Used Haco Hslx 3013 for sale (81)

Condition: good (used), Year of construction: 2001, Used HACO guillotine shear Iodexwkcnepfx Adnoa Model HSLX 4006 Capacity: 4050 x 6 mm Electrically adjustable back gauge, cutting angle, and blade gap

Condition: used, Year of construction: 2009, sheet width 4050 mm plate thickness 6.50 mm thickness at "Niro-steel" 4.00 mm back stop - adjustable 1000 mm no. of strokes 6 - 11 Hub/min work height max. 880 mm Control SC 70 cutting angle 0.5 - 3.0 ° down holder 23 Stück engine output 11.0 kW weight of the machine ca. 7500 kg range L-W-H 4950 x 1950 x 1720 mm Machine made from light metal production (ALU) good condition including special accessories such as sheet metal holding device - in checked condition - machine video - ?v=pv7RRijDXJA Furnishing: - electro-hydraulic/blade-guided guillotine shears - HACO CNC control model SC 70, swiveling at the front left * Pre-selection positioning of the backgauge * Digital display of actual position value * electro-hydraulic cutting angle adjustment * electro-hydraulic cutting gap adjustment * programmable retraction from the backgauge * Programmable cutting length limit * Emergency switch - electro-hydraulic cutting gap adjustment - electro-hydraulic cutting angle adjustment - electro-motorized back gauge, on ball screws - hydraulic hold-down devices - front finger protection - Ball rollers in the support table - 1x side stop, with mm scale - 1x freely movable foot switch - rear guard Ijdpfoxaccrjx Adnoa - original operating instructions including CE declaration Special accessories included: - pneumatic sheet metal holding device for thin sheet metal blanks * for sheet thicknesses up to max. 4.0 mm * optimal positioning of thin sheets

Condition: excellent (used), Year of construction: 1994, Hydraulic guillotine shear Fab. HACO Typ. HSLX 3000x6/8mm Year 1994 Technical data Make: HACO Type: HSLX 3006 / 8 Year of manufacture: 1994 sheet width: 3050 mm sheet thickness: 6 mm / 8 mm on 1000 mm sheet length cutting angle: 0.5 - 3 number of strokes: 9/17 drive motor: 11 kW number of hold-downs: 18 pcs. space requirement: approx. 3,7 x 1,7 /additional lay-on arms) x 1,6 mm Machine weight: approx. 6 t Equipment - autom. cutting angle adjustment Isdelp Nrbspfx Adnoa - Automatic cutting gap adjustment - Cutting line illumination - Support arms - Knife with 4 cutting edges - Cutting length limitation - CNC backgauge 705mm adjustment range 705 mm - angular stop - Instruction manual All data without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Year of construction: 1997, condition: ready for operation (used), A Haco hydraulic shear is available. Working width: 4000mm, max. sheet thickness: 8mm, cutting angle range: 0.5°-3°, stroke rate: 11 strokes/min, backgauge: 1000mm, machine dimensions X/Y/Z: approx. 5000mm/2000mm/1800mm. On-site inspection is possible. Ijdpfjwr Dwqjx Adnea

Condition: repair required (used), Year of construction: 2015, Manufacturer Haco Machine No. HSLX 3006 Description Hydraulic Shears Replacement Blades Ijdst Rh Dijpfx Adnsa Type: HSLX 3006 Manufacturer: Haco Year: 2015 Control: SC 100 Graphic touchscreen Automatic adjustment of cutting gap and cutting angle Programmable cutting length Memory capacity: 500 programs The machine is in good condition and fully operational. The Haco HSLX 3006 is a hydraulic guillotine shear, a machine used in metalworking for cutting sheet metal with precision. These machines are commonly used in various industries, including metal processing and manufacturing. Here are some possible specifications and features of the Haco HSLX 3006 1. Cutting capacity: The "3006" in the model name typically refers to the shear's maximum cutting capacity. In this case, the shear may be capable of cutting materials up to 3 mm thick and 6,000 mm (or 6 meters) long. 2. Hydraulic Operation: Guillotine shears like the Haco HSLX 3006 are powered by hydraulic systems that provide the power required to cut through metal. 3. Precision Cutting: These machines are known for their accuracy and precision, making them suitable for various cutting tasks in metalworking. 4. Backgauge: Many guillotine shears are equipped with a backgauge system that enables accurate and repeatable cuts by controlling the position of the workpiece. 5. Safety Features: Guillotine shears are equipped with safety features to protect the operator, including guards and emergency stop mechanisms. The guillotine shear has been dismantled for 4 years and is stored in a closed warehouse. It also comes with a new set of blades. Unfortunately, the computer/control unit is missing. According to the manufacturer, this will cost €4,000. We would be happy to organize transport for you and also take care of proper loading. The system is open for inspection; it is located in the city of Ptuj, Slovenia.

Condition: used, Year of construction: 2021, sheet width 6020 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm back stop - adjustable max. 1000 mm work height max. 1030 mm no. of strokes 5 - 10 Hub/min cutting angle 0.5 - 3.0 ° down holder 33 Stück Control SC 100 T engine output 11.0 kW weight of the machine ca. ca. 27000 kg range L-W-H 7650 x 2400 x 2885 mm New price in 2021 ~ 160.000 Euro Special price upon request Equipment: - Robust electro-hydraulic guillotine shear * Design: Guide rail - HACO CNC control model SC 100 T, pivoting at the front left * Control unit with LCD display * Pre-selected positioning of the backgauge * Digital display of actual position * Electro-hydraulic cutting angle adjustment * Electro-hydraulic cutting gap adjustment * Programmable retraction from the backgauge * Programmable cutting length limitation * Automatic + manual programming mode * Emergency stop switch - CNC electro-motor-driven material/backgauge * On recirculating ball screws * Continuous adjustment up to max. 1,000 mm - CNC electro-hydraulic cutting gap adjustment - CNC electro-hydraulic cutting angle adjustment - Hydraulically operated Material/sheet metal clamp Iodexaa Dgopfx Adnea - Front finger guard - Front support table with recessed grips - 1x side stop with mm scale - 1x freely movable foot switch - Rear safety device (light barrier) - Operating instructions (PDF) Optional accessories included: - Sheet metal holding device for thin sheet metal blanks * Optimal positioning of thin sheet metal

Condition: new, Year of construction: 2025, 3050 mm Isdpfx Adowp Tdusnsa 13,0 mm 0,5-2,5 ° 1000 mm work height max. 900 mm

Condition: good (used), HACO - Atlantic HPA 30 - 135 / Good condition with tools - Press force 135 tons - Bending length 3050mm - Passage between the stands 2550mm - Complete upper beam / tools and separate segments in various lengths - Two dies - Motorized height adjustment - Manual back gauge - Front support 2x - Foot switch / hand switch Dimensions: LxWxH 4x1.8x2.4 meters / Weight 8500Kg Ijdpfx Adewqx E Hjnoa Errors / input mistakes reserved

Year of construction: 1994, condition: used, Hydraulic control block for hydraulic pump, hydraulic unit, control block, hydraulic control block, control unit, control valve, servo valve -Manufacturer: HACO, hydraulic control block from press brake type PPES 30135 -Control valve: hy hydraulic ring WLL43G06P012KB4 / WEF42A06C1 -Lifting magnet: Magnet-Schulz G RF Y 045 F20 E11 -Individual components: Type/number see photos Iedpfx Asrqin Uodnja -Dimensions: 540/380/H400 mm -Total weight: 23 kg

Condition: used, CNC control, PLC control, electronic modules, PLC module, plug-in card circuit board, circuit board, circuit board -Manufacturer: Baldor, circuit board electronic module circuit board from press brake HACO PPES 30135 -Type: TEM 060-06-01-1 -Individual components: see photos -Dimensions: 165/100/H250 mm Ijdpfx Asrd Adqodnea -Weight: 0.9 kg

Condition: used, Digital ruler for press brakes, bending benches, guillotine shears... Glass ruler, glass measuring rod, scale, digital display, measuring rod, length measuring system, length measuring device, linear scale, positioning display, digital scales, linear encoder -Manufacturer: RSF Elektronik, linear encoder from press brake HACO type PPES 30135 -Type: MSA 3502 -Measuring length: approx. 270 mm -Quantity: 2x encoders available -Price per piece Isdpfx Aerdil Hjdnoa -Dimensions: 500/150/H50 mm -Weight: 5.4 kg/pc.

Year of construction: 1994, condition: used, Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer, control transformer, safety transformer -Manufacturer: GME, transformer from press brake HACO PPES 30135 -Type: STMU -Technical data: see photo nameplate -Dimensions: 150/100/H235 mm -Weight: 9.6 kg Ijdpfxorgbvrj Adnea

Condition: used, CNC control, card slot, control cards, plug-in cards, circuit boards, control -Manufacturer: Robosoft, control unit from press brake HACO type PPES 30135 -Type: HACC 013 -Dimensions: 100/85/H80 mm -Weight: 0.2 kg. Iedorgbuxspfx Adnja

Condition: used, Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller, servo module, axis amplifier, DC converter, axis amplifier, velocity control unit, spindle amplifier module, control unit -Manufacturer: Robosoft, control unit from press brake HACO type PPES 30135 -Type: 411-1084 / 412-0112 / 412-0094 see photo nameplate -Dimensions: 295/190/H145 mm Iedpjrdil Rjfx Adnea -Weight: 2.5 kg.

Condition: used, CNC control, card slot, control cards, plug-in cards, circuit boards, control rack -Manufacturer: Robosoft, control rack from press brake HACO type PPES 30135 Isdsrd Admepfx Adnsa -Type: PC 10-39 -Power supply card: 338-0180V2 -CPU card: 338-0159V2 -Power supply card: 338-0200V3 -Individual components: see photos -Price/sale: complete -Dimensions: 315/215/H210 mm -Weight: 5.1 kg

Year of construction: 1994, condition: used, Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer, control transformer, safety transformer -Manufacturer: Trafomodern, transformer from press brake HACO PPES 30135 -Type: TS 1.2 -Primary: 220/550V -Secondary: 15-220V -Technical data: see photo nameplate Ijdpfx Adsrgbvvenea -Dimensions: 170/150/H180 mm -Weight: 10.6 kg

Condition: used, Control unit, control panel, control panel, control unit, keyboard, screen, control -Manufacturer: HACO, control panel with foot switch from press brake type PPES 30135 -Footswitch: Amber, with 2 pedals -Connections: see photos Isdsrc Ik Ujpfx Adnoa -Dimensions: 800/740/H1095 mm -Weight: 25 kg

Year of construction: 1994, condition: used, hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Bucher, hydraulic unit from press brake HACO type PPES 30135 -Hydraulic pump: type QT43-020R -Engine: EMI 14.9 kW / 1460 rpm -Individual components: see photos -Dimensions: 970/420/H370 mm Iodpfx Aerc Ilkodnsa -Weight: 185 kg

Year of construction: 1994, condition: used, CNC control, PLC control, electronic modules, PLC module, plug-in card circuit board, circuit board, circuit board, main relay board -Manufacturer: Robosoft, main relay board from press brake HACO type PPES 30135 -Type: PC15 PPESV2 Iodpforgbvnex Adnsa -Board: 338-0149V3 -Dimensions: 400/200/H85 mm -Weight: 2.2 kg.

Year of construction: 1994, condition: used, Crowning for press brake, bending bench, die holder with displacement device Iodpfordil Ajx Adnoa -Manufacturer: HACO, die holder with crowning for press brake type PPES 30135 -Matrix length total: 3050 mm -Individual components: see photos -Transport dimensions: 3570/260/H405 mm -Weight 374 kg

Condition: used, Year of construction: 2009, total length: 5,500 mm, total width: 2,300 mm, total height: 2,900 mm, Weight: 18.700 kg Price: On request - Year: 2009 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 83261 - Drive system: CNC - Control system brand: HACO - Control system type: BC59T Graphics - Number of axes [pcs]: 6: Y1+Y2+X+R+Z1+Z2 - Press force [ton]: 250 - Max. working width [mm]: 4300 - Column gap [mm]: 3800 - Backgauge depth [mm]: 1000 - Crowning system: CNC-controlled - Punch holder: Quick-release - Options: Finger safety guard - Transport dimensions: 5500mm x 2300mm x 2900mm (l x w x h) - Transport weight [kg]: 18700kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Iedpfx Adsxrl Hdjnoa Lukas van Rossum

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, control type: NC control, actuation type: hydraulic, sheet thickness (max.): 6 mm, back gauge adjustment: motor-driven, back gauge travel distance Z-axis: 600 mm, pressure (max.): 310 bar, hydraulic flow rate: 25 l/min, Cutting length: 3200 mm Cutting thickness at 45 kg/mm²: 6 mm Cutting thickness at 60 kg/mm²: 4 mm Blade gap adjustment: included Isdpfjxz Aa Hsx Adnsa Backgauge travel: 600 mm Year: 2014

Condition: used, functionality: fully functional, Year of construction: 2004, Shear: HACO TS 3006 Working length: 3050 mm Capacity regular steel: 6 mm (400 N/mm²) Back gauge length: 750 mm (motorized) Isdexy Illjpfx Adnsa Controller: SP 8 Blade clearance: manual Condition of blades: good Minimum cutting angle: 0.5° Maximum cutting angle: 3° Number of hold-downs: 13 Length and number of sheet supports: 8 × 500 mm, 1 × 1000 mm (left stop + measuring bar) Equipped with sheet support device: No Strokes per minute at smallest angle: 10-15 Strokes per minute at largest angle: 6 Working height: 770 mm Motor power: 7.5 KW Total length: approx. 3880 mm Total height: approx. 1700 mm Total width: 1650 mm Weight: approx. 4500 kg Year of manufacture: 2004 Delivery and installation at your location are of course possible; delivery charges and any additional costs in consultation. Since 2019, we have been the Dutch dealer for HACO press brakes and shears. In addition to selling sheet metalworking machines, we offer a complete package for service, maintenance and repairs.

Condition: new, Year of construction: 2026, 150 t 3100 mm 2600 mm 400 mm 200 mm 600 mm Isdpfxswyd Ths Adnja

Condition: excellent (used), functionality: fully functional, Year of construction: 1989, Haco hydraulic guillotine shear type TS 406 working width 4050 mm Iodpfoxwmv Djx Adnja maximum sheet thickness 6 mm motorised back gauge cutting gap adjustment cutting angle adjustment