Used Woodturning Lathe Db 450 for sale (21,320)

Condition: ready for operation (used), Year of construction: 2013, operating hours: 24,412 h, functionality: fully functional, turning length: 1,000 mm, turning diameter: 300 mm, travel distance X-axis: 235 mm, travel distance Z-axis: 1,144 mm, controller model: OSP P300L-R, TECHNICAL DETAILS X-axis travel: 235 mm Z-axis travel: 1,144 mm Turning length: 1,000 mm Turning diameter: 300 mm Swing over bed: 450 mm Lsdpfxexxi Ulj Agroai Turret: 12 positions – all driven Spindle speed: 45 – 4,500 rpm Spindle bore: 68 mm Tool holder: VDI 40 MACHINE DETAILS Control: OSP P300L-R Weight: 6,600 kg Operating hours: 24,412 h EQUIPMENT Chip conveyor Chuck diameter 250 mm Touch setter Tailstock

Condition: refurbished (used), functionality: limited functionality, Year of construction: 2003, operating hours: 24,000 h, pipe diameter (max.): 100 mm, pipe length (max.): 4,100 mm, bending angle (max.): 183 °, bending radius (max.): 300 mm, wall thickness: 8 mm, Transfluid DB 2090 DB CNC Mandrel Tube Bending Machine. Excellent High Quality Germany Machine, with fully refurbished main hydraulic pumps and main head fully reconditioned. Only requires new encoder to be fitted and this machine is ready to go. Features include. 100mm x 1.6mm Tube Maximum Capacity at 1.5D Anticipated Mandrel Withdrawal Fully automatic setup of clamps and follower Boosted Follower for tight radius thin wall tube bending. Long bed with 4000mm over mandrel. Comes with huge amount of tooling worth over AU$150k. Tooling Included: 101.6mm 152mm CLR 101.6mm 200mm CLR Laedpfx Agotrd T Tersi 76.2mm 114mm CLR 76.2mm 200mm CLR 76.2mm 238mm CLR 63.5mm 96mm CLR 57.2mm 86mm CLR 50.8mm 76mm CLR 44.5mm 67mm CLR 40 x 40 120mm CLR 50 x 50 150mm CLR 60.3mm 150mm CLR 48.3mm 120mm CLR

Condition: used, turning diameter over bed 260 mm turning diameter over slide rest 140 mm turning length 500 mm centre height 125 mm bed width 160 mm spindle turning speed range 16: 110-3600 U/min spindle bore 28 mm face slide travel 120 mm upper slide-adjustment 120 mm tailstock quill taper MT 2 tailstock quill adjustment 80 mm drive motor 0,37 / 0,88 kW weight of the machine ca. 350 kg Lodevtthiopfx Agreai dimensions of the machine ca. 1,3 x 0,6 x 1,2 m Mechanic's lathe with manual feed and spindle support, drive via V-belt and stepped pulleys as well as 2-pole motor, hardened, finely ground work spindle, support adjustment over the entire bed length using eccentric clamping lever, three-jaw chuck, collet device with pliers, crank tailstock, cast base. Machine dealer with own stock of 1600 m².

Condition: good (used), mileage: 818,020 km, power: 330 kW (448.67 HP), first registration: 04/2018, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,150 mm, total width: 2,550 mm, total height: 4,020 mm, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, parking heater, traction control, = Additional Options and Equipment = - Second diesel tank - Digital tachograph - Electric mirrors - Tachograph (recording device) - Fixed fifth wheel - Space Cab = Notes = Number of axles: 2, Configuration: 4x2, Unladen weight: 8,343 kg, Gross weight: 20,500 kg, Total fuel capacity: 1,365 liters, Second diesel tank, Fifth wheel height: 116 cm, Fifth wheel: Fixed, Number of differential locks: 1, Suspension type: Air suspension, Cab type: Space Cab, Cruise control, Tachograph (recording device), Digital tachograph, Air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Color: Multicolor, Heated mirrors, Lighting type: Halogen lamp, Lane keeping assist, Climate control, Seat heating, Engine output: 330 kW (443 Hp), Fuel: Diesel, Emissions class: Euro 6, Transmission type: AS-Tronic, Gearbox type: ZF, Gears: 12, Power steering, ABS, ASR, Starter battery, Central locking, Seating configuration: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual = Further Information = Transmission Transmission: ZF, 12 gears, automatic Axle configuration Brakes: Disc brakes Axle 1: Tyre size: 315/80R22.5; steered; left tyre tread: 7 mm; right tyre tread: 6 mm; suspension: leaf spring Axle 2: Tyre size: 315/70R22.5; twin tires; left inner tyre tread: 3 mm; left outer tyre tread: 5 mm; right inner tyre tread: 2 mm; right outer tyre tread: 4 mm; suspension: air suspension Weights Unladen weight: 8,343 kg Payload: 12,157 kg Gross vehicle weight: 20,500 kg Maintenance APK (Technical inspection): valid until 04.2026 Condition Technical condition: good Visual condition: good Damage: none Number of keys: 1 Identification Registration: KLEYN1 = Company Information = Lasdexyp D Nopfx Agrei Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European brands, years of manufacture, and price categories. Why buy at Kleyn Trucks? Simple! • Large, rapidly changing inventory • Recognizable quality • Good prices • Reliable professionalism • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Expert technical services • The security of 'recognizable quality' • And more.... Please visit our website for special offers and the complete stock list. Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry via our website. Contact us directly regarding our European warranty package.

Condition: excellent (used), Year of construction: 2017, operating hours: 901 h, functionality: fully functional, Controller HAAS (15 inch LCD screen, USB, 1 Mb Programspeichern, Ethernet, IQS, VPC) Chuck dia D210 mm Swing dia over bed 419 mm Max. turning dia D279 mm Max. turning length 406 mm X travel 305 mm Y travel +/-51 mm Z travel 406 mm Spindle bore D88,9 mm Max. bar diameter D64 mm C axis 0,01 degree Spindle speed 4000 rpm Spindle nose A2-6 Max. driven tool speed 6000 rpm Rapid speed X/Y/Z = 12 / 12 / 30,5 m/min. Spindle power 14,9 kW Turret Hybrid 6 x BOT / 6 x VDI40 - 12-fold Tailstock sleeve MT3 Tailstock sleeve D95 mm Tailstock travel 508 mm Power required 400V, 40A Weight 3600 kgs Dimensions LxWxH = 3200 x 1540 x 1803 mm Accessories, features - C axis programmable - Y axis - Driven tool turret (all positions) - Integrated tool presetter - Chip conveyor - 3 jaws chuck D210 mm - Tailstock - Makros and software options - Tailstock The machine can be fine in very good condition (only 900 feedrate hours). Ljdpfxoxylx No Agrsai

Condition: used, Year of construction: 1965, multifix ja centre distance 1500 mm Ledpfx Agsxylq Eerjai documentation ja weight of the machine ca. 3 t

Condition: used, Year of construction: 2009, swing diameter 1600 mm face diameter 1400 mm Control Siemens Sinumerik 840D SL turning height 1245 mm max. table load 9000 kg table drive 60 kW torque - table 13400 Nm Table rpm 450 1/min speeds c-axis 0,004-5 1/min. feed range 18000 mm/min dimensions of the machine ca. 8,5 x 5,3 x 5,7 m weight of the machine ca. 47,4 t Crossbeam support: -Travel range X-axis: ± 950 mm Crossbeam stroke W-axis: 600 mm Ram : -Cross-section Ram: 250 x 250 mm -Plunging diameter: 340 mm -Travel Z-axis Ram: 1100 mm Drilling and milling device: - Distance between milling spindle and machine table 1245 mm - Tool holder SK 50 - Drive power 30 kW - Speed range 2000 rpm - Torque 1395 Nm Equipment/accessories: -16-40-fold pick-up magazine -Protective device -Various turning tool holders -Various SK50 tool holders and tools -Various clamping devices -Coolant device with filter Lsdpfx Aoxylm Togrjai -Chip conveyor -Documentation

Condition: like new (used), Year of construction: 2022, MAZAK QUICK TURN 350MY 1500U Max. turning diameter: 830 mm Max. turning length: 1,539 mm Max. milling speed: 4,500 rpm Max. spindle speed: 3,300 rpm Max. bar diameter: 102 mm The machine is equipped with: Lasdpfx Asxyk Hrjgroi - Mazatrol SmoothG CNC control - KITAGAWA three-jaw chuck BR-12, diameter 304 mm - Tool Eye - C-axis - Y-axis - SMW steady rest - NC tailstock - Reinforced coolant pump - Chip conveyor - 8 pcs. fixed tool holders - 2 pcs. driven tool holders

Year of construction: 2012, condition: reconditioned (used), Conventional Precision Lathe WEILER “CONDOR VC” With Siemens 3-axis digital readout Year of manufacture: 2012 Spindle bore: 56 mm Centre distance: 800 mm Swing over bed: 205 mm Speed range: 30 – 3500 rpm Supplied with the following accessories: Multifix tool holder Chip guard with internal lighting Coolant system 3-jaw chuck Ø 200 mm Chuck guard Lajdpfx Agexykz Ajroi Follow rest Ø approx. 150 mm Tailstock with retractable quill Operating manual

Condition: used, mileage: 908,440 km, power: 330 kW (448.67 HP), first registration: 03/2018, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,160 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, parking heater, traction control, = Additional Options and Accessories = - Second diesel tank - Digital tachograph - Electric mirrors - Tachograph (control device) - Fixed (installation) - Space Cab = Notes = Number of axles: 2, Configuration: 4x2, Unladen weight: 8,353 kg, Gross weight: 20,500 kg, Total fuel tank capacity: 1,435 liters, Second diesel tank, Fifth wheel height: 117 cm, Fifth wheel: fixed, Number of diff locks: 1, Suspension type: air suspension, Cab type: Space Cab, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, Color: multicolored, Heated mirrors, Lighting type: halogen lamp, Lane departure warning, Climate control, Seat heating, Engine output: 330 kW (443 Hp), Fuel: diesel, Euro: 6, Transmission type: AS-Tronic, Gearbox: ZF, Gears: 12, Power steering, ABS, ASR, starter battery, Central locking, Seating arrangement: 1+1, Seat material: fabric, Seat adjustment: manual = Further Information = Gearbox Gearbox: ZF, 12 gears, automatic Axle Configuration Brakes: disc brakes Axle 1: Tire size: 315/70R22.5; steered; Left tire tread: 4 mm; Right tire tread: 7 mm; Suspension: leaf spring Axle 2: Tire size: 315/80R22.5; twin tires; Left inside tread: 8 mm; Left outside tread: 6 mm; Right inside tread: 8 mm; Right outside tread: 5 mm; Suspension: air suspension Weights Unladen weight: 8,353 kg Payload: 12,147 kg Gross vehicle weight: 20,500 kg Condition General condition: average Lajdpfoxyp D Aex Agrei Technical condition: average Optical condition: average Damages: none Number of keys: 2 Identification Registration number: KLEYN1 = Company Information = Kleyn Trucks is one of the world’s largest independent used vehicle dealers. Choose from a continuously changing stock of 1,200 used trucks, tractor units, and trailers. Our selection covers all European brands, years, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • Good pricing • Reliable business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration plates arranged quickly • Professional technical services • The security of “recognizable quality” • And more… Visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is available in most European countries! Quickly calculate your lease rate and send your inquiry via our website. Ask directly about our European warranty packages.

Condition: good (used), Year of construction: 1985, Heavy duty lathe SN1250X10000 as follows: Manufacturer: 1MAI PLOIESTI (Romania) Year of manufacture: 1985 Ledpfxoxygdys Agreai Main technical data: • Face plate diameter: 1250 mm • Max. swing over bed: 1250 mm • Max. swing over slide: 970 mm • Height of centers: 625 mm • Distance between centers: 10,000 mm • Max. weight of the workpiece: 16 t • Speed range of the main spindle: 0.8 – 160 rpm • Main drive motor: 75 kW • Longitudinal feed: 0.4 – 480 mm/min • Transversal feed: 0.2 – 240 mm/min • Intermediate slide feed: 0.15 – 180 mm/min • Intermediate slide travel: 500 mm • Cross slide travel: 520 mm • Tool holder travel: 175 mm • Machine weight: approx. 29,000 kg Accessories: - 4-jaw face plate - 5 steady rests The lathe is in good condition. For more details please contact us.

Condition: like new (used), For sale is a used Format4 Kappa 450 sliding table panel saw with a cutting length of 2800 mm. This machine is currently being used as a showroom display unit and is therefore in like-new condition. Technical specifications: - Cutting length: 2800 mm - Cutting width: 800 mm - Cutting height: 155 mm - Max. saw blade diameter: 450 mm - Electrically adjustable height and tilting - Extraction port Ø 120 mm - Motor power: 7.5 kW / 10.2 HP - Year of manufacture: 2023 The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! For more information call: 06244-20299 Related terms: saw, circular saw, panel saw, sliding table saw Lsdjw Hd Sqspfx Agrsai Reference: R-A0117

Condition: used, Year of construction: 2009, swing diameter 2800 mm faceplate diameter 2200 mm control Siemens Sinumerik 840D turning height 2140 mm max. table load 17000 kg table drive 80 kW torque - table 44900 Nm Table rpm 280 1/min speeds c-axis 0,006-7,5 1/min feed range 18000 mm/min total power requirement 160 kW weight of the machine ca. 61,1 t dimensions of the machine ca. 11,4 x 6,53 x 6,6 m Crossbeam support: -Travel range X-axis: ± 1550 mm Crossbeam travel W-axis: 1200 mm Ram: -Cross-section: 300 x 250 mm -Plunging diameter: 380 mm -Travel range Z-axis: 1750 mm Drilling and milling equipment: - Distance between milling spindle and machine table - SK 50 tool holder - Drive power 30 kW - Speed range - 2000 rpm - Torque 1395 Nm Equipment/accessories: -24-72 times pick-up magazine -Protective device -Various turning tool holder Ljdjxylmyjpfx Agroai -Various tool holders SK 50 with tools -Various clamping vices -Coolant device with filter -Chip conveyor -Documentation

Condition: excellent (used), functionality: fully functional, High-Precision Lead and Feed Screw Lathe Model B30 LZS with Accessory Cabinet and 3-Axis Fagor DRO from UNI Technical Data: >> Centre Height: 120 mm >> Centre Distance: 560 mm >> Spindle Bore: 30 mm >> Max. Swing Diameter: 250 mm >> Longitudinal and Cross Feeds >> Thread Cutting: Metric, Module, Inch >> Infinitely variable spindle speeds from 30–3000 rpm Accessories: - 3-Axis Fagor Digital Readout - Tool cabinet including: >> 3-jaw chuck >> 4-jaw chuck Ljdpfoxyh Ndjx Agroai >> Toolholder >> Drill chuck; live centre >> Collet chuck with collets >> Fixed and travelling steady rest >> Machine feet >> And much more About the Machine: Offered is a Lorch high-precision lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move smoothly and evenly. The machine runs quietly, even at high speeds. Equipped with a 3-axis Fagor digital readout and a wide range of accessories. The machine was previously installed in a university. You are welcome to inspect the machine under power on site and see its excellent condition for yourself.

Condition: good (used), functionality: fully functional, Original CNC (not a retrofit from conventional to CNC) Control: Siemens 8-M Faceplate diameter: 3500 mm Max. turning diameter: 4000 mm Max. turning height: 2500 mm Vertical stroke of ram: 1600 mm Horizontal stroke of ram: 2200 mm Ram cross-section: 250 x 210 mm Min. internal diameter: 360 mm Vertical travel of cross-slide: 2000 mm/min Chuck motor power: 71 kW Chuck speed: up to 90 rpm (2-speed gearbox) Table load capacity: 40 tons Feed rate: 1000 mm/min Rapid traverse: 6000 mm/min Lsdpfx Agjxyh Hvsroai

Condition: used, Year of construction: 2012, Machine Designation: Vertical Machining Center LCV-760 (Moving Column Type) Manufacturer: LEADWELL CNC Machines Mfg. Corp., Taichung, Taiwan Type / Model: LCV-760 Control System: FANUC Oi-MD Technical Specifications • Working Area / Travels: - X-axis travel: 760 mm - Y-axis travel: 610 mm - Z-axis travel: 610 mm - Distance from table (pallet) top to spindle nose: 150 – 760 mm - Distance from column front to spindle center: 718 mm - Table dimensions: 850 × 600 mm - Maximum workpiece weight: 400 kg - Table configuration: M16 × P2.0 mm T-slots - Table height (floor to table top): 1,033 mm • Spindle / Drive: - Spindle speed: 10,000 rpm (optional: 12,000 rpm) - Spindle drive motor: 18.5 / 24 kW (30 min / continuous duty) - Maximum spindle torque: 95 Nm (67.5 ft-lb) - Spindle taper: 7/24 TAPER No. 40 (BT-40) - Spindle bearing inner diameter: 70 mm - Tool clamping force: 1,200 kgf - Transmission: HT.D belt drive - Spindle oil chiller: included - Rigid tapping: standard • Feedrates: - Rapid traverse (X / Y / Z): 32 / 32 / 32 m/min - Cutting feedrate: 10 m/min - Jog feedrate: 2,500 mm/min • Automatic Tool Changer (ATC): - Type: Arm-type changer - Tool capacity: 30 tools - Tool taper: BT-40 - Retention knob: MAS P40T-1 (JIS B-6339) - Max. tool diameter (adjacent): 80 mm - Max. tool diameter (free): 100 mm - Max. tool length: 250 mm - Max. tool weight: 7 kg - Tool change time (tool-to-tool): 2 s - Chip-to-chip: 6 s • Automatic Pallet Changer (APC): - Number of pallets: 2 - Change method: hydraulic swapper - Pallet change time: 12 s • Motors: - Spindle motor: 18.5 kW (24 HP) - X-axis feed motor: 4.5 kW (6.4 HP), 30 Nm torque - Y-axis feed motor: 4.5 kW (6.4 HP), 30 Nm torque - Z-axis feed motor: 3.88 kW (5.4 HP), 22 Nm torque - Hydraulic pump motor: 3 kW - Lubrication pump motor: 0.01 kW - Coolant pump motor: 0.76 kW • Guideways: - X-axis: SNS45C2SSCOEx3 (600 mm width, 1,000 mm distance) - Y-axis: SNS45LC2X151SLHx2 (600 mm width, 600 mm distance) - Z-axis: SHS45R2SSCOEx1305×2 (500 mm distance) • Utilities / Connections: - Power supply: 45 kVA - Compressed air: 0.6 MPa (87 psi), 400 L/min - Hydraulic oil tank: 400 L - Lubrication tank: 2 L - Coolant tank: 300 L Lajdpfx Agjxnlhgjroi • Dimensions / Weight: - Machine height: 2,885 mm - Machine footprint: 3,510 × 2,410 mm - Machine weight: 9,200 – 9,500 kg (approx. 10 t) lifting requirement • Cutting Capacities: - Milling: 230 cm³/min - Drilling: Ø 40 mm - Tapping: M30

Condition: used, Year of construction: 1951, Technical details: turning diameter over bed: 400 mm turning diameter over support: 240 mm turning length: 1100 mm centre height: im Bett gemessen: 190 mm spindle passage: 40 mm range of revolution per miute: 37,5 - 950 U/min total power requirement: 3,5 kW tailstock quill taper MT: MK 4 tailstock quill: 180 mm weight of the machine ca.: 1,6 t dimension machine xH: 2,6 x 1,4 x 1,3 m The lathe is equipped with threading device. It is rewired and a new control cabinet is made. Emergency stop switch and chuck protection 3-jaw chuck Ø 250mm rotating tip Tool support quadruple steel holder Ledpfxeu Ix Hdj Agrjai tool support approx. 30° right/left swiveling 4 Stück Wechselräder Copying device (taper 15° right/left) *

Condition: new, The Roturn 400 C is a high-performance CNC Slant Bed Lathe designed for precision and efficiency in the category of 2-axis CNC Lathes. This machine exemplifies the robust capabilities typical of the ROTURN C series, featuring advanced Siemens 828 D Basic control technology, which ensures compatibility with current standards. It is equipped with a powerful 15 kW main spindle motor, an 8-station tool turret for rapid tool changes, and a hydraulic 3-jaw chuck with a through-hole. The inclined bed design promotes rigidity and ease of chip removal, while precise linear guides enhance stability under high loads. A hydraulically operated tailstock with 85 mm stroke, automatic central lubrication, and a high-performance coolant system are among the included standard equipment. Buyers can expect a versatile machine that meets complex manufacturing demands. To explore the capabilities of the Roturn 400 C further, request a quote today for this CNC Slant Bed Lathe, and experience the advantages of investing in a quality tool from KNUTH. Lodpfx Agou E Hytjrsai

Condition: used, mileage: 430,269 km, power: 331 kW (450.03 HP), first registration: 09/2022, overall weight: 26,000 kg, fuel type: diesel, color: red, axle configuration: 3 axles, brakes: retarder, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Retarder, emergency brake assist, lane departure warning, adaptive cruise control, ESP (electronic stability program), ABS, traction control, differential lock (rear axle), hill start assist, start assist, cruise control, navigation system, SCANIA PREMIUM infotainment system, reversing camera, automatic climate control, auxiliary warm air heater, multifunction steering wheel, gear selector on steering column, driver's comfort suspension seat, refrigerator, one sleeper berth, roof hatch, heated and electrically adjustable exterior mirrors, electric windows for driver and passenger doors, central locking with remote control, fog lights, air suspension with lifting and lowering function (rear axle), steered lift axle, ALCOA aluminium rims, MEILLER hooklift system type RL 18.65, maximum lifting capacity 18,000 kg, remote control, hydraulic container interior locking, Ringfeder trailer coupling, Duo-Matic brake connectors. Vehicle may be fitted with advertising decals and/or lettering. Our offer is generally without a new TÜV (technical inspection). Should you require a new TÜV inspection, we will be happy to provide you with an offer from our partner workshops! Vehicle may be fitted with advertising decals and/or lettering. Our general terms and conditions of delivery and payment apply. Lsdpfx Agjxycb Uorsai We are happy to provide you with a financing or leasing offer for this vehicle. Please contact us!

Condition: used, Year of construction: 2023, controller manufacturer: Siemens, controller model: 828D - ShopTurn, _____ Description: Year of manuf. : 2023 Control : Siemens 828D - ShopTurn Turning diam. : 360 mm Turning length : 520 mm Main spindle: Technology:Belt spindle Speed:6,000 rpm Power (max.):18.5 kW Bar capacity:52 mm Workpiece clamping:3-jaw chuck, Samchully MH-206 V1 Tool holder: Technology:12-station turret Tool holder:BMT55 Tool drive:5,000 rpm Features/Accessories: Chip management:Chip conveyor Coolant management:IKZ pump with oil skimmer and high pressure, 10 bar Tool measurement:Automatic measuring arm Automation:Prepared Finished part removal:Parts catcher with collection box Setup operation:Electronic handwheel Lasdpexybxxjfx Agrei

Condition: used, Year of construction: 2009, Machine Designation: Vertical Machining Center LCV-760 (Moving Column Type) Manufacturer: LEADWELL CNC Machines Mfg. Corp., Taichung, Taiwan Type / Model: LCV-760 Control System: FANUC Oi-MD Technical Specifications • Working Area / Travels: - X-axis travel: 760 mm - Y-axis travel: 610 mm - Z-axis travel: 610 mm - Distance from table (pallet) top to spindle nose: 150 – 760 mm - Distance from column front to spindle center: 718 mm - Table dimensions: 850 × 600 mm - Maximum workpiece weight: 400 kg - Table configuration: M16 × P2.0 mm T-slots - Table height (floor to table top): 1,033 mm • Spindle / Drive: - Spindle speed: 10,000 rpm (optional: 12,000 rpm) - Spindle drive motor: 18.5 / 24 kW (30 min / continuous duty) - Maximum spindle torque: 95 Nm (67.5 ft-lb) - Spindle taper: 7/24 TAPER No. 40 (BT-40) - Spindle bearing inner diameter: 70 mm - Tool clamping force: 1,200 kgf - Transmission: HT.D belt drive - Spindle oil chiller: included - Rigid tapping: standard • Feedrates: - Rapid traverse (X / Y / Z): 32 / 32 / 32 m/min - Cutting feedrate: 10 m/min - Jog feedrate: 2,500 mm/min • Automatic Tool Changer (ATC): - Type: Arm-type changer - Tool capacity: 30 tools - Tool taper: BT-40 - Retention knob: MAS P40T-1 (JIS B-6339) - Max. tool diameter (adjacent): 80 mm - Max. tool diameter (free): 100 mm - Max. tool length: 250 mm - Max. tool weight: 7 kg - Tool change time (tool-to-tool): 2 s - Chip-to-chip: 6 s • Automatic Pallet Changer (APC): - Number of pallets: 2 - Change method: hydraulic swapper - Pallet change time: 12 s • Motors: - Spindle motor: 18.5 kW (24 HP) - X-axis feed motor: 4.5 kW (6.4 HP), 30 Nm torque - Y-axis feed motor: 4.5 kW (6.4 HP), 30 Nm torque - Z-axis feed motor: 3.88 kW (5.4 HP), 22 Nm torque - Hydraulic pump motor: 3 kW - Lubrication pump motor: 0.01 kW - Coolant pump motor: 0.76 kW Lsdpfx Ajxnki Aegrjai • Guideways: - X-axis: SNS45C2SSCOEx3 (600 mm width, 1,000 mm distance) - Y-axis: SNS45LC2X151SLHx2 (600 mm width, 600 mm distance) - Z-axis: SHS45R2SSCOEx1305×2 (500 mm distance) • Utilities / Connections: - Power supply: 45 kVA - Compressed air: 0.6 MPa (87 psi), 400 L/min - Hydraulic oil tank: 400 L - Lubrication tank: 2 L - Coolant tank: 300 L • Dimensions / Weight: - Machine height: 2,885 mm - Machine footprint: 3,510 × 2,410 mm - Machine weight: 9,200 – 9,500 kg (approx. 10 t) lifting requirement • Cutting Capacities: - Milling: 230 cm³/min - Drilling: Ø 40 mm - Tapping: M30

Condition: new, The KNUTH Basic 180 Super is a powerful and robust conventional horizontal lathe, designed for metalworking and known as the largest in its category. With an impressive bed width of 206 mm (8 in) and a total weight significantly heavier than similar models, it assures high machining quality ideal for demanding industrial applications. This metal lathe features a cast-iron bed with induction-hardened box ways, a headstock with D1-4′ mount, and a powerful main drive of 2.4 kW, making it perfect for various turning tasks. The Basic 180 Super comes with extensive standard equipment, including a 3-axis position indicator, quick-change tool holder, and a robust coolant system, ensuring efficiency and precision. You can tackle a wide range of projects while benefiting from the rugged construction that minimizes vibrations during operation. For those looking to invest in top-quality equipment, the Basic 180 Super is a standout choice in the category of conventional horizontal lathes and metal lathes. Request a quote now to enhance your workshop's capabilities with this dependable machine. Lajdjuygz Tspfx Agrji

Condition: as good as new (ex-display), The TDM S 430/1000 is a highly versatile Conventional Horizontal Lathe from KNUTH, designed to meet the demands of both single part and small batch productions in tool making and device construction. With an inverter that allows spindle speeds of up to 2,000 rpm and a user-friendly control panel, this lathe is ideal for training applications. Its robust construction features a one-piece heavy-duty cast-iron bed, ensuring increased rigidity and stability during operation. A modern 3-axis position indicator, adjustable longitudinal stops for automated feed shut-off, and a powerful coolant system further enhance its functionality. The TDM S 430 also includes an easy-to-read digital display for spindle speed, ergonomic selector levers for effortless control, and comprehensive standard equipment such as a 4-station tool holder and a robust LED work lamp. Experience precision and efficiency in your machining tasks with the TDM S 430/1000. Request a quote today to explore how this exemplary Conventional Horizontal Lathe can elevate your production capabilities. Laedpfx Aeuyg Dnjgrei

Condition: new, The Roturn 402 C, a cutting-edge CNC Slant Bed Lathe, exemplifies the robust performance and precision that KNUTH machines are known for. Incorporating the Siemens 828 D Basic control, this CNC production lathe is designed to meet the demands of modern machining technology. Its inclined bed design coupled with an 8-station tool turret and a powerful 15 kW main spindle motor ensures efficient operation and versatility. The machine can handle workpieces with a maximum turning diameter of 400 mm and length of 420 mm. Moreover, it features a reliable hydraulic 3-jaw chuck with a through-hole and a hydraulically operated tailstock, both key for precise machining. The standard equipment package includes a high-performance coolant system, an automatic central lubrication system, and a hinged belt conveyor to facilitate effective chip removal. With its substantial machine frame and precise linear guides, the Roturn 402 C is engineered for stability and accuracy, even under heavy loads. For those seeking a reliable and efficient CNC Slant Bed Lathe, the Roturn 402 C is an excellent investment. Request a quote today to enhance your machining capabilities. Lsdpfx Aeng Ah Rjgrsai

Condition: new, The Turnado 230/1000 PRO is a high-performance Conventional Horizontal Lathe from KNUTH, designed for precision and efficiency in your machining tasks. This Engine Lathe represents the modern evolution of classic lathes, boasting features developed over 20 years of successful performance. It offers an ergonomic design that enhances usability, while the sturdy machine bed, solid headstock, and robust cast-iron stand ensure stability and longevity. With infinitely variable speed ranges and a powerful main spindle drive, it guarantees consistent cutting speeds and excellent surface quality, including high-precision pre-loaded spindle bearings for superior concentricity. Equipped with a 3-axis position indicator, quick change tool holder, and a comprehensive standard equipment package, this machine simplifies maintenance and maximizes productivity. Experience the next generation of lathe technology; request a quote today for the Turnado 230/1000 PRO and elevate your workshop with this reliable Engine Lathe, a benchmark in the Conventional Horizontal Lathes category. Lodpfx Ajngzzksgroai