150 kW (203.94 HP), fuel: diesel, Equipment: documentation/manual, type plate available, The REMKO "CLK 150" heat cannon is a high-performance heater suitable for use in halls, workshops, marquees, materials, greenhouses, and more. Currently, 3 units are in stock for immediate delivery. Condition: New / unused from warehouse clearance / insolvency Scope of delivery: - 1 Remko CLK 150 heater with oil burner - 1 Roth mobile heating oil tank, 1000 L - 1 Room thermostat with connecting cable Nominal heat load: 150 kW Air output: 9710 m³/h Lodpfoxli I Sjx Affeak Fuel: EL heating oil Maximum fuel consumption: 14.8 L/h Flue gas losses: max. 9% Flue gas connection: Ø 200 mm Air outlet: Ø 500 mm Connection voltage: 230 V Dimensions (H/W/D): Approx. 1350 x 920 x 2100 mm Weight: approx. 312 kg The machine can be inspected on site by appointment. All information provided without guarantee. Subject to prior sale.

Year of construction: 2024, condition: new, Technical data of the furnace nominal heat output: 30,00 kW maximum heat output: 35,00 kW / approx. 400 m2 complete with: axial fan with speed: 1380 rpm and capacity: 4650 m3/h complete with: blower control unit SCL-1515 innovative design of the air jacket that completely surrounds the combustion chamber for maximum efficiency indestructible firebox, made entirely of certified boiler plate p265gh and 16M06 #6mm thick Large flue that reduces fuel consumption by up to 30%. Energy efficiency class: A energy efficiency index: 110 net weight: 260 kg gross weight: 290 kg Grille: 1000 x 250 mm coating with certified heat-resistant paint, which protects against corrosion and gives an aesthetic appearance Ledpfx Aspm Ex Hjffjak solid construction powerful combustion chamber 100 x 55cm! large loading door instruction manual efficiency: 72,00% CO emission at 13% O2: 1.20m Fuel type: recommended seasoned hardwood with moisture content ≤20%* mg/Nm3, briquettes, coal only up to 10%. Dimensions: External dimensions: overall width: 650mm x overall depth: 1350mm x overall height: 920mm. dimensions of the fireplace: width: 550mm x length: 1000mm x height: 450mm Dimensions of the upper door (3 and 4 mm sheet metal): Width: 410mm x Height: 340mm Dimensions of the lower door (3 and 4 mm sheet metal): Width: 410 mm x Height: 150mm Dimensions of the upper loading opening: width: 320mm x height: 320mm Dimensions of the lower opening: width: 320 mm x height: 130 mm dimensions of the grille: width: 250mm x depth: 1000mm Diameter of the hot air outlet: Ø 150mm diameter of the exhaust outlet: Ø 150mm Height of the feet: 140 mm

Condition: good (used), Drawer shelving, workshop drawer unit, tool cabinet – 9 drawers Laedpfox Ncv Hjx Affjk – large format, approximately 117 x 104 cm inside the drawer – each drawer has its own bearing. Made in Germany

Condition: not inspected (used), functionality: unexamined, total length: 830 mm, total width: 600 mm, total height: 1,000 mm, overall weight: 200 kg, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned due to a company closure. Placing a bid obligates the buyer to collect the machine within the period from 26.01.2026 to 29.01.2026! Contents include: HAUSER rotary table (diameter 400 mm) Lathe tools MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 830 mm x 600 mm x 1,000 mm Lasdpfjxqqgmjx Affjk Weight: 200 kg

Condition: not inspected (used), functionality: unexamined, total length: 1,500 mm, total width: 700 mm, total height: 1,200 mm, overall weight: 400 kg, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned off due to a business closure. Submitting a bid obligates you to collect within the specified period between 26/01/2026 and 29/01/2026! Three workshop drawer cabinets are up for auction. The contents include: RÖHM 3-jaw chuck (diameter: 200 mm) Clamping devices Reamers Twist drills Milling cutters Collets Milling table (table dimensions: 280 x 210 mm, with 4 T-slots) MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,500 x 700 x 1,200 mm Weight: 400 kg Lsdpexqm Imsfx Affjak

Condition: not inspected (used), functionality: unexamined, total length: 1,200 mm, total width: 770 mm, total height: 1,200 mm, overall weight: 400 kg, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Table diameter: 350 mm Table dimensions: 600 x 210 mm Number of T-slots: 4 Table dimensions: 600 x 200 mm Number of T-slots: 4 MACHINE DETAILS Dimensions (L x W x H): 1,200 x 770 x 1,200 mm Weight: 400 kg EQUIPMENT Collets Boring heads Various clamping devices Counter-holder Rotary table Ljdpfxjxqm Ers Affoak Milling tables All accessories suitable for DECKEL tool milling machines

Condition: not inspected (used), functionality: unexamined, total length: 1,370 mm, total width: 750 mm, total height: 1,100 mm, overall weight: 300 kg, No reserve price – guaranteed sale to the highest bidder! The machine is being auctioned off as part of a business liquidation. Placing a bid obligates timely collection between 26.01.2026 and 29.01.2026! Included: Boring heads Boring tools Collets High-speed milling head Counterholder Additional clamping equipment The accessories are suitable for DECKEL tool milling machines. MACHINE DETAILS Dimensions (L x W x H): 1,370 x 750 x 1,100 mm Weight: 300 kg Lodexqm Duepfx Affsak

Condition: excellent (used), Note: The pictures serve to clarify the material. - The workbench frames are commissioned unassembled; - The production time is usually approx. 3 - 5 working days. Basic dimensions: Width: approx. 5,950 mm Height: approx. 940 mm Depth: approx. 850 mm Ljdpfxetk Ikms Affeak The scope of delivery includes: 04x square tube, used Material color: sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drill hole grid: 75 x 50 mm Drill hole Ø: 13 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 5,650 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 550 mm 01x chipboard, used Chipboard thickness: 38 mm Chipboard width: approx. 5,950 mm Depth of chipboard: approx. 850 mm Surface: possibly coated (possibly two-piece) 08x Mounting bracket, new Finish: sendzimir galvanized Dimensions: approx. 140 x 275 x 105 mm (DxWxH) Hole spacing outside: approx. 250 mm Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm Self-drilling screws, new Finish: galvanized Dimensions: 6.3 x 70 mm 32x screws: M12 32x nuts: M12 32x washers: M12 Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: used, mileage: 35,276 km, power: 280 kW (380.69 HP), first registration: 06/1994, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: yellow, gearing type: mechanical, Equipment: ABS, all wheel drive, Chassis chassis: ideal for heavy construction site use, service + workshop truck, motorhome, expedition, flatbed, box, etc., MERCEDES-BENZ 8-cylinder engine, ZF-Transmatic manual gearbox (WSK), chassis with higher frame, large single tires, reinforced axles, raised exhaust, ABS, diff. lock HA, Isringhausen driver's comfort suspension seat, Isringhausen passenger's comfort suspension seat, central lubrication system, electric passenger door windows, rear window, exterior mirrors heatable and electr. adjustable, heated windshield, sun visor (outside), pop-up window, headlight range adjustment, side reflectors, auxiliary headlights and much more, 2 x rotating beacon, fuel preheater, front mounting plate, 4 x, hydr. connections at the front, external starter socket NATO, auxiliary headlights, external starter socket, 380 - 400V, battery isolator switch, leaf suspension, top condition, vehicle may have advertising stickers and/or lettering on it Lsdpfevnqi Hjx Affjak Our offer is generally without new TÜV approval. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or lettering. Our general terms of delivery and payment apply. We would be pleased to make you a financing or leasing offer for this object. Please contact us!

Condition: new, Year of construction: 2025, VIBER-SYSTEM WP100 Hydraulic Press Pressing force: 100 tons Piston stroke: 279.4 mm Working range (height): 101.6 – 1016 mm Working width: 812.8 mm Working pressure: 6.9 – 8.6 bar (100 – 125 PSI) Air connection: 1/4″ Operation type: Manual-pneumatic Lodpfjxdb Injx Affjak Dimensions (L × W × H): approx. 1092 × 991 × 1905 mm Net weight: 520 kg Gross weight (with packaging): 555 kg Structural element thickness: Frame: 15 mm, Table: 20 mm, Prism: 30 mm

Condition: used, functionality: fully functional, machine/vehicle number: 14324, Equipment: documentation/manual, lighting, For sale: Zeiss Jena Workshop Microscope WEMI – Large Version – with various accessories Offered for sale is a Zeiss Jena large workshop microscope, type WEMI, suitable for precise inspection and measurement applications in metalworking, toolmaking, quality control, and education. This robust and stable workshop microscope is renowned for its high optical quality and reliability. Thanks to its large design, the system is particularly suitable for inspecting larger workpieces with high precision. Specifications and features: • Manufacturer: Zeiss Jena • Type: WEMI (Werkstattmikroskop) • Model: Large workshop version • Very stable cast iron construction Ledpfox Ivr Ejx Affsak • High-quality Zeiss optics • Suitable for measurement, inspection, and visual control • Fine and precise focusing • Original operation manual included Accessories (including): • Various objectives • Eyepiece(s) • Analog measuring device • Illumination • Additional accessories as shown Condition: • Used, in good working order • Optics clear and undamaged • Normal signs of use consistent with age Delivery: • Includes all accessories as shown Price: • On request Location: • Klazienaveen, Netherlands If you are interested or require additional information, photos, or a viewing, please feel free to contact us via Machineseeker.

Condition: good (used), Year of construction: 2007, machine/vehicle number: 21009, Offer 25495 Technical specifications: - Max. pressing force: 150 t - Frame width approx.: 1570 mm - Frame depth approx.: 400 mm - Max. ram stroke approx.: 300 mm Ljdpfxjx Iufke Affsak - Ram can be moved laterally with handwheel - Frame bearing surface: 1570 / 400 mm - Max. installation height: 750 mm - Table height adjustable with 6 indexing pin positions, spacing per 250 mm - 2 support blocks (flat + for shafts) - Drive: 400 V / 11 kW - Required space approx.: W 2560 x H 2480 x D 1000 mm - Weight approx.: 2400 kg

Condition: good (used), Workshop trolley, 400kg load capacity – used - : Price per unit: €550 (net) Laodpfxjx El Haj Affok Manufacturer: unknown, probably Fetra Model: unknown Year of manufacture: unknown Load capacity: 400kg 2 fixed castors, 2 swivel castors Wooden worktop with 3-sided edge 4 drawers 1 cabinet door Wooden top width: approx. 1.20m Depth: approx. 69cm Height incl. worktop: 93cm Length with handle: approx. 1.30m Width of steel frame: 1.04m Cabinet door width: approx. 46cm Cabinet door height: approx. 56cm Drawer width: approx. 43cm Drawer depth: approx. 55cm Condition: good Available: immediately Location: Frankenberg / Saxony warehouse

Condition: good (used), The scope of delivery includes: 01x steel locker incl. frame with bench, used total width: 1.220 mm total height: 2.100 mm total depth: 850 mm steel locker height: 1.700 mm Lasdpfx Ajlluc Njffok steel spindle depth: 500 mm Steel spindle width: 1,220 mm Compartment dimensions: 1,590 x 400 x 500 mm (HxWxD) Central division per locker compartment rack dim. incl. bench: 1.220 x 850 x 400 mm (WxDxH) Material color: red Number of doors: 3 pieces with 6 ventilation slots Lockable by a rotary bolt lock with padlock ( padlock not included ) Please note: This is a used cabinet. There may be slight damage (eg scratches, dents, dirt or the like) may be present. General information about the item: This item is offered for pickup only. A transport desired beyond that or a shipment of this item is associated with additional costs, which are separately depending on the delivery location or scope of delivery can be requested from us.

Condition: used, mileage: 39,425 km, power: 280 kW (380.69 HP), first registration: 06/1995, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: yellow, gearing type: mechanical, Equipment: ABS, all wheel drive, Chassis chassis: ideal for heavy construction site use, service + workshop truck, motorhome, expedition, flatbed, box, etc., MERCEDES-BENZ 8-cylinder engine, ZF-Transmatic manual gearbox (WSK), chassis with higher frame, large single tires, reinforced axles, raised exhaust, ABS, diff. lock HA, Isringhausen driver's comfort suspension seat, Isringhausen passenger's comfort suspension seat, central lubrication system, electric passenger door windows, rear window, exterior mirrors heatable and electr. adjustable, heated windshield, sun visor (outside), pop-up window, headlight range adjustment, side reflectors, auxiliary headlights and much more, 2 x rotating beacon, fuel preheater, front mounting plate, 4 x, hydr. connections at the front, external starter socket NATO, auxiliary headlights, external starter socket, 380 - 400V, battery isolator switch, leaf suspension, top condition, vehicle may have advertising stickers and/or lettering on it Laedpfx Aevnqimeffsk Our offer is generally without new TÜV approval. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or lettering. Our general terms of delivery and payment apply. We would be pleased to make you a financing or leasing offer for this object. Please contact us!

Condition: used, Hydraulic workshop press, broaching press, keyway broaching press MaVo Type 5t-20 hydraulic workshop press Used for broaching keyways in through holes. Press force 5 tons (at 100 bar hydraulic pressure) Column width 770 mm Cylinder stroke 220 mm Laodpfxswki Apo Affjk Distance from threaded piston rod to table crosshead max. 900 mm Pressing speed (downward ram): approx. 11.5 mm/sec. = 220 mm in 19 seconds Pressing speed (upward ram): approx. 24.5 mm/sec. = 220 mm in 9 seconds. Motor power 5.5 kW Power supply 400 volts, 50 Hz - 2-hand control (2 buttons for down, 1 button for up) - HAWE hydraulic pump, type K5/3 (also delivers 400 bar, but the pump is very, very loud) - Threaded connection on the piston rod: M42 x 1.5 mm external thread - 1 screw-in extension, approx. 290 mm, for the piston rod with M42 x 1.5 mm internal thread - 1 screw-in extension, approx. 250 mm, for the piston rod with M42 x 1.5 mm internal thread - 2 ram extensions for insertion into the screw-in extension, 110 and 130 mm long - 2 support plates - Very sturdy steel construction made of 140 mm double I-beam - Durability of the steel construction probably 40 tons. or more - Mobile with pallet truck Space requirement: L x W x H 1200 x 930 x 2280 mm Weight: 485 kg

Condition: new, Year of construction: 2025, Firing chamber output: 49kW Working power: 45kW New appliance in original packaging: Yes Hot air blower, flue gas blower, electronic control with digital display: included Supply air filter, recirculation air intake filter: large-surface supply air filter without power loss / included Hot air conveying pipes: 2 x 200mm with plug-in freely rotatable 90° bends Smoke outlet diameter: 180mm Firebox length: 660mm Firebox width: 480mm Lodpfx Aepn Nyzjffjak Firebox height: 600mm Air flow : 3500m³/h Supply air filter: Yes, large-surface supply air filter without power losses Power consumption: 550W designed for room volume: 1000m³ Weight: 310 kg

Condition: good (used), functionality: fully functional, mileage: 118,266 km, power: 134 kW (182.19 HP), first registration: 07/2010, fuel type: diesel, empty load weight: 5,720 kg, maximum load weight: 3,280 kg, overall weight: 12,500 kg, tire size: 215/75 R 17.5, axle configuration: 2 axles, wheelbase: 3,690 mm, next inspection (TÜV): 01/2026, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 2, loading space volume: 24 m³, loading space length: 5,000 mm, loading space width: 2,230 mm, loading space height: 2,150 mm, Year of construction: 2010, operation weight: 9,000 kg, number of previous owners: 1, Equipment: ABS, power assisted steering, tail-lift, IVECO EUROCARGO ML 90E18 – 4X2 – EURO 5 – BOX BODY WITH WORKSHOP EQUIPMENT AND TAIL LIFT – BELGIAN VEHICLE First Registration: 12/07/2010 118,266 km CURSOR 4 ENGINE – 180 HP EURO 5 STANDARD AD BLUE SHORT CAB MECHANICAL SUSPENSION Wheelbase: 3,690 mm ABS – EBS Lodpfx Aox Hyywjffjak ZF 6-SPEED MANUAL GEARBOX ENGINE BRAKE CRUISE CONTROL SUN VISOR ELECTRIC WINDOWS AND MIRRORS TOW BALL HITCH ALUVAN BOX WITH HIGH-QUALITY WORKSHOP FIT-OUT: 5,000 x 2,230 x 2,150 mm SIDE DOOR REAR AWNING FOLDING DHOLLANDIA DHLM.10 TAIL LIFT, 1,000 KG CAPACITY TYRES: 215/75 R 17.5 Unladen Weight (PV): 5,720 kg Gross Vehicle Weight (GVW): 9,000 kg Payload: 3,280 kg Train Weight (MMA): 12,500 kg

Condition: excellent (used), Note: The pictures serve to clarify the material. - The workbench frames are commissioned unassembled; - The production time is usually approx. 3 - 5 working days. Basic dimensions: Width: approx. 3,300 mm Height: approx. 940 mm Depth: approx. 850 mm The scope of delivery includes: 04x square tube, used Material color: sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drill hole grid: 75 x 50 mm Drill hole Ø: 13 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 3,000 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 550 mm 01x chipboard, used Chipboard thickness: 38 mm Chipboard width: approx. 3,300 mm Depth of chipboard: approx. 850 mm Surface: possibly coated (two-piece if necessary) 08x Mounting bracket, new Finish: sendzimir galvanized Dimensions: approx. 140 x 275 x 105 mm (DxWxH) Hole spacing outside: approx. 250 mm Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm Self-drilling screws, new Finish: galvanized Dimensions: 6.3 x 70 mm 32x screws: M12 32x nuts: M12 32x washers: M12 Your contact persons in our company: Lsdpfx Aetk Irkoffsak Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: used, mileage: 32,799 km, power: 280 kW (380.69 HP), first registration: 06/1995, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: yellow, gearing type: mechanical, Equipment: ABS, all wheel drive, Chassis chassis: ideal for heavy construction site use, service + workshop truck, motorhome, expedition, flatbed, box, etc., MERCEDES-BENZ 8-cylinder engine, ZF-Transmatic manual gearbox (WSK), chassis with higher frame, large single tires, reinforced axles, raised exhaust, ABS, diff. lock HA, Isringhausen driver's comfort suspension seat, Isringhausen passenger's comfort suspension seat, central lubrication system, electric passenger door windows, rear window, exterior mirrors heatable and electr. adjustable, heated windshield, sun visor (outside), pop-up window, headlight range adjustment, side reflectors, auxiliary headlights and much more, 2 x rotating beacon, fuel preheater, front mounting plate, 4 x, hydr. connections at the front, external starter socket NATO, auxiliary headlights, external starter socket, 380 - 400V, battery isolator switch, leaf suspension, top condition, vehicle may have advertising stickers and/or lettering on it Our offer is generally without new TÜV approval. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or lettering. Our general terms of delivery and payment apply. We would be pleased to make you a financing or leasing offer for this object. Please contact us! Lasdevnqh Nopfx Affsk

Condition: excellent (used), Note: The pictures serve to clarify the material. - The workbench frames are commissioned unassembled; - The production time is usually approx. 3 - 5 working days. Basic dimensions: Width: approx. 3,200 mm Height: approx. 940 mm Depth: approx. 850 mm The scope of delivery includes: 04x square tube, used Material color: sendzimir galvanized Profile height: approx. 900 mm Ljdpfx Aetk Iwaoffeak Square profile: 140 x 140 x 4 mm Drill hole grid: 75 x 50 mm Drill hole Ø: 13 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 2,900 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 550 mm 01x chipboard, used Chipboard thickness: 38 mm Chipboard width: approx. 3,000 mm Depth of chipboard: approx. 850 mm Surface: possibly coated (two-piece if necessary) 08x Mounting bracket, new Finish: sendzimir galvanized Dimensions: approx. 140 x 275 x 105 mm (DxWxH) Hole spacing outside: approx. 250 mm Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm Self-drilling screws, new Finish: galvanized Dimensions: 6.3 x 70 mm 32x screws: M12 32x nuts: M12 32x washers: M12 Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: excellent (used), Note: The pictures serve to clarify the material. - The workbench frames are commissioned unassembled; - The production time is usually approx. 3 - 5 working days. Basic dimensions: Width: approx. 2,750 mm Height: approx. 940 mm Depth: approx. 850 mm The scope of delivery includes: 04x square tube, used Material color: sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drill hole grid: 75 x 50 mm Drill hole Ø: 13 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 2,450 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 550 mm 01x chipboard, used Chipboard thickness: 38 mm Chipboard width: approx. 2,750 mm Depth of chipboard: approx. 850 mm Surface: possibly coated (two-piece if necessary) 08x Mounting bracket, new Finish: sendzimir galvanized Dimensions: approx. 140 x 275 x 105 mm (DxWxH) Hole spacing outside: approx. 250 mm Lodpfxstk Iwpj Affjak Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm Self-drilling screws, new Finish: galvanized Dimensions: 6.3 x 70 mm 32x screws: M12 32x nuts: M12 32x washers: M12 Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: excellent (used), Note: The pictures serve to clarify the material. - The workbench frames are commissioned unassembled; - The production time is usually approx. 3 - 5 working days. Basic dimensions: Width: approx. 2,000 mm Height: approx. 940 mm Depth: approx. 850 mm The scope of delivery includes: 04x square tube, used Material color: sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drill hole grid: 75 x 50 mm Drill hole Ø: 13 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 1,700 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 550 mm 01x chipboard, used Chipboard thickness: 38 mm Chipboard width: approx. 2,000 mm Depth of chipboard: approx. 850 mm Surface: possibly coated (two-piece if necessary) 08x Mounting bracket, new Finish: sendzimir galvanized Dimensions: approx. 140 x 275 x 105 mm (DxWxH) Hole spacing outside: approx. 250 mm Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm 06x self-drilling screws, new Finish: galvanized Laodpfx Afsrtqm Djfek Dimensions: 6.3 x 70 mm 32x screws: M12 32x nuts: M12 32x washers: M12 Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.