Used Woodturning Lathe Db 450 for sale (11,551)

Condition: used, Year of construction: 1971, functionality: fully functional, turning diameter over bed: 900mm Lsdpjy Dti Tefx Ancjaa turning diameter over slide rest: 800 mm Center distance: 2.000 mm turning diameter: 1.200 mm turning diameter in the gap (with guide spindle pulled out to the right): approx. 1.460 max. width of the adjustable bed: 900 mm spindle bore: 85 mm turning rate: 14 - 710 min-1 dimensions (LxWxH), approx.: 4.705 x 2.060 x 2.000 mm equipment: 4 fold tool clamping system, HEIDENHAIN three-axis digital readout, Three jawchuck FORKARDT F400, Vibration damping elements

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, turning diameter over bed: 540 mm turning length: 1.500 mm turning diameter in the recess: 580 Laodpfx Aney Dtiyecja Working travel of the lower slide max. approx.: 415 mm adjustment of upper support, max. approx.: 140 mm turning speed range: 0 - 1.800 U/min diam. of main spinde: 135 mm spindle bore: 68 mm internal taper diameter: 73 mm bed width: 403 mm Equipped with: Three jaw chucks FORKARDT 250 Digital read out 3 axis fixed steady rest feed safety chip tray tool holders, 6 chisel holders, 1 holder for clamping sleeve

Condition: used, Year of construction: 2006, functionality: limited functionality, Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 mm Swing diameter over face slide: 260 mm Face slide travel: 380 mm Main drive Drive power AC motor - 40/60/100% duty cycle: 33/27/22 kW Spindle box Spindle bore diameter: 106 mm Spindle diameter in front bearing: 140 mm Speed range (V constant): 1 - 2,000 rpm Cross slide Feed range, face: 0.001 - 1,000 mm/rev Feed range, face, optional up to: 5,000 mm/rev Feed range, longitudinal and thread pitch: 0.001 - 2,000 mm/rev Feed range longitudinal and thread pitch, optional up to: 13,000 mm/rev Feed force flat: 9,000 N Feed force longitudinal: 12,000 N Automatic tool turret Number of tool stations: 12 With tool drive for 6 stations Tool holder system (DIN69880) VDI40 Equipment SIMENS SINUMERIK 840D sl (Shop Turn with manual functions) COMBI control station C-axis with drilling, milling, and engraving cycles Residual material detection and machining – during roughing and contour pockets MULTIFIX C forne setup Lsdpfx Anjy Dtgxjcjaa Three-jaw chuck SMW AUTOBLOK: HI-GRIP HGF260-81-3 Oil emulsion mist filter for work area extraction: MAHLE LTA600

Condition: good (used), Year of construction: 1972, functionality: fully functional, Swing diameter over bed: 1,650 mm Swing diameter over support: 1,350 mm Turning length: 10,000 mm Bed width: 1,120 mm Laodpfey Dtd Rex Ancea Spindle speed range: 1.4 - 280 rpm Max. torque, approx.: 20,000 Nm Workpiece weight between centers, max.: 10,000 kg With 1 steady rest / follow rest: 12,500 kg Equipment 3-axis digital readout: ACU RITE 1 steady rest 1 roller support

Condition: used, Year of construction: 2018, total length: 3,350 mm, total width: 1,000 mm, total height: 1,530 mm, Empty weight: 3.000 kg - Year: 2018 - Documentation available: No - CE certificate present: No - Drive system: Conventional - Centre height [mm]: 260 - Swing over bed [mm]: 460 - Distance between centres [mm]: 2000 - Bed width [mm]: 220 Ljdpfxsy Drzue Ancsaa - Spindle bore [mm]: 82 - Min. spindle speed [rpm]: 25 - Max. spindle speed [rpm]: 2000 - Options: Quick-change tool post, Three-jaw chuck, Digital readout - Type of digital readout: SINO SDS6-3V - Transport dimensions: 3350mm x 1000mm x 1530mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, 4 Axis Year Of Manufacture: 1998 8” Chuck 2 Turrets – Turret 1 – 12 Stations Turret 2 – 8 Stations Programable Tailstock 750mm Between Centres Live Tooling Lsdpfx Ansy Druneceaa C Axis Touch setter Y axis Swarf Conveyor Okuma OSP 7000L Control

Condition: used, Year of construction: 1986, Technical details: turning diameter over bed: 1000 mm turning diameter over slide rest: 745 mm turning length: 3000 mm turning speed range: 4,5 - 900 U/min spindle bore: 110 mm max. workpiece weight between centres: 12500 kg total power requirement: 30 kW weight of the machine ca.: 9 t dimensions of the machine ca.: 5,2 x 2,3 x 2 m 3-axes digital readout rapid feed, feed at upper support 350 mm 1 fixed steady face plate diameter 1000 mm Laedsvgmlnspfx Ancoa coolant attachment *

Condition: used, Year of construction: 2005, Technical details: turning diameter over bed: 340 mm turning diameter over slide rest: 190 mm Lasdpfx Ajx Apd Usncja turning length: 700 mm spindle bore: 50 mm spindle turning speed range: 40 - 3000 U/min total power requirement: 6 kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 2 x 1 x 1,6 m

Condition: used, Year of construction: 2000, Technical details: turning diameter: 800 mm turning length: 2965 mm max. turning dia. over saddle: 520 mm spindle bore: 92 mm turning speed range: 3 - 1800 U/min spindle head: Größe 11 total power requirement: 37 kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 5,2 x 2,2 x 1,9 m Ledpfx Aexxig Usncoaa Teach In Control MTC-K 3-jaw chuck ROTAS Dia. 400 mm face plate RÖHM Dia. 630 mm 4-station toolholder system PARAT 1 fixed steady coolant attachment and chip conveyor *

Condition: used, Year of construction: 1996, Technical details: turning diameter: 500 mm turning length: 1500 mm turning diameter over bed slide: 290 spindle bore: 71 mm turning speed range: 3 - 2800 U/min rapid speed: 10 / 5 m/min feed speeds: 1 - 2000 mm/min total power requirement: 22 kW weight of the machine ca.: 3,2 t dimensions of the machine ca.: 3,0 x 1,6 x 2 m with Teach In controll R&D MTC-K Lasdpfxswwlvle Ancea PARAT toolpost 1 fixed steday dia. 100 mm 4 jaw face plate dia. 500 mm coolant attachment *

Condition: used, Year of construction: 1998, Technical details: turning diameter: 830 mm turning length: 4000 mm turning diameter over bed slide: 540 mm spindle bore: 130 mm turning speed range: 2 - 1600 U/min rapid speed: 4 / 5 m/min Laodpfswwlt Rjx Ancja feed speeds: 1 - 2000 mm/min total power requirement: 55 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 7 x 2,2 x 2 m with Teach In controll R&D MTC-K MULTIFIX toolpost size D coolant attachment *

Condition: used, mileage: 955,935 km, first registration: 03/2017, fuel type: diesel, tire size: 315/70 R22.5, axle configuration: 4x2, fuel: diesel, brakes: retarder, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2017, Equipment: ABS, central locking, cruise control, electric window regulation, fridge, parking heater, power mirror, retarder, spoiler, = Additional Options and Equipment = - CD player - Roof spoiler - Spare key - Speed limiter - Aluminum fuel tank - Alloy wheels - Engine brake - Power take-off (PTO) - Headlights - Side skirts - Stability control - Standard air conditioning - Visor - Alternating current - Toolbox - Xenon lights = Further Information = Tire size: 315/70 R22.5 Axle brand: Anders Brakes: Disc brakes Front axle: Steered; Left tire tread: 4 mm; Right tire tread: 5 mm; Suspension: Leaf spring Rear axle: Twin tires; Rear left inner tread: 6 mm; Rear left outer tread: 7 mm; Rear right inner tread: 7 mm; Rear right outer tread: 1 mm; Suspension: Air suspension Unladen weight: 7,813 kg Payload: 11,187 kg Gross vehicle weight: 19,000 kg Lajdpfjy Exvbox Ancja Damages: None

Condition: excellent (used), Year of construction: 2017, Ferromatik Milacron Magna T(MTs) 150-450 / Production line with Wemo 6-5 xDesign robot, Wemo WCS-R conveyor belt, and safety enclosure / Machine in very good technical condition Year of manufacture: 2017 Injection unit: Screw diameter: 45 mm Shot weight: 215 g Injection pressure: 1,984 bar Dosage volume: 226 cm³ Clamping unit: Clamping force: 150 t Tie bar distance: 510x510 mm Platen size: 740x740 mm Ejector: hydraulic Clamping system: toggle Control system: B&R - touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Operating hours: 11,000 in automatic mode Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Hot runner controller x 36 (available for an additional charge) Ljdsy Dqdbspfx Ancsaa Injection unit is wear-resistant and corrosion-resistant Main motor – servo motor with inverter drive Central lubrication Machine equipped with cylinder / battery with compressed nitrogen (extra charge for high-speed operation) Wemo 6-5 xDesign robot Year of manufacture: 2017 4-axis robot: 3 axes driven by electric servomotors Robot safety package included Robot with adapter, Wemo WCS-R conveyor belt, and safety enclosure Purchase of robot and conveyor belt available at extra cost Dimensions: Weight: 7,500 kg Length/Width/Height: 6.10 x 1.97 x 2.60 m Drive: Pump/motor: 11.5 kW Heating capacity: 11.3 kW Total power: 22.8 kW All machines offered are started up and tested by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: 25,000.00 EUR net (price without robot)

Condition: good (used), Year of construction: 2005, functionality: fully functional, turning length: 500 mm, turning diameter: 320 mm, Fanuc Oi-TD cnc control collet chuck device 10-fold revolver tail stock chip conveyor Technische Daten: / technical details max. Drehdurchmesser / max. turning diameter 320 mm max. Drehlänge / max. turning length 500 mm Lsdpfx Ansy Dqvwjcsaa X-Weg / X-travel 180 mm Z-Weg / Z-travel 520 mm max. Drehzahl / max. spindle speed 6000 UpM /rpm Anzahl der Revolverplätze / number of tool places 10 Gewicht ca. / weight ca. 3200 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: excellent (used), Year of construction: 2012, Control: Fanuc 0i-TD Equipment: Lsdoy Dqb Tepfx Ancjaa - various tool holders - various driven tools - C-axis, driven tools Max. turning diameter: Ø 500 mm Max. turning length: 600 mm Bar capacity: Ø 75.5 mm Spindle speed: 3500 rpm Spindle nose: A2 - 8 Machine weight: 6,700 kg

Condition: used, functionality: fully functional, mileage: 406,631 km, first registration: 11/2016, Year of construction: 2016, IVECO TRAKKER 450 with CIFA concrete mixer First registration 16th November 2016 - Euro 6 406,631 km 4 axles Fitted with CIFA RY1300 - PTO Laodpfjy Exgaox Ancja Tyres 60/70% Good condition Valid inspection Available immediately WE CONSIDER TRADE-INS OF VEHICLES OF ALL BRANDS, MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA, WITH CIFA, SERMAC, PUTZMEISTER EQUIPMENT, OR EARTHMOVING MACHINERY FROM CATERPILLAR, FIAT HITACHI, KOMATSU.

Condition: ready for operation (used), Year of construction: 1965, functionality: fully functional, spindle bore: 62 mm, turning diameter: 580 mm, center height: 275 mm, center width: 2,000 mm, total length: 4,000 mm, total width: 1,250 mm, total height: 1,300 mm, overall weight: 3,400 kg, Ladies and Gentlemen, We are selling a fully functional lathe of the type Schaerer UDA560 with lynette, some steel holders and technical documentation. Availability: immediately Year of manufacture: 1965 Lajdpfju St Rrsx Ancsa Center height: 275mm Center distance: 2000mm Spindle bore: 62mm Max. turning diameter: 580mm Max. Max. turning diameter in the recess: 630mm Space requirement: 4.00x1.25x1.30m (LxWxH) Weight: approx. 3400kg Accessories: various steel holders, lynette, machine card

Condition: good (used), Stock number: 3074 Brand: Weiler Year of manufacture: Type/Model: LZD 220 Machine number: Control: conventional Centre distance: 400 mm Spindle bore: 23 mm Centre height: 110 mm Swing diameter over bed: 220 mm over cross slide: mm Speed range: 50 to 2,000 rpm Longitudinal feed: mm/rev Cross feed: mm/rev Connected load: 0.4 kW Accessories/Equipment: quick-change tool post Condition: good Weight: 280 kg Dimensions: 1,100 x 600 x 1,200 mm Ljdpjyg N E Usfx Ancsaa

Condition: good (used), Year of construction: 2004, functionality: fully functional, Technical details turning diameter 570 mm Lodpfsy Dpvvsx Anceaa turning length 2000 mm control Heidenhain turning diameter over bed slide 340 spindle turning speed range 1 - 2500 U/min weight of the machine ca. 3,6 t Additional information Features: 2 steady rests Manual chuck with jaws Tool holder with inserts

Condition: used, turning diameter over bed 1650 mm turning diameter over slide rest 1200 mm turning length 7500 mm turning dia. in gap 2500 mm spindle diameter 105 mm speed 3,55 - 180 (x24) U/min voltage 380 V 4-jaw faceplate Ø 1.600 mm Steady rest Ø 700 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Ledpfsyqthbjx Ancsaa If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 6,000 rpm, overall weight: 6,500 kg, Fanuc 18ITB parts diameter 130 mm, length 110 mm spindle speed 7500 rpm 12-station turret max tool speed 6000 rpm power 24 kW, chip conveyor Laedsx Irzvspfx Ancoa

Condition: good (used), For sale: High-performance dual-spindle CNC lathe Biglia B.750-YS. This versatile machine combines power and precision at a millimeter scale, ideal for complex machining of medium and large workpieces. Brand: BIGLIA Model: B.750-YS (with Y-axis and sub-spindle) Year: 2020 Control: Fanuc Series 32i-B with Dual Check Safety Key features: Bar capacity: Ø 80 mm (maximum capacity Ø 93 mm) Laodjy Dpu Sopfx Ancsa Maximum turning diameter: 552 mm Turret: 16 driven stations (speed 6,000 rpm) with direct-drive integrated motor for increased accuracy Travel: X=305 mm, Y=140 mm (+/- 70), Z=860 mm

Condition: used, mileage: 666,540 km, first registration: 06/2016, SCANIA G450, Year 2016, Euro 6, white color, 666,540 km, wheelbase 5100 mm, short cab, low roof, intarder, retarder, steered 1st, 2nd, and 4th axle, alloy wheels, fully equipped. Lajdpsy Ew Hrefx Ancea

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Options: Lodpfx Aoy Ew Hlsncsaa Chip conveyor High-pressure pump ISO programming Tooling

Condition: used, turning diameter over bed 1150 mm turning diameter over slide rest 800 mm turning length 6300 mm spindle diameter 100 mm speed 4-800 (x24) U/min turning dia. in gap 1500 mm Rapid toolpost Power compound Rapid traverse 4-jaw chuck ø (mm): 800 Fixed steady rest ø (mm): 2x 400 Through-spindle cooling The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Lasdpfx Ajyqtl Hencoa Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team